Related
OK FELLAS,
i'm not a noob. been flashing for a while now and am pretty much tech savvy, but this one has me for a loop. recently, my phone just started doing this; i can install and launch any and all android builds so readily available here from the XDA chefs. EVEN the DARKSTONE DESIRE HD BETA 2 worked and i played with it for an hour or so. HERE IS THE PROBLEM; i used to in the beginning be able to boot android over and over and over with my android launcher icon thats built into the current energy rom im using. (24631 04 sep) however now after a reboot, I run into a brick wall with the prompt that reads "cant find rootfs. you need to unzip a rootfs file to your memory card. job control turned off"
here are the things i have tried to remedy this:
1. format card= didnt fix
2. try a different card= i have 3 different cards; this didnt fix it either.
Only thing i havent tried which i am reluctant to try is task 29 and reload the WINMO ROM.
ANYONE ELSE OUT THERE EXPERIENCING THIS AND IF SO, HOW DID YOU FIX IT?
bluevmax92 said:
OK FELLAS,
i'm not a noob. been flashing for a while now and am pretty much tech savvy, but this one has me for a loop. recently, my phone just started doing this; i can install and launch any and all android builds so readily available here from the XDA chefs. EVEN the DARKSTONE DESIRE HD BETA 2 worked and i played with it for an hour or so. HERE IS THE PROBLEM; i used to in the beginning be able to boot android over and over and over with my android launcher icon thats built into the current energy rom im using. (24631 04 sep) however now after a reboot, I run into a brick wall with the prompt that reads "cant find rootfs. you need to unzip a rootfs file to your memory card. job control turned off"
here are the things i have tried to remedy this:
1. format card= didnt fix
2. try a different card= i have 3 different cards; this didnt fix it either.
Only thing i havent tried which i am reluctant to try is task 29 and reload the WINMO ROM.
ANYONE ELSE OUT THERE EXPERIENCING THIS AND IF SO, HOW DID YOU FIX IT?
Click to expand...
Click to collapse
What Rom radio you using?
Are you using an auto boot or multiboot
Are you renaming the folder to Android and putting that folder on root? And dies your startup file read rel_path=android
If all correct
Seems like task29
And new Rom radio is the answer
Sent from my HTC HD2 using Tapatalk
whynot66 said:
What Rom radio you using?
Are you using an auto boot or multiboot
Are you renaming the folder to Android and putting that folder on root? And dies your startup file read rel_path=android
If all correct
Seems like task29
And new Rom radio is the answer
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
Radio_2_12_50_02_2
AND ROM IS ENERGY 24631 04 SEP 2010
HSPL3
ALSO AN UPDATE; REFLASHED 24631 UPDATED DATE,TIME,QUICK GPS, AND THEN GET THIS; IT BOOTED DESIRE HD ROM SUPER QUICK BUT OTHER BUILD IM USING Core_Droid_V.0.2 STILL DIDNT WORK. IM GONNA TRY DROPPING ANOTHER ROOTFS.IMG ON THE CARD AND TRY AGAIN.
I had a similar problem, the problem was that I had unzipped the contents of the "android" folder to the root of my SDcard. What I should have done was copy the folder to the root of the SDcard, after I did this it worked perfectly
I have the same problem here, but not only with the DARKSTONE DESIRE HD BETA 2 ROM. A lot Android ROMs boots great the first time, but after a phone reboot I was unable to boot the Android ROM again.
It shows me these message: "cant find rootfs. you need to unzip a rootfs file to your memory card. job control turned off" or the boot loader freezed completely with some stripes on the screen. any ideas?
RAIDO: 2.08.50.05
ROM: Artemis 30.0 GER (5.2.23576)
Update:
Got a solution from this thread: http://forum.xda-developers.com/showthread.php?t=788764
Just extract your DARKSTONE DESIRE HD BETA 2 ROM into "/Storage Card/Android" and boot it. done!
All you have to do is delete the android folder everytime you boot up android. I was running into the same thing after the initial setup worked good but wouldn't boot back after I went back to windows.
Sent from my HD2 running Darkstone Froyo V2.1
OK, here is my problem.
UK HD2 -> Generic running 1.66 stock, with HSPL 2.08, and Radio 2.12.50.02.
I have been running many of the different Android builds on my phone since the first one came out with no problems, until now...
My phone will not run any of the new ones at all. They give the instruction to leave on first boot to create the data store, takes about 5-10min. I have left my phone for hours with a faded black screen, with a few lines on it, but it never gets any further than that.
Have tried:
Mattc Leo + Froyo 1.5*, 1.6*, 1.7 and 1.8
Mattc Evo 1.0.1
Mattc NexusLeo 1.1
Mdeejay Froyo Sense 2.2
Mdeejay eVo 1.0
FroyoStone Sense 1* and 2
Darksotne HD2Froyo 2.1*
Darkstone DesireROM 2*, 3*, 4* and 5*
*= ones that have worked
It seems to me that something has changed with all the newer ROMS that are stopping them from working for me. I have format my SD every time i try a new ROM and have even hard reset my WinMo to see if that the problem -> Nothing works!
As Marvin would say: "I just want you to know, i am feeling very depressed today"
Help please
SquithyX said:
OK, here is my problem.
UK HD2 -> Generic running 1.66 stock, with HSPL 2.08, and Radio 2.12.50.02.
I have been running many of the different Android builds on my phone since the first one came out with no problems, until now...
My phone will not run any of the new ones at all. They give the instruction to leave on first boot to create the data store, takes about 5-10min. I have left my phone for hours with a faded black screen, with a few lines on it, but it never gets any further than that.
Have tried:
Mattc Leo + Froyo 1.5*, 1.6*, 1.7 and 1.8
Mattc Evo 1.0.1
Mattc NexusLeo 1.1
Mdeejay Froyo Sense 2.2
Mdeejay eVo 1.0
FroyoStone Sense 1* and 2
Darksotne HD2Froyo 2.1*
Darkstone DesireROM 2*, 3*, 4* and 5*
*= ones that have worked
It seems to me that something has changed with all the newer ROMS that are stopping them from working for me. I have format my SD every time i try a new ROM and have even hard reset my WinMo to see if that the problem -> Nothing works!
As Marvin would say: "I just want you to know, i am feeling very depressed today"
Help please
Click to expand...
Click to collapse
show us your step by step procedure in running android, so people when they see it may know at which point you may be making an error.
also, after reading this
post, I came to the conclusion that indeed many left
over junks in winmo are messing up the process of Android running, so I took it to mean that we have to do a Task 29 every time we try a build.
make sure the android build is in a folder marked android the older roms went on the root of the sd! another thing is when haret boots see if the writing says failer to mount sd and get back to me or pm me well figure it out!!
Definitely task29 that sucker. Also consider a "meant for android" WM rom like chuckydroid. Radio 2.14 is now available if you want to try something else.
polo735 said:
Definitely task29 that sucker. Also consider a "meant for android" WM rom like chuckydroid. Radio 2.14 is now available if you want to try something else.
Click to expand...
Click to collapse
Yeah, I was going to suggest task 29 and then reinstall a different WM Rom.
I am using the 2.14 radio with great results.....
Good Luck.
try new sd card
I can understand your frustration, If the task 29 alone does not help, I would get a new sd card, I have read its best to long format card, task 29 phone, install your windows rom of choice( I like chuckys android), then install android. good luck
Steps taken so far
Ok, first off, Thank you all for your responses!!!!
Was expecting to get flamed, as i had searched the forums and could not find anything myself but expected there to be something somewhere, that somebody knew about.
With the older ROMS that are stored on the root of SD, i formatted the SD and copied the data over using SD adaptor in my MacBook Pro's SD slot -> Worked like a charm!!
With the newer ones, that have worked anyway the procedure was the same, format SD and copy Android folder over from Mac -> again worked like a champ!
But now with these new ones i have tried the old methods of format and copy using SD adaptor, tried formatting and coping the Android folder on to the phone using the USB connection on the phone, tried renaming the "Android" folder "android".
I have not updated or changed the WinMo ROM, but i have reloaded it, when i found out about this problem. I task 29 and then reflashed with the stock 1.66 and still no dice.
Step by step for last ones i have tried:
1. Power off phone and remove battery (not needed i know but hay)
2. Remove SD card and put in SD adaptor
3. Insert into Mac and format card Fat (Mac Fat = Win Fat32)
4. Unarchive Android ROM and copy to SD - (/StorageCard/Android)
5. After copy complete wait for 5min then eject SD (i like to make sure there is nothing in the buffer)
6. Put into phone, put battery in and power up (normally with the battery cover off lol)
7. Wait for the unfortunate Windows logo and phone to boot up ("Launching HTC Sense" seems to take forever)
8. As soon as phone started either run the Android icon from Sense or open File Explorer and run both programs
9. HeRET starts, screen goes black see txt (guess bootloader loading the kernel) for 1 second then screen fades to black with faint lines running down it (backlight on very dull)
10. Wait...wait...wait (Mattc Leo Froyo 1.8 waited 20min, then fell asleep and when i awoke 5hours later it was still the same)
I dont get it, so to recap i have formatted my SD every-time i have tried, i have task29 my phone about a week ago, tried many of the ROMS on here and nothing, i have tried one of the old ones and that works though!!!!
Arrrgg, Please somebody point out what stupid thing i am doing wrong.
"Even the doors don't like me!"
Could this be it?
I have spent more time reading forums and such like, could it be due to the fault described here in this post?
http://forum.xda-developers.com/showthread.php?p=8264796
If you are using a standard stock 1.66 rom your radio may not be compatable. I had the same issue to start off with. Would boot half way then die. I upgraded my radio now using 2.14 and can boot no problem at all.
SquithyX said:
Ok, first off, Thank you all for your responses!!!!
Was expecting to get flamed, as i had searched the. . . . . . or changed the WinMo ROM, but i have reloaded it, when i found out about this problem. I task 29 and then reflashed with the stock 1.66 and still no dice.
Step by step for last ones i have tried:
1. Power off phone and remove battery (not needed i know but hay)
2. Remove SD card and put in SD adaptor
3. Insert into Mac and format card Fat (Mac Fat = Win Fat32)
4. Unarchive Android ROM and copy to SD - (/StorageCard/Android)
5. After copy complete wait for 5min then eject SD (i like to make sure there is nothing in the buffer). . . . .
Click to expand...
Click to collapse
I have experimented with Stock UK WWE 1.66 about two weeks ago, and no matter
what Radio and HSPL I put on it, once I clicked on Haret, it goes exactly like you describe it
White faint lines all over the screen which seems like very fine drops of rain.
you can always try Winmo ROMs specifically made to be Android friendly.
also it would be valuable if you read this Thread read
at least the first and 13th post
I haven't seen a thread for this question, I don't know, it could be possibly because its a bad question. But basically, I'm new to putting Android on the HD2 so I don't completely understand 100% of what I am reading. I've installed Android about 3 times, but always deleted it and went back to WinMo cause of the calling issue.
All I would like to know is, do I have to download anything specific or run anything before or after I run the CLCRD and HaRet in the Android folder from the Froyostone v2 .rar?
In the Froyostone v2 thread I noticed this, and I am wondering if I need to download anything from the following threads in order to run this version perfectly.
Code:
Build base: http://forum.xda-developers.com/showthread.php?t=742371
--------------------------------------------------
darkstone 2.6.32.9 #3 Kernel:
- Based on GIT (latest revision: 30/08/2010)
- Overclock enabled and undervolted (by huanyu - http://forum.xda-developers.com/showthread.php?t=746997)
- Interactive governor added
- KGSL shadow writes modification
Kernel Diff patch: included in build, also available here: http://www.multiupload.com/S8XHK89HRG
Rootfs based on dan1j3l's Froyo V1 build
I have a regular TMO USA HD2 with only HSPL3 in it. Radio 2.10.50.26
Thank you
idk but i have tried five different builds and mine runs a few lines then gets to "booting android kernel" then stops as the screen slowly fades to black. I want android on this damn thing. WTH am i doing wrong??
First, I am no expert on Android. However, I was able to get the Froyostone V2 working, and have been using it awhile.
You do need to format your SD card to FAT 32. You need to make sure the Android folder is on the root of your SD card (for Froyostone anyway-I think it is different for other builds). According to Darkstone, you should not have any other "Android" folders on your card.
Once all that is done, just open the folder and run CLRCAD and HARET.
As far as the robo voice, I don't have it running the Energy ROM.
EDIT: Forgot to answer your original question: I did not download anything other than the original build. I believe that is just an FYI from Darkstone you are referring to, and he says "included in build".
First of all, I know there are "many" Android Install Help! thread and I have gone thorough so many of them if those information would help my problem but unfortunately they did not help...
I'd gone thorough this post very carefully at least 10 times
http://forum.xda-developers.com/showthread.php?t=653614
and I've been suffering to install almost all Android ROM on my T-Mobile US HD2 over 4 weeks so I finally decided to post my issue for help!
My current environment:
- T-Mobile USA (TMOUS) HD2
- HSPL3
- Radio: 2.12.50.2_2
- WM ROM: Dutty's N4S v3 & Co0Kie 1.8.1
Note: WM works really well and very stable
PC environment
- Windows XP SP3 English
- Windows XP SP3 Japanese
* Both Windows are different box and used for flashing WM ROM and Radio. They both do the job without any error. BTW, Current HD2 was flashed with English XP for ROM and Radio.
- MacBook Pro: Snow Leopard: Mostly used for data transfer (movie, music, etc). I use "GS Finder" to globally search and trash "._*" files occasionally to clean the garbage made by OSX.
My current ROM flashing process are as follows:
1) Boot Loader:
Already have installed HSPL3 and have installed many Custom WM ROMs.
2) Format SD Card:
Using "Panasoic SD Format app"
http://panasonic.jp/support/global/cs/sd/download/sd_formatter20.html
Tried all combination of Format as
[Quick] [Erase ON] [Erase OFF] and Resize [ON] [OFF]
Also, I format my microSD from HD2 as well. Cluster size is shown as "32K" when format with WM SD card format app.
Any suggestion of recommended combination of formatting microSD?
I have two microSD cards:
a. Kingston 16GB class 4
b. 3C Pro 16GB class 6
Both benchmarked and confirmed that they're not "fake" class 4 nor class 6.
3) Run "Task29":
To clean the garbage off from HD2.
http://forum.xda-developers.com/showthread.php?t=644781
4) Flash WM ROM:
Currently, I'm using Dutty's N4S v3 as WM ROM. I also have tried many Android ROM + Recommended WM ROM + Radio, such as "ShubCraft STOCK 1.5+ChuchyDroid+Radio 2.10.50.26", or "mccm 1.5 + OzDroid 1.11 + Radio 2.14.50.04", "HD2Froyo V2.1 + Energy Leo COM2 Barebones WM Build For Android + Radio 2.14.50.04"
and many more recommended combos. Unfortunately, none of the combo really helped.
5) Hard Reset:
As many threads suggested, I also made sure to hard reset after WM ROM Flash.
6) Settings from WM:
Make sure to turn "Off" for "Automatically adjust backlight" from WM. Also, set volume as "one volume" (not separate ringer and master). Check off all "Screen Dim, Sleep" check boxes.
7) Start Android:
Copy "Android" folder to the "Root" of microSD card. Run "CLRCAD.exe" then "haret.exe" to boot Android ROM.
Since the log flows goes soooo fast that makes difficult to read the messages but at least there are consistency in any Android ROM that complains "No such a file or folder. Cannot create xxx" type of error during install.
When/How trouble started:
For my 1st week of using HD2 with Dutty's Creme de la Creme v3 and v5, ShubCraft and few other ROM were working OK (I believe I was also trying mattc 1.7 Froyo w/Sense).
One day, I tried "HyperDroid v1.1" then Android did not load anymore. Since then, some Android ROM just "Vanishes" when tried to load and freeze (like mattc Froyo w/sense 1.8). Many of ROMs just freezes at "HTC" logo (I wait at least 60 min to give enough time to let ROM start, but they're simply freezes… I bet 60 min is enough to boot, isn't it?).
Only Android ROM which "berely" work is "mattc Froyo w/sense 1.7" but still freezes at least 10 times a day. Mostly, Sleep of Death but many occasion activate/deactivate WiFi triggers freeze, too.
… I have been trying resolve my issue over 4 weeks now, and spending too much time and effort on this and I'm eager to resolve it!! I believe I tried almost every tips suggested on forum but I'm also certain that I must have missed something. Please suggest anything if you think I'd missed something I mention above.
PLEASE HELP!!
(or should I wait some super-chef will release NAND flash version Android?)
taka_mass said:
First of all, I know there are "many" Android Install Help! thread and I have gone thorough so many of them if those information would help my problem but unfortunately they did not help...
I'd gone thorough this post very carefully at least 10 times
http://forum.xda-developers.com/showthread.php?t=653614
and I've been suffering to install almost all Android ROM on my T-Mobile US HD2 over 4 weeks so I finally decided to post my issue for help!
My current environment:
- T-Mobile USA (TMOUS) HD2
- HSPL3
- Radio: 2.12.50.2_2
- WM ROM: Dutty's N4S v3 & Co0Kie 1.8.1
Note: WM works really well and very stable
PC environment
- Windows XP SP3 English
- Windows XP SP3 Japanese
* Both Windows are different box and used for flashing WM ROM and Radio. They both do the job without any error. BTW, Current HD2 was flashed with English XP for ROM and Radio.
- MacBook Pro: Snow Leopard: Mostly used for data transfer (movie, music, etc). I use "GS Finder" to globally search and trash "._*" files occasionally to clean the garbage made by OSX.
My current ROM flashing process are as follows:
1) Boot Loader:
Already have installed HSPL3 and have installed many Custom WM ROMs.
2) Format SD Card:
Using "Panasoic SD Format app"
http://panasonic.jp/support/global/cs/sd/download/sd_formatter20.html
Tried all combination of Format as
[Quick] [Erase ON] [Erase OFF] and Resize [ON] [OFF]
Also, I format my microSD from HD2 as well. Cluster size is shown as "32K" when format with WM SD card format app.
Any suggestion of recommended combination of formatting microSD?
I have two microSD cards:
a. Kingston 16GB class 4
b. 3C Pro 16GB class 6
Both benchmarked and confirmed that they're not "fake" class 4 nor class 6.
3) Run "Task29":
To clean the garbage off from HD2.
http://forum.xda-developers.com/showthread.php?t=644781
4) Flash WM ROM:
Currently, I'm using Dutty's N4S v3 as WM ROM. I also have tried many Android ROM + Recommended WM ROM + Radio, such as "ShubCraft STOCK 1.5+ChuchyDroid+Radio 2.10.50.26", or "mccm 1.5 + OzDroid 1.11 + Radio 2.14.50.04", "HD2Froyo V2.1 + Energy Leo COM2 Barebones WM Build For Android + Radio 2.14.50.04"
and many more recommended combos. Unfortunately, none of the combo really helped.
5) Hard Reset:
As many threads suggested, I also made sure to hard reset after WM ROM Flash.
6) Settings from WM:
Make sure to turn "Off" for "Automatically adjust backlight" from WM. Also, set volume as "one volume" (not separate ringer and master). Check off all "Screen Dim, Sleep" check boxes.
7) Start Android:
Copy "Android" folder to the "Root" of microSD card. Run "CLRCAD.exe" then "haret.exe" to boot Android ROM.
Since the log flows goes soooo fast that makes difficult to read the messages but at least there are consistency in any Android ROM that complains "No such a file or folder. Cannot create xxx" type of error during install.
When/How trouble started:
For my 1st week of using HD2 with Dutty's Creme de la Creme v3 and v5, ShubCraft and few other ROM were working OK (I believe I was also trying mattc 1.7 Froyo w/Sense).
One day, I tried "HyperDroid v1.1" then Android did not load anymore. Since then, some Android ROM just "Vanishes" when tried to load and freeze (like mattc Froyo w/sense 1.8). Many of ROMs just freezes at "HTC" logo (I wait at least 60 min to give enough time to let ROM start, but they're simply freezes… I bet 60 min is enough to boot, isn't it?).
Only Android ROM which "berely" work is "mattc Froyo w/sense 1.7" but still freezes at least 10 times a day. Mostly, Sleep of Death but many occasion activate/deactivate WiFi triggers freeze, too.
… I have been trying resolve my issue over 4 weeks now, and spending too much time and effort on this and I'm eager to resolve it!! I believe I tried almost every tips suggested on forum but I'm also certain that I must have missed something. Please suggest anything if you think I'd missed something I mention above.
PLEASE HELP!!
(or should I wait some super-chef will release NAND flash version Android?)
Click to expand...
Click to collapse
Tr ythis: http://leoandroid.com/viewtopic.php?f=212&t=168
maybe its the SD card; i tried one i had before to keep from possibly frying my 16gb and couldn't get anything to really work though it was only 2gb.
On my pc I backed up the orignal tmo usa 16gb class 2 card via a usb reader, formated it; copied android over i'm using "[BUILD][17.10.2010][FroyoStone Sense - V3.2][Kernel: linux_on_wince_htc 2.6.32.15]" I then all my other stuff; put the sd card back in my phone, installed Android Launcher 4.0 on winmo and i've been good since!
This is on a tmo usa hd2 w/ the latest radio and an Energy windows rom (obviously hardspl'd)
the install was quite easy for me... thats why I think its maybe your SD card. AFter digging around a bit it seems the sd card is the main factor in a happy hd2 android experience so far my original 16gb is kicking ass
I'm inclined to blame the SD card as well. The other issue it sounds like is your phone is messed up. Sorry I know I'm not much help. Good luck with everything.
Edit: try one of the later radios. I switched to 2.14.50 and haven't had hardly any problems since.
Thanks AMCJUNGLE! I'll go through your suggested link. "HTC Sync" and "Boot Android when boot Win ROM for first time" are new info to me (Step 9 and 10). I'll also try to run with suggested WM ROM and Android ROM as well and see if it does the trick!
Thanks computerjlt!
Yeah, I also accuse SD card is the core of this cause but I also formatted SD soooooo many times. Using "Windows Explorer", "Panasonic SD Format app", "Win XP Manage Computer > Disk Management", etc. Also, Disk Management will allow me to select the "cluster size" so I set it to 32K and 64K as well, but no luck.
I'll try your suggested WM/Android ROM Combo if AMCJUNGLE's link would not do the trick.
Thanks dung8604! I'm really hoping my phone is not messed up (T-T)
Yep, I tried 2.14.50 and 2.15.50 (the latest Radio) as well with Dutty's WM ROM but it did not fix the problem.
My plan is to stick with recommended WM ROM + Radio + Android ROM first, then if it would fix my situation, I'll upgrade my Radio with the latest for better signal and less battery drain. I'm really hoping to do this sometime soooooooon!!
Bad Disk Sector = Broken microSD?
OK, I tried this method with very detailed instruction suggested by AMCJUNGLE
http://leoandroid.com/viewtopic.php?f=212&t=168
Still no luck
As many other mentioned, it could be microSD causing this problem.
From my Mac, I used DiskUtility and FastAid returns no error. However, I tried "fsck" from terminal, I got this:
THE FOLLOWING DISK SECTORS COULD NOT BE READ: 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
ioctl (GCINFO): Inappropriate ioctl for device
fsck: /Volumes/SDCARD: can't read disk label
Does this mean my microSD is damaged? If so, is there way to fix it?
Hmm. Chkdsk from XP still returns "No Error"... Mystery continues
taka_mass said:
OK, I tried this method with very detailed instruction suggested by AMCJUNGLE
http://leoandroid.com/viewtopic.php?f=212&t=168
Still no luck
As many other mentioned, it could be microSD causing this problem.
From my Mac, I used DiskUtility and FastAid returns no error. However, I tried "fsck" from terminal, I got this:
THE FOLLOWING DISK SECTORS COULD NOT BE READ: 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
ioctl (GCINFO): Inappropriate ioctl for device
fsck: /Volumes/SDCARD: can't read disk label
Does this mean my microSD is damaged? If so, is there way to fix it?
Click to expand...
Click to collapse
If your card is damaged you cannot fix it. You need to replace it.
AMCJUNGLE,
It sounds like have a bad news. What I did was checking microSD using
From XP: Chkdsk e:\ >>>> OK. No problem found.
From XP: Run Disk Analyze tool called "FromHDDtoSSD" to run "full analyze".
>>> OK. No bad sector is found and reported 100% clean disk.
From OSX 10.6: Disk Utility to Check/Repair Disk and got this and not problem.
Verify and Repair volume “NO NAME”
** /dev/disk2s1
** Phase 1 - Preparing FAT
** Phase 2 - Checking Directories
** Phase 3 - Checking for Orphan Clusters
55 files, 15645504 KiB free (488922 clusters)
Volume repair complete.Updating boot support partitions for the volume as required.
However, if I test fsck from OSX Terminal against mounted microSD by
fsck /dev/rdisk2s1
result returns as
BAD SUPER BLOCK: MAGIC NUMBER WRONG
By some research, "BAD SUPER BLOCK: MAGIC NUMBER WRONG" is caused by area of Administrative File Management info is damaged or broken. In short, my microSD is screwed up...
Fixed... somehow
OK, still using same WM ROM (Dutty NS4 v3), same Radio (2.10.50.2_2), but suddenly, "HD2Froyo V3" WORKED!!
No Sleep of Death, no freeze, OS behaves very fast and stable. In addition, Skype 3G Mod works 100% (it didn't with mattc 1.7).
I still have no clue what went well because so many other new roms (such as ShubCraft 2.0, mdeejay eVo Sense v. 2.3, etc).
Anyway, I'm super happy now and I will definitely keep the current environment until Android allow NAND install. Yey!
hi guys
i have a little problem with my htc hd2
i flashed my radio to a 2.14.50.04
i put a rom on it
and hsspl 4
now when i want to start android it gets tuck at jumping to kernel and goes to a white screen with green letters
can someone explane what i can doe now beaucausei'm stuck
greets matthias
I'm guessing you're talking about SD card android roms.
If so, is the android folder at the root of your sd card? Are all the the contents of the folder in there?
zimage, intrid, system image, blank data image (if the build requires you to have one, some builds make their own data.img) , all of those are in there? And you tried CLRCAD then haret right?
Also how long did you wait on the HTC screen? 20 mins? You should have if you didn't.
If you didn't wait 20 mins, and the build you are using is one that makes its own data.img, delete it. Retry running android.
If you know not of anything in what i've stated go search and read.
hi
jep all the files are in there and the phone starts again after the htc screen
when can i seee if it maks his own data ?
In the android folder. o.o
If you didn't have to put in a blank data image into the android folder or it didn't come with one, then it is an android build that makes its own.
You can also see in the startup.txt to see if it makes one.
If you see something like this data_size=512, in the startup.txt , it is making its own data image, of size 512 mb. To change the size simply change data_size= something else
eg data_size=1024, creates a 1gb data image.
i don't get it
there is a data file of 512mb
butt is that file the problem?
can someone please help beausause i'm getting crazy
If there is, then simply try reboot android. o.o I already said this in my first post...
At max it should take 20 mins for first boot. If it still doesn't boot, then maybe that build doesn't work (you should read the last pages of every build you want to try to see what works and what doesn't), try a different build.
hi
i ddid but after 30 sec the phone starts again in windows
i tried 3different builds
cyanogenmod 7 v2.6 (gingerbread) on HTC HD2
After installation MDJ’s CyanogenMod 7 v2.6 (gingerbread 2.3) I
experience the following problems on my HTC HD2 (dutch HD2 with latest
Radio):
After ending a call or pushing the end-call button, the HD2 buttons
stay on and the screen stays black and doesn’t respond at all.
I have to remove the battery to reset my HD2.
sorry for my english, i hope you understand my issue here.
By the way I’ve installed MAGLDR v1.3, and CWM 1.3 and HSPL->SPL2.08
on the device.
Everything works perfect except the above
Please HELP!!
Try a different winmo rom? You can try task 29, then flash the winmo rom. Also insignificant in my opinion, but may play a cause in your problem, which HSPL did you install? I know you installed HSPL 4, but be specific, which one from the menu it offered? Eg. I have HSPL 2.08 which is the most popular for running android.
@aem
I'm sorry but I've never experienced your problem before, nor have I tried MDJ's Cyanogen build extensively before. Well as they say if this doesn't work properrly, try something else. Meaning, try a different build and see how it plays out. Use titianium to backup anything you'd like.
i now am runnin the newest hspl i think it is 3.33..
the rom was miri_steve0007
now i am downloading energy leo rom
and a different radio
else can't you just tell me from the beginning what i have to do for playing android?
May have no effect what so ever, but install HSPL 2.08, maybe it might fix your problems. Your case is weird one to me. @[email protected]
For sd android. Theoretically and for some, there are no requirements for android except for a radio later than 2.08, Build and HSPL shouldn't matter, but it did for some.
The android folder should be at the root of your sd card meaning /android, and one should simply run CLRCAD then HARET and done, android should boot up.
If you're looking to run android off NAND (your phones internal memory, removing winmo completely) You need a radio later than 2.08, HSPL 2.08 and MAGLDR installed.
got a new prob
the htc wont load any image anymore its allways stuck at 0%
does somebody knows what i should do?
Ouch, all flashing just stops? Is the phone in bootloader mode? The tri color screen I mean.
I'm sorry but this is where my knowledge stops, sorry, i can't think of anything else to help you with right now. Worst case scenario, your device might acutally be having hardware problems and needs to be repaired.