Hello everyone,
I have seen a number of different posts about the best settings to encode videos for the Droid X, and I have found a method that I am extremely happy with. I use these settings to encode HD MKV files for playback on the Droid X. These encodings play without a hitch, and only suffer slight sync issues that occur when changing volume, and skipping forwards/backwards into the video. This is not a huge problem, as the sync issues only last for 1-2 seconds maximum. I have tested a large variety of Video players, and I have found that RockPlayer offers the smoothest playback available (in my experience). These settings will also work for many other file types, just make sure your Source resolution is higher than that of your output and you will be pleased!
Software Required: MediaCoder (Free, can be downloaded HERE)
Settings
Video Tab:
Format: H.264
Mode: Constant Bitrate (1400)
Source: Auto Select
Encoder: Auto Select (If your video card supports CUDA, select CUDA Encoder for faster encoding).
x264 Tab (On the right when selecting the Video Tab):
Profile: Baseline (This is extremely important!)
Sound Tab:
Encoder: FAAC
Format: LC-AAC
Average Bitrate: 160
MPEG Version: MPEG4
Container: AAC
Container Tab:
Container: MP4
Picture Tab:
Resize: 848x480
Aspect Ratio: Keep Display AR
Crop: Disabled
Frame Rate: 25
Effects: Filter by Encoder
I hope these settings will come in handy for others. I have spent a lot of time testing different settings and Encoders, but I can honestly say I have gotten the best results using these!
Let me know how these settings work for you, I hope some of you can help me find a video player that will not show any issues when changing volume and skipping forward/backwards through videos.
Well, I think there is way to record an 16:9 video size (in iPhone 3GS can record HD if you want). no problem I don't need HD, but can't we record as 16:9 video size?
Because as you see as in HTC HD Mini has only 4:3 video sizes, let the resolution be lower but record as 16:9 size.
I need this for viewing on 16:9 TVs, and not having always problems about stretch it or looks like fat humans
Thanks
Well,does it make pancakes?(my oven does if you want) )))))))))))))
once you asked to view HD videos,now you want 16:9 video recording.........
dudeeeeeeeeeeee this is a phoneee,not a desktop,laptop or HD video camera!!!
p.s even some old desktops/laptops will not play HD videos lol
tzacapaca,
I don't mean HD! and I don't mean record HD high resolution 16:9 !.
I mean 16:9 size at LOW resolution that can fit TV without any effect of fat
for example: the phone has 640x480 and lower (and it's all 4:3) and I mean here can't we record as 640x360? (and this will be as 16:9) or let be lower, ex: 520x240.
I said again I don't mean HD (1280x720 and it's 16:9) I know the phone hasn't enough power.
I mean Record Wide video (16:9) at low resolution
You can record at 640x480 and then crop.
NitroNitrous said:
You can record at 640x480 and then crop.
Click to expand...
Click to collapse
I Can't Crop always the videos!
isn't there to switch as 640x360? custom?
is that SO Hard that we can't change resolution Camera in WindowsMobile?
Cropping thingy..
As of the moment, I do cropping of my videos to make it widescreen (16:9). I cant find any apps that will automatically record videos using that ratio. I used VirtualDub to do the cropping of the height to make it widescreen..
Heres my calculation:
640*480 (original)
16:9 = 640:(?)
640 * 9 ÷ 16 = 360 (the final height)
16:9 = 640:(360)
480(original) - 360(calculation) = 120 (height to be cropped)
120 ÷ 2 = 60
Crop (Top and Bottom): 60
I think it was mentioned above. I just expanded it.
1-Download and open VirtualDub
2-Drag and drop the recorded video into the app
3-Press Ctrl+F from the keyboard (this will open Filters)
4-Click "Add...". Scroll down then select "null transform" and hit OK
5-Click "Cropping" then input 60 on Y1 and Y2 offset and hit OK below. Hit OK again.
6-Press F7 on the keyboard to save your work as an AVI
I hope I helped - Anric Capa Urmeneta
Thanks uanric,
but what I was need is automatically record at 640x360 and without needing to crop after recording.
And I want that on Android, WindowsMobile is dead.
but I think I will fix that for next years on Android of course!
I'm wanting to put a few videos on for my sons, I cannot get the audio codec right, so far I've tried ac3 and aac in mp4 container with avc video, the video plays back fine but never plays audio. Tried a couple of different players (dice player just force closes) but they part without audio too. Any one know what audio codec the default video player accepts?
I can stream from my pc using plex and it works fine but would rather play from local sd card
Sent from my LG-P920 using XDA App
Have you tried Mobo Player? Works fine for me and i play all types, mkv, avi, mp4
Plus they have lots of codec packages to add if havng any trouble,
Worth a try.
foxguard said:
Have you tried Mobo Player? Works fine for me and i play all types, mkv, avi, mp4
Plus they have lots of codec packages to add if havng any trouble,
Worth a try.
Click to expand...
Click to collapse
Thank you for the suggestion! I have been wondering the same.
I wish there was a simple way to side-load codecs onto Android so the default video player supports more
Sent from my VegaComb using Tapatalk
No probs.
Let me know how you get on.
Try this from modaco.
Afternoon all
As mentioned in a few threads, I've been tinkering with encoding settings in Handbrake in order to get the optimal settings for converting video. After spending a few hours with this last night and this morning - what a fun Friday night, huh? - I think I have nailed it. This profile will allow you to watch files using the native video player - you don't need anything like RockPlayer, or VPlayer. This means that they should be hardware accelerated. You can use something like RockPlayer, but framerates will suffer if you're using HD videos. I tested this using the 1080p MP4 version of Big Buck Bunny as the input file and it works very well - I'm going to give this a shot on some of my other videos today.
I have attached the profile in question.
EDIT: Rename the file to "Vega.plist" before importing (take off the .txt extension) - I've only just realised that modaco will not let me upload PLIST files...
Don't try to double click this, as it might try to open in Quicktime - no idea what it will do on a Mac! To import it open Handbrake, go to "Presets" and click "Import". The profile export feature is experimental, so I'll list the detailed settings that I used in case it does not work.
Firstly though, if you're not sure what you're doing in the "Picture" tab, have a read of this quick primer on Anamorphic video. If you want to scale down a 720p or 1080p video to match the Vega's resolution, set Anamorphic to loose, modulus to 16, and set the video width to 1024. For any videos that are not HD, or if you're not sure, just set this to "Strict": this will make sure that the video always displays in the correct aspect ratio, but you won't be able to scale the video down. Don't mess with the "Cropping" settings unless you know what you're doing.
I'd highly recommend scaling 720p or 1080p HD videos down to match the Vega's resolution - it drastically reduces the output size:
The original version of Big Buck Bunny (1920*1080): 885MB
Strict anamorphic - no scaling (1920*1080): 388MB
Scaled down to 1024*576 with loose anamorphic: 128MB
The Vega will play 720 or 1080 files, but you won't see that extra detail so there's no point in wasting the extra space on your SD card, IMO.
Detailed settings - in case the attachment fails. If anyone finds any optimisations for this, please let me know!
Output Settings:
Container: MP4 File
Large file size: Unchecked
Web optimised: Unchecked
iPod 5G support: Checked
Video Filters Tab:
Detelecine: Default
Decomb: Default
Deinterlace: Off
Denoise: Off
Deblock: Off
Grayscale Encoding: Off (Unchecked)
Video Tab:
Video Codec: H.264 (x264)
Framerate: Same as source
Quality: Constant Quality, set slider to RF:20
Audio Tab:
This is going to vary, depending on the audio tracks in the source video (for example, a DVD may have multiple languages and each of these will be a different audio track) - I have not yet tested multiple audio channels on the Vega, so I highly recommend only adding one audio track to your output file. The following drop-downs must be set:
Audio Codec: AAC (faac)
Mixdown: Stereo (no point having multi-channel audio if you can't play it on the Vega)
Samplerate: Auto
Bitrate: 160
Subtitles:
This will depend entirely on whether you want to include the subtitles from the source video. This can get a bit more complicated, so I'm not going to cover it here; if your source has subtitles as a separate track (i.e., soft subs not hard subs), you may need to take some extra steps - do some research on this over at afterdawn.com or doom9.org.
Chapters:
If your source video has chapters - like a DVD - you can replicate those chapters in the output video; if there are no chapter markers in the source, the checkbox is greyed out.
Advanced:
There's quite a lot in here, so bear with me...
Reference Frames: Default (3)
Maximum B-Frames: Default (3)
CABAC Entropy Encoding: Checked
8x8 Transform: Checked
Weighted P-Frames: Unchecked
Pyramidal B-Frames: Default (Normal)
No DCT-Decimate: Unchecked
Adaptive B-Frames: Optimal
Adaptive Direct Mode: Default (Spatial)
Motion Estimation Method: Default (Hexagon)
Subpixel ME & Mode Decision: Default (7)
Adaptive Quantisation Strength: slider set to middle
Psychovisual Rate Distortion: slider set to middle
Psychovisual Trellis: slider set fully to the left
Partition Type: Default
Trellis: Default
Deblocking: Both drop-downs set to Default (0)
For those that are interested in the more nerdy side, I started off by copying Handbrake's built in "High Profile" x264 settings. I found this page, which mentions that the Xoom only supports the baseline x264 profile, so I turned off the advanced x264 stuff. However I realised that even though the hardware is the same, the Xoom is not the Vega. So started re-enabling the advanced options one by one to see if any caused a problem. The only one I found that caused any issue was weighted P-Frames, which seemed to make videos judder slightly.
Attached File(s)
Vega.plist.txt (3.52K)
Number of downloads: 521
This post has been edited by blcollier: 26 March 2011 - 01:44 PM
Cheers but I shouldn't have to convert for my Optimus 3D as well as the Vega, one video should be able to work on both
kenfisher said:
Afternoon all
As mentioned in a few threads, I've been tinkering with encoding settings in Handbrake in order to get the optimal settings for converting video. After spending a few hours with this last night and this morning - what a fun Friday night, huh? - I think I have nailed it. This profile will allow you to watch files using the native video player - you don't need anything like RockPlayer, or VPlayer. This means that they should be hardware accelerated. You can use something like RockPlayer, but framerates will suffer if you're using HD videos. I tested this using the 1080p MP4 version of Big Buck Bunny as the input file and it works very well - I'm going to give this a shot on some of my other videos today.
I have attached the profile in question.
EDIT: Rename the file to "Vega.plist" before importing (take off the .txt extension) - I've only just realised that modaco will not let me upload PLIST files...
Don't try to double click this, as it might try to open in Quicktime - no idea what it will do on a Mac! To import it open Handbrake, go to "Presets" and click "Import". The profile export feature is experimental, so I'll list the detailed settings that I used in case it does not work.
Firstly though, if you're not sure what you're doing in the "Picture" tab, have a read of this quick primer on Anamorphic video. If you want to scale down a 720p or 1080p video to match the Vega's resolution, set Anamorphic to loose, modulus to 16, and set the video width to 1024. For any videos that are not HD, or if you're not sure, just set this to "Strict": this will make sure that the video always displays in the correct aspect ratio, but you won't be able to scale the video down. Don't mess with the "Cropping" settings unless you know what you're doing.
I'd highly recommend scaling 720p or 1080p HD videos down to match the Vega's resolution - it drastically reduces the output size:
The original version of Big Buck Bunny (1920*1080): 885MB
Strict anamorphic - no scaling (1920*1080): 388MB
Scaled down to 1024*576 with loose anamorphic: 128MB
The Vega will play 720 or 1080 files, but you won't see that extra detail so there's no point in wasting the extra space on your SD card, IMO.
Detailed settings - in case the attachment fails. If anyone finds any optimisations for this, please let me know!
Output Settings:
Container: MP4 File
Large file size: Unchecked
Web optimised: Unchecked
iPod 5G support: Checked
Video Filters Tab:
Detelecine: Default
Decomb: Default
Deinterlace: Off
Denoise: Off
Deblock: Off
Grayscale Encoding: Off (Unchecked)
Video Tab:
Video Codec: H.264 (x264)
Framerate: Same as source
Quality: Constant Quality, set slider to RF:20
Audio Tab:
This is going to vary, depending on the audio tracks in the source video (for example, a DVD may have multiple languages and each of these will be a different audio track) - I have not yet tested multiple audio channels on the Vega, so I highly recommend only adding one audio track to your output file. The following drop-downs must be set:
Audio Codec: AAC (faac)
Mixdown: Stereo (no point having multi-channel audio if you can't play it on the Vega)
Samplerate: Auto
Bitrate: 160
Subtitles:
This will depend entirely on whether you want to include the subtitles from the source video. This can get a bit more complicated, so I'm not going to cover it here; if your source has subtitles as a separate track (i.e., soft subs not hard subs), you may need to take some extra steps - do some research on this over at afterdawn.com or doom9.org.
Chapters:
If your source video has chapters - like a DVD - you can replicate those chapters in the output video; if there are no chapter markers in the source, the checkbox is greyed out.
Advanced:
There's quite a lot in here, so bear with me...
Reference Frames: Default (3)
Maximum B-Frames: Default (3)
CABAC Entropy Encoding: Checked
8x8 Transform: Checked
Weighted P-Frames: Unchecked
Pyramidal B-Frames: Default (Normal)
No DCT-Decimate: Unchecked
Adaptive B-Frames: Optimal
Adaptive Direct Mode: Default (Spatial)
Motion Estimation Method: Default (Hexagon)
Subpixel ME & Mode Decision: Default (7)
Adaptive Quantisation Strength: slider set to middle
Psychovisual Rate Distortion: slider set to middle
Psychovisual Trellis: slider set fully to the left
Partition Type: Default
Trellis: Default
Deblocking: Both drop-downs set to Default (0)
For those that are interested in the more nerdy side, I started off by copying Handbrake's built in "High Profile" x264 settings. I found this page, which mentions that the Xoom only supports the baseline x264 profile, so I turned off the advanced x264 stuff. However I realised that even though the hardware is the same, the Xoom is not the Vega. So started re-enabling the advanced options one by one to see if any caused a problem. The only one I found that caused any issue was weighted P-Frames, which seemed to make videos judder slightly.
Attached File(s)
Vega.plist.txt (3.52K)
Number of downloads: 521
This post has been edited by blcollier: 26 March 2011 - 01:44 PM
Click to expand...
Click to collapse
Short videos do not change the resolution. If you set to 4k or 720p, you will continue shooting in 1080p.
If you go in the video option and turn on 1080p / 60fps, it will hold. But if you enable slowmotion or timelapse, the setting in normal mode will return to 1080p / 30fps.
Hi,
I have tried everything to activate the HDR10+ in camera settings - but it's just disabled.
I have changed tried all resolution settings in rear camera, including UHD 3840x2160 (30 fps) - but the option remains greyed out / locked to disabled.
Anyone?
Thanks,
Inc
You need to enable saving the video in raw, and also to enable 16:9 UHD 3840x2160 analysis for the video recording.
NOT the 60 frames per second option.
Also the the High Efficiency Video option should NOT be enabled.
madvinegar said:
You need to enable saving the video in raw, and also to enable 16:9 UHD 3840x2160 analysis for the video recording.
NOT the 60 frames per second option.
Click to expand...
Click to collapse
I have set it to 16:9 UHD 3840x2160 (without 60fps). Where do I set the raw-mode?
Thanks
Inc
Okay, I tried everything, including restart of phone; nothing helped.
Finally I did a reset to default camera app, and then it finally allowed me to activate HDR10+.
Thanks,
Inc