alright heres the situation. im trying to access diagnostic mode on a ppc6600 thats running wm2003. none of the standard ##3424# codes work, HTC even doesnt know how to pull this off.
any of you geniuses got any ideas on how to access diagmode in wm2003?
Related
hey guys..i need som ehelp big time..i been tryin to unlock this sx56 forever..THANK GOD i found this site...i dont have a serial cable but i read somewhere on this forum that u dont need the xdamanipulator to find the sim unlock code..u jus need to get into bootloader and into dualuser and type #AT................ will this work and also how do i enter dualuser in bootloader...i am now in bootloader mode but all i see is WALLABY bootloader and at the bottom says GSM ok..but how do i get into dualuser...also i been playin with the bootloader and when i power it off and back on it says fatal error : NETTGAIN.exe is corrupted or something like that...all i did was play with the GSM option in the bootloader and and resetted it to ON and also i jus did all the diagnostic test...did i do somethin wrong to cause this fatal error?? someone please help me..im desperate. Thanks in advance.
dualuser mode is done by, using a serial cable and Hyper terminel.
So you allways need an serial cable.
ok thanx TUX2K..i will go by a serial cable....hope it works... :wink:
Hi Xda Developers i have a T-Mobile Pocket PC Phone Edition and i need to unlock the phone so i can use it back home in the Middile East and here is the information about the phone
Rom Version : 3.08.10 ENG
Radio Version: 6.02
Wallaby Bootloader 5.15
and i'm working on getting the serial cable from the website
http://datanywhere.net/Merchant2/merchant.mv?Screen=CTGY&Store_Code=DI&Category_Code=XDCCR
but i found there two types of serial cables
1-Serial AutoSync Cable for T-Mobile/O2 XDA Pocket PC Phone
2-RS-232 Serial Comm cable for PocketPC Phone
which one do i order for my device and would be appropriate and if i got everything needed would it work for that device and unlock my phone so i can use another SIM Card other than T-Mobile SIM Card
Can you please help me XDA Developers and thanks again for that Program and for the hard work.
I forgot to add that my country GSM network is 900Mhz and my device is 1900/900 Mhz so is it gonna work over there?
I can add that the Serial Cable on T-mobiles site worked fine for me, and I have the same settings as you on my XDA. All you have to do is just follow the simple instructions under the program download area and it takes like less than a minute. And yes thanks Guys, this program is great and really something to help us all Muc love to you all. lol
install everthing
installed evrything went on great looks great but it is still locked did the unlock program u have error getting unlock code please help everything else is sweet
hello,I'm from china.and I get wp7 phone HTC 7 Surround.It's a phone for test.and I try to Switch USBMode to zune mode,it does't work..It only can work on Diag mode..so,someone can help me? The DIag mode Driver can’t find.It seems to unlock for developer？
look the picture...HELP...
understand me? sorry for my poor english
Now it does't connect to pc from zune
MY MSN:[email protected]
how did u enter USBMode ?
There is a program in phone, USBModeWitch, you can find it from my picture
Is this some sort of test device? As i noticed its also security unlocked
I have 2 devices，if you need.contact me. MSN:[email protected]
YES,it is unlock....
how did u get it to be security unlocked ?
He has a pre-release phone, it came with a custom firmware that has those tools pre-installed.
YuLong, have you tried rebooting the phone (remove the battery, etc)?
If that doesn't work, have you tried connecting it to a different computer with just the Zune software? It might work.
he shuld prob contact some Devs in this forum and get his ROM dumped or backed up somehow, it may be usefull for Jailbreaking or something....
Please post your device specific questions in the proper forums!
~~Tito~~
yulong256 said:
There is a program in phone, USBModeWitch, you can find it from my picture
Click to expand...
Click to collapse
that's a test rom, not a shipping ROM, so none of us will see that.
I need a htc surround rom desperately as i made the great mistake of purchasing a likely stolen store display model. its main account is set to [email protected] and keeps popping up with fake texts and refilling the contacts with fake contacts. my battery dies fast. Im sure im not the first to ask for a rom, but lord knows i need one.
need DIag mode Driver.Thanks
Can anyone tell me that HTC Sapphire (or Nexus one) have QC Diagnostic mode or not?
I am struggling since a month but no luck...
Please help!!!
Thanks
SD
sarvadaman.singh said:
Can anyone tell me that HTC Sapphire (or Nexus one) have QC Diagnostic mode or not?
I am struggling since a month but no luck...
Please help!!!
Thanks
SD
Click to expand...
Click to collapse
Try this:
*#*#4636#*#*
More codes here
http://www.askvg.com/google-android-hidden-secret-codes/
Thanks for your reply.
I already tried but that is not what I am looking for
Actually once the will be Qualcomm diagnostic mode it will detect as com port (serial connection) over USB and we can connect that with PSAS or QPST.
on other HTC's CDMA set secret codee for this is ##3424# or ##DIAG#, but it is not working nexus or sapphire.
Check this out!
You may want to take a look at my post. This will virtually work with any device who's kernel source is released . http://forum.xda-developers.com/showthread.php?t=948360
Hi all,
I've been in a trouble that never been before. And after several tries, lots of google, I have to ask for help
I've got a Desire HD locked to Softbank Japan (001HT) comes with v2.37.726.2 with S-ON and can NOT access to any menu except emergency call.
So I can't enable USB Debugging, can't flash to another version although I have goldcard already (Main version is older! problem).
Phone can go to recovery, fastboot can see phone, but ADB NOT.
Tried all mode recovery, hboot usb, normal mode (only emergency call) and HTC original upgrade tools can't connect to phone as well.
So, the situation is: can't enable USB Debugging, phone not allow to flash to any older version, can't ADB. ONLY HBoot usb fastboot can see phone.
Anyone have experience with this before?
Willing to donated some $$$ if can help me out.
Thank you
You cannot downgrade that build, because HTC added some new security measures. Sorry, but you are stuck before someone finds a new way to downgrade.
That's sad Any chances to flash to higher version or whatever so at least I can use the phone as a PDA?
Just to give it a bump.
Any way to by pass that emergency call only so I can use it as a PDA?
Found those:
PD98IMG_Ace_Gingerbread_S_Orange_ES_2.37.75.8_Radio_12.54.60.25_26.09.04.11_M2_release_194089_signed
and some TMO_UK TMO_AT with 2.37.11x.x
will give them a try
Update:
PD98IMG_Ace_Gingerbread_S_TMO_UK_2.37.110.5_Radio_12.54.60.25_26.09.04.11_M2_release_189654_signed
This file works. Although there is no solution to downgrade 2.37, but at least it can by pass that stupid emergency dial only and allow to input unlock code / or use it as a PDA
secany said:
Hi all,
I've been in a trouble that never been before. And after several tries, lots of google, I have to ask for help
I've got a Desire HD locked to Softbank Japan (001HT) comes with v2.37.726.2 with S-ON and can NOT access to any menu except emergency call.
So I can't enable USB Debugging, can't flash to another version although I have goldcard already (Main version is older! problem).
Phone can go to recovery, fastboot can see phone, but ADB NOT.
Tried all mode recovery, hboot usb, normal mode (only emergency call) and HTC original upgrade tools can't connect to phone as well.
So, the situation is: can't enable USB Debugging, phone not allow to flash to any older version, can't ADB. ONLY HBoot usb fastboot can see phone.
Anyone have experience with this before?
Willing to donated some $$$ if can help me out.
Thank you
Click to expand...
Click to collapse
What did you do to get into this trouble?
I was thinking of trying to downgrade my Softbank 001HT so I can root it again.. but maybe not if this is the result??
kiwiandy said:
What did you do to get into this trouble?
I was thinking of trying to downgrade my Softbank 001HT so I can root it again.. but maybe not if this is the result??
Click to expand...
Click to collapse
my phone just came back from repair with this version replacing my root. is there a fix yet?
Please give me the link
secany said:
Found those:
PD98IMG_Ace_Gingerbread_S_Orange_ES_2.37.75.8_Radio_12.54.60.25_26.09.04.11_M2_release_194089_signed
and some TMO_UK TMO_AT with 2.37.11x.x
will give them a try
Click to expand...
Click to collapse
Hello,
please give me the link for this dowload , i want to load and want to unlock
Thanks'
sathish.sa said:
Hello,
please give me the link for this dowload , i want to load and want to unlock
Thanks'
Click to expand...
Click to collapse
Do you have a SoftBank 001HT?
Settings - System - About Phone:
What build is it, Kernel etc. ?
Hello!
secany said:
I've got a Desire HD locked to Softbank Japan (001HT) comes with v2.37.726.2 with S-ON and can NOT access to any menu except emergency call.
So I can't enable USB Debugging, can't flash to another version although I have goldcard already (Main version is older! problem).
Anyone have experience with this before?
Willing to donated some $$$ if can help me out.
Click to expand...
Click to collapse
This Japanese phone need special way to enter the Airplane mode without the SIM card. I translate from a Japanese site:
1. Slide down to enter Emergency call interface.
2. Put and hold the Power button for few seconds, a dialog will appear, select Airplane mode
3. Touch the Home button
4. Now you can use the phone, change the settings, root, and unlock it
Hi,
@Tudo: Thanks for the info.
Question: I put my phone into airplane mode and was able to access a screen where I could read "Sim network subset unlock pin".
So I got an HTC unlock code from a trusted website. After I input the code, it said: "Invalid password"; and my phone still is sim-locked. Am I doing something wrong? Does "sim network subset unlock pin" mean the same as "sim unlock code"? I'm lost here...
Hope someone can advise me...;-)