Database Users

[Q] eLocity just quit...won't boot up

I have been running my a7 with dexter's mod 1.4 for about 1 1/2 weeks...everything has gone well. This afternoon I turned on the device and it failed to complete boot. The word Android would come up and then nothing. I tried to reboot, reset, but device would do neither...nor would it turn off completely. I kept trying to take it into recovery mode and then after several tries was able to wipe, do update again, and get everything back as before. What would cause this and should I look for this to happen again? deepmagic
My a7 was running well for about a week since it quit...but today when I booted up device, it failed to recognize sd card...same card used for updating to mod 1.4...same card I've been using to listen to my music, etc...but now won't recognize...I've tried two different micro sdhc cards..formatted, reformatted, but device continues to display mount sd card...all else works fine! Does anyone have any new ideas? I can't even reinstall mod since a7 can't read my cards. Thanks for any input that would be helpful. I understand these issues are ongoing for many out there...what to do?

deepmagic said:
I have been running my a7 with dexter's mod 1.4 for about 1 1/2 weeks...everything has gone well. This afternoon I turned on the device and it failed to complete boot. The word Android would come up and then nothing. I tried to reboot, reset, but device would do neither...nor would it turn off completely. I kept trying to take it into recovery mode and then after several tries was able to wipe, do update again, and get everything back as before. What would cause this and should I look for this to happen again? deepmagic
Click to expand...
Click to collapse
Mine has hung on a black screen on me. Seemed that it didn't fully come out of sleep mode.
I was able to recover by holding the power button for 15 seconds to hard power down. No data loss.

deepmagic said:
I have been running my a7 with dexter's mod 1.4 for about 1 1/2 weeks...everything has gone well. This afternoon I turned on the device and it failed to complete boot. The word Android would come up and then nothing. I tried to reboot, reset, but device would do neither...nor would it turn off completely. I kept trying to take it into recovery mode and then after several tries was able to wipe, do update again, and get everything back as before. What would cause this and should I look for this to happen again? deepmagic
Click to expand...
Click to collapse
Exact same thing happened to me this morning. Tried to reset - not happening. Hard powered down. Don't have time to try anything else right now. I'm new to the forums and new to android. Wish me luck! I've been loving my A7, and much appreciation to Dexter and all the other knowledgeable hackers/modders/posters.

hey the same thing happened 2 me twice. Once the first day after i got it, since i had only had it for 1 day i wiped it reinstalled dexter's mod 1.41 and it worked. First app i installed was backup root. Now, a week later the exact same thing is happening. This time i dont want to wipe it because of all of the apps i have installed, games ive played etc. Any ideas? Could we just try reinstalling dexter's md without wiping? Or wiping reinstalling and recover from a backup?
Also have you installed busybox? I had just installed it both times before it failed to turn on. Maybe its just coincidence but you never know..
-D
Thanks to anyone who can help! and also thanks Dexter for all your hard work as well as everyone else that has contributed to the elocity, im lovin it! (when it works )

success!!!!
I got it to work! I don't have a permanent fix but if it happens again just boot into recovery and reinstall the dexter's mod update 1.41 and it works again! No wiping required. This isn't a permanent fix but it will work until we find one
-Dylan

Hasn't happened to me (yet) but I didn't upgrade to the newest ROM. I'm still using 1.3and it has been very stable. Only issue I've had was when I tried to use Killswitch to go to sleep mode when the cover is shut (great idea) but it didn't work and froze all except the live wallpaper. Weird.
Good luck, guys.

in the event it does happen to you, you might want to check out my apx thread for reflashing the factory firmware if you can't get your tablet unstuck. theres alternatives if you don't want to get stuck again.

The method you outline seems so complex...way above my abilities, but makes me wish I had followed though on some early programming training opportunities. That was the road not travelled.

okantomi; while i wouldn't encourage others to follow thru with procedures they fear would cause more harm, i would mention that if you google up my nick you'll find i've been able to do much w/ android software and devices while not knowing anything about programming. if i can do it, anyone can. i just wanted some themes for my phone.
i'm just an android hobbyist by night (and when i get a chance during the day), and a computer tech by day. no programming expertise, but i can reasonably reverse engineer and port software and components using simple file managers like ztreewin(trialware).
don't be mistaken that the folks out there providing you solutions necessarily know anything about programming or software development. just how to chef up files at different levels. i understand this doesn't go for everybody.

Thanks for the encouragement. I'm impressed with what you've been able to do. It is also nice to read upbeat comments about the A7. There is something sort of special about a device that you really almost have to build yourself... putting so much into it... biting your fingernails to nubs with each ROM flashing. You don't get as attached to any device that is 100 percent complete right out of the box, though of course there would be a lot less aggravation.

[Q] sgh 1337 UN stuck on Samsung splash screen (safe strap broken)

So, I have gotten myself in a bit of a pickle I however think I can get out of it by sideloading using EXT. SD, Im not sure what to flash to solve the dillemma however. So this is the situation. I have a (had) a rooted Galaxy s4 (sgh-i337 ucufnc1) with 4.4.2 android. It had safestrap installed and back ups of everything else in sd card and other locations just in case. The phone was acting buggy, so I formatted the phone with safestrap, the problem persisted, ill get into the issue a bit further down. So I booted back into safestrap, and did a complete wipe, however my sd card must've bumped out, because it didnt delete any media files or so it said, and then after the wipe it crashed. and refuses to boot into safestrap or even past the splash logo. I can get into download mode, but usb debugging isnt on anymore since i wiped it, I can get into the other mode as well ( cant for the life of me remember the name of it atm although i use it frequently) with some luck. I also happen to have all .md5 files from a backup i did about 4 months ago in tact, I cannot for the life of me get them to convert properly to apply them to the phone without safestrap however, if anyone has any insight to this please let me know also.
I can/will list any other information I have if anyone needs it, and if anyone can help it would safe a life!
The reason i reformatted it to begin with, was because media would stall, and when i plugged in the audio jack it'd freeze the entire app using it, then the whole phone would freeze. I believe it was due to lucky patcher but im unsure. The issue began when I altered the auto update file, and even after i rectified it, it persisted. At this time i have a phone soft bricked because it didnt delete all the media files and I assume something bugged onto the kernel image but Im not sure. If I can simply try to restore it to stock kernel then im fine with that.

Ghujii said:
So, I have gotten myself in a bit of a pickle I however think I can get out of it by sideloading using EXT. SD, Im not sure what to flash to solve the dillemma however. So this is the situation. I have a (had) a rooted Galaxy s4 (sgh-i337 ucufnc1) with 4.4.2 android. It had safestrap installed and back ups of everything else in sd card and other locations just in case. The phone was acting buggy, so I formatted the phone with safestrap, the problem persisted, ill get into the issue a bit further down. So I booted back into safestrap, and did a complete wipe, however my sd card must've bumped out, because it didnt delete any media files or so it said, and then after the wipe it crashed. and refuses to boot into safestrap or even past the splash logo. I can get into download mode, but usb debugging isnt on anymore since i wiped it, I can get into the other mode as well ( cant for the life of me remember the name of it atm although i use it frequently) with some luck. I also happen to have all .md5 files from a backup i did about 4 months ago in tact, I cannot for the life of me get them to convert properly to apply them to the phone without safestrap however, if anyone has any insight to this please let me know also.
I can/will list any other information I have if anyone needs it, and if anyone can help it would safe a life!
The reason i reformatted it to begin with, was because media would stall, and when i plugged in the audio jack it'd freeze the entire app using it, then the whole phone would freeze. I believe it was due to lucky patcher but im unsure. The issue began when I altered the auto update file, and even after i rectified it, it persisted. At this time i have a phone soft bricked because it didnt delete all the media files and I assume something bugged onto the kernel image but Im not sure. If I can simply try to restore it to stock kernel then im fine with that.
Click to expand...
Click to collapse
UPDATE: I resolved the issue, by rooting, safestrapping, ripping the image files, from another galaxy s4 with alike descriptions. then i managed to side load it, then it booted properly, i then reformatted it completely back to 100% factory everything. Now my original problem persists, and i cant help feel that google services is causing it. (examnples of issues" proccess.gapps has stopped. anotrher process error code. phone calls can be made, but not recieved as it seems the server is too busy to n otice it, massive battery drain, audio takes several seconds to play, while video continues to play fine, audiojack is mostly unresponsive, phone calls that are made cannot recieve or send audio during call session, phone may freeze at unlock screen, or any time during operation, may even reboot from process overloading" now keep in mind. i removed every system file and app that the natural reformat will allow. so nothing applied by the user is on the phone, other than natural factory applications. Im digging a bit into the phone as i can but its a slow process whenit starts freezing. if anyone has any idea of what can be causing this, or how to fix this please inform me lol.

Ghujii said:
UPDATE: I resolved the issue, by rooting, safestrapping, ripping the image files, from another galaxy s4 with alike descriptions. then i managed to side load it, then it booted properly, i then reformatted it completely back to 100% factory everything. Now my original problem persists, and i cant help feel that google services is causing it. (examnples of issues" proccess.gapps has stopped. anotrher process error code. phone calls can be made, but not recieved as it seems the server is too busy to n otice it, massive battery drain, audio takes several seconds to play, while video continues to play fine, audiojack is mostly unresponsive, phone calls that are made cannot recieve or send audio during call session, phone may freeze at unlock screen, or any time during operation, may even reboot from process overloading" now keep in mind. i removed every system file and app that the natural reformat will allow. so nothing applied by the user is on the phone, other than natural factory applications. Im digging a bit into the phone as i can but its a slow process whenit starts freezing. if anyone has any idea of what can be causing this, or how to fix this please inform me lol.
Click to expand...
Click to collapse
The best solution must be installing the stock firmware via odin. Since you are on NC1 , You can installed the stock NB1.
Here is guide explaining you using odin, installing NB1, root with towel root, updated NC1, install the safestrap. The guide was not specifically written for that but you can find those steps in the guide.

I will attempt to do this, since nothing since has work. I am about to get a new logic board for the system in the next 2 weeks. Towel root DOES typically work on this system, however the last time I attmpted it it failed to work outright. Im not sure what has changed with the device, but i believe reflashing stock is the best method. The phone now, will boot up, then skip the lock screen and go straight to the home screen, which is black with no pull down bar, or with no signal and there is no way to rectify it. Even if there were, it boots back down and launches back up and becomes locked at the ATT logo.
After a fair bit of messing with it, and recovery mode it will sometimes boot normally where it tells me that processes has failed and askes me to cancel the ''app''. This is the best option to update the phone and attempt root, but getting it here is so difficult because it reboots itself and the mode is rare to acquire. This problem either is due to the kernel, or the rom i believe. I also am to believe the powercell may have some issue, as i replaced the battery a few weeks back and it worked fine for about 1 week.
Booting into safemode doesnt work either as it skips over the lock screen straight to the home screen. Outsidce of replacing the logic board, or attempting another flash im at the end of the short rope i was already on in terms of options.

sway8966 said:
The best solution must be installing the stock firmware via odin. Since you are on NC1 , You can installed the stock NB1.
Here is guide explaining you using odin, installing NB1, root with towel root, updated NC1, install the safestrap. The guide was not specifically written for that but you can find those steps in the guide.
Click to expand...
Click to collapse
UPDATE: I found therein two methods to flashback to stock. I did so, then proceeded to attempt to flash from nb1 to nj4. Progress stopped there when it flung an error 7 at me. So this means either something in my phone is corrupted or the file i downloaded from the above mentioned forum is corrupted. I also attempted flashfire, but seen as it STILL crashes at random due to process errors thats almost impossible to attempt.

G935A Bootloops every 1-2 weeks after un-rooting

This is a pretty weird one, so I'm gonna cut to the chase...
Several weeks ago I got my a new phone (Galaxy s7 Edge, AT&T, Qualcomm) and everything was fine. I'd never rooted a phone before and wanted to try it out, even though the Edge was still pretty new. After about 2-3 weeks of owning my phone, I followed a guide to root. The root only worked after a factory reset, so I lost my apps and pictures, but it wasn't a big deal because it was just a couple weeks' worth of stuff. Everything works fine for a month or so, and then most of the apps started crashing. Some, like Google Chrome or Spotify would work, but most didn't. All the services on my phone also stopped. I figured it was a problem with the root and said oh well and factory reset my phone. I set it up normally again and all was well. But then things got weird.
Now, after about 1 week, my phone will do the same thing as when rooted. First Snapchat stops working, followed by a multitude of other apps. Google Play store stops opening, I'm unable to install apps, and several core features of the phone just freeze up. If i try rebooting (how I discovered the issue), my phone gets stuck in a bootloop and I have to factory reset to work again. My phone did this again today after a few times so finally I'm coming here for help. I also recently discovered that factory resetting my phone from the settings app did nothing, as soon as I rebooted it went into a bootloop. So the only way to recover my phone is to factory reset from the recovery mode. It may also be worth noting that I used ODIN to flash the AP, BL, CP, and CSC stock firmware (G935AUCU1APB5 etc...) after I wanted to unroot. I have absolutely no clue what's wrong and any fixes or even an explanation would be greatly appreciated.

go into recovery and try cleaning the caches, there maybe stray bits of old code floating around.

Cosmic Blue said:
go into recovery and try cleaning the caches, there maybe stray bits of old code floating around.
Click to expand...
Click to collapse
Yeah I've done that a couple times. I went ahead and did it just now though so we'll see

[A2017G] LineageOS 14.1 - Can not access TWRP anymore, can't get through setup either

Hey folks,
I did not find anything on this issue, seems to be rather unique. Let me describe the problem.
This is my father's Axon 7 and he wanted me to get him a different ROM on there, which I did, and it worked smoothly until today. It kept crashing, freezing and was literally unusable for unknown reasons.
So since he was going to be gone for the next few days, I had no choice but to remove the ROM and data and reflash it. HOWEVER I did not delete the internal storage since I did not think it would be necessary. Sitting in the setup, I had issues getting through it, it will not pop up the keyboard to let me type the wifi password neither does it let me pass through if I wanted to use mobile data. It simply gets stuck. Sometimes random android processes tend to crash and put me at the start of the setup and I can't get to the settings which does prevent me from enabling USB-debugging or OEM unlock.
If I try to get into the recovery (which is still on there) it will simply get stuck on the screen that says ZTE, did not work through fastboot either, same issue.
(I do personally think that some app data is corrupted and causes the issue, since I wiped everything except internal storage and I still have major issues)
So here am I, stuck. I hope someone can enlighten me, or tell me how stupid I am and point me at something completely obvious. Thanks

OmegaFighter said:
Hey folks,
I did not find anything on this issue, seems to be rather unique. Let me describe the problem.
This is my father's Axon 7 and he wanted me to get him a different ROM on there, which I did, and it worked smoothly until today. It kept crashing, freezing and was literally unusable for unknown reasons.
So since he was going to be gone for the next few days, I had no choice but to remove the ROM and data and reflash it. HOWEVER I did not delete the internal storage since I did not think it would be necessary. Sitting in the setup, I had issues getting through it, it will not pop up the keyboard to let me type the wifi password neither does it let me pass through if I wanted to use mobile data. It simply gets stuck. Sometimes random android processes tend to crash and put me at the start of the setup and I can't get to the settings which does prevent me from enabling USB-debugging or OEM unlock.
If I try to get into the recovery (which is still on there) it will simply get stuck on the screen that says ZTE, did not work through fastboot either, same issue.
(I do personally think that some app data is corrupted and causes the issue, since I wiped everything except internal storage and I still have major issues)
So here am I, stuck. I hope someone can enlighten me, or tell me how stupid I am and point me at something completely obvious. Thanks
Click to expand...
Click to collapse
well, you can use EDL maybe?
The fastest way out is downloading the A2017G_FULL_EDL file from our Russian friends and use MiFlash while in EDL mode to flash the cluster**ck of a phone that you have.
The closest thing I've seen was a friend's Galaxy Grand 2 (like 5 years old) that maybe had a part of the system corrupted or a slightly dead eMMC. a bunch of stuff just crashed for no apparent reason. I reflashed the system and it got fixed for some time, then it started doing some weird sh!t again (after booting, you have an 80% chance that it will just freeze forever, hard reboot needed). But let's hope for the best and see if you can recover it by reflashing stock totally. If it still doesn't work you might be able to relock the BL and claim the warranty

Choose an username... said:
well, you can use EDL maybe?
The fastest way out is downloading the A2017G_FULL_EDL file from our Russian friends and use MiFlash while in EDL mode to flash the cluster**ck of a phone that you have.
The closest thing I've seen was a friend's Galaxy Grand 2 (like 5 years old) that maybe had a part of the system corrupted or a slightly dead eMMC. a bunch of stuff just crashed for no apparent reason. I reflashed the system and it got fixed for some time, then it started doing some weird sh!t again (after booting, you have an 80% chance that it will just freeze forever, hard reboot needed). But let's hope for the best and see if you can recover it by reflashing stock totally. If it still doesn't work you might be able to relock the BL and claim the warranty
Click to expand...
Click to collapse
Hey,
After a long day I managed to fix it, I was able to use the adb in fastboot and could reinstall the recovery and managed to run it, deleted internal storage and reinstalled everything. Seems to have done the trick. I hope it will keep working now.

OmegaFighter said:
Hey,
After a long day I managed to fix it, I was able to use the adb in fastboot and could reinstall the recovery and managed to run it, deleted internal storage and reinstalled everything. Seems to have done the trick. I hope it will keep working now.
Click to expand...
Click to collapse
good

LG G2 D802 Bootloop Problem?

Hi,
I have an old G2 which had lineageOS on it, and I wanted to go completely google free and uninstall google play services and stuff, but it seemed my device wasn't rooted (by checking for # in a terminal). I'm completely new to rooting and flashing and everything. Basically I decided I was going to ignore the fact that my brother had already changed things on the phone and I was just going to try and follow a guide to root it and then put whatever ROM I wanted on. Apparently my phone was encrypted, and this needed to be changed before I could do anything so I tried to do a factory reset. When I did this, I ended up in TWRP, which is apparently installed and tried to do a factory reset in that. It prompted me to install Super User or something which seemed like an easy way to root so I said yes. The problem is, the phone never loads. I left it for a good 2 hours to do the factory reset, then it seemed it was not doing anything so I restarted and messed around more. The result is, it is just stuck looking like it's loading up (I assume that's called a bootloop).
So my question is how can I get this phone back into usable condition, I'm not fussed about finishing what I started necessarily, I just need a usable phone. There seems to be good news in that I can access TWRP (v2.8.6.1), which I guess would be useful if I knew how to use it.
Thanks for any help
EDIT/SOLVED: I managed to get it working by going into TWRP, wiping cache and dalvik, installing a new build of lineageos i had already downloaded, not installing superuser, wiping the cache and dalvik again, and rebooting system, and a fresh start of lineage finally loaded. Doubt that's relevant to many people but thought I'd share anyway.

brokemyG2 said:
Hi,
I have an old G2 which had lineageOS on it, and I wanted to go completely google free and uninstall google play services and stuff, but it seemed my device wasn't rooted (by checking for # in a terminal). I'm completely new to rooting and flashing and everything. Basically I decided I was going to ignore the fact that my brother had already changed things on the phone and I was just going to try and follow a guide to root it and then put whatever ROM I wanted on. Apparently my phone was encrypted, and this needed to be changed before I could do anything so I tried to do a factory reset. When I did this, I ended up in TWRP, which is apparently installed and tried to do a factory reset in that. It prompted me to install Super User or something which seemed like an easy way to root so I said yes. The problem is, the phone never loads. I left it for a good 2 hours to do the factory reset, then it seemed it was not doing anything so I restarted and messed around more. The result is, it is just stuck looking like it's loading up (I assume that's called a bootloop).
So my question is how can I get this phone back into usable condition, I'm not fussed about finishing what I started necessarily, I just need a usable phone. There seems to be good news in that I can access TWRP (v2.8.6.1), which I guess would be useful if I knew how to use it.
Thanks for any help
Click to expand...
Click to collapse
you can access the twrp with the power off button and volume less when the lg logo looses the power on and you press again:fingers-crossed:
---------- Post added at 10:04 AM ---------- Previous post was at 10:02 AM ----------
brokemyG2 said:
Hi,
I have an old G2 which had lineageOS on it, and I wanted to go completely google free and uninstall google play services and stuff, but it seemed my device wasn't rooted (by checking for # in a terminal). I'm completely new to rooting and flashing and everything. Basically I decided I was going to ignore the fact that my brother had already changed things on the phone and I was just going to try and follow a guide to root it and then put whatever ROM I wanted on. Apparently my phone was encrypted, and this needed to be changed before I could do anything so I tried to do a factory reset. When I did this, I ended up in TWRP, which is apparently installed and tried to do a factory reset in that. It prompted me to install Super User or something which seemed like an easy way to root so I said yes. The problem is, the phone never loads. I left it for a good 2 hours to do the factory reset, then it seemed it was not doing anything so I restarted and messed around more. The result is, it is just stuck looking like it's loading up (I assume that's called a bootloop).
So my question is how can I get this phone back into usable condition, I'm not fussed about finishing what I started necessarily, I just need a usable phone. There seems to be good news in that I can access TWRP (v2.8.6.1), which I guess would be useful if I knew how to use it.
Thanks for any help
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=HL1wOPe5pLc