I have searched and wasn't able to find my answer, can someone answer my question? I was wondering when I get my new 32gb sd card how do i setup the card to run on my phone? I am currently rooted running CM6. Do i just copy the files from one card to the new one?
i2ichal2d said:
I have searched and wasn't able to find my answer, can someone answer my question? I was wondering when I get my new 32gb sd card how do i setup the card to run on my phone? I am currently rooted running CM6. Do i just copy the files from one card to the new one?
Click to expand...
Click to collapse
that should work fine
First, backup everything from existing card. then format new card thru pc. then install card to phone and reformat on the phone itself and reboot. once that's done, transfer back all your files to new card. all will be good. Android need to format cards thru their OS. when you reboot you'll see folders on your new card that got installed from the format and reboot of OS.
Related
I picked up an 8GB SD micro to upgrade the stock 2GB. What's the easiest/best way to upgrade it without messing up the various applications that are using it? Can I just drag-and-drop from the phone over USB to the new card in a reader, then swap? Or are there partitions, etc to worry about. I'm not using apps2sd or anything special currently.
there shouldn't be any partitions. i believe if you just copy/paste everything over, it should be fine.
Thanks, seems to work well.
I decided to first format the card in the Aria, then drag over the files and swap:
Menu->SD card->Unmount
Remove original card, insert new one
Menu->SD card->Format
Remove new card, insert original one
Attach USB, go into disk mode
New card in PC
Drag and drop all but .android_secure and LOST.DIR (which were created by format)
Eject, unmount, etc
Swap cards
Good to go!
well done.
I am receiving my Aria this week and want to immediately swap out the 2gig card for a 16gig card I own. Can I do this before I even power up the phone for the first time? Is there anything on the 2gig card that the first boot needs?
SD Card upgrade
mattbollenbach said:
there shouldn't be any partitions. i believe if you just copy/paste everything over, it should be fine.
Click to expand...
Click to collapse
Will this work if the SD Card has partitions? I want to upgrade to a larger card. I want to make sure all apps move and work properly.
Can you change the SD Card in WP7 from a 4GB card to an 8GB or 16GB card without reformating the Phone.
Thanks
michaels0007 said:
Can you change the SD Card in WP7 from a 4GB card to an 8GB or 16GB card without reformating the Phone.
Thanks
Click to expand...
Click to collapse
You can change it, but you'll lose everything you've installed and have an out the box phone so to speak.
Well at least that's what happened when I changed from my test SD card to my 8GB
Which Brand memory card do u use?
Hawkeyezghost said:
Which Brand memory card do u use?
Click to expand...
Click to collapse
I use SanDisk
no!!!will not read the new sd,you have to format the new one with the rom you are installing.
N.B: sandisk 8G is highly stable with wp7...
you can switch sd cards without starting over, but then you'd have to copy the partition from your old sd card to your new sd card.
it gets slightly complicated, but only because of the numbers of steps, not technical complications.
use Easeus partition software and try to replicate the exact partitions across the old card and the new card
good luck
bravo261 said:
you can switch sd cards without starting over, but then you'd have to copy the partition from your old sd card to your new sd card.
it gets slightly complicated, but only because of the numbers of steps, not technical complications.
use Easeus partition software and try to replicate the exact partitions across the old card and the new card
good luck
Click to expand...
Click to collapse
Did this work for you? I made a thread about this possibility but nobody knew if it's really working.
Hey there,
my question is the other way. Is it possible to flash an other rom without having my SD in to safe settings and installed apps?
I tested this way:
1. turn off phone
2. pull out the SD
3. boot
My HD2 booted into WP7 and ran a blank WP7 such as it was fresh installed.
Then I turned it off and put the SD back in and booted. It booted into my ol status.
So no I want to if I can flash an other rom, put my already formatted SD with my WP7 settings back in? Is that maybe the best way to safe settings?
olegblochin said:
Hey there,
my question is the other way. Is it possible to flash an other rom without having my SD in to safe settings and installed apps?
I tested this way:
1. turn off phone
2. pull out the SD
3. boot
My HD2 booted into WP7 and ran a blank WP7 such as it was fresh installed.
Then I turned it off and put the SD back in and booted. It booted into my ol status.
So no I want to if I can flash an other rom, put my already formatted SD with my WP7 settings back in? Is that maybe the best way to safe settings?
Click to expand...
Click to collapse
i would test this for you and reply you!!! i didn't think of that before...
michaels0007 said:
Can you change the SD Card in WP7 from a 4GB card to an 8GB or 16GB card without reformating the Phone.
Thanks
Click to expand...
Click to collapse
i think this link will explain you how to copy the partitions....and more
http://www.techienote.com/tag/technology
Thanks jianototi,
copying the wp7 partition between different sd cards works very well. The system accepts the copy and wp7 launches with all adjustments, downloads and installed apps.
My question now is: Can I reinstall a fresh wp7 nand and insert my sd from old installation? Will the sd be accepted? Or start wp7 with a virgin system?
regards
caiowa
so if we can move a wp7 from one sd card to another. Should it then not be possible to download from the internet, and just copy to sd-card?
Reason i ask is because i cannot get my wp7 to connnect to pc, so i cant get live services. However there seems to be a version now, where i just need to activate the phone.
If someone uploaded their data, can i download it, and update my wp7 that way?
yes put the new sdcard and restar to factory values
Bareslehm said:
so if we can move a wp7 from one sd card to another. Should it then not be possible to download from the internet, and just copy to sd-card?
Reason i ask is because i cannot get my wp7 to connnect to pc, so i cant get live services. However there seems to be a version now, where i just need to activate the phone.
If someone uploaded their data, can i download it, and update my wp7 that way?
Click to expand...
Click to collapse
i was under the impression that it uses some sort of RAID over the card.
the best way to tell is to copy the card factory rest with one SD card, then swap the cards afterwards. Myguess is that it wont work the way you want it too, i doubt it will "give" you everything back on again.
How can this be done?
I have a class 2 sandisc which I consider slow... I have a class 6 on the way but already setup wp7 the way I like it... Is it a matter of simply swapping cards and resyncing zune? Or will there be apps on the card?
From what I understand the SD card is formatted and prepared in such a way that the SD Card becomes part of the main storage so if you change SD cards it will be as though you have a brand new WP7 install...
Stupid question. But if I swap out cards to a faster, better quality card and start from scratch, would I need to buy all my apps again or will it recognise I have purchased it before like the old marketplace?
As long as you use the same account details all will be well. The apps are linked with your account, not a specific installation.
I used Minitool Partition manager to copy my partitions from my old SD card to the new one. Worked like a charm. Everything (settings and apps) was intact.
Cheers for that, downloaded and installed... I'll give it a whirl when my card comes in the mail...
washpota said:
I used Minitool Partition manager to copy my partitions from my old SD card to the new one. Worked like a charm. Everything (settings and apps) was intact.
Click to expand...
Click to collapse
REALLY!? that will work? Now what if like in my case, I just installed a NAND Android ROM, but used a different SD Card. When I re-install WP7 when Nodo comes out, can I just install WP7 w/o the SD Card in place then put it in on reboot and all my stuff will be there?
I know probably a long shot, but would like to try or know if anyone has tried.
[email protected] said:
REALLY!? that will work? Now what if like in my case, I just installed a NAND Android ROM, but used a different SD Card. When I re-install WP7 when Nodo comes out, can I just install WP7 w/o the SD Card in place then put it in on reboot and all my stuff will be there?
I know probably a long shot, but would like to try or know if anyone has tried.
Click to expand...
Click to collapse
There is a difference between your case and the OP's case. In the OP's case, the ROM knows the old SD card's config (partitions, files etc), so it would work fine as long as the new SD card also has the same partition layout and files. In your case, after re-install, it is a new ROM, so he would repartition the SD card.
I had tried to use a copied card after a ROM reset, but it re-created the partitions. So a ROM reinstall should behave similar. Anyway, it is worth giving a try.
Sorry, but another basic question which I've searched for the answer but can't find an answer that makes sense to me.
I have an x8 running on Gingerdx v010. Runs great.
I have just been given a 8gb Micro SD Card, Class 10.
What's the best way to go about swapping the stock sd card with this new one - do i just copy and paste all off the old sd card onto my desktop, and then copy all that back to the new sd card?
Or do I need to partition the card in any special way?
I'm a beginner at this, so please don't get too technical!
I'd like to put some music on the new card, and I reckon i've got a few GB of albums etc to put on it. also, will probably try to put as much as possible on it to make sure there's plenty of available RAM in the internal memory.
Thanks in anticipation of your help.
This is a really useful site - glad I found it.
Impster
bump... anyone?
Backup copy/move all the files in old sdcard to PC. Insert your new sdcard and boot, enter CWM>advanced option>partition sdcard>select 512mb>then zero swap. reboot. Then copy/move ur files to new sdcard You can also partition using windows You just need partition if you are installing many apps like me
Partitioning is not required, just copy data over from old card to new card.
hello everyone, i backed up my files using the CWM recovery, this may seem like a simple question (im a noob) but where do the backed up files go? i do not see them on my sd card or on the nook (built in memory) can i delete the backed up files? or get to them? Also a member here told me to buy 2 sd cards is a good idea, one with all the info and the other empty for apps and music so i can keep the sd card in the nook without it going to CWM everytime i boot, but if i buy a new sd card do i need to format it? or just use it out of the box and into the nook, will my apps still work since the new sd card is empty and my files?
Android311 said:
hello everyone, i backed up my files using the CWM recovery, this may seem like a simple question (im a noob) but where do the backed up files go? i do not see them on my sd card or on the nook (built in memory) can i delete the backed up files? or get to them? Also a member here told me to buy 2 sd cards is a good idea, one with all the info and the other empty for apps and music so i can keep the sd card in the nook without it going to CWM everytime i boot, but if i buy a new sd card do i need to format it? or just use it out of the box and into the nook, will my apps still work since the new sd card is empty and my files?
Click to expand...
Click to collapse
Always format new cards. And never use Windows format. Use this. A freebie. Windows format can corrupt uSD.
Your nandroid (CWM) backup will be in the Backup folder in the ClockworkMod folder. It should be on your uSD.
One uSD is enough as long as it's large enough to hold all you want to use. I've always used at least a 16Gb card. Always name brand (SanDisk). You really don't want to swap back and forth. As long as your nandroind is on removable memory you should be safe. Some people copy their nandroind backups to their desktop computers for safe-keeping. A bit OCD but not really a bad idea.
Ok very good info! But I use the nook color and I do not think I need to format the sd card?
HTC Wildfire S (VM) "s-off" "rooted" Stock Rom
If you use the uSD as flashable CwMR, then you wouldn't want to reformat the card, otherwise, you have to recreate it once again if you want to do a backup or install.
what i mean is my new sd card do i put it in my nook and format it thru cyannogen mod setting? says umount and format sd card, cause if i put the same CWM on the new sd card everytime i boot it will take me to cwm
Android311 said:
what i mean is my new sd card do i put it in my nook and format it thru cyannogen mod setting? says umount and format sd card, cause if i put the same CWM on the new sd card everytime i boot it will take me to cwm
Click to expand...
Click to collapse
Others have formatted their uSD cards in their NC's but as a general rule I don't. I know I sound like a one-trick pony but one needs to start with a good formatted card otherwise everything else is for naught.
The reason I ask is because I don't want to keep pulling out my SD card everytime I turn my nook on, so if I were to format the new SD card how would I do it?
HTC Wildfire S (VM) "s-off" "rooted" Stock Rom
Either you confuse about CwM uSD or I (we) do not fully understand your issue.
1. If your uSD is a flashable CwM Recovery then it WILL BOOT into CwM Recover EVERY TIME you boot up with that uSD card plugged in. That's the way it is
2. If your uSD is for normal usage, you should NOT have any problem leaving the uSD card in the NC when booting up.
sorry i should have better explained, ok i get it now, my question in simple form is do i have to format the new sd or just simply pop it in the nook and go