hello
I must do a hard reset my htc 4242
I follow the procedure and nothing happens
power off deviceVOLUME DOWN and ENTER buttons, And Then The press POWER button
Is there another procedure?
<1> hard reset by clear storage
1) start -> setting -> system tab -> clear storage
2) password = 1234
3) yes
<2> hard reset by press buttons
1) press & hold volume down button + Action button
2) press reset
3) wait until u see the message -> release all buttons
4) press volume up button = HR, press the others if u won't
hope it should b help
my htc doesn't start!
after installed tomtom and would making an soft reset its not starting. the screen is red-green-blu-white and i canot make hard reset... what can i do?
thank you very much Kanikaze for your information
Related
Hello all,
I install aku2 and all ok, i install resco explorer and keyboard pro but when i reboot le 9100 it's appears a withe screen and the 9100 was freezed. i want to do a hard reset but the 9100 only do a soft reset and freeze in a withe screen. thx for all for help
Have you tried the following steps for a hard reset?
# Press and hold both the Comm Mannager Button and the Voice Command Button
# While keeping those two buttons pressed, press the Reset Button with your stylus
# After about a second you will be prompted for confirmation. Press the Talk Button to confirm
This should hard reset your phone. Let us know how you get on.
try to keep and hold comm manager button, voice command button and power button together
yes y tried the hard reset but nothing:
hold comm mannager and voice command and reset button.
go to the wizard mod forum and find out how to do the USB boot and reflash your device
thats my suggestion
try without reset button but keep and hold comm, voice and power on button in my phone work in this way
Now, I'm confuse to hard reset about Jade. Anyone can tell me?
To perform a hard reset
1. Power off your device.
2. Press and hold the VOLUME DOWN and ENTER buttons, and then press the
POWER button.
"The following message then appears on the screen:
This operation will delete all your personal data, and reset all settings to manufacturer default. Press Volume Up to restore manufacturer default, or
press other keys to cancel."
3. Press the VOLUME UP button to perform the hard reset, or press any other
button to cancel the reset.
... 2. way:
1. Power off your device.
2. Press and hold the VOLUME DOWN and ENTER buttons, and then press the
RESET button. (...the Red Button under the cover on the backside)
Now you will become a "Boot-Screen-Message"
3. Press the VOLUME UP button to perform the hard reset, or press any other
button to cancel the reset.
The post from taksina is the same like the information in the user-manual... but it dosen't work at my HTC Jade!
What's the method that working with jade?
... my way ;-)
tested yesterday
The first way also working. I've tested it.
btw the first method is written in user manual CD
can't work both of them. I just test.
Way 3
kreissaege said:
1. Power off your device.
2. Press and hold the VOLUME DOWN and ENTER buttons, and then press the
RESET button. (...the Red Button under the cover on the backside)
Now you will become a "Boot-Screen-Message"
3. Press the VOLUME UP button to perform the hard reset, or press any other
button to cancel the reset.
Click to expand...
Click to collapse
OK following the indication of this method I have succeeded in making a Hard Reset of the Jade 100 (Touch 3G).
Here as I have done (way 3):
1. Power ON the device
2. Press and Hold for 10 seconds contemporarily VOLUME DOWN + ENTER (central key on the frontside) + RESET (the red button under the cover on the backside).
3. The device will be restarted and will ask to press VOLUME UP to complete the reset.
It works so well that after a week of test the shop where I have bought him has replaced it with another model (I am waiting for the HD )
Ciao!
1. Power ON the device
2. Press and Hold for 3 seconds contemporarily VOLUME DOWN + ENTER (central key on the frontside) + RESET (the red button under the cover on the backside).
3. The device will be restarted and will ask to press VOLUME UP to complete the reset.
100% working for HTC Touch 3G - Hard Reset
You could also try.
1: Start
2: Settings
3: System
4: Clear storage
5: Write 1234
6: Press yes
Thank you, Now I can.
taksina said:
To perform a hard reset
1. Power off your device.
2. Press and hold the VOLUME DOWN and ENTER buttons, and then press the
POWER button.
"The following message then appears on the screen:
This operation will delete all your personal data, and reset all settings to manufacturer default. Press Volume Up to restore manufacturer default, or
press other keys to cancel."
3. Press the VOLUME UP button to perform the hard reset, or press any other
button to cancel the reset.
Click to expand...
Click to collapse
thks this metod work fine
taksina said:
To perform a hard reset
1. Power off your device.
2. Press and hold the VOLUME DOWN and ENTER buttons, and then press the
POWER button.
"The following message then appears on the screen:
This operation will delete all your personal data, and reset all settings to manufacturer default. Press Volume Up to restore manufacturer default, or
press other keys to cancel."
3. Press the VOLUME UP button to perform the hard reset, or press any other
button to cancel the reset.
Click to expand...
Click to collapse
Worked, thanks
Edit: Sorry for the necro-post, forgot i found the thread trough search and that it was a little old.
vixen357ka said:
1. Power ON the device
2. Press and Hold for 3 seconds contemporarily VOLUME DOWN + ENTER (central key on the frontside) + RESET (the red button under the cover on the backside).
3. The device will be restarted and will ask to press VOLUME UP to complete the reset.
100% working for HTC Touch 3G - Hard Reset
Click to expand...
Click to collapse
Thanks Working 100% tested by me
hello
i tried all the method to do a hard reset and nothing
help
Dadiio said:
hello
i tried all the method to do a hard reset and nothing
help
Click to expand...
Click to collapse
Perhaps you bought a clone? They have different ways to start hardreset.
I have a HTC Touch QUALCOMM ® 7225 + G-Sensor, I can not do hard reset
The method 3 it's not working. Also method 2 and 1 either. RESET key on the back side isn't the red one. Sory gays, but for me that's all not working. My is HTC Jade 3G 100 not a clone. Sorry...
For Clones,
This is how to reset a clone if all methods tried and didn't work, turn off phone, while pressing and holding green and red buttons at the same time, press on/off button on top for 3 secs , you will see a white screen, then let go all buttons, the phone will start to hard reset.
Quimera2k said:
You could also try.
1: Start
2: Settings
3: System
4: Clear storage
5: Write 1234
6: Press yes
Click to expand...
Click to collapse
if u do the above remove ur SD card
THIS IS HOW I DO IT AND IT WORKS
1.Power off the Phone
2.Press volume down button and also Press down the black center button
3. while continuing do the above Power on the phone
4. Now u will get a while screen asking u to press the volume up button
to do the hard rest press the same its done
goodluck
It took me ages to figure this one out! It doesn't tell you in the manual how to do when you've been locked out, and no one has put anything online that I can find yet, so I guess I'll be the first to report it:
1. Power on the device (has to be off first of course)
2. Press and hold the Home button
3. Wait until you see the exclamation mark and phone image
4. Press the Home + Power button together
5. Select factory reset from the menu that appears
that's it.
Thanks mate it will help when i get mines later on today.
can you please describe it detailed when i have to press home again
if i press home + back it flashes the screen...
is Home + Power button no the back.
hard reset
nothing happens
I'm not sure this is what you're looking for but there's a factory data reset in Menu -> Settings -> SD card & phone storage -> Factory data reset.
with the phone off, it's better to hold the home key and then press and hold the home button.
Also, already discussed here - http://forum.xda-developers.com/showthread.php?t=503264
BigRD said:
I'm not sure this is what you're looking for but there's a factory data reset in Menu -> Settings -> SD card & phone storage -> Factory data reset.
Click to expand...
Click to collapse
This worked for me.... thanks
Perfect. Thanks for the info.
Sorry if this is dumb question. I am still new to HTC Magic...
If you flashed a custom recovery image, wouldn't HOME + END/PWR give you a different screen, instead of the exclamation point?
Also, I think there are 3 modes?
- FastBoot
- Recovery
- HBOOT
What is HBOOT for?
sapp100
this worked for me for my sapp100 android:
press home and back button then pwr on for 2 sec will ask you if you want to clear and reset just follow writing and 100% ok
The lolite of a friend won't startup, after about 1 minute there is a message in the display
"The device is unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source. Press SEND to reset your device or press any other button to cancel."
none of te buttons work. The only thing I can do is to take off the battery
Info Phone:
R 0.41.30.12
G 12.41.30.16H
D 1.09.40104
Official rom update won't work
Next message is shows this:
error (294): invallid vendor ID
HDa4-IPNL5567-HUEbc568-IPNL55670
Help me. I don't know what to do.
Have you tried to hard reset the device?
1. Power off the device.
2. Press and hold the VOLUME DOWN & ENTER buttons, and then press the POWER button.
3. You will see a warning message.
4. Press VOLUME UP to Hard Reset or other button to cancel
//////////////////////////////////////////////////////////////////////////
dancer_69 said:
Have you tried to hard reset the device?
1. Power off the device.
2. Press and hold the VOLUME DOWN & ENTER buttons, and then press the POWER button.
3. You will see a warning message.
4. Press VOLUME UP to Hard Reset or other button to cancel
//////////////////////////////////////////////////////////////////////////
Click to expand...
Click to collapse
Thanks it works
wtpooh said:
Thanks it works
Click to expand...
Click to collapse
i have done this, but dont work by me...it is an other way to save my Iolite, it does not work, it does nothing, like a dead mobile phone....help me somebody!!!
updated Kitkat firmware flasher (no firmware included)
instructions in download
use at own risk
downgrading requires Unlocked Boot Loader and a full factory wipe / reset before downgrading
https://mega.co.nz/#!Ct9CQL4a!8c_q2nfGUZdz3MRtd_iKMU4K-8AacAw180VG46jWLVE
IF YOU DIRTY FLASH 5.0.2 TO 4.4.4 YOU WILL GET A SOFT BRICK
AND WILL NEED TO
External Reset
If you are unable to access the phone's menu to perform the standard reset you can attempt an external factory reset.
Notes:
When using this feature; everything is deleted from the device.
Reset will require a minimum battery level of 25%. If you are unable to perform a reset, please charge for 20-30 minutes and try reset again.
1. With the phone powered off, press the VOL DOWN KEY for 2-3 seconds then POWER key then release.
2. The device will display different BOOT OPTIONS
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to select
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL UP key for 10-15 seconds. While still holding the VOL UP key tap and release the POWER key
Tip: You can try this step, holding the phone in landscape. If you are stuck on step 6, try a force reboot by pressing the Power key and Vol Down key, and start the process again.
6. The device will display additional menu options (Text will appear in BLUE)
7. Use the VOL DOWN Key to scroll to Wipe data / factory reset and the POWER Key to select this option
8. Use the VOL DOWN key again to select YES - delete all user data and press the POWER key to CONFIRM
9. Once the Formatting is complete, press the POWER key to confirm a REBOOT
10. The device will reboot and start the normal power up sequence