Database Users

Flashing stops after 3% "Image corrupted"

Hi everyone.
Yesterday I tried to flash a WinMob 6.5.1 ROM.
It failed. After flashing 3%, the USB disconnected and that flashing assistant told me, that the image file is corrupt.
I used different .nbh files from www.thewingster.com.
I tried this: http://forum.xda-developers.com/showthread.php?t=561086
What I did was the following.
I installed 3 .cab files (a.k.a. HardSPL I think)
I extractet that RUUKitchen Thing and put the .nbh into the Folder and started the Program (with admin rights).
Is that all I have to do, or did I forgot to do something or did something wrong?
Thank you.

PublicITI said:
Hi everyone.
Yesterday I tried to flash a WinMob 6.5.1 ROM.
It failed. After flashing 3%, the USB disconnected and that flashing assistant told me, that the image file is corrupt.
I used different .nbh files from www.thewingster.com.
I tried this: http://forum.xda-developers.com/showthread.php?t=561086
What I did was the following.
I installed 3 .cab files (a.k.a. HardSPL I think)
I extractet that RUUKitchen Thing and put the .nbh into the Folder and started the Program (with admin rights).
Is that all I have to do, or did I forgot to do something or did something wrong?
Thank you.
Click to expand...
Click to collapse
Try flash this rom:
http://forum.xda-developers.com/showthread.php?t=437630
after this hard spl try to flash wm6.5.1. I have flashing this wm6.5.1 from sd card http://forum.xda-developers.com/showthread.php?t=559307 and work gooood.

This is NOT development related. Please post on the correct section next time.

PublicITI said:
Hi everyone.
Yesterday I tried to flash a WinMob 6.5.1 ROM.
It failed. After flashing 3%, the USB disconnected and that flashing assistant told me, that the image file is corrupt.
I used different .nbh files from www.thewingster.com.
I tried this: http://forum.xda-developers.com/showthread.php?t=561086
What I did was the following.
I installed 3 .cab files (a.k.a. HardSPL I think)
I extractet that RUUKitchen Thing and put the .nbh into the Folder and started the Program (with admin rights).
Is that all I have to do, or did I forgot to do something or did something wrong?
Thank you.
Click to expand...
Click to collapse
Well you can see if you're HardSPLed by going into the bootloader, and looking at your SPL, I believe. It should be 4.7 or something.
If you're hardSPLed, then the ROM you're flashing probably requires you to flash through the storage card, NOT through USB!! You'll find instructions on how to do that on one of Mr. Ill's ROM pages. I wrote the instructions up, they should work for you.

[Q] Loading Android on hd2 problems

Ive download a few different files for android, i set my screen setting and everytimei run clrcad then haret it rolls me through a black screen then says i have to unzip a rootfs file.
the root file is there but everytime i go through winzip to extract it it tells me theres an error, its been like this for all root zipped files..... what am i doing wrong?

Are you using builds for SD?

ummm what i did was youtubed it then went to the links they had and started downloading from there, i downloaded the lastest froyo

There are millions of youtube videos...
Ok lets start from scratch here.
Did you install HSPL 2.08 to your device?
http://forum.xda-developers.com/showthread.php?t=609477
Then did you update your radio?
Found in that same link.
How are you installing Android? Did you install MAGLDR to install and boot from NAND? Or are you saving Android to your SD and booting into windows then into Android?
We need to know what steps you did and how you are trying to boot Android to help you out. At least post a link to the video plz.

well 1. did you check if those zip files were rar? most files are for root. and makesure that you have granted superuser permissions. If you followed a youtube video start over nd just flash what ever you originally had and then try again.And remember to backup your files!

HD2-CoreDroid1.6

Hi Guys,
I'm having some problems with the correct installation of CoreDroid 1.6 after updating everything else , I stuck in the part updating files from SD Card....which simply doesn't work only thing it tells me is "No files found."
Placed them several times there, zipped, unzipped, renamend, etc....always the same error....
Could someone help me in this, pls?
cheers,
Gigi

Gigi99 said:
Hi Guys,
I'm having some problems with the correct installation of CoreDroid 1.6 after updating everything else , I stuck in the part updating files from SD Card....which simply doesn't work only thing it tells me is "No files found."
Placed them several times there, zipped, unzipped, renamend, etc....always the same error....
Could someone help me in this, pls?
cheers,
Gigi
Click to expand...
Click to collapse
Hi,
Backup all data before starting anything new.
All coredroid roms come with detailed installation instructions.
Place the coredroid rom ZIP on the root of your sd card.
Flash new partition,go to CWM ,wipe data,cache partition,dalvik(advanced)>install zip from sd card>choose zip>install>reboot

Thanks....the installation description was for version 1.12....your description worked fine....thanks!

[Q] flashing failed :/

I tried to flash my HTC HD2 with this guide
http://forum.xda-developers.com/showthread.php?t=893948
after installing Hardspl 2.08 i used MAGLDR1.13
but now the phone just boots with white screen and HTC logo
i guess i forgot to install the radio?
but what now?
cant reach bootloader
just comes up for one second when i try hardreset
then asks for restoring to factory setting but that doesnt work neither
is it possible to autoflash with some sort of sd card
or do i have a chance to get at least usb connection up again ?
Thanks for help
edit
ive read that its possible to boot from sd card, using some sort of LEOIMG.nbh at root directory
extracted exe file and renamed "RUU_signed.nbh" to LEOIMG.nbh
ill try next step tommorow
gn8 ^^

You know the keys to get into bootloader isn't the same as for a hard reset, right?
Hold volume down only, tap and release power, release vol down only when stripey screen appears.

uhm, thanks ...
i swear it didnt work but for some reason now works
ive read in that guide
"3. Browse to the folder you extracted your NAND Android Package files to on your pc, right click on Run DAF.exe (or Install.exe if DAF.exe isnt present) and select Run as Administrator"
but in "Tyween's Typhoon CM7 v3.6.3" rom is neither daf or install.exe?
Do i have to launch magldr from pc and preload rom into it, befor transfering it into htc?
sorry ... im still confused
well okay i think i hav eto upload some files into it, but which? all of zip or do i have to upload the original zip?
inside that zip theres "boot, meta-inf and system"

Copy the whole zip to SD and install it from cwm.

ive done it, thanks

Please HELP!!

I took the plunge and decided to updgrade my HD2 to Android from Windows 6.5.
I did the following:
Radio to 2.**.51.**
Loaded HSPL 2.80
Flashed MAGLDR successfully.
I now turn on my phone hoping to see the MAGLDR menu through a 'long hold' on the on/off key but I get a white screen with htc in green and nothing else. The phone doesn't progress any further.
I've taken the battery out and tried again but same thing.
If I go into the bootloader menu, I get the coloured bars and at the top its got:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
Have I screwed it?

Got the radio wrong,, its 2.xx.50 you need not 51

Radio should be. 50 not. 51. Reflash radio from bootloader.
Sent from my Cyanogen HD2

Thanks guys. Flashed the correct Radio and now takes me into the MAGLDR menu.
However, another prob. I've been following instructions I got from a friend of a friend which states:
1. At Magldr menu, selct USB Flasher and run DAF.exe <done this successfully>
2. Once done, load clockwork mod <done this successfully>
3. Install the ROM from a zip file after copying this to the SD root. The zip file in my case is 'MCCM HD V5.1 CWR,NAND' and contains a Boot, Meta-inf and system folder.
When I try and run this through the Clockwork Mod i.e. 'Install zip from sd card' it runs but then aborts installation saying 'E:Can't open /sdcard/ROM/MCCM HD V5.1 CWR.NAND.zip (bad)'
Any ideas whats happening ?
Thanks

you arent unzipping the file are you? you don't need to open that zip to see what it contains. just put the whole zip on the sd card and choose it from cwm.

gurdevb said:
Thanks guys. Flashed the correct Radio and now takes me into the MAGLDR menu.
However, another prob. I've been following instructions I got from a friend of a friend which states:
1. At Magldr menu, selct USB Flasher and run DAF.exe <done this successfully>
2. Once done, load clockwork mod <done this successfully>
3. Install the ROM from a zip file after copying this to the SD root. The zip file in my case is 'MCCM HD V5.1 CWR,NAND' and contains a Boot, Meta-inf and system folder.
When I try and run this through the Clockwork Mod i.e. 'Install zip from sd card' it runs but then aborts installation saying 'E:Can't open /sdcard/ROM/MCCM HD V5.1 CWR.NAND.zip (bad)'
Any ideas whats happening ?
Thanks
Click to expand...
Click to collapse
Try redownloading the file. On my Optimus, it only says that upon bad download, or corrupted file.
Sent from my LG-VM670 using Tapatalk

gurdevb said:
Thanks guys. Flashed the correct Radio and now takes me into the MAGLDR menu.
However, another prob. I've been following instructions I got from a friend of a friend which states:
1. At Magldr menu, selct USB Flasher and run DAF.exe <done this successfully>
2. Once done, load clockwork mod <done this successfully>
3. Install the ROM from a zip file after copying this to the SD root. The zip file in my case is 'MCCM HD V5.1 CWR,NAND' and contains a Boot, Meta-inf and system folder.
When I try and run this through the Clockwork Mod i.e. 'Install zip from sd card' it runs but then aborts installation saying 'E:Can't open /sdcard/ROM/MCCM HD V5.1 CWR.NAND.zip (bad)'
Any ideas whats happening ?
Thanks
Click to expand...
Click to collapse
The folder is zipped when you put it on the SD card right? If not, then copy the original downloaded folder (zipped) to the SD card and try again.

Hi yes, I have left the file zipped.
Is there a link that anyone can post for this zip file please and I'll try it again.
Also once I've done this successfully, there is an Update.zip file that I think I have to run. Can anyone confirm this is the case?
Lastley, once I've done the above I'm guessing that I have the device in a state to now flash an Android type i.e. Gingerbread, Froyo, etc.
Is this true and what do you guys recommend - any links would be helpful.
I can almost taste the sweet succes of having Android on my HD2 !!

Then why bother flashing another ROM? Just skip the flashing MCCM's ROM and go straight to a ROM of your choice. As for which ROM, there are too many but I would recommend Typhoon CM7. The only way to know for sure is to try them out.

the CM rom is a very good choice

gurdevb said:
The zip file in my case is 'MCCM HD V5.1 CWR,NAND' and contains a Boot, Meta-inf and system folder.
Click to expand...
Click to collapse
gurdevb said:
Lastley, once I've done the above I'm guessing that I have the device in a state to now flash an Android type i.e. Gingerbread, Froyo, etc.
Click to expand...
Click to collapse
that was the rom being flashed. If you didn't want that rom, you should put a different rom.zip on your sd card, and possibly flash a different cwm partition layout in the previous steps.