Database Users

Stock Rom files Unrooted?

If this has already been answered I apologize. I am looking for the stock files to flash in Odin for the Continuum in case of disaster. I am going to root my wifes phone to remove the bloatware and if there is one thing I learned with my fascinate is those files are priceless. Anyone know where I can get the stock files to start over is I need to?

Legato525 said:
If this has already been answered I apologize. I am looking for the stock files to flash in Odin for the Continuum in case of disaster. I am going to root my wifes phone to remove the bloatware and if there is one thing I learned with my fascinate is those files are priceless. Anyone know where I can get the stock files to start over is I need to?
Click to expand...
Click to collapse
We have some odin files, but they're untested. They are also rooted :-/
If we can get someone to test our DJ20 odin files, then I'm sure someone can figure out how to remove root from them.

dfgged said:
We have some odin files, but they're untested. They are also rooted :-/
If we can get someone to test our DJ20 odin files, then I'm sure someone can figure out how to remove root from them.
Click to expand...
Click to collapse
I got a stock ROM and kernel from imnuts; would that be the same ones you have?
I flashed that stock ROM and kernel using ODIN on my continuum (which was previously bricked by too much tinkering), and everything works on the phone except for cell data (well, I haven't tested bluetooth on it). If you have different images, I'd be happy to try them out and let you know how it goes.
I also will probably try re-flashing them again just to see if it comes out differently.
-h

yaheath said:
I got a stock ROM and kernel from imnuts; would that be the same ones you have?
I flashed that stock ROM and kernel using ODIN on my continuum (which was previously bricked by too much tinkering), and everything works on the phone except for cell data (well, I haven't tested bluetooth on it). If you have different images, I'd be happy to try them out and let you know how it goes.
I also will probably try re-flashing them again just to see if it comes out differently.
-h
Click to expand...
Click to collapse
That's where I got my images from I here someone may be working to get an official Odin package for you guys though

That's good, if it were my phone I would run some tests, but my wife has seen me brick my phone so many times she is scared to hand me her phone
Sent from my SCH-I500 using XDA App

Your best bet would be FREEZING your bloatware with Titanium backup PRO to see if you encounter any negative side-effects. If so all you have to do is unfreeze. I freeze apps I don't want and after a week (after backing up) I'll go ahead and fully uninstall them. One at a time, so if **** hits the fan, you know what to restore...
Sent from my SCH-I400 using XDA App
Sent from my SCH-I400 using XDA App

[TELUS FASCINATE] Gingerbread released today (Aug 19/11) over Kies

Really odd timing for this one, for me personally anyway. I finally gave up waiting yesterday and tried to install CM7 and bricked my phone. Panicked for a while, then finally figured out forcing download mode with VOLUP+VOLDOWN, connected to USB, while inserting the battery!
Anyway... it's now on Kies for Telus Fascinate. I was hoping this would finally fix GPS, but it's somehow made it completely unusable for me. 0 satellites after several minutes of looking.
Firmware version 2-3-3
Baseband version 2-6-35-7-T959TLKG2
Kernel version 2-6-35-7-T959TLKG2
sj0829-kwon-SEP-08 #2
Build number GINGERBREAD-LKG2
^^^ had to replace decimals with hyphens to appease the "no links posted by newbies" forum rule.

Also, superoneclick can't root this one. Other options?
UPDATE: Root instructions here - [Telus Only][How-To] Root your Fascinate Gingerbread 2.3.3 T959TLKG2

tenthousandfeet said:
Also, superoneclick can't root this one. Other options?
Click to expand...
Click to collapse
I tried flashing Semaphore 1.5 - which is an i9000 kernel for stock JVR - and it wouldn't boot. Went back to LKG2 un-rooted for now.

I'm tempted to try CF-root for the i9000s, but given my recent bricking(s) I'm a bit tired of flashing back to 2.2. Anyone else care to try?
Though it wouldn't necessarily help with root - do you suppose zacharias.maladroit's Neo kernel would work with stock Gingerbread? Supposedly for CM7, but Gingerbread seems close enough.

tenthousandfeet said:
I'm tempted to try CF-root for the i9000s, but given my recent bricking(s) I'm a bit tired of flashing back to 2.2. Anyone else care to try?
Though it wouldn't necessarily help with root - do you suppose zacharias.maladroit's Neo kernel would work with stock Gingerbread? Supposedly for CM7, but Gingerbread seems close enough.
Click to expand...
Click to collapse
so did u try it after?

Trying to root my Girlfriends phone, unfortunately, the gingerbreak exploit has been closed and the 3e recovery won't install unsigned ZIP files.
None of the custom kernels flashable through odin are going to work properly either. you will either end up with an unbootable device, or wonky buttons.
I'm not going to try anything until an odin flashable of the stock kernel is available.
Things like this make me glad I moved my personal phone to the the Nexus lineup.
I guess we wait for the next exploit to be found

Most people who try to install this are getting errors as soon as kies tries to update the phone, where it instantly shuts down and reports numerous signature errors.
Add that you can't root and I think it's borked all around. Thanks for nothing Telus.

harjon said:
Most people who try to install this are getting errors as soon as kies tries, where it instantly shuts down and reports numerous signature errors.
I think it's borked all around. Thanks for nothing Telus.
Click to expand...
Click to collapse
why blame Telus? It is samsungs fault.
Sent from my Nexus S

harjon said:
Most people who try to install this are getting errors as soon as kies tries to update the phone, where it instantly shuts down and reports numerous signature errors.
Add that you can't root and I think it's borked all around. Thanks for nothing Telus.
Click to expand...
Click to collapse
I installed this update yesterday with no problems. Then I tried a rooted i9000 kernel which didn't work, so I had to flash back to 2.2 and update AGAIN via Kies. No problems.

Matridom said:
None of the custom kernels flashable through odin are going to work properly either. you will either end up with an unbootable device, or wonky buttons.
I'm not going to try anything until an odin flashable of the stock kernel is available.
Click to expand...
Click to collapse
The CF-root kernel link I posted earlier should theoretically work, as long as it's bootable. The kernel applies root, which remains even if another kernel is flashed. If it's bootable with wonky buttons then we could then flash another kernel to fix the button mappings. The problem, of course, is that there are no 2.3.3 kernels for the Telus Fascinate, except zacharias.maladroit's Platypus Neo (linked above) which is designed for CM7/MIUI and may or may not play nice with stock Gingerbread.
As I said, I'm sick of reflashing to stock with no backup, so I'm opting out of trying this route. Anyone more adventurous care to give it a try?

tenthousandfeet said:
Really odd timing for this one, for me personally anyway. I finally gave up waiting yesterday and tried to install CM7.
Click to expand...
Click to collapse
Thats hilarious, I installed CM7 yesterday as well. I'm about to Odin back to stock and then update to see how this is. CM7 is a little bit to buggy for me atm.

Does this mean anything for verizon fascinate users?

uzumaki82 said:
Does this mean anything for verizon fascinate users?
Click to expand...
Click to collapse
Nope.
Sent from my Nexus S

Cool. Quick question, does an update through Kies do the Kernel and ROM together? And will a currently installed custom Kernel mess with the update? Thanks!

IronStomach said:
Cool. Quick question, does an update through Kies do the Kernel and ROM together? And will a currently installed custom Kernel mess with the update? Thanks!
Click to expand...
Click to collapse
Yes, the update will overwrite the current rom and firmware. As to your current kernel messing with the update, it depends, I used the stock kernel w/ voodoo and I could update. First I disabled lagfix and root just to be safe.

MrManiacNF said:
Yes, the update will overwrite the current rom and firmware. As to your current kernel messing with the update, it depends, I used the stock kernel w/ voodoo and I could update. First I disabled lagfix and root just to be safe.
Click to expand...
Click to collapse
You disable voodoo and unroot the phone before making the upgrade?
How did you disabled the voodoo and unroot the phone?

johnelway said:
You disable voodoo and unroot the phone before making the upgrade?
How did you disabled the voodoo and unroot the phone?
Click to expand...
Click to collapse
Boot into clockwork recovery (VOLUP+VOLDOWN held while powering on) and there will be a menu for Voodoo with an option to disable. It's probably a good idea to disable it, as everything I've read seems to indicate that new roms with voodoo enable may create problems.
As for root - I can't see that having any effect on flashing a Kies update, but there is an option in superoneclick to unroot.

tenthousandfeet said:
Boot into clockwork recovery (VOLUP+VOLDOWN held while powering on) and there will be a menu for Voodoo with an option to disable. It's probably a good idea to disable it, as everything I've read seems to indicate that new roms with voodoo enable may create problems.
As for root - I can't see that having any effect on flashing a Kies update, but there is an option in superoneclick to unroot.
Click to expand...
Click to collapse
I reflashed back to the stock 2.2 Kernel/ROM just to be safe, and so far the update's great, way faster than before even without Voodoo enabled.

Others are reporting issues with trying to root on 2.3 so I would leave it rooted.
tenthousandfeet said:
Boot into clockwork recovery (VOLUP+VOLDOWN held while powering on) and there will be a menu for Voodoo with an option to disable. It's probably a good idea to disable it, as everything I've read seems to indicate that new roms with voodoo enable may create problems.
As for root - I can't see that having any effect on flashing a Kies update, but there is an option in superoneclick to unroot.
Click to expand...
Click to collapse
Sent from my SGH-T959D using XDA App

I have 2.3 stock rooted, useing the speedmod kernel/stock kernel method on here. I ain't had any problems at all.
As for the speed of the rom, I agree. Its double the speed of froyo, and there is no voodoo. So I can't wait till there is a voodoo or somthing available, I would maybe have to tie it down.
Maniac

problems after installing icecream on my galaxy s2

i have a question, please can help me find or tell me were to find a recovery code for my galaxy s2.
i have tryed to install icecream os on my mobile true the kies program. now pc shut of and i cant go back to original kernel or startup in the download mode
it says firmware upgrade encounterd an issue, please select recovery mode in kies & try again.
but nothing works i tryed Disaster Recovery mode but then they ask a recovery code.
can someone please help me allong.

And people wander why its a closed alpha of ICS

I think you have to flash it from ODIN. If you can enter in Download mode you can fix your problem.

How the heck did you try to install ICS on kies? It's not even released/leaked yet.. ICS is not an OS it's a firmware.. And if you flashed ICS maybe it's from a port here in XDA and it's not stable as of the moment..
Sent from my GT-I9100 using xda premium

Told you not to get sticky stuff which can melt anywhere near your phone .
Can you tell from where you got ICS so we can troubleshoot better.

I doubt he installed ICS... If kies tried to install it, it's prolly some 2.3.5 thingy. To bad he's clueless and leaves us no chance of actually helping him.

TheSaw said:
I doubt he installed ICS... If kies tried to install it, it's prolly some 2.3.5 thingy. To bad he's clueless and leaves us no chance of actually helping him.
Click to expand...
Click to collapse
Yes. That or he's just a troll

I installed ICS alpha 7 on my galaxy s2. Because it has no wifi and the calls and sms are really problematic I wan't to change it back to gingerbread.
I tried using odin and it didnt work, any suggestions?

What process you use to install ICS Alpha7? Do format /system /data and /cache? Or simple Wipe data, cache and dalvik?

Regardless if he should or shouldnt have flashed this, whether its alpha, beta, or fully stable.. One of you could at least helped him.
You need to boot into download mode (down button, home button, and power button. Dont let go until your in download mode)
Then download a stock ROM from here http://forum.xda-developers.com/showthread.php?t=1075278
Id explain the rest, but the guide on there is far better than what my explanation would have been ^^^

Silver420 said:
Regardless if he should or shouldnt have flashed this, whether its alpha, beta, or fully stable.. One of you could at least helped him.
You need to boot into download mode (down button, home button, and power button. Dont let go until your in download mode)
Then download a stock ROM from here http://forum.xda-developers.com/showthread.php?t=1075278
Id explain the rest, but the guide on there is far better than what my explanation would have been ^^^
Click to expand...
Click to collapse
Well said.
If you can't get into download mode using the buttons maybe a usb jig would help. Unfortunately its not much help but that's the only thing i can think of
Sent from my GT-I9100 using XDA App

Thanks so much, it worked!

I see your problem. You're supposed to install ice cream into your mouth.

ayamary said:
I see your problem. You're supposed to install ice cream into your mouth.
Click to expand...
Click to collapse
Was that suppose to be funny? :/
Sent from my GT-I9100 using Tapatalk

I lol'd when he used the word 'true' in place of 'through', now I'm reading the post with an Indian accent

Bricked Galaxy Note! Please Help

Hey guys, I think i may have bricked my SGN.
I rooted via adb and then flashed the abyss kernel followed by stunner ics rom. But when i restarted through CWM the phone never restarted and now it won't even turn on. No download mode either and i've tried every possible trick including the wall outlet.
Phone won't turn on at all. Is this considered hard bricked and has anyone found a solution to this. Will a USB jig work on this.
Also, the stunner ics 4.5 beta showed successfull at CWM so i'm not sure what happened. Battery was fully charged too.

Try taking out the battery for a few minutes, put it back again and try entering download mode again.

What's sky ics rom?
Sent from my GT-N7000 using Tapatalk

hey thanks for the reply, i've tried that already as well. no download mode working here.

itsjiffybruh said:
Hey guys, I think i may have bricked my SGN.
I rooted via adb and then flashed the abyss kernel followed by stunner ics rom. But when i restarted through CWM the phone never restarted and now it won't even turn on. No download mode either and i've tried every possible trick including the wall outlet.
Phone won't turn on at all. Is this considered hard bricked and has anyone found a solution to this. Will a USB jig work on this.
Also, the sky ics showed successfull at CWM so i'm not sure what happened. Battery was fully charged too.
Click to expand...
Click to collapse
hmmm try to pull down battery, put it back again, try to turn on download mode, do this several times if it wont help, try to charge phone and do same. goodluck

sorry, i meant stunner ics. got confused with sky ics cuz i just put that into my friends skyrocket.

You didnt follow the instructions ti install the rom so you now have a brick
Try pluggingn it top the pc , if you hear some noises on the pc then your noté is alive
Sent from my GT-N7000 using xda premium

Well, did you try a USB-jig to force your Note into Download-Mode?
Than you should be able to flash a stock and start over again.
Did you let your Note do the first startup at his own, I've read that the first start may took a bit longer and shouldn't be interrupted?
Regards

thor2001 said:
Well, did you try a USB-jig to force your Note into Download-Mode?
Than you should be able to flash a stock and start over again.
Did you let your Note do the first startup at his own, I've read that the first start may took a bit longer and shouldn't be interrupted?
Regards
Click to expand...
Click to collapse
Well, i was in CWM and then installed the rom then pressed restart phone on CWM menu. Went downstairs and when I came back it didn't turn on.
if it doesn't turn on at all is it a hard brick?
I ordered a usb jig from amazon for $7.00 and it will arrive tomorrow, I heard the usb jig only works on soft bricked phones though and since mines won't even turn on will there be any chance at all of it working?

Hey guys I just realized what went wrong. I download the N7000 Galaxy note roms and kernels instead of the i717 (ATT) versions. Stupid me!
Has anyone ever had success getting a fix on this? If not would I be able to go to an AT&T store and just get a new one? What should I tell them. Please help

itsjiffybruh said:
Hey guys I just realized what went wrong. I download the N7000 Galaxy note roms and kernels instead of the i717 (ATT) versions. Stupid me!
Has anyone ever had success getting a fix on this? If not would I be able to go to an AT&T store and just get a new one? What should I tell them. Please help
Click to expand...
Click to collapse
Your phone may has yellow triangle and flash counters now. So you would not be able to get a new one or order them fixing it for you.
Sent from my GT-N7000 using xda premium

Wow that really sucks . I wish you could fix it soon and please keep us updated with how you fixed if so .
Sent From My Samsung Galaxy Note N7000 Using XDA Premium

.Hell. said:
Wow that really sucks . I wish you could fix it soon and please keep us updated with how you fixed if so .
Sent From My Samsung Galaxy Note N7000 Using XDA Premium
Click to expand...
Click to collapse
Ill definitely keep you guys updated. My usb jig isn't scheduled to arrive until monday so i might just try to go to the att store today and try to get a replacement.

siuming720 said:
Your phone may has yellow triangle and flash counters now. So you would not be able to get a new one or order them fixing it for you.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
how would they be able to test it if it doesn't even turn on?

hi try this not my work dont now if it works
Default Bricked Galaxy Note N7000 or Incorrect ROM Flash Easy Fix
Ok simple you won't see nothing on the screen because the bootloader is wrong.....
Just put the battery in then do following.
1. hold vol down+home+power for 15 seconds...
2. release then press volume up...
Note: Don't worry about seeing anything on the screen or any keys light
it will be blank this is because bootloader is incorrect
3. open odin you should see comxx in listed flash the original bootloader back
into phone this will/should resume visual display.
I have attached necessary files to resume
Load File in PDA NOT BOOTLOODER
4. Wait 10 seconds.. Remove Battery Then Boot Back into Bootloader following steps 1&2
5. finally flash Stock Rom to resume the whole phone to original state.
Hope That Helps......see hear for post http://forum.xda-developers.com/showthread.php?p=23052721#post23052721
Sent from my GT-N7000 using Tapatalk

thanks for the help. i read that on another post and already tried it. unfortunately its a no go.
Just came back from att center and they said that they couldn't replace it for me on the spot because they don't have the phone in stock since its a newer phone. I gotta call the number they gave me now.

Sorry you've run into such a serious issue, but in a few way it's probably quite a good thing it's a hard brick.... It's likely you would have had a raised flash counter and the fact they can't power it on there and then is a bit of a God sent.
Hope you get a replacement soon mate :thumbup:
Sent from my GT-N7000 using xda premium

SpyderTracks said:
Sorry you've run into such a serious issue, but in a few way it's probably quite a good thing it's a hard brick.... It's likely you would have had a raised flash counter and the fact they can't power it on there and then is a bit of a God sent.
Hope you get a replacement soon mate :thumbup:
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
hey, im supposed to send my phone in to them and so your saying that when i send it in they won't be able to find out that i flashed a custom rom and kernel on it?
and im not sure if its such a good thing because if it was at least soft bricked i wouldve been able to fix it most likely. thanks for your help

itsjiffybruh said:
hey, im supposed to send my phone in to them and so your saying that when i send it in they won't be able to find out that i flashed a custom rom and kernel on it?
and im not sure if its such a good thing because if it was at least soft bricked i wouldve been able to fix it most likely. thanks for your help
Click to expand...
Click to collapse
First of all I think It wouldnt have raised the binary counter and give triangle because you didnt use Odin to flash (Am I right?).
Second thing Thought it had given you a triangle since your phone is dead.
So they cant find that you flashed a custom kernel or the binary.

itsjiffybruh said:
how would they be able to test it if it doesn't even turn on?
Click to expand...
Click to collapse
Oh.. I didn't see you can't enter to cwm
Sent from my GT-N7000 using xda premium

[Q] Help unrooting

I wanted to start a new thread since i havent had any luck finding an answer to my question. Basically i need to know how can i unroot my LG G2 LS980 from Sprint. I just want it back to stock. I have tried a few ways (threads in the forums) but after trying fro a few mins they dont seem to work. then when i go to the end of the thread it says these way no longer works. The last one i tried made me download firmware and use the LG Flash tool and change the megalock.dll but after checking all the settings and launching the tool it just sits at 0% forever. I even tried the turn off and put back on download mode again while not closing the tool and it still does the same.
my phone is still on stock recovery, running android 4.2.2 and software version LS980ZV8
I tried doing the OTA that pops up on my phone every other day but it fails to update halfway thru it. Now i want kitkat and i cant update it. I guess worse case i would like to flash a stock rom with kitkat (stock) and still keep it rooted but my issue is im still stuck on ZV8

Well you can easily unroot from inside supersu but if you have modified any part of the system/xposed/removed bloat you will not be able to update unless you flash back to stock
Sent from my LG-D800 running stock kk, rooted with philz using XDA app

XxZombiePikachu said:
Well you can easily unroot from inside supersu but if you have modified any part of the system/xposed/removed bloat you will not be able to update unless you flash back to stock
Sent from my LG-D800 running stock kk, rooted with philz using XDA app
Click to expand...
Click to collapse
i tried that a few days ago and yes, i lose root access but i stil cant do the over the air updates so im still stuck on my current software version... i was thinking maybe i need to flash a stock firmware back on it and try it that way. Is there a way to unroot or reflash the stock firmware back on? I love this phone but when it comes to root/unroot stuff god i miss my S4

sundown13x said:
i tried that a few days ago and yes, i lose root access but i stil cant do the over the air updates so im still stuck on my current software version... i was thinking maybe i need to flash a stock firmware back on it and try it that way. Is there a way to unroot or reflash the stock firmware back on? I love this phone but when it comes to root/unroot stuff god i miss my S4
Click to expand...
Click to collapse
Well have you tried the back to stock thread http://forum.xda-developers.com/showthread.php?t=2432476
Sent from my LG-D800 running stock kk, rooted with philz using XDA app

XxZombiePikachu said:
Well have you tried the back to stock thread http://forum.xda-developers.com/showthread.php?t=2432476
Sent from my LG-D800 running stock kk, rooted with philz using XDA app
Click to expand...
Click to collapse
yeah doesnt doesnt work. i got all files all drivers... flashtool pops up i select the files as per instructions. hit the yellow arrow and it does nothing. sits there. I also did the turn off and back into download mode and it doesnt do anything.

sundown13x said:
yeah doesnt doesnt work. i got all files all drivers... flashtool pops up i select the files as per instructions. hit the yellow arrow and it does nothing. sits there. I also did the turn off and back into download mode and it doesnt do anything.
Click to expand...
Click to collapse
have the same issue on the bottom it shows B80 rooted
ok found the culprit
forgot to change the com to 41 (windows)
after that it worked fine

Sucks being new
So i need at-least 10 post so I can post in a development forum which kinda sucks. I'm not a total noob i don't need help with flashing anything. I have a legitimate question with a problem im having with a rom. Posting this 10 times in random forums to see if I get intermission to post in Development Forum.

Jose Castillo said:
So i need at-least 10 post so I can post in a development forum which kinda sucks. I'm not a total noob i don't need help with flashing anything. I have a legitimate question with a problem im having with a rom. Posting this 10 times in random forums to see if I get intermission to post in Development Forum.
Click to expand...
Click to collapse
that isn't going to work, you are supposed to make at least 10 helpful post in which you well obviously help someone

Honestly the only help I can give you since I'm using an AT&T version is this video: https://www.youtube.com/watch?v=Lg693AYgoTo
I know it's for AT&T but for AT&T and Sprint you use the same method to flash. You just have to replace the .tot and .dll for your sprint phone, because the ones included are for the AT&T version. Other than that the steps are the same.
PS the Development forums are not for Q&A, it's for development and feedback (Like logcats and bug fixes, etc).

registrar said:
have the same issue on the bottom it shows B80 rooted
ok found the culprit
forgot to change the com to 41 (windows)
after that it worked fine
Click to expand...
Click to collapse
thanks man... yeah that did it.. .funny thing was that it was set on 41... i changed it to 45 then back to 41 and it worked right after! xD woot