About 3 buton recovery - Galaxy S I9000 General

This is what an employ from Samsung Romania said: "Lucram in service la solutionarea acestei probleme de recovery, in urmatoarele zile vom reveni cu rezultatele, va multumim pentru intelegere si ne pare rau ca ati intampinat aceste dificultati. Promitem ca le vom solutiona "
Translation: We are working in service to sort out this problem with "recovery", in the next days we will come with the results, thank you for your understanding and we are sorry about this problem. We promise that we will correct the problem.

This is good news

Have you checked out Facebook? There has been some progress there as well.
http://www.facebook.com/SamsungUKmobile?v=wall

That would be very nice,
kinda tricky to do things when i can't get into recovery.
if i get in a bootloop im screwed

Related

help please! my xperia x2 is dead :(

hi everyone i come from chile and my english is not good enough . sorry about that i hope you understand my problem :
i was updating my phone to the last version by SEUS , when the aplication downloaded the update and started to install the new rom in my cellphone i didnt see my usb cable then i kicked it and i lost the usb movil-pc conecction so, the installacion was interrupted in the the beggining when the green bar was getting up now my xperia x2 is death it didnt do anything, when a press power buttom it only make a litle vibration and nothing else it could possible my xperia doesnt have a OS right now ? my xperia dont even load the SE logo with the whit screen
andres27 said:
hi everyone i come from chile and my english is not good enough . sorry about that i hope you understand my problem :
i was updating my phone to the last version by SEUS , when the aplication downloaded the update and started to install the new rom in my cellphone i didnt see my usb cable then i kicked it and i lost the usb movil-pc conecction so, the installacion was interrupted in the the beggining when the green bar was getting up now my xperia x2 is death it didnt do anything, when a press power buttom it only make a litle vibration and nothing else it could possible my xperia doesnt have a OS right now ? my xperia dont even load the SE logo with the whit screen
Click to expand...
Click to collapse
Hola
1) Sacale la batería
2) Vuelve a colocarla
3) Manten presionado el botón de bajar volumen y vuelve a presionar el botón de encendido, manteniendo presionado el botón de encendido hasta que salga el logo de SE con el fondo blanco
4) Si aparece, puedes volver a intentar flashear con SEUS. Si no, me temo que ladrilleaste tu X2. Lo siento.
Saludos.
Jolo_ said:
Hola
1) Sacale la batería
2) Vuelve a colocarla
3) Manten presionado el botón de bajar volumen y vuelve a presionar el botón de encendido, manteniendo presionado el botón de encendido hasta que salga el logo de SE con el fondo blanco
4) Si aparece, puedes volver a intentar flashear con SEUS. Si no, me temo que ladrilleaste tu X2. Lo siento.
Saludos.
Click to expand...
Click to collapse
i already do that several times my friend and it's useless...i wonder if sony ericsson has suport in chile...since i bought my x2 in ebay usa
does anyone else know anything about it? even if one of us has a similar problem with the x1 could be helpful for me
andres27 said:
hi everyone i come from chile and my english is not good enough . sorry about that i hope you understand my problem :
i was updating my phone to the last version by SEUS , when the aplication downloaded the update and started to install the new rom in my cellphone i didnt see my usb cable then i kicked it and i lost the usb movil-pc conecction so, the installacion was interrupted in the the beggining when the green bar was getting up now my xperia x2 is death it didnt do anything, when a press power buttom it only make a litle vibration and nothing else it could possible my xperia doesnt have a OS right now ? my xperia dont even load the SE logo with the whit screen
Click to expand...
Click to collapse
I feel your pain! The exact same thing happened to me. There was nothing I could do but to send the phone for repair/exchange.
I have written about this in another thread here. You can not "Hard reset" the phone from the state your telephone is now as you eventually could have done with a X1 with its soft buttons. Obviously the service centre I sent my phone to couldn't do anything either since they today actually decided to exchange my phone. I guess they must have tried to kick some life back into it since they had it for a week. Prepare for yet a couple of weeks more without your precious
GL,A.D
i see, the problem is i dont have any guaranty from S.E i've bought my x2 from a chilean guy who bought the phone in ebay so that phone was "double-sold" i dont know how say it, there's no sony ericcson support in chile so i dont know who can fixed it , i wonder if the x2 hard-spl could be the great solution, off course ..if would exist....
Damn, that is a very bad mistake.
That is why thy caution you to make sure your phone is in a safe/stable place whilst it is updating and not to move it.
I hope you are able to get it sorted out soon. Good Luck!
lol, i about to cry guys i need my x2 back, i have faith it could be fixed, after all i've paid a lot of money for it
andres27 said:
lol, i about to cry guys i need my x2 back, i have faith it could be fixed, after all i've paid a lot of money for it
Click to expand...
Click to collapse
You have to check if SonyEricsson has global warranty, which i guess they do and start figuring out to what country you could send it to for service. A problem here is i guess you don't have the original receipt but on the other hand the phone hasn't been sold so long it can be outside warranty time. You're gonna have to phone or email SE support abroad to start with to see what options you have.

[Q] [Possible or not ?] Screen capture using buttons' combinaison (en - fr)

Hello there !
First of all, pardon my bad English (even if I'm studying it, at Louvain-la-Neuve, Belgium).
I'll put the French one at the end.
Second thing, I searched a topic talking about the subject that'll follow, but I didn't find the same topic as mine. Maybe I didn't look enough. In this case. forgive me.
Well, I'm a recent user of Android... and I really love it ! (iPhone sucks =))
Since I've got mine, I did everything I can with my I5800 aka Apollo.
I rooted it, I fixed the GPS, I put the live wallpapers, I changed the fonts and the bootanimation.
But there is still one thing I'd like to have...
It's about takin' a capture of the screen !
For the moment, I use the ddms in the SDK package.
Galaxy S users can use a combinaison of button to make one.
On the Apollo, this combinaison exists BUT doesn't work. ("Unable to capture screen. Try again").
My question is : is it possible to "ad" the same function for the Apollo ?
I know some apps do this thing, but as a student I'm always short of money..
Thank you in advance ! =)
PS : my mobile is Samsung Galaxy I5800, 2.2, XXJPA, rooted
_______________
Pour ceux qui parlent français (et mieux l'anglais que moi) :
J'ai eu beau chercher, je n'ai pas trouvé de topic similaire au mien. Peut-être que j'ai mal regardé, auquel cas, pardonnez-moi.
J'utilise Android depuis peu, et j'aime vraiment beaucoup !
Depuis que je le possède, j'ai fait tout ce qui était possible de faire avec mon I5800 Apollo.
Je l'ai rooté, j'ai réparé le GPS (changé le serveur), j'ai activé les live wallpapers, j'ai modifié la police du système et même l'animation de boot.
Mais il me manque quelque chose que j'aimerais avoir...
C'est à propos des captures d'écran !
Pour l'instant, j'utilise un programme du pack SDK.
Sur le Galaxy S, il est possible de faire une capture d'écran via la combinaison de certaines touches.
Sur l'Apollo, cette combinaison existe mais ne fonctionne pas. Elle affiche un message d'erreur.
Ma question est : est-il possible d'activer cette fonction sur l'Apollo ?
Je sais qu'il existe des applications permettant de le faire, mais étant un étudiant, je suis souvent à court d'argent..
D'avance, merci ! =)
First, your english isnt bad at all....
Second, sorry i cant help you out with the screenshot thing
Third, how did u fix the gps? did u use the Gps booster app? can u pls upload it here?
Thank you about my English ! That gives me great hope for my exam comming soon ^^
For the GPS thing, well, there's a file named gps.conf
I downloaded one, changed the server location which is used by this file to connect you, and replace the gps.conf on the phone by the one I changed.
To change the server, use a program like Note Pad ++, or something like that.
Open the gps.conf file I give below and look after NTP_SERVER=fr.pool.ntp.org
Change fr by usa or ca for the Canadian for exemple.
Save, and put this file in your SDcard.
Then, two ways to change the first one by the new one (need to be root) :
FIRST :
open Terminal Emulator
enter su
enter remount rw
enter cat /sdcard/gps.conf > /system/etc/gps.conf
reboot
SECOND :
use a program like Root Explorer or Super Manager (free) and simply copy/paste from the SDcard to /system/etc.
Don't forget to delete the previous one.
How U change bootanimation. Please give link, it's appreciated.
It is possible
hey dude taking the screen shot of your phone is possible... but u,ll need to connect your mobile to a laptop...
Download and install phone explorer from here
http://www.fjsoft.at/en/
select usb debugging mode and connect your mobile to your laptop via usb
open phonexplorer and connect your phone
then in the extras menu u will find an option to take the screen shot of your phone...
see if it helps
Neo, I know about this way ; but I use the ddms on the SDK/tools.
madhuranand007, I'll put it later. It's not the subject here.
But, when I said "bootanimation", it's the animation following the firts one (with the space background), you see it ?
Edit : have a quick look around the XDA/Android subjects, and you'll find an answer to change the animation (replace the blinking Samsung).
Does anybody have an idea ? A solution ?
I just want to know if it's possible or not.
If yes, tell me how to do, please =)
neo1691 said:
hey dude taking the screen shot of your phone is possible... but u,ll need to connect your mobile to a laptop...
Download and install phone explorer from here
http://www.fjsoft.at/en/
select usb debugging mode and connect your mobile to your laptop via usb
open phonexplorer and connect your phone
then in the extras menu u will find an option to take the screen shot of your phone...
see if it helps
Click to expand...
Click to collapse
It really works thumbs up
Dude, as I said, I already know this way, but I use a "program" called ddms which is included on the SDK/tools.
All I want to know is.. see my first post ;-)
I have a Galaxy 3 with froyo and just press End & Home, the phone take a pict of the screen, even if is a program or whatever
.........................
the screenshot bug that you have mentioned in the first post was present in one of the earliest froyo roms...... it was then fixed in later builds like JPM....... which build are you using?
Also i would suggest you try out custom roms like indroid, kyrillos etc....... the bug is definitely fixed in those roms........
And as for your english it's not bad at all!
Hey its very simple. Just keep pressing the back button and press home button one.You will get notification screen captured saved as image.You Can see the screen shots in gallary.
madhuranand007 said:
How U change bootanimation. Please give link, it's appreciated.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1038964
^There's many of them and there's also instructions
And @Vermillon, try out JPM or custom ROMs using JPM as base screenshot bug is fixed in them.
maybe u cud get some help from this link.
http://forum.xda-developers.com/showpost.php?p=11100776&postcount=3602
;-)
Sent from my GT-I5801 using XDA App
theres very simple soln....for ur prob dude....in earlier froyo roms the screencaptureservice.apk didnt use to work.....try this http://www.multiupload.com/UOZHPPPX00 copy the app to system/app folder using rootexplorer and reboot....then after ur device reboots just press back button for 2 secs and immediately press home button.......and ur english is good buddy.

UPDATE A PROBLEM INSTALLING 2.3.4 WebTop TELCEL ATRIX

hello
I have a problem in my motorola Atrix, buy it with the company Telcel in Mexico, upgrade to version 2.3.4 with the system 45.0.7.MB860.ORANGE.EN.FR WITH 2.6.32.9 kernel version.
the situation is as follows.
when updating the manual for Atrix of Mexico that is on the next page. is in Spanish.
w w w . jorgevenegas.com/2011/08/actualizar-motorola-atrix-de-telcel-de
unlock the file start-lite.sbf zomgunlock
throw me an error .... could not run
use file-intl-fix and it worked try1.sbf
Unlocked cell correctly
Carry out the installation of the system with the following tutorial
w w w .jorgevenegas.com/2011/08/actualizar-motorola-atrix-de-telcel-de_02
install the new 2.3.4. everything correctly.
when trying to install webtop (weptop.img) threw me the following error
"load_file: could not allocate 805306368 bytes error: can not load webtop.img"
I can not install the webtop
I have updated the system but does not start webtop that I have not installed webtop.img
sorry for my English, but use a translator to help
I hope I can help ..
EN: Are you using the 'moto-fastboot'?
--
SP: Estás usando el 'moto-fastboot', cierto?
So you cant install webtop?
I can help you in spanish...email me and/or gtalk at [email protected]
Sent from my OC'd Motorola™ Atrix®
turl1 said:
EN: Are you using the 'moto-fastboot'?
--
SP: Estás usando el 'moto-fastboot', cierto?
Click to expand...
Click to collapse
hello
yes
Aqui yo lo logre!
w w w. underground . o r g . m x/index.php?topic=27287.msg139955#msg139955
Saludos
Im not have Webtop too T.T
Sorry just wanted to know if they could help me because I am in the same situation, just follow the tutorial and achieve Jorge Venegas French ROM install 2.3.4 and my Atrix works great, the only detail is the WebTop that gives me the TT will be no charge option or any way you could use it and set it again?? thanks
Disculpen solo queria saber si podrian ayudarme dado que estoy en la misma situacion, igual segui el tutorial de Jorge Venegas y logre instalar la ROM francesa 2.3.4 y mi Atrix funciona de maravilla; el unico detalle es con el WEBTOP que no me da la opcion ni carga T.T habra alguna forma de poder usarlo y configurarlo de nuevo ??? gracias
Stop following that guys blog.... lots of mexican atrix users with problems.
I followed guides here at xda and my phone is fully functional.
Sent from my OC'd Motorola™ Atrix®
misho52 said:
Sorry just wanted to know if they could help me because I am in the same situation, just follow the tutorial and achieve Jorge Venegas French ROM install 2.3.4 and my Atrix works great, the only detail is the WebTop that gives me the TT will be no charge option or any way you could use it and set it again?? thanks
Disculpen solo queria saber si podrian ayudarme dado que estoy en la misma situacion, igual segui el tutorial de Jorge Venegas y logre instalar la ROM francesa 2.3.4 y mi Atrix funciona de maravilla; el unico detalle es con el WEBTOP que no me da la opcion ni carga T.T habra alguna forma de poder usarlo y configurarlo de nuevo ??? gracias
Click to expand...
Click to collapse
Flash Joes Webtop. Same I told ianus.
Sent from my OC'd Motorola™ Atrix®
Yep, proceed exactly as found in the dev´s forum (from XDA obviously). I highly recommend the full BELL 2.3.4 Atrix over the leaked Orange France. Been using it from a while and everything is just fine.
Look for Bell Atrix 2.3.4 Gobstopper, from NFHimself. Good luck!
---------- Post added at 08:29 AM ---------- Previous post was at 07:52 AM ----------
Hey, me again! Well bud, if you are interested I wrote a post some time ago about what I mentioned just above, of course those are posts from real dev´s, which I thank a lot! (Credits go for them as always. NFHimselh and Eval, and so on...!) And thought this could be for help for you.
I´ve added, as you´ll realise, some own mods to procedures due to lost capabilities, howewer, after sorting those as directed, you´ll have, as stated, a very very reliable and full-functional Mexican Atrix.
This is the link to the post, cheers! God bless my beloved tequilita, mmmm!!!!
http://forum.xda-developers.com/showpost.php?p=17617098&postcount=150
Niiiceee.
Sent from my OC'd Motorola™ Atrix®
titusxperia10 said:
Yep, proceed exactly as found in the dev´s forum (from XDA obviously). I highly recommend the full BELL 2.3.4 Atrix over the leaked Orange France. Been using it from a while and everything is just fine.
Look for Bell Atrix 2.3.4 Gobstopper, from NFHimself. Good luck!
---------- Post added at 08:29 AM ---------- Previous post was at 07:52 AM ----------
Hey, me again! Well bud, if you are interested I wrote a post some time ago about what I mentioned just above, of course those are posts from real dev´s, which I thank a lot! (Credits go for them as always. NFHimselh and Eval, and so on...!) And thought this could be for help for you.
I´ve added, as you´ll realise, some own mods to procedures due to lost capabilities, howewer, after sorting those as directed, you´ll have, as stated, a very very reliable and full-functional Mexican Atrix.
This is the link to the post, cheers! God bless my beloved tequilita, mmmm!!!!
http://forum.xda-developers.com/showpost.php?p=17617098&postcount=150
Click to expand...
Click to collapse
i used the tutorials in here, used a zip file for flashing to the att 4.5.91 with 2.3.4 , but i get no webtop option in the popup, any ideas?
(entertainment center works fine if i select it)
and i got no errors during flashing the zip file
Any update on this i have the same problem i can install the webtop by moto-fastboot but when i connect the cellphone to the dock it did not show the popup asking me for webtop or multimedia center i have only put as a clock option
Thanks for your help
carlos20h said:
Any update on this i have the same problem i can install the webtop by moto-fastboot but when i connect the cellphone to the dock it did not show the popup asking me for webtop or multimedia center i have only put as a clock option
Thanks for your help
Click to expand...
Click to collapse
i solved this using the first post instrucctions on this link
http://forum.xda-developers.com/showthread.php?t=1144119

HTC HD2 stuck..

Hi all, I have a HTC HD 2 and does not want to go ... it is cold starts and goes without any problems ... it is less hot locks or turns off and not let go ... if it in the refrigerator 5 minute I can use to reach room temperature and then I get stuck and ... what can I do? well please help me: ((
I have the exact same problem - Massive overheating issues!!!!!
ok ... and can do something to repair or ...?
cosmy032 said:
ok ... and can do something to repair or ...?
Click to expand...
Click to collapse
Not really...
E un romanas pe-aici, facdemol isi zice, care are el o metoda ce reuseste uneori, dar mie nu a catadicsit sa-mi raspunda ptr. aceeasi problema!
Poate reusesti tu...
Anunta-ma si pe mine!
Bafta!
ok...dar cum dau de el?
cosmy032 said:
ok...dar cum dau de el?
Click to expand...
Click to collapse
Here's his thread:
http://forum.xda-developers.com/showthread.php?t=982454.
Si nu uita sa-mi citesti semnatura!
cosmy032 said:
ok...dar cum dau de el?
Click to expand...
Click to collapse
Any news?
Niscai noutati?
Craciun fericit!
you can either keep calling your provider for a replacement phone or just change it to android rom for htc hd2
those at the service said the phone has nothing ... did not find anything on it .. if any of the RO know where to take another plate of HTC HD2 please let me know. sorry for my English

Mxq pro max

Hello need info on this box
I can not find any forum that talks about this one
I will like the identified what would help me found a rom
I'm counting on you
(MXQ Pro Max 4GB 32GB ram)
Bonjour besoin d'info sur cette box
Je ne trouve aucun forum qui parle de celle-ci
J'aimerai l'identifiés ce qui m'aiderait a trouvé une rom
Je compte beaucoup sur vous
(MXQ Pro Max 4go ram 32go )
X-Rudboy-X said:
Hello need info on this box
I can not find any forum that talks about this one
I will like the identified what would help me found a rom
I'm counting on you
(MXQ Pro Max 4GB 32GB ram)
Bonjour besoin d'info sur cette box
Je ne trouve aucun forum qui parle de celle-ci
J'aimerai l'identifiés ce qui m'aiderait a trouvé une rom
Je compte beaucoup sur vous
(MXQ Pro Max 4go ram 32go )
Click to expand...
Click to collapse
Hi mate do you know what processor and wifi chip you have in it?
Possesseur rockchip rk3328
Et carte wifi comment savoir ?
X-Rudboy-X said:
Possesseur rockchip rk3328
Et carte wifi comment savoir ?
Click to expand...
Click to collapse
Ok I think this is your wifi chip it should start with RTL
Ok laissez-moi le temps de la re démonter et je vous tiens informé
Je tiens au passage à vous remercier car sur aucun d'autres forum on ne me répond
Rtl8723cs
1212m13
g124
Keep it to English please
pcmender2005 said:
Keep it to English please
Click to expand...
Click to collapse
Sorry for my english
I will make an effort
X-Rudboy-X said:
Rtl8723cs
1212m13
g124
Click to expand...
Click to collapse
This android 9.0 will work on your box.
I have it on mine and my box is a mrx pro with a rk3328 and rtl8723 here is the link
https://chinagadgetsreviews.com/download-android-9-0-firmware-for-a5x-max-tv-box.html
Use the tools I have ringed and read the doc to help you. I am not responsible if you have trouble flashing.
thank you very much for your help I'm a little afraid to start this one does not work I'm afraid I did not find my original rom:confus:
X-Rudboy-X said:
thank you very much for your help I'm a little afraid to start this one does not work I'm afraid I did not find my original rom:confus:
Click to expand...
Click to collapse
You can use any of them roms on that link I gave you b4.
I know what you mean mate but it's the only way you will upgrade your box most of the boxes all share the same software I been flashing rims for years and i have never killed a android box, phone or a car radio. Trust me if you follow the doc you will be ok. Here are the tools you will need to flash that rom to your box.
https://www.dropbox.com/sh/fo23lbyehsh71sp/AADv_Z7u1Ic0h9-ZSeBRLLd7a?dl=0
OK I will trust you but especially do not abandon me it does not work I will still need you
QUOTE=pcmender2005;78883176]You can use any of them roms on that link I gave you b4.
I know what you mean mate but it's the only way you will upgrade your box most of the boxes all share the same software I been flashing rims for years and i have never killed a android box, phone or a car radio. Trust me if you follow the doc you will be ok. Here are the tools you will need to flash that rom to your box.
https://www.dropbox.com/sh/fo23lbyehsh71sp/AADv_Z7u1Ic0h9-ZSeBRLLd7a?dl=0[/QUOTE]
X-Rudboy-X said:
OK I will trust you but especially do not abandon me it does not work I will still need you
QUOTE=pcmender2005;78883176]You can use any of them roms on that link I gave you b4.
I know what you mean mate but it's the only way you will upgrade your box most of the boxes all share the same software I been flashing rims for years and i have never killed a android box, phone or a car radio. Trust me if you follow the doc you will be ok. Here are the tools you will need to flash that rom to your box.
https://www.dropbox.com/sh/fo23lbyehsh71sp/AADv_Z7u1Ic0h9-ZSeBRLLd7a?dl=0
Click to expand...
Click to collapse
[/QUOTE]
I will be here i won't abandon you, but I do work long hours i will answer you when I can mate
Thank's
still not tested I am very afraid that it will miss
I just tested and it worked all works fine just impossible to activate my Bluetooth someone has an idea that my Bluetooth is not working
Here are some pics
Some more
yes that's what I did except that the bluetooth tab is grayed out
here I found a firmware that works on my box plus it looks like mine has everything works thanks to you for your help for info here is this firmware
https://mega.nz/#!RBsxUQAI!F5AFKGVE9_Mgi_DYsNv0w3CfTUy0dWtv72zs8ws3HDY

Categories

Resources