Database Users

Bricked Phone - Did android NAND kill it?

My phone has been running an Android NAND for a couple of months, and the other day it just froze and then on rebooting i get a plain white screen.
I can get to the bootloader and so far nothing flashes to it
HSPL - Critical Error
SD-CARD flash - red numbers or just continual loading
USB flash - sits at 0% then gets error
so what killed my phone?
and is there ANY way i can get it working again, if not...i will throw it in the bin or perhaps smash it up with a hammer and post a youtube video here...im that annoyed! I wouldnt mind if i continually flashed roms, but i didnt...flashed on Android NAND and now its dead.

Find yourself a standard Winmobile rom and radio for the HD2 (if yours is a TMOUS device make sure you choose the correct radio and rom type for this device) and flash them to your device. With a bit of luck your device should then boot up.
If you then wish to go down the Android route again then read and follow all the instructions on here to do so. Don't forget to make sure your battery is fully charged before you attempt the reflash.
Good luck, hope it goes well.
WB

hi,
the battery is fully charged, but this is the problem i have..i cannot flash anything to it via sdcard or usb both give errors.

htcjrs said:
hi,
the battery is fully charged, but this is the problem i have..i cannot flash anything to it via sdcard or usb both give errors.
Click to expand...
Click to collapse
Do you still have the Andriod ROM on your HD2? If so boot into MAGLDR by turning the HD2 off and then pressing andbolding down the power button. Then use the volume up and down keys to scoll through the menu and find recovery and press the send button to select.
If you nolonger have the Andriod ROM then I suggest running a Task 29 on your HD2 then try to flash the official ROM to your HD2. If you are still having trouble getting it to flash do not get discuraged just keep tring to get it to flash, heck trythe USB method for awhile then try the SD card method for awhile. For some unknown reason to me a lot of people here on XDA have been having trouble getting their HD2 to flash a ROM. But all of them just kept trying and eventually got it to flash a ROM. Best of luck.

tried and tried and tried again, anyone wants this brick for free, i will post.

htcjrs said:
tried and tried and tried again, anyone wants this brick for free, i will post.
Click to expand...
Click to collapse
Did you run a Task 29 on your HD2 as I mentioned in my previous post? I beleive this will help you out. Also if you still have MAGLDR on your HD2 you can try to reflash the Andriod ROM. If you no longer have MAGLDR on your HD2 then you can reflash HSPL 2.08 and reflash MAGLDR by usinig the bootloader and the try flashing the Adriod ROM. Just make sure the white bar of the bootloader screen says USB and not Serial before you try to flash anything.

T-Mac, I have this problem. It's not something as simple as with MAGLDR or CWM. You can't even get a bootscreen let alone flash anything from HSPL (everything sticks at %0) lol.
Dude, your best bet is to try go flash a custom WinMo ROM. I used one of Artemis' ROM's. It had a .nbh file so I renamed it to LEOIMG.nbh and put on my SD card (512-4GB max) and then boot to HSPL and it'll allow you to flash the ROM.
It'll flash correctly but once it reboots it'll go back to the white screen. After that, it'll be able to charge when off so let it charge overnight while off, then in the morning try unplug the USB from the phone then pull battery and put it back in then try boot. It worked like 3 times for me so you might aswell try it.
I personally think it's a problem with MAGLDR and maybe it becomes corrupt or something.

hi
im gonna try this now, but i have a small problem...it did flash HSPL and now it is on 2.08.000 and it wont flash back
its one nightmare after another.

made a little progress, when trying to flash stock rom from sd it just sits on loading.... no error but doesnt do anything else.

Try this turn your HD2 off and remove the battery for a couple of minutes and then put the battery back in. I do not know if the HD2 has a reset like this or not. But a lot of electronicsreset certain things when all power is disconnected. This may not help but what can it hurt. Best of luck.

htcjrs said:
tried and tried and tried again, anyone wants this brick for free, i will post.
Click to expand...
Click to collapse
I'll take it. In this day of T-Mo being sold off, I need a challenge to distract me and keep me happy

HTC Does nothing after aMAGLDR V1.13 screen

Windows Phone 7 + MAGLDR V1.13
I boot up. HTC screen. Then MAGLDR V1.13 screen. Then another HTC screen (Windows Phone 7 HTC screen). It blocks there for quite some time. Then restarts. It's all it ever does. I can access MAGLDR V1.13 menu, no problem there. It was working fine yesterday =\
What can i do? Help :S

Reinstall the ROM and tell me what happens
Sent from my HTC HD2 using XDA Premium App

What Radio have you got on your phone?
I would re-install your ROM as walidhazem suggested, but make sure that you do a task 29 first, then flash either radio 2.12.50 or 2.15.50 as these seem to be the 2 best radios for WP7.
What SD card have you got as your issue could be related to that. Do you have another SD card you could try? You could also try using SDFormatter to re-format your SD card and then try.
Let us know how you get on.

Thank you for both replies!
If the phone is connected to a power source while in the magldr screen, it charges right?
Just making sure phone could be at 50% more power or not. It's been charging all night.

as far as i remember it doesn't charge.. but even if it's less than 50% i usually do the flash.. just b sure it's not very low..

exhit said:
Thank you for both replies!
If the phone is connected to a power source while in the magldr screen, it charges right?
Just making sure phone could be at 50% more power or not. It's been charging all night.
Click to expand...
Click to collapse
If you still have the magldr screen then boot in the rom. The reason it getting stuck is that the phone is too hot. Remove the battery for 1/2 hour then try again.
Do wait as the HTC screen is showing for a while until it loads the rom.
FPM

sudeep, how can i be sure it's not very low since i can't go the Home Screen.
FlowerPotmen, it's been charging all night, but i tried before that. It wasn't hot then. Also, i don't restart when it stops at the HTC screen. It restarts itself =\
Should i flash another rom? I'm afraid it can brick. If i'm to flash, I'll flash the WM6.5 Official.

exhit said:
sudeep, how can i be sure it's not very low since i can't go the Home Screen.
FlowerPotmen, it's been charging all night, but i tried before that. It wasn't hot then. Also, i don't restart when it stops at the HTC screen. It restarts itself =\
Should i flash another rom? I'm afraid it can brick. If i'm to flash, I'll flash the WM6.5 Official.
Click to expand...
Click to collapse
No need to flash wm6 just use task 29, then flash-in maglder 113 again, then flash your favourite rom again. But make sure to re-format you micro sd card first.
FPM

I can't instal Windows Mobile Center since "i don't have" a Windows Mobile device. I need the Active Sync feature needed for the RUU files. Without that i can't sync Task 29 or any new rom. What can i do?

Go to bootloader and install Roms like you used to do when using ActiveSync.
(Bootloader: Power off phone > Hold volume down button and boot > when you see a tri-colour screen connect the USB and wait until "Serial" to "USB" )
^^
That was the answer to your previous post. But to answer your original question :
Restarting in WP7 is a common, incompatible sd card, issue, try to use another sd-card and reinstall WP7 again.

Guys, i managed to Flash the official rom again. I'm gonna stick with Android SD for now.
Thanks for all the help and tips. I really appreciate the help.

exhit said:
Guys, i managed to Flash the official rom again. I'm gonna stick with Android SD for now.
Thanks for all the help and tips. I really appreciate the help.
Click to expand...
Click to collapse
how did you manage to flash it!!!

HELP!! HD2 stuck on "Stick Together" Screen..No Bootloader!!

I recently tried to load Magldr 1.13 and it finished loading but when the phone restarted it got stuck on the "Stick Together" screen. I tried to restart while holding the Volume Down and and Power button and also the Volume Down and Volume Up buttons but the bootloader doesn't load at all..Is there anyway to fix this?

You only need to hold down the volume down button in order to enter bootloader. Also please be sure your volume down button is working.

I tried to hold the volume down button..i'm sure my volume down button is working..but how do you know for sure?

Well from what I am reading you are unable to get to the magldr screen so it is difficult to tell if the volume down button is in fact working. Also before installing magldr did you perform a task29?

Nemesis1278 said:
Well from what I am reading you are unable to get to the magldr screen so it is difficult to tell if the volume down button is in fact working. Also before installing magldr did you perform a task29?
Click to expand...
Click to collapse
No I didnt perform a task29..before this rom I was running Android on it..then i did a hard reset which restored it back to Windows 6.5..Then I tried to run the magldr and the screen just got stuck after I ran the 1.13...I remember the screen asking me if I wanted to move from a version 3.14 to a 2.0 or something like that..Did that have anything to do with it?

Well after installing windows and before going back to magldr you needed to perform a task 29 to delete windows from the phone. Windows may still be on the phone and you may be able to force it into boot loader if it is able to connect to activesync. It has been a while since I have done it that way so I don't recall how.
Sent from my HTC Sensation 4G using XDA App

Nemesis1278 said:
Well after installing windows and before going back to magldr you needed to perform a task 29 to delete windows from the phone. Windows may still be on the phone and you may be able to force it into boot loader if it is able to connect to activesync. It has been a while since I have done it that way so I don't recall how.
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
It can still go to activesync if the phone doesnt get past "Stick Together" ???

I doubt that it will but it doesn't hurt to try. And if activesync does connect then you should be able to reinstall windows rom if i remember right.
peterjayrolle said:
It can still go to activesync if the phone doesnt get past "Stick Together" ???
Click to expand...
Click to collapse

Nemesis1278 said:
I doubt that it will but it doesn't hurt to try. And if activesync does connect then you should be able to reinstall windows rom if i remember right.
Click to expand...
Click to collapse
what do i do if it doesn't connect?

Then I am lost because I do not see any other way to get into the bootloader, but I will try to search.
---------- Post added at 12:10 PM ---------- Previous post was at 11:49 AM ----------
I am not sure if you are having the same issue but it seems similar check out post number 10. So it may be the ribbon keypad cable that needs to be replaced for you.
http://forum.xda-developers.com/showthread.php?t=1324276

OK I'll try this and let you know if it works

start from the beginning !!
flash original rom, flash hspl, flash radio 2.15.50.14
do task 29,
flash magldr, flash recovery, flash rom !!
!!

aaki_rocker said:
start from the beginning !!
flash original rom, flash hspl, flash radio 2.15.50.14
do task 29,
flash magldr, flash recovery, flash rom !!
!!
Click to expand...
Click to collapse
I can't flash if I can't get past the "Stick Together" screen

eeeeek! i hope you didn't brick ur phone. Did you try the little yellow reset button next to the sd slot? tooth pick will work.

peterjayrolle said:
I can't flash if I can't get past the "Stick Together" screen
Click to expand...
Click to collapse
which stick together screen ??
:O !!

aaki_rocker said:
which stick together screen ??
:O !!
Click to expand...
Click to collapse
the T-Mobile splash logo

mr.shenanigans said:
eeeeek! i hope you didn't brick ur phone. Did you try the little yellow reset button next to the sd slot? tooth pick will work.
Click to expand...
Click to collapse
yes I did..it just went to the "Stick Together" screen and stayed there

peterjayrolle said:
yes I did..it just went to the "Stick Together" screen and stayed there
Click to expand...
Click to collapse
You loaded a custom wm ROM and it didn't change the splash screen? Do you have HSPL 2.08?
Sent from my Dell Streak 7 using xda premium

Where exactly can I find this task 29?

peterjayrolle said:
yes I did..it just went to the "Stick Together" screen and stayed there
Click to expand...
Click to collapse
i think you have probably flashed the wrong radio !!! :O !!
just try flashing a stable compatible radio !!
here is the link for radios : http://forum.xda-developers.com/showthread.php?t=611787
you can flash the radios using nbh installer,
or hd2 toolkit
or put the radio on the memory card, rename it to LEOIMG.nbh and go to the bootloader screen and flash it from there !!
!!
good luck ....

Stuck on cLK screen.

Well, so here's my first post and this issue has been frustrating me because usually I find my answers online but anyways here's the problem. (Edit: Ok I realized I posted once before, so I guess 2nd my bad aha)
So, my HD2 had TyphooN CyanogenMod 7.2 RC2 v3.8.3 ROM on it cLK. One day my phone was always stuck on the T-mobile Stay together screen, I rebooted it over a good 20 times and still was always stuck. So I decided to just Task 29 it using the HD2 Toolkit (thanks ksubedi) (well I didn't know if that was a good idea or not because I'm not root smart aha, but I did it anyways) What I know when you Task 29 it, it wipes out everything, so I started the whole process again but with the HD2 Tookit. Everything was fine, running smoothing installing everything again, up until when I have to install ClockWorkMod on it. When I want to flash CWM its just always on the "waiting for device" on the command prompt and here iss the picture of my phone (provided)
Then I looked into more and I wasn't able to install the android_winusb.inf file because I have Windows 7 or something and I always get a failed error when trying to install it. (sorry yes I'm clueless aha) So I looked into it more and found the Android SDK thing and downloaded the Google USB driver. Still no luck when trying to install CWM.
But here is my downfall. I was so frustrated I was trying everything, so in the HD2 Toolkit I decided to install HSPL 2.08. My phone already had HSPL if I'm not mistaken if you already have the 3 color things when you press volume down and end call, (but again I'm clueless) So after that I Task 29, but here's the catch it will not do it. Before installing HSPL I could task 29 and it would take 15 seconds to go 100% but now its always 0, and gives me an error.
So that's my problem (probably more cause I screwed it up myself). But any help with be really appreciated!

Did you try manually installing the USB driver from the device manager?
As for the spl, are you sure you installed the 2.08.Hspl version (what does it exactly say on the RGB bootloader?)
Sent from my HD2 using xda premium

Τry to install clk v1.5.It has built in recovery and on the fly re-partition.So you`ll not need pc and usb drivers.

Will try when I come back after school. Finally some replies! I remember downloading HSPL 2.08.0000 or something. Does it exactly have to be 2.08?

vctkiller said:
Will try when I come back after school. Finally some replies! I remember downloading HSPL 2.08.0000 or something. Does it exactly have to be 2.08?
Click to expand...
Click to collapse
It must be 2.08.HSPL or 3.03.HSPL. the one ending in 0000 will block you from flashing unofficial images other than HSPL. So you can just flash back the hspl version again.

clio94 said:
Τry to install clk v1.5.It has built in recovery and on the fly re-partition.So you`ll not need pc and usb drivers.
Click to expand...
Click to collapse
Hey I tried this method, and also the one previously provided but still no luck. With the person saying get HSPL 2.08 I did it, got to the end where clk 1.4 or something (not clk 1.5) but the command line ends at porcharge. Theres no fastboot commands like in other pictures I look like and when I do cLK Install Recovery on the NAND Toolkit, the command prompt keeps waiting on the device.
So now I tried the cLK 1.5 method. I followed kylew1212's guide using the first way with the NAND Toolkit, Task 29, then did the INstall RUU. Everything went smoothly but I'm back to my first problem. It's stuck at the T-mobile stick together screen :/

If you press back button when phone restarts,doesnt get you in clk ? Or if you hold home when phone restarts,doesnt get you in recovery ?

clio94 said:
If you press back button when phone restarts,doesnt get you in clk ? Or if you hold home when phone restarts,doesnt get you in recovery ?
Click to expand...
Click to collapse
Sorry if I'm dumb lol. But the only way to turn on the phone is holding the red end key right, thats the only that it turns on for me. And its stuck at the stick together T-mobile logo. It doesn't go into recovery or anything. How would I be able to restart my phone with being on the T-mobile stick together screen without taking out the batteries and such??

Finally some success I'm on this screen now! Now to find a guide on how to work with cLK 1.5 aha.
Hmm. While restarting and pressing the back arrow and end key, I'm able to get into cLK. No like with home and end key though. And when I do click on Recovery it's trying to boot into Linux or something and no progress shows. "cmdline: no_console_suspend=1 wire.search_count=5 clk=1.5.0.0" Do I just have to wait longer or something. Also in the information on cLK 1.5 its just blank after Radio. Do I need a Radio of some sort?

Don't worry about that just boot into recovery and flash zip.

hengsheng120 said:
Don't worry about that just boot into recovery and flash zip.
Click to expand...
Click to collapse
Damn, I'm pretty clueless. But when I click recovery and get into the next screen nothing happens. How do I flash the zip if I'm unable to access the HD2 sd card with putting in the zip file.

Try to repartition the recovery sector to 10 mb in settings

hengsheng120 said:
Try to repartition the recovery sector to 10 mb in settings
Click to expand...
Click to collapse
Hmm. I tried with the original 5mb recovery sector and 10mb recovery sector still no success. I'm stuck with this screen when I click on recovery. I'm also curious if I should have a RADIO or something, because of the cLK 1.5 homescreen where it gives information its blank (pictures provided)

Are you able to sucessfully install magldr + recovery then?

hengsheng120 said:
Are you able to sucessfully install magldr + recovery then?
Click to expand...
Click to collapse
I've never installed magldr before, but I'll get back to you about it.

Well..problems with MAGLDR aswell. Everything goes smoothly until the USB Flashing and the AD Recovery. When doing USB Flashing the process is fine but when it goes "Reset now..." It never resets, but I'm guessing it flashed already. So when I go to AD Recovery it goes "1EFATAL HIT 1", I've looked up the problems for this, and so I've task 29 it again, installed 2.15.50.14 radio. Tried different cache size and partition size, but always no luck what so ever. So lost in this :/

vctkiller said:
Well..problems with MAGLDR aswell. Everything goes smoothly until the USB Flashing and the AD Recovery. When doing USB Flashing the process is fine but when it goes "Reset now..." It never resets, but I'm guessing it flashed already. So when I go to AD Recovery it goes "1EFATAL HIT 1", I've looked up the problems for this, and so I've task 29 it again, installed 2.15.50.14 radio. Tried different cache size and partition size, but always no luck what so ever. So lost in this :/
Click to expand...
Click to collapse
Try the fatality fix here: http://forum.xda-developers.com/showthread.php?t=1633243

I really appreciate that your helping me, but I'm almost there! Now encountered to another problem. Now when I do USB Flashing it finally resets itself. But when I click the AD Recovery its stuck at "GO GO GO!" I'm using the NAND Toolkit, and I tried two different partition and cache size 200/8 and 250/8. I have no idea how much I should bump these up too, and the ROM I'm trying to install is the NexusHD2, if that helps.
EDIT: FINALLY INTO CWM!!!! Hmm. I was looking around and there was this guy said to move the 3 pin connecters in the battery or something. So I was like what the heck and just did it, and now im in CWM. Thanks man. I really appreciate for you to always reply back when I needed help. Wouldn't have gotten through without you!

vctkiller said:
EDIT: FINALLY INTO CWM!!!! Hmm. I was looking around and there was this guy said to move the 3 pin connecters in the battery or something. So I was like what the heck and just did it, and now im in CWM. Thanks man. I really appreciate for you to always reply back when I needed help. Wouldn't have gotten through without you!
Click to expand...
Click to collapse
can u explain in detail how u make it working plz

faizul_emizal said:
can u explain in detail how u make it working plz
Click to expand...
Click to collapse
What problem are you having? I'm not expert like hengsheng120 but I was able to find a solution to a problem that I thought never was going to be fixed.

[q] htc hd2 - htc logo stuck

HI,
I tried to install Android on this phone. I fallowed step-by-step tutorial, installed HSPL 2.08, installed Radio_Leo_2.15.50.14 ROM,installed MAGLDR 1.13 and after that I should get MAGLDR menu, but phone restarted and only shows white screen with green HTC logo. I tried to turn off phone and hold power button to enter MAGLDR, but nothing. A tried with Wipe and then repeat all steps above but still the same. Before on the phone was Windows mobile, but also not working. Can someone guide me how to fix this?
Thanks

You have to wipe the phone with Task29 from bootloader and at 99% of the process hold volume down, boot in bootloader again (4 colors) and then install MAGLDR v1.13. After that the only way to boot in MAGLDR is holding power button when you see Go,Go,Go and should boot into it. Repeat the steps, there is no other way and if not working you do something wrong. Remember to have full battery. Try mine, maybe you are lucky.

eclyptos said:
You have to wipe the phone with Task29 from bootloader and at 99% of the process hold volume down, boot in bootloader again (4 colors) and then install MAGLDR v1.13. After that the only way to boot in MAGLDR is holding power button when you see Go,Go,Go and should boot into it. Repeat the steps, there is no other way and if not working you do something wrong. Remember to have full battery. Try mine, maybe you are lucky.
Click to expand...
Click to collapse
I tried, everything done with "succesfully". After installation of MAGLDR it's not showing GO, GO, GO and not showing RADIO and other stuff written with red color in lower left color, just white screen with green HTC.
Can I use something else then MAGLDR?

drazenmd said:
I tried, everything done with "succesfully". After installation of MAGLDR it's not showing GO, GO, GO and not showing RADIO and other stuff written with red color in lower left color, just white screen with green HTC.
Can I use something else then MAGLDR?
Click to expand...
Click to collapse
No, something wrong there and I telling you, this is the only way. Flash again HSPL4 and Radio, different one like 2.12.50.02_2 even if have nothing to do with the problem. Do you use ToolKit? Don't use that, flash separately all the steps. Take off SD and Sim card from the phone. If you stuck in logo because you do something wrong or the phone it's faulty but I never saw that before.

eclyptos said:
No, something wrong there and I telling you, this is the only way. Flash again HSPL4 and Radio, different one like 2.12.50.02_2 even if have nothing to do with the problem. Do you use ToolKit? Don't use that, flash separately all the steps. Take off SD and Sim card from the phone. If you stuck in logo because you do something wrong or the phone it's faulty but I never saw that before.
Click to expand...
Click to collapse
Is there any problem that in three colors screen on top is written "Security unlocked"? I don't use ToolKit, although I have it. I am doing all separately.

drazenmd said:
Is there any problem that in three colors screen on top is written "Security unlocked"? I don't use ToolKit, although I have it. I am doing all separately.
Click to expand...
Click to collapse
Security Unlocked? Never heard about that and no way this happen on HD2. When you are on bootloader on top should be written the type of the Chip, Cotulla HSPL 2.08 only. Anything else is just weird. It's your HD2 branded?

eclyptos said:
Security Unlocked? Never heard about that and no way this happen on HD2. When you are on bootloader on top should be written the type of the Chip, Cotulla HSPL 2.08 only. Anything else is just weird. It's your HD2 branded?
Click to expand...
Click to collapse
Yes, it' branded. I attached my screen
I tried with different radio rom and then I installed MAGLDR again, but same thing, just white screen with htc logo

drazenmd said:
Yes, it' branded. It's same like in this picture on this topic http://forum.xda-developers.com/showthread.php?t=667798
I tried with different radio rom and then I installed MAGLDR again, but same thing, just white screen with htc logo
Click to expand...
Click to collapse
There is no difference then. On bootloader did you installed and is written CotullaHSPL? How do you installed MAGLDR? In MAGLDR you execute ROMUpdateUtiliy.exe? If you did then you should boot into it. To me the problem is you don't know ow to boot into it. Try keep pushing call button instead of power button but for me MAGLDR is not installed on your phone. I remember well when I installed MAGLDR I don't have to even push power button because it boot automatically. Did you performed Task29? Between this options you making some mistake.
BTW, I worry if your phone is not locked permanently. This kind of job doing the carriers of your phone but on HD2 to me is impossible.

eclyptos said:
There is no difference then. On bootloader did you installed and is written CotullaHSPL? How do you installed MAGLDR? In MAGLDR you execute ROMUpdateUtiliy.exe? If you did then you should boot into it. To me the problem is you don't know ow to boot into it. Try keep pushing call button instead of power button but for me MAGLDR is not installed on your phone. I remember well when I installed MAGLDR I don't have to even push power button because it boot automatically. Did you performed Task29? Between this options you making some mistake.
BTW, I worry if your phone is not locked permanently. This kind of job doing the carriers of your phone but on HD2 to me is impossible.
Click to expand...
Click to collapse
I uploaded image of my screen in above post. It's written CotullaHSPL. I started ROMUpdateUtiliy.exe, and I turned of antivirus and firewall. Every time is "successfully". I done this already on my old HTC HD2, it should boot automaticaly or should show GO, GO, GO screen. It tried with holding power, holding call button, but nothing

drazenmd said:
I uploaded image of my screen in above post. It's written CotullaHSPL. I started ROMUpdateUtiliy.exe, and I turned of antivirus and firewall. Every time is "successfully". I done this already on my old HTC HD2, it should boot automaticaly or should show GO, GO, GO screen. It tried with holding power, holding call button, but nothing
Click to expand...
Click to collapse
This is firs time I see a problem like that on HD2. Try then instal MAGLRD from Toolkit, it's a last chance, should be no difference but maybe toolkit do something magic. If I know something I will let you know.

eclyptos said:
This is firs time I see a problem like that on HD2. Try then instal MAGLRD from Toolkit, it's a last chance, should be no difference but maybe toolkit do something magic. If I know something I will let you know.
Click to expand...
Click to collapse
I tried, nothing
Do have other version of radio that you can upload or links for them? Seems that MAGLDR isn't going to start because of version of radio. I have Radio_2_12_50_02_2 and Radio_Leo_2.15.50.14

drazenmd said:
I tried, nothing
Do have other version of radio that you can upload or links for them? Seems that MAGLDR isn't going to start because of version of radio. I have Radio_2_12_50_02_2 and Radio_Leo_2.15.50.14
Click to expand...
Click to collapse
Hard to believe it won't start because of radio but you can try, here you have all of them http://forum.xda-developers.com/showthread.php?t=611787