Malfunctioning home button, missing lock screen? - G1 General

Ever since I dropped my phone a few days ago my home button has stopped working, sort of. If I reboot my phone holding home and back, it goes to recovery. If I click the home button while the button backlights are off, it turns them on. If the device is sleeping, it wakes it. The home button doesn't do anything else. If I want to exit say, the browser, I have to click back until I get back home (really annoying). I can't longpress it to get to recent apps. I have a feeling that something might have gotten disconnected when I dropped it, so the I'm guessing the only permanent fix to that would be to disassemble the entire phone as replace/reconnect whatever is missing. What's weird though is that the button still registers occasionally on logcat but it never does what it's supposed to.
Also, my lockscreen is gone. As in, the device will go to sleep, and as soon as I press the button it will turn on, completely skipping my lockscreen. I have a feeling that these two problems might be related. The problems both happened on the latest cm nightly and on an old nandroid I had of chromatic 3.9.1. For now, I will just have to remap the camara key as my home button and use lockbot. I hate how school has taken away most of my free time, so I can't just mess with it till I fix it like I used to before. Tomorrow when I have more time I'm going to try a full wipe and flash of a clean rom (maybe donut lol), a radio reflash, smacking the phone around a little, maybe a few or things. Any other suggestions?

Related

phone is on but wont 'wake up'

when you press the hangup button it will turn the screen off, and may or may not lock it..
but i been having problems with it not waking back up the keys at the bottom will light up and not htc sense menu shows...
is it ust me? whats wrong with it? i paid 495£ for this phone an only got it on the 24th Decemeber??
I don't know what to do i tried rebotting etc etc...
Martyn,
Read this thread end-to-end...http://forum.xda-developers.com/showthread.php?t=596484&highlight=beards
WB
Doesnt seem to be the same, sometimes if i hold the power button, and then push windows button it will randomy work, and its still on as the keyboard lights react to button pressing....
Personally I would give it a go. If it doesn't work then you can assume that its something else, maybe a hardware failure.
What software have you loaded on recently? How much memory have you got free at the moment? If you have a load of software loaded up are they all loaded onto the device memory or the external card? Are you sure you don't have a software conflict going on?
As you can see there are many factors that could be in play here. Notification queue lockups are a biggie. If you eliminate this from the equation then you can start to eliminate the others from it too.
Hope this helps.
WB
I've had this problem a few times, and I do only mean about 3 times since I got the phone, so I don't sweat over it.
I've had to pop the battery out each time except once, where a long-press on the power/end-call button brought the display on.
I'm guessing it's nothing to really worry about, unless of course it happens a lot.

[Q] Touchscreen works only until screen is turned off for first time

Hello all,
I have a problem with my HD2's touchscreen. I've had the phone for awhile now and never had any problems. I've been using android from Sd for awhie and recently switched to NAND android.
I go to bed with a working phone and when I wake up, the touchscreen doesn't work. After trying to use it all day, it occasionly works. When I receive a call or text, the screen works just fine. I am abe to use it until the screen turns off then no more. This happens for each call or text. It also works just fine at first boot(until the screen is turned off.
Thinking that this was a software problem, I tried flashing different android builds, with the EXACT same results. I then wondered if it was a problem with MAGLDER, so I flashed back to a STOCK TMOUS rom, and stock SP, radio etc.
Even after going back to COMPLETELY stock, it now does the same thing in WINMO. Works just find at first boot until screen goes off, and works when I get calls and texts.
I'm now thinking that this is a hardware/digitizer problem, it just seems weird to me that it works 100% until the screen goes off and then not at all.
Anybody have any idea's or insights?
Thanks!
i've read a few similar threads (please search for them!) that indicate one possible cause...
your buttons strips at the bottom may be messing with the touch screen connections. i remember reading in one thread that the dude found a strong relationship between use of the on/off/endcall button and touchscreen failures.
you say it works...:
1. ...until the screen powers off
2. also works when you get an sms or call
in case (1), you have to press the endcall button to "wake" the device...so maybe the button puts just enough pressure to screw up the screen.
in case (2), the device wakes up automatically, so you never pressed the button that might cause the screen to screw up.
try to narrow it down like i've described. maybe your buttons are causing the problem. good luck!
Thanks for replying!
I did see the thread you were talking about though it did not seem to match my problems. However, today as I was working and pulling my phone out, It has started to look like that is the case. As of this afternoon, as long as I press any of the buttons other then the power/end call button to turn on the screen, the tuchscreen works just fine. When waking up the screen with the power/end call button, it does not work at all.
Yesterday and this morning, it didn't matter what button I pushed to wake up the screen, it was totally unresponsive.
So it looks like using the power/end cal button presses on my digitizer and causes problems.
And it's back to not working at all when I use any of the buttons, lol. Guess it's time to start looking into a new digitizer.

The Infamous Unresponsive Digitizier Screen Possibly Solved!

Okay I wasnt going to post about this cause there have been way too many posts and alot of back and forth and debates and even flaming, but I stumbled across something that I think is the cause for MAJORITY of the issues with why we keep having this happen. It Happened to me Today, and I Found the cause.
Before ANYONE Flames me for bringing this up, READ the post, Remember I solved the cause of why it happens to most of us, I dont take responsibility if you choose to take it upon yourself to fix it! And I know 90% of the users are going to tell me I'm wrong or I dont know what I am talking about, so be it.
If you have nothing to add other then flaming the post, just hit the back button and be on your merry way and pretend you never saw it. But I am 98% sure I am right about why its happening!
So if your interested read on:
I actually for the first time had this, and I know this is going to get flamed but its not the Screen thats the problem. And I think (BIG IF) that the dreaded unresponsive screen issue that we keep reading about Majority of them I think is not the screen.
I have 2 HD2s and both have worked flawlessly without any problems, but today I was playing with my test phone that doesnt get used that much and I noticed after installing a new rom that my screen after I played with it for a bit went black (sleep) and when I woke it up it wouldnt respond, first thing that crossed my mind is I just lost my digitizier, and started wondering okay why, I went as far to re-flash WinMo stock HD2 rom, same issue, so I decided its time to find out exactly whats causing this, and I found it. I wasnt going to make a post again cause I figured people would be "Not another thread about this" but I know whats causing the screen issue, at least this is my suspicision and I have temporarily fixed mine.
The problem is HARDWARE, The Culprit: THE END KEY (Red Button)! The Answer to "How or Why": The "End" key is used to turn the phone on and off or to put it in sleep mode, it is the most used key out of all 5 keys, it is used probably 7x more then all the rest, Its used for just about everything, now how does this cause the unresponsive screen? Easy, the phone lock or sleep is associated with this key, Its the only way to make the screen go off other then waiting for the time out period. Because by habit we mostly hit the end key to turn the screen off the phone automatically associates this with locking the phone, once that happens the screen becomes unresponsive because of several reasons: 1) The contact under the actual key has dirt which causes the button to stick in the down position, 2) the contact is bent which the "end" key is pressing down on the contact which is making contact with the board and causing it to be unresponsive, 3) The contact is worn. This is the reason why if you press the end key a few times (anywhere between 2-10) and then try the screen responds, this is cause your "unsticking" the key which then lets the screen respond.
Most of us when we hit the end key press to the far right to avoid hitting the back key (The button with the left arrow) which causes the end button to lean toward the right. But you can wake the phone up with the other 4 keys to the lock screen which will allow you to unlock the phone. As a temporary fix for myself, on my test phone I now make sure to press on the left side of the key to prevent this from happening, since its a test phone I'm not worried, but the real solution is to take the phone apart and clean the underside of the end button, and the actual contact with alcohol to remove the build up of dirt and whatever else. And also if the contact frame is bent to GENTLY bend the right side back up alittle to stop it from happening, or sending it to htc and letting them fix it.
We have to RE-TRAIN ourselves to start using the other keys to wake the phone up and not rely on the end key so much.
Hope this helps anyone finally why we have this problem. And if it works for you then hit the Thanks button
I completely agree with you. I've had the "dead digitizer" since December. It was pretty apparent it was a hardware key problem, as I could generally solve the issue by pressing the "Off" button to turn the screen off, and then one of the other keys (usually the back button, but occasionally one of the others) to wake the screen up, and the digitizer would be alive again.
As I am still under warranty, I sent mine off last week, and expect to hear back within a few days. But if I had the confidence to open it myself, I was sure it would be fixed with a good clean.
Anyway, thanks for crystallizing all this into a post. Thanked!
THANK YOU SO MUCH FOR THE INFO. i have had so much trouble with unresponsive screen after installing typhoon 2.6.3 and it from holding down the red button all the time for install and the past millions times for everything else.
Thanks for the heads up
Sent from my HD2 using XDA App
U maybe be right about why this issue happens but if u rely on other key then will also wear out soon ...
What I did is I remapped my volume up n down keys to power and back button which I believe are the most used in android and then found a app to manage my volume in android that way I don't lose my sound on rhw phone
Also I went ahead and got a another app which places virtual buttons on ur screen so u can use then instead of the actual hardware buttons
For button remapping
get the BUTTONREMAPPER for android and for on screen android buttons get BUTTON SAVIOR
hope this helps
Sent from my HTC HD2 using XDA App
Good to know... will now wake my phone up with the green key as its hardly used in Android. Button Savior is a great app, been using it a while now. Took a bit to retrain myself to not use the back key.
Sent from my HD2 using XDA App
i'm going to agree with your hypothesis or at least suspect that dirt is probably a bigger factor than most people think in these cases. i just bought a non-responsive phone today and while i stuck my nail (yes, i should probably clip them) around the edge, in between the screen and housing, i was surprised to see just how much dirt was in between that crack. same with the area around the buttons; there's a lot of grime there.
since i just got the phone i haven't even opened it up but the first thing i'm planning to do is give it a good interior clean around the buttons for sure as that seems to be the sensitive spot. touch screen devices are very delicate and the micro particles of dirt which build up over time probably create a hazard that people really don't really anticipate. compound that with having to mash on those buttons all the time probably crams the debris in there even tighter.
i'll attempt to clean and check the contact as you suggested and will report back if it helped in my case.
About hardware keys:
I don't use them at all, only for wake up the phone (it can be wake up with any key)
There is an app in market called "button saviour" it's just excellent app to keep your hardware keys for a long time
AngelDeath said:
The problem is HARDWARE, The Culprit: THE END KEY (Red Button)! The Answer to "How or Why": The "End" key is used to turn the phone on and off or to put it in sleep mode, it is the most used key out of all 5 keys, it is used probably 7x more then all the rest, Its used for just about everything, now how does this cause the unresponsive screen? Easy, the phone lock or sleep is associated with this key, Its the only way to make the screen go off other then waiting for the time out period. Because by habit we mostly hit the end key to turn the screen off the phone automatically associates this with locking the phone, once that happens the screen becomes unresponsive because of several reasons: 1) The contact under the actual key has dirt which causes the button to stick in the down position, 2) the contact is bent which the "end" key is pressing down on the contact which is making contact with the board and causing it to be unresponsive, 3) The contact is worn. This is the reason why if you press the end key a few times (anywhere between 2-10) and then try the screen responds, this is cause your "unsticking" the key which then lets the screen respond.
Most of us when we hit the end key press to the far right to avoid hitting the back key (The button with the left arrow) which causes the end button to lean toward the right. But you can wake the phone up with the other 4 keys to the lock screen which will allow you to unlock the phone. As a temporary fix for myself, on my test phone I now make sure to press on the left side of the key to prevent this from happening, since its a test phone I'm not worried, but the real solution is to take the phone apart and clean the underside of the end button, and the actual contact with alcohol to remove the build up of dirt and whatever else. And also if the contact frame is bent to GENTLY bend the right side back up alittle to stop it from happening, or sending it to htc and letting them fix it.
We have to RE-TRAIN ourselves to start using the other keys to wake the phone up and not rely on the end key so much.
Hope this helps anyone finally why we have this problem. And if it works for you then hit the Thanks button
Click to expand...
Click to collapse
You just hit d nail on d head pal...My HD2's touchscreen also stopped responding and nothing i did (software-wise) worked...i flashed several WinMo ROMs and Android builds with no luck, till i read somewhere online dat some guy seemed 2 solve his touchscreen issues by installing "CleanRam", ran a level 3 clean up (use MyMobiler for this) and by pressing real hard on the red end key button..I did just dat and voila it works!!
I have a Tmobile HD2 which is no longer covered under warranty and i'm not willing 2 part with almost $200 here 2 have d whole lcd & digitizer replaced...I recollected dat in d forum i read the suggestion from, a lot of ppl came n posed their views on why it's not possible but i tell u it is cuz it worked for me..Nw i'm comfortably dual-booting WinMo & Android via sd. i use "button savior" and "extended control" to navigate and power down/reboot respectively.
Hweva i believe its not a permanent fix as it simply refuses 2 allow me run android full-time thru MAGLDR, & i think i know y..pressing down on d end button 2 launch MAGLDR/CWR options after install messes up d connection with d digitizer underneath and d touch screen thereby causing it 2 fail again when android boots up....I just might try opening it up myself n cleaning dat area up as u suggest but dat'll be when my current fix fails cuz as d saying goes "If it aint broken? then don't fix it"
Just installed Button Remapper, and not to sound like an idiot, but can someone tell me which one I would have to remap to make the volume up key or down key to put the phone to sleep and wake it up, and would that still be able to use the volume key to turn up and down the volume as well?
AngelDeath said:
Just installed Button Remapper, and not to sound like an idiot, but can someone tell me which one I would have to remap to make the volume up key or down key to put the phone to sleep and wake it up, and would that still be able to use the volume key to turn up and down the volume as well?
Click to expand...
Click to collapse
Hmm...i don't use d app but from wat i can gather on d dev's thread, you would have 2 remap ur volume keys to "Power"...Also checkout dis review 2 learn hw 2 mk d remapped button work even in sleep-mode.
I can agree but mine's been in twice on repairs with the same error but screen was replaced both times amongst the digitizer, backcover (Can't understand why) and 3 other things were replaced. Buttons weren't replaced.
CaCtuZ123 said:
I can agree but mine's been in twice on repairs with the same error but screen was replaced both times amongst the digitizer, backcover (Can't understand why) and 3 other things were replaced. Buttons weren't replaced.
Click to expand...
Click to collapse
If I'm to base how the HD2 is setup internally, they wouldnt replace the buttons, they would replace the contact or contact board under the buttons, remember the buttons are like a keyboard, they dont wear out, its what they push on that gets dirty or worn.
I was traveling and this happen t me and became desperate.
Following the instructions I come to the clear conclusion that our HD2 has this hardware problem.
If I do not use the end call button no issues with the screen, really, no issues.
Hope my feedback will be helpfull as well. Great job done here!
pauloviegas said:
I was traveling and this happen t me and became desperate.
Following the instructions I come to the clear conclusion that our HD2 has this hardware problem.
If I do not use the end call button no issues with the screen, really, no issues.
Hope my feedback will be helpfull as well. Great job done here!
Click to expand...
Click to collapse
Yeah HTC screwed up on dat...its just as said,1 has 2 be careful n avoid using d red end key button as much as possible 2 enable d device last much longer...And if u do ave 2 use it, press on d left-most part of d key (closer 2 d back arrow button) to get d job done.
I just had this issue happen to me and thought it was my build... But I found another way, I use Cyanogen Mod 7, and in the drag down menu (from the top) I added a sleep option, because thats the only thing I use it for... and I never have a reason to press the end button now.
This is the best thing I have found to fix it without having to remap the buttons
I guess I'm lucky because I have never had a problem with the responsiveness of the touchscreen and/or end button. I got my HD2 a month before TMO release date and trust me it has been thru alot (scratches all over, even a piece of glass missing next to the call button). So my question is how much pressure and wear 'n' tear are you all putting on your end button or phone for that matter?
big3d said:
I just had this issue happen to me and thought it was my build... But I found another way, I use Cyanogen Mod 7, and in the drag down menu (from the top) I added a sleep option, because thats the only thing I use it for... and I never have a reason to press the end button now.
This is the best thing I have found to fix it without having to remap the buttons
Click to expand...
Click to collapse
Can that be done with other roms? And wouldnt a shortcut or a widget on the main screen also work?
on1ydabest said:
I guess I'm lucky because I have never had a problem with the responsiveness of the touchscreen and/or end button. I got my HD2 a month before TMO release date and trust me it has been thru alot (scratches all over, even a piece of glass missing next to the call button). So my question is how much pressure and wear 'n' tear are you all putting on your end button or phone for that matter?
Click to expand...
Click to collapse
It all depends really Understand that not all HD2's go thru the same testing process when it comes out of the manufacturer. Also take into consideration that it also depends on how often you flash a rom, if your flashing a rom every day or every week expect that you will shorten the life of the end button, also it doesnt always mean that the button is bad, it could clearly be dirt underneath that could also be causing the issue. And I said the same thing when I saw posts about people saying that android killed their screen. I even responded to it but always maintained it was hardware, even though I didn have the problem, and I bought both my HD2's used in Dec. and the day it happened and I found out why I posted this, if I was to guess, I would say that I probably flashed both my HD2's close to 200 times with different roms, or upgrades, or testing fixes out.
So if your not a flash nut, then your probably safe. There are many factors that can play a role in the end button life cycle, And no two people use their HD2's the exact same way.
the non-responsive touchscreen problem happened to me this morning. I woke up trying to unlock my phone only to find that it would not respond to any touch gestures. I was however able to uninstall HSPL and Flash the stock WM6.5 rom since I was going to T-Mobile to get a replacement. When I took it to T-Mobile the employee resetted the phone by holding the 2 volume buttons and the power button then somehow the touchscreen started to respond to touch again. I was completely puzzled as I thought it was for sure a hardware problem. But now I'm going to flash Android and hopefully the problem will not arise again, if it does, back to T-Mobile I'll go!
What Android really needs is some sort of "X" button, or even a widget on the main screen that you can just tap and put it to sleep. The three most keys used in my opinion is the windows key (Apps that use it for a menu), the back key (Since there is no damn close button), and the end key (sleep, flashing, booting to magdlr).
Some one had a concept here of buttons that looked very similar to The desire HD, the greatest thing would be if someone could make the bottom of the htc sense (app drawer, phone, and the personalize) auto hide and have the desire HD buttons come up with a power button at the end and this way if you hit menu it would bring up the original 3 button screen.

Capacitive Home Button held down by unseen hands.

I've had a look around the internet and it seems the problem I'm encountering isn't an isolated one.
Inconsistently, when I tap the Home Key on my phone it acts as if it's being held down, the LED home button backlight dims and the recent apps screen comes up. After 5 seconds or so the LED comes back on and it's all ok again. This can happen repeatedly (I had it happen 3/4 times from Gmail then the final time it functioned as it was supposed to.) but it's largely intermittent.
I've seen various solutions online from a factory reset to tightening some screws on the back of the phone to demanding a replacement handset. This is my second NS already and I'd rather not go for a third if possible.
Does anyone have a suggestion?
This happens to me as well, regardless of the ROM I'm on. Locking and unlocking the screen fixes it but it's more of a minor annoyance to me.
Since posting, it hasn't happened at all.
GPS has stopped working though.

Screen Turning on delay !!!!

Rom: Olyfr sbf upgraded to 4.1.5.7 from 4.1.2.6 via OTA
Not rooted
I have not yet modified the power button.
'Cause I set up the fingerprint unlock,Im used to swiping my finger after press the power button.
after pending or standing by a while(maybe),It vibrates once after my unlocking through scanning fingerprint.But!!!! The screen is still black!!!
Meanwhile,touching the four buttons on the bottom,it still vibrates!
And waiting for seconds,Screen on~~~~~
Symptoms sound a lot like my Bell Vibrant before it died after the Froyo upgrade.
Have you tried resetting your phone yet?...
Okay,I have flash it to 4.157sbf,and temporarily nothing goes wrong
I have the same symptoms. Sometimes when I push the power button it takes 3-5 seconds or more for the screen to light up. I did a power off and on and it works better. Not sure what is causing this but it is annoying.
I've had this on.both my atrixes and it seems to.resolve itself as the phone gets older
Sent From My Gibgerblurred Phone
I have had the same issue on mine. It occurs intermittently. Not always, but sometimes. And when the screen is turned off, I push the power button and nothing happens for about 3-5 seconds. Sometimes longer.
I do also have the fingerprint security feature on, though I am not sure if that that has something to do with it. However there is another problem with the fingerprint security.
Sometimes I want to check the time so I just turn on my screen and quickly turn it back off. But the screen turns right back on cuz it recognized my click as a fingerprint. However since it is too short to be recognized, it just turns my screen back on and says to try again. I try to turn the screen off again and the same thing. This also happens on occasions.
They need to make the power button better so that ways it does not recognize a screen turn off as a fingerprint swipe.
I have had similar problems. Rebooting has usually fixed them, at least for a while

Categories

Resources