Related
WOW, this new development using Flash Lite 2.1 and TouchCube version`(Alpha - DEMO ) is very impressive- smooth, fast and working with DPAD, and most important REAL Touch on Hermes. Can't wait for the Final version. Enjoy it
Here's the link for the alpha v2 http://forum.ppcgeeks.com/showthread.php?t=6938&page=9
and for flash Lite 2.1
http://adobe-flash-lite.en.softonic.com/pocket
and for the Cube config file http://forum.ppcgeeks.com/showthread.php?t=6938&page=8
Edit:I will remove the attached files if the Original Authors do not want me to post them here. Original post only linked to the PPCgeeks site forum.
13/09/07 - Add new zip file for SMS V2_W_SMS.zip - MUST install the original files first, then unzip, overwrite contents with SMS files. Note: when tap on the SMS button- use the left side of button ( tap on center button will exit to clock screen ).
04/10/2007 - Update new Cube Launcher v2_real.zip - 12 contacts, remove demo, improved features. etc... as per Byka post http://forum.xda-developers.com/showthread.php?p=1557000#post1557000 Post #104. Enjoy it
In this attachtment the cube :
-rotating realtime (when you pull your finger)
-invoke the cube: drag the finger bottom to up (on the mainscreen, is you not keeping that)
-remove the cube: drag your finger up to bottom.
-This version comprise the 12 contacts , real and refresh datas look the signal and battery icons (colored yet, this relevant me beetwen test).
-this version not comprise the sms imput panel, but I removed the "sample message" text.
-lack now vibrate icon.
-removed the Demo texts.
Next release: Button on the mainscreen for you fauvorite ScreenLock program.
The SMS write panel finished, but I testing yet, I liking preference the t9 looked panel here big buttons. (abc2...def3...)
10/10/2007 - Add new version cube_real_edited.zip as per Byka Post #117. Unzip, copy over existing installation and Enjoy .
24/10/2007 - Add new version from Byka post #143
Cube v_2.1 + selectable MainScreen_w_Digital clock +Config12_background + efrost MINIMIZE.exe + notyfi.mscr for Mortscript.
WARNING! The all files default folder on your PPC in the Main Memory:
../Program Files/Szabi/CubeLauncher
In the new Page1.txt config file add some variables:
&Timeformat=24& //digital clock hourformat
&Vibra=off& //not avaible
&MainScreen=off& //If you like keep to the MainScreen ==>
&Minimize=on& //apply the MINIMIZE command only, not will be exit the cube, when that invisible
&Name1=Contacts &Command1=".. //etc... etc...
If you like apply the MainScreen the missedCalls and the missed SMS indicators (or FGA's super mainscreen) you need prev. installed (and one running) MortScript.
If you like apply EFROST's super FTouchFLO applycation starting the my cubefrom default TODAY screen, you need the FTouchFlo folders write any settings in the settings file:
...
DownUpApp:/Program Files/Adobe/FlashLite/saplaywm.exe
DownUpAppCmdLine:"/Program Files/Szabi/CubeLauncher/Cube2.swf"
...
Speed and easy. I hope this help for you.
BR!
ByKa
Looks very good!
well its alll we got nice 1
gonna try looks ok,
jdac21
just installed it...and it works great!!!!
does it works with wm6?
dahool said:
does it works with wm6?
Click to expand...
Click to collapse
Yep, I've installed in my Hermes with WM6 and it's working with all features- including Sliding with your finger (REAL TOUCH).
pl55 said:
Yep, I've installed in my Hermes with WM6 and it's working with all features- including Sliding with your finger (REAL TOUCH).
Click to expand...
Click to collapse
i confirm works great ,
jdac21
Could some one send-me flash Lite 2.1 please.. in that link it says: "Site Area Temporarily Unavailable"
[email protected]
PlZ!! ^^
dahool said:
Could some one send-me flash Lite 2.1 please.. in that link it says: "Site Area Temporarily Unavailable"
[email protected]
PlZ!! ^^
Click to expand...
Click to collapse
check your email
and enjoy the file attached
Thank you a lot!!! lets test it xD
dahool said:
Thank you a lot!!! lets test it xD
Click to expand...
Click to collapse
"DE NADA"
EDWARD
too nice!!!
I'll wait for the full version!!
anyone knows when it comes out?
how do i install this
i cant figure wich ones i need to install
mr_nonshalant said:
i cant figure wich ones i need to install
Click to expand...
Click to collapse
OK , Here's what I did:
1. Install Flas Lite 2.1 for PPC WM5 Cab into Main memory.
2. Install Szabi cab launcher cab to main memory
3. Copy Cube config directory to same directory as cube launcher
4. run cube config exe to config cub screen - Hint: save change after fill each screen ( there's a bug in the config that did not save properly)
5. Launch the cube and enjoy.
thanks for posting! This is a very cool high tech addition to the Hermes!
My screen is blank. Just the clock and beautiful girl. But no icons. I didn't really get into configuring it yet but I thought it would just open and run. anyone know where I am tripping up?
afguard17 said:
My screen is blank. Just the clock and beautiful girl. But no icons. I didn't really get into configuring it yet but I thought it would just open and run. anyone know where I am tripping up?
Click to expand...
Click to collapse
I have since uninstalled this, but I believe you first touch near the top of the screen, near the clock. The clock will disappear. Once the clock disappears, swipe from the very bottom of the screen to the top. That should bring up the cube.
pl55 said:
OK , Here's what I did:
1. Install Flas Lite 2.1 for PPC WM5 Cab into Main memory.
2. Install Szabi cab launcher cab to main memory
3. Copy Cube config directory to Storage card ( to save memory)
4. run cube config exe to config cub screen - Hint: save change after fill each screen ( there's a bug in the config that did not save properly)
5. Launch the cube and enjoy.
Click to expand...
Click to collapse
thanks for the instructions on using the new additions!
Here're some of the icons you can use, and a new background jpeg file ( if you don't like existing one ). Have fun
Anyone have a link to the config file? I got the other two main files from here...
http://forum.xda-developers.com/showthread.php?t=328010
However, they don't seem to have the config file, and I don't have a pocketpc geeks account to download the config.
Lots of thanks to Swampy395 for his rom and for pointing me in the right direction
FEATURES:
Added:
- Voip working, Just run Sip Config tool and in the proxy server enter for example sip.vyke.com (and you
can open a free account with them and get 1$ just go to www.vyke.com)
DO NOT install their client for Windows Mobile, it makes the blueangel very unstable
- Added Data_Backup 3.1
- Updated the M2DC config tool to .27
- Google.com opens by default in English
Removed:
- Windows live, I don´t even know what is it good for
- ArcsoftMMS, I have never sent an MMS in my life and don´t intend to start doing that in the near future
-Replaced default Manila2d skin with knobi´s skin http://forum.xda-developers.com/showpost.php?p=2671314&postcount=693
I wanted a different default skin but not willing to use one but hold two inside the precious memory
Also I removed the analog clock bmp files in the cab as this skin has no analog clock so they are not needed
My modded manila2d 0.11 cab file weights 12188KB
The one with the default skin 12289KB
INSTALATION:
You should first install Swampy395´s BA_Manila2D rom (if you don´t have it already)
This modded Manila2d has been tested only on
Swampy´s BA_M2D_CE_OS_5220275__Build_20275.1.3.3_V3
The M2D CABs are based on Explodes and Edited a bit by Swampie and myself Enjoy
Instructions
1 Download the modded ExtROM from here
or from https://www.largefilesasap.com/cupload/6e0ed652760ebb84c89cab2e5d530e18/ManilaKnobiExtROM.rar
until 04 Jan 2009
Copy ExtROM to your storage card
2 Now lets make a backup of your device. Open extrom/folder and click on PPCPimBackup.exe and backup to "storage Card\ExtROM"
"NAME" your backup "mybackup"
2 do hard reset then screen setup then wait some 10 minutes or so, When PPCPimBackup launches check what you want to restore
please note hotmail accounts don't seem to restore so well so uncheck hotmail and MMS then tap next then Network Wizard will launch
select your "country and provider" tap "OK" then tap "yes" then tap "cancel" That's IT sit back and let the device reboot Don't tap
the screen Just wait then set date & time ENJOY
Kind Regards
gloomyboy
ExtROM
gloomyboy said:
Lots of thanks to Swampy395 for his rom and for pointing me in the right direction
FEATURES:
Added:
- Voip working, Just run Sip Config tool and in the proxy server enter for example sip.vyke.com (and you
can open a free account with them and get 1$ just go to www.vyke.com)
DO NOT install their client for Windows Mobile, it makes the blueangel very unstable
- Added Data_Backup 3.1
- Updated the M2DC config tool to .27
- Google.com opens by default in English
Removed:
- Windows live, I don´t even know what is it good for
- ArcsoftMMS, I have never sent an MMS in my life and don´t intend to start doing that in the near future
-Replaced default Manila2d skin with knobi´s skin http://forum.xda-developers.com/showpost.php?p=2671314&postcount=693
I wanted a different default skin but not willing to use one but hold two inside the precious memory
Also I removed the analog clock bmp files in the cab as this skin has no analog clock so they are not needed
My modded manila2d 0.11 cab file weights 12188KB
The one with the default skin 12289KB
INSTALATION:
You should first install Swampy395´s BA_Manila2D rom (if you don´t have it already)
This modded Manila2d has been tested only on
Swampy´s BA_M2D_CE_OS_5220275__Build_20275.1.3.3_V3
The M2D CABs are based on Explodes and Edited a bit by Swampie and myself Enjoy
Instructions
First making a backup of your device.
1 Download the modded ExtROM from here
2 Copy ExtROM to your storage card then open extrom/folder and click on PPCPimBackup.exe and backup to "storage Card\ExtROM"
"NAME" your backup "mybackup"
2 do hard reset then screen setup then wait some 10 minutes or so, When PPCPimBackup launches check what you want to restore
please note hotmail accounts don't seem to restore so well so uncheck hotmail and MMS then tap next then Network Wizard will launch
select your "country and provider" tap "OK" then tap "yes" then tap "cancel" That's IT sit back and let the device reboot Don't tap
the screen Just wait then set date & time ENJOY
Kind Regards
gloomyboy
Click to expand...
Click to collapse
Ha Ha looking good there, Seems you catch on quick? Well done
PS I Fixed that link and 10 mins later it don't work again always had trouble with that extrom link?
Also It should work just fine with all my BA ROMs
The largefilesasap link should work fine (also very fast to upload) and no waiting time but it expires 72 hours from now
Knowing of the problems you´ve had with rapidshare for ExtRom I have now used megaupload may be it lasts longer over there.
By the way is there any reason why some of the default manila2d graphic files have to be on a folder of their own rather than \Windows ?
Having it all on \Windows would make it much easier to mod the default skin
By the way after installation of my Manila2d ExtROM I have 34Megs of Storage memory free
gloomyboy said:
By the way is there any reason why some of the default manila2d graphic files have to be on a folder of their own rather than \Windows ?
Having it all on \Windows would make it much easier to mod the default skin
Click to expand...
Click to collapse
All the graphics files were originally in the \windows folder but because of the extra hundreds of files in the folder, it was found to slow down windows significantly. Therefore, Xplode moved them to a seperate subdirectory to reduce the file count in \windows and speed up the response time.
Beta 1 ROM for the Blue Angel / Qtek 9090
Feedback welcome
Has a good backup program, based on swampys work (thanks!)
http://www.megaupload.com/?d=5JMQ6P2C
would you pls put some mirror for download
why?
Why, the megaupload link is still working...
hey man what is andriod????
hashimhoney said:
hey man what is andriod????
Click to expand...
Click to collapse
What?!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
###########################################################################################################
Before posting question read FAQ
###########################################################################################################
Official HP ROM
WM 6.0 18125.0.4.2 ENG
WM 6.5.x ROMs with bottom menu (new style) (BETA ROMs - be ready to find bugs and maybe not all your software will work correctly)
WM 6.5.3 29017 Manila Edition v0.5 UC (Langs for EzInput)
WM 6.5.3 23128 Manila Edition v0.4a UC (Details) (Langs for EzInput)
WM 6.5.3 23128 Manila Edition v0.4 UC (Details) (Langs for EzInput)
WM 6.5.3 23529 Manila Edition v0.3 UC (ReadMe) (FIX 1)
WM 6.5.3 28011 Manila Edition v0.2 UC
WM 6.5.1 23088 Manila Edition v0.1 UC
WM 6.5 ROMs with upper menu (old style)
WM 6.5 21867 Manila Edition v0.2 UC (Official WM 6.5 taken from HTC MEGA)
WM 6.1 ROMs
WM 6.1 21054 v0.9a Manila Edition UC (FIX 1) (The best ROM ever)
WM 6.1 21056 LITE UC
sandrew - $
gkleding - $
Margasc - $
emandell - $
R.C. - $
koetoe - $
lozefini - $
Federer73 - $
thebranded - $
Kato007 - $
rust123bg - $
Click to expand...
Click to collapse
ROM Info:
- 23128 XIP/SYS (AKU5308 Windows CE: 5.2 Build 4159 (1 July 2010 15:29:00) )
- LZX Compression
- PagePool 16Mb
Changelog v0.4a:
- [FIXED] SMS
- [FIXED] GPRS Tweak (missing dll)
________________________________________________________________
Changelog v0.4:
- [UPDATED] XDA_UC v2.0
- [UPDATED] GoogleMaps v4.1
- [UPDATED] Manila2D v2.0.2013
- [UPDATED] GPRS Tweak v0.6
- [UPDATED] SetVolume 0.8.0
- [FIXED] While in Camera HTCAlbum menu was empty
- [FIXED] Launcher wrong shortcut
- [FIXED] Lockscreen empty calendar item
- [NEW] Resco TaskManager (mapped to OK button)
- [NEW] SenseTasks
- [CHANGED] EzInput Menu
- [REMOVED] HTCPhoneCanvas
- [DISABLED] HTCMenu
XDA_UC folder content (All soft here you can easily remove if dont like or add your own)
AdobePDF v2.5.1.395886.cab
Compact qwerty by Default.reg (Remove if you want FULL QWERTY by Default)
G-Alarm 2.6.cab
GoogleMaps v4.1.cab
Opera v9.5 Build 17753.cab
Changelog Beta 0.2:
- Added Calendar and Date pickers
- Added HTC Random Access (See Contacts)
- Updated HTCAlbum 3.0
- Performance optimization
- HTC Keyboard enabled
- Changed all icons
Fixed
- Youtube
- LockScreen
Contents of XDA_UC folder
Opera v9.5 Build 2392.cab
G-Alarm 1.5.1.cab
cleanRAM 1.8.3.cab
AdobePDF.cab
Voice Speed Dialer.cab
CleanRAM Settings.reg
-----------------------------------------------------------------------
-----------------------------------------------------------------------
-----------------------------------------------------------------------
ROM Info:
- Windows Mobile 6.1 Professional
- OS 5.2.21054 (build 21054 1.6.7)
- PagePool 16Mb
Preinstalled Softwares :
"AdobePDF"="2.5.1.0.378273"
"AdvancedNetwork"="1.0.12.0"
"Audio Manager"="2.2.1917.1227"
"Album"="2.5.1822.1129"
"AudioManager"="2.2.1822.3925"
"BluetoothSetting"="2.11.1.2"
"BootLauncher"="1.0.37394.1"
"BTFTP"="1.2.33309.91"
"CMBandSwitching"="2.0.0.3"
"CMBluetooth"="0.9.0.0"
"CMInternetSharing"="1.1.1.0"
"CMPhone"="1.3.0.1"
"CMCallBarring"="1.1.0.0"
"CMCallerID"="1.2.0.0"
"CMCallWaiting"="1.0.0.1"
"CMPin"="1.3.1.0"
"CommManager"="2.9.13.0"
"ConnectionSetup"="3.0.1916.3629"
"CyberonVoiceSpeedDial"="1.2.b090504"
"DShow"="2.0.1916.3629"
"EnlargeStartMenu"="1.2.34828.1"
"FullScreenPlayer"="1.05.080828"
"HTCSettings"="1.4.3.0"
"HTC Calculator"="1.1.1918.2229"
"HTCFramework"="1.1.1916.4030"
"HTCKeyboard"="1.5.32645.0"
"Manila"="1.20.1913.1530"
"Messaging Client Arcsoft"="5.0.31.81"
"mHubVO"="1.7.090609"
"Notification Enhancement"="3.0.1917.1225"
"Phone Canvas Enhancement 2G"="3.0.1917.1620"
"PhoneSetting"="1.47.0.0"
"PictureEnhancement"="1.50.1912.1428"
"RingtonePlugin"="1.00.080624.4"
"Settings Improvement"="1.0.1917.1630"
"Shared_Modules"="1.01.1914.3331"
"SMSInboxThreading"="1.35.0.1"
"TaskManager"="2.1.34837.4"
"USB To PC Pop Up"="2.3.1917.1625"
"Voice Recorder"="1.10.1917.1725"
"WLANSettings"="2.6.5.0"
"YouTube"="2.6.1917.1628"
BacklightController 0.9.5.2
EasyContact 1.1
G-Alarm 1.5.1
GoogleMaps 3.2.1
GPS Quick Position
M2DC 0.29.235
MobilePad 2.5
ObexInbox 0.948
Opera Backup 0.12
PIM Backup 2.8
PocketRAR 3.90
SetVolume 0.5.1
SIPChange
SyncroTime 0.94
WM5torage 1.9
XDA UC 1.0.0.5
Changelog 0.9a UC
- FingerMenu <-> HTC Menu Enchancement
- Updated XDA_UC v1.0.0.5
Fixed
- XT9
- Redirect in Camera to HTCAlbum
---------------------------------------------------------------------
---------------------------------------------------------------------
---------------------------------------------------------------------
I updated WM 6.1 LITE ROM. Now it is as clean as possible.
Changelog:
- XIP/SYS 21056
- XDA_UC support
Preinstalled software:
- OBEX Inpox
- PIM Backup
- SetVolume
- WM5torage
Removed HP Stuff:
- ClearVuePDF
- Java
- GoogleMaps & GoogleSearch
- LockStream languages
- HPEnroller
- HPShortcuts
- VoiceCommander
- HPVoiceReply
- HPZip
- MMS Trash (Audio, video, picture templates)
- TTY & AOC & CB
- et9 languages (polish, italian, spanish, russian)
- HP Theme
Some modifications:
I changed Voice button functionality due to removed VoiceCommander
- one tap -> Volume (SetVolume application)
- long tap -> TaskManager
PS Feedback and bug report are welcome
----------------------------------------------------------------
----------------------------------------------------------------
----------------------------------------------------------------
########################################################################################################
Flash instruction:- Put Flash.dio and XDA_UC folder on SD card (SD should be <=2G)
- Hold mute + record together and finally press power and release all 3 together
- SDloader appear and will clean boot when done
- During clean boot, you will need to wait for 2 beeps sound before you see the welcome screen,the phone will be unresponsive at that point
Step-by-step guide on flashing the HP iPaq 600
########################################################################################################
Q: Manila right softkey is named "programs", but by pressing on it launches camera
It is a known bug related to M2DC (M2D Config). Exactly after flashing all should be correct, but if you open M2DC, change something in it and accidentally press to softkey tab and then press ok (without modifing softkeys) M2DC automatically redefine softkeys to their default values Phone and Camera. So this bug is related to M2DC. Because i am not a developer of this program, i cant fix this.
Solution:
by default softkeys are set to
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\Manila2D\Home]
"SK1"="Contacts"
"SK1Cmd"="\\Windows\\Start Menu\\Programs\\Office\\Contacts.lnk"
"SK2"="Programs"
"SK2Cmd"="\\Windows\\folderview.exe"
Q: I have a delay (2-5 sec) after I answer my phone
It is problem of all winmobile devices.
Solution:
Use default winmobile dialer
Install this cab or
Change key to zero
Code:
[HKEY_LOCAL_MACHINE\Security\Phone\Skin]
"Enabled"=dword:00000001
Q: When i create New Folder in WM6.5 StartMenu icon is ugly.
You can change folder picture. See code below, it is made for my two folders: Multimedia and Office. Copy attached folder icon to Windows dir and edit registry by analogy with code below.
Code:
[HKEY_LOCAL_MACHINE\SECURITY\Shell\StartInfo\Start\Multimedia]
"Icon"="\\Windows\\Start_Icon_Multimedia.png"
[HKEY_LOCAL_MACHINE\SECURITY\Shell\StartInfo\Start\Office]
"Icon"="\\Windows\\Start_Icon_Office.png"
Q: When my pda battery left about 35%, the pda starts to scream "Low Battery Voltage detected" and then after 10 seconds the pda will turn off.
It is related to bad calibration of your battery or your battery is bad (old)
Solution:
Buy a new battery.
Before you buy new battery, try this solution
Discharge your battery to 0% with video. Then without turning it on charge to 100%. Should happen recalibration of battery, if it is not so old.
If dont work this, so buy a new one.
Q: How can i see default windows keyboard, Block Recognizer and Letter Recognizer
They are hidden by default
To make them visible use small utility SIP Manager
Q: Weather on Home page dont work
It uses your GPS location. Updates only with WiFi. Of course, GPS signal dont work in houses, be closer to window or the best result be out of house.
One more solution with Mortscript
Q: My town is not in the weather list. Can i add more cities to manila weather?
Manila2D WeatherCities Editor v.1.2.1
Q: I dont see Missed Calls on Home tab
With new Manila v2.0 it is impossible to show them on home tab, even with M2DC.
Q: I'd like to use outlook as default calendar and default Task application.
Copy two files to Windows dir. From Home page will be access to default calendar. Find shortcut of tasks.lnk and copy it to StartMenu. You will have access to default tasks.
Q: ActiveSync is always running
Create Fake ActiveSync sever
Q: How can i watch streaming live TV?
Install Streaming Media
Q: D-PAD: How to use it?
It works like this: hold down the end call button for 1 second, and the red LED will light up to let you know it's working. When it's on, the number pad keys have the following functions:
1：Home 2: Up 3: Page up
4: Left 5: Enter 6: Right
7: End 8: Down 9: Page Down
0: Tab
To switch back, just hold down the end call key again.
Also, you can change the backlight by holding down the Windows key and a number:
win + 7: 1st level of screen brightness, with the keyboard backlight off. Good for using indoors in average lighting.
win + 8: 2nd level of screen brightness, also with keyboard backlight off. Good for bright rooms and outdoors.
win + 9: Brightest level (use when in direct sunlight)
win + 0: Lowest brightness level, keyboard backlight on. Good for dark rooms and nighttime.
Q: HTC Keyboard Customization (Not for builds with EzInput 2.1)
Language packs and XT9
[ABC as Default] - Set ABC as default IME for hardware and software keyboards.
[T9 as Default] - Set T9 as default IME for hardware and software keyboards
NB!
Not all languages work correctly, some languages dont have hardware support (only numbers from hardware keyboard)
To view language you should manually add your language code to the registry.
Code:
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9]
"AvailableLanguages"="0109[COLOR="Red"],0119,01OC[/COLOR]"
Choose language by pressing "*" sign on keyboard (Not from Personal -> Input Menu)
User Customization FAQ
1) Why XDA_UC folder is needed?
What the XDA UC service does, is silently install (or not so silently if needed by User), .cab, .xdas, .xml, .reg, .mscr. This happens either at first or second boot
2) How can i create automatically Email account?
Here
3) How can i create automatically Exchange server
Here
4) How can i set automatically TimeZone and Weather
Here
5) Additional options
Useful INFO
How to dump Ipaq 614c
Ipaq 614c French ROM
hey i just do quick try on your rom.
-odd to me when the customization engine finish and i press reset, the screen go blank (not off just black) and seem to hang there, i punch the pinhole reset and seem works fine
-your pagepool seem to be 4mb(based on pagepool_by_wlodixon)
-and the dpad program doesn't seem to work
-you use the 80mb flash.dio (based on original flash.dio?) instead of the 76.9mb that other rom cooker use so you have a lot of unnecessary empty space at the end of file but I guess you will optimize later
Thank for your feedback, it is my first rom
-your pagepool seem to be 4mb(based on pagepool_by_wlodixon)
Click to expand...
Click to collapse
OK I will increase pagepool size
-and the dpad program doesn't seem to work
Click to expand...
Click to collapse
D-pad is not in startup, press to icon and then red button. Working fine
-you use the 80mb flash.dio (based on original flash.dio?) instead of the 76.9mb that other rom cooker use so you have a lot of unnecessary empty space at the end of file but I guess you will optimize later
Click to expand...
Click to collapse
I use kitchen by captaintrip, it always generates the same size of flash.dio file (80 mb). If you use something different or know how to decrese size of ROM, share your knowledge
you can change the TEMPLATE.ROM in ROM folder to a smaller one, I used pdalcan rom as template which is smaller, make sure you replace the xip with yours though. But I guess it probably doesn't matter much other than the flash file is smaller
new version beta 0.2 uploaded, view first post for link and changelog
sergiorus said:
new version beta 0.2 uploaded, view first post for link and changelog
Click to expand...
Click to collapse
And what about manila version?
I downloaded version with manila and I can't load this ROM. "Update Error! Pls Check!"
Uploaded Beta version 0.2 of Manila edition and download mirrors added
I downloaded version with manila and I can't load this ROM. "Update Error! Pls Check!"
Click to expand...
Click to collapse
Charge you battery to 100% and try again.
andiha said:
And what about manila version?
I downloaded version with manila and I can't load this ROM. "Update Error! Pls Check!"
Click to expand...
Click to collapse
Had same sh*t , used laptop Card reader , failed , used external USB port card reader - worked (took me serveral hourse to figure wtf) i thougt i messed up my phone
So if you're writing a file to a SD or whatever and pulling it straight out this mite be the case (windows didint finish writing to the card thus the "delayed write" failed)
Thaqnks for the Rom will try this on my 614c some time later on
Thanks for this sharing. I thought it was my problem, checked 5 times and it always flashed OK. So not my ROM Problem. Check guys your card readers.
WM 6.1 21042 advice
I tried to install WM 6.1 21042 BETA 0.2 and it works fine.
BUT I have small advice - start menu font and context menu font size is too large.
Can you change size of it?
Just for example; ROM WM6.1 OS 5.2.20270 rev 1.2 FIX with iolite manila v22 (link is in sergiorus signature) has nice font size and exactly what I need and I am sure other guys will be satisfied
ber00 said:
I tried to install WM 6.1 21042 BETA 0.2 and it works fine.
BUT I have small advice - start menu font and context menu font size is too large.
Can you change size of it?
Just for example; ROM WM6.1 OS 5.2.20270 rev 1.2 FIX with iolite manila v22 (link is in sergiorus signature) has nice font size and exactly what I need and I am sure other guys will be satisfied
Click to expand...
Click to collapse
It is HTC Enlarge Start Menu program, in next update i will add a small control panel applet to enable/disable this feature.
Mirrors please rapidshare or megaupload will also do...
Manila Edition beta 0.3 uploaded. Check second post for changelog. Later will add standard version.
Now ROM is a little bit optimized and runs faster.
Report any bug, will fix as soon as possible
Please upload on Rapidshare
Rapidshare link
I am posting the new update of the Package to produce a full autoinstall over a current rom supporting SDconfig
Package Includes the folowing pakager + SDConfig for OS < 21000 and > 21000.
* Xboxmod Policy Patch - Allows TF2 Installation
* Xboxmod VGA Rhodium Manilla FIX 1D
* HTC New Contact Card
* HTC Notification - Frienly Notification Menu
* HTC Rhodium Menu Enahncement - Finger friendly menus
* HTC Rhodium Volume Control
* Xboxmod Hide Start Menu tab - Allow to open start menu instead of Programs
* VGA TP2 Keyboard without Arrows
* My Patch to fix VGA TP2 Keyboard Xt9 and keyboard layout.
* GSensor SDK
* VGA HTC Calculator 2
* HTC Album 3 VGA
* HTC Topaz Comm Manager
* HTC Topaz Programs Icons
For OS < 21000
* gwes.exe - Allows HTC Rhodium Menu Enahncement work properly in that versions.
Touch_Pro_2_SDConfig_Package_041309.rar
http://rapidshare.com/files/220953504/Touch_Pro_2_SDConfig_Package_041309.rar
---------------------------------------------------------
Updates from Touch_Pro_2_SDConfig_Package_040209.rar
* Xboxmod VGA Rhodium Manilla FIX 1D
* HTC Topaz Comm Manager
* HTC Topaz Programs Icons
---------------------------------------------------------
Updates from Touch_Pro_2_SDConfig_Package_033009.rar
* Oalla CGA HTC Album 3
* 26948339_manila - Fixes screen darkening after all contacts Menu
If I make an OEM of your keyboard it should display properly properly correct?
yes, after you include my patch it correctly displays numeric and letters without getting stucked on numeric.
It also gets the hard keyboard working properly on the touch pro
How to install it?
Sorry, I have no idea about the installation process, can somebody paste a link please.
Regards
hmmm can someone make an oem with all that in the first post PLUS the cdma sms fix v2? ill be much obliged plsssss
Does anyone have this exact gwes.exe and the gwes.exe.0409.mui that goes with it, in module format? Thanks guys.
Good Gwes.exe
Hello
the good gwes.exe for rom <21000 is in package "Touch_Pro_2_SDConfig_Package_040209.rar".
Bye bye
Leyto
ivanmmj said:
Does anyone have this exact gwes.exe and the gwes.exe.0409.mui that goes with it, in module format? Thanks guys.
Click to expand...
Click to collapse
This is the mui, however overwriting this causes to freeze on boot.
Also i dont have the modules for this. I.e. I have a gwes.exe and mui in module format but dont know if it is the same version.
Wanna me to share it to try?
I had some problems cooking non-module replacements for modules and replacing it on a working phone causes it to freeze at boot. :-/
I'll try to see if I can find them and post them here. If anyone else finds them first, please post them.
ivanmmj said:
I had some problems cooking non-module replacements for modules and replacing it on a working phone causes it to freeze at boot. :-/
I'll try to see if I can find them and post them here. If anyone else finds them first, please post them.
Click to expand...
Click to collapse
Try this modules
caldito said:
Try this modules
Click to expand...
Click to collapse
hmm... The ROM won't boot up at all with those modules.
Updated package on page 1
is there a cab that is just the "fix screen dim after menu in all contacts"? I am on a rom that I don't think needs the other fixes and I don't want the 3.0 album either.
Also, do people actually like the facebook features? Does it work smoothly? right now it takes like 5 secs to switch OFF of the facebook tab in contacts
Well, I am back and I am glad to have some time to support the community again, updated the first post and i will flash the rom today and will be able to support this thread as well.
Windows Mobile 6.5.3 Beta English Rom 28008
V1.0
Download via Rapidshare.com
IMPORTANT! If a program can not be closed with the X, please use the OK hard key!
Included Programs:
- HTC USB to PC
- HTC Comm Manager (Replaced with an older Version)
- Device Information
- Microphon AGC
- Button lock Setting
- New Keyboard Layout
- X-Button (Programs close by clicking X, for minimizing tap and hold X, tap and hold the Start key for Taskmgr)
- Reconizer integrated!
- HTC Power
- HTC Advanced Netzwerk (For GPRS Settings)
- WMP replaced (By a better player! Plays everything!!)
- xdaShutdown (Down in the Taskbar!) IMPORTANT!!! Shutdown function has a Problem with the Touchscreen!! does not work for landscape mode
- FlightMode
- .NetCFcfg
- Keyboardbacklight
- WLAN Settings
- New Bluetooth Settings!
- New Telefon Settings!
- 16MB RamDisk
- WM Widgets compatibility (IE8 must be installed!)
FIX:
- SMS Alarm
- changed Start Menu
- XIP improved
- Alarm Sounds
- CHome changed
- Input Options
- GPS Option FIX New
- Provider FIX New
- Lan Option FIX New
Misc:
- Made with a new Kitchen (much better)
- SQM Dummy (not important)
- FWUPDATE Dummy (sends data to MS)
- I deleted some files for more space
- System Tweaks New
The ExtROM can be used for the new version!
Extrom 23081:
Download via Rapidshare.com
- Office (UPX)
- Pocket IE8 (UPX,FIX Zoom)
- MyPhone
- WM MarketPlace
- NetCF 3.5
More Windows Mobile Apps by request.
The Extrom is installed by putting the folder to the sd card. The installation starts automatically after a soft- or hard reset. The cfg.txt can be editted to personal use.
In correspondance with cosmicgate, i decided to post our guide on how to upgrade here, to avoid question further questions about that:
THESE INSTRUCTIONS ARE SUITABLE FOR WINDOWS XP COMPUTERS ONLY!!!
For people running WM5/6x but with 43MB of storage:
You have to downgrade to WM2003 and here's how to do that:
1. Download this Windows Mobile 2003 SE rom:
Download from Rapidshare
Download from Uploaded.to
and extract it to a folder of your choice.
2. Remove both the the SIM card and the sd card
3. Put the device into Bootloader Mode, pressing power+record and reset
4. your device display shows Serial v2.0x
5. on the pc (running Windows XP!) open the Task manager, go to the 2nd tab (Processes) and kill "wcescomm.exe" and "WCSEMgr.exe"
6. Now let's start the actual Upgrade:
7. Navigate to the Upgrade folder
8. Start Maupgradeut_noid
9. If in the 2nd window the rom version is not shown, something went wrong, start over!
10. Then start the upgrade and you should see a progress bar, also look at the device's display, it should also show the progress.
11. After it finishes perform a "WM2003 hard reset" by pressing power and reset
12. wait for the extrom to finish
13. now you can re-insert your sim and sd card (if you are planning to go on from here, you can also leave them out).
14. proceed with "For devices running wm2003"
For devices running wm2003:
1. Copy repart_doc.exe and the unlocker cab to the device and install the unlocker. In the start menu you will find a folder named "Extrom Tool".
2. Click "unhide" (if you are getting an error message, proceed with 2.a, else with 3.)
2.a the unlocker installs into the standard folder for program files, which depends on the rom language can be "\programme" or "\programmes" etc.
2.b the link in the start menu always points to "\program files"
2.c the easiest way, to solve that, is to rename your program files folder to "\program files"
2.d that destroys parts of the system, but doesn't matter because it is just needed for unlocking
2.e since now the link location should be correct, proceed with step 3.
3. Click "unlock", maybe a soft reset is needed.
4. Start repart_doc.exe
5. Set the future size, if not pre-entered, to 128kb (smallest possible partition size on this file system)
6. Click "Format now!"
7. Soft reset
8. Go back to the Extrom Tools
9. "Lock"
10. "Hide"
11. Now proceed with "Upgrading a WM5/6 device"
Upgrading a WM5/6 device
1. Remove both the the SIM card and the sd card
2. Put the device into Bootloader Mode, pressing power+record and reset
3. your device display shows Serial v2.0x
4. on the pc (running Windows XP!) open the Task manager, go to the 2nd tab (Processes) and kill "wcescomm.exe" and "WCSEMgr.exe"
5. Now let's start the actual Upgrade:
5.a copy the downloaded nk.nbf to any given folder, let's call it Upgrade 28008
5.b copy the contents of this package to the same folder: MAupgradeUt_noID
5.c Start MAupgradeut_noID
6. If in the 2nd window the rom version is not shown, something went wrong, start over!
7. Then start the upgrade and you should see a progress bar, also look at the device's display, it should also show the progress.
8. After finishing, take the device out of the cradle take out the battery and insert the SIM card
9. copy the EXTROM folder to the sd card and insert the sd card
10. Hard reset the device, pressing reset+power and record+camera and in the menu, that appears set:
Enable_Kitl: NO
Clean Registry Hive: YES
Format Storage: YES
using the camera and record buttons.
11. press the mail button to confirm your selection.
12. your device starts for the first time, you align the screen and let the extrom install, it soft resets and your device is ready to use
Special thanx to d tow and chef tony
I will try it.
Synchronization does not work Microsoft ActiveSync Thank you Chef_Tony
what exactly does not work for you, i tested the sync with contacts, tasks, favorites and appointments and it all works out fine so far.
did you hard reset your device after upgrading, did you delete the old sync profile, set up a new one and set the content settings right?
Chef_Tony said:
what exactly does not work for you, i tested the sync with contacts, tasks, favorites and appointments and it all works out fine so far.
did you hard reset your device after upgrading, did you delete the old sync profile, set up a new one and set the content settings right?
Click to expand...
Click to collapse
Je bent echt geweldig werken nu
You are really great now working
Bedankt
Thank you Chef_Tony
I'm am also DLing now and will certainly give it a try. Great work and thank you both, D-two and Chef Tony.
Good work ;
It seems beautiful Rom
Many Thnx , Maybe I'll try it later
Best Regards.
great work..
how about input settings?
yes, i know that they are missing, i wrote d-two about that, i am missing them too.
hi good work
but there is missing in the contrast setting too.
hi d-two! i can't open wmp and set sounds & notification? why?
hi d-two! missing backlight slider
@xatan:
i can't confirm either of those bugs, did you perform a hard reset after upgrading?
@majkel & homam_france:
you are right, that is actually missing, updating first post!
Chef_Tony said:
@xatan:
i can't confirm either of those bugs, did you perform a hard reset after upgrading?
@majkel & homam_france:
you are right, that is actually missing, updating first post!
Click to expand...
Click to collapse
ok Chef_ ,i waiting for final version
what about microphone icon in the system settings is it there
how to turn on backlight?
====
edit:
problem solved
aaraj said:
what about microphone icon in the system settings is it there
Click to expand...
Click to collapse
No, there is no Microphone AGC in the settings.
changed 1st post
when using Lanscape mode, and at the restart, the screen will return to Potrait with a touch screen that does not irregular like the R71's Xplode. but it was not my experience on the d-two ROM version 1 (WM6.5.1 build 23052). try to use the method Lanscape then restart, then you will experience it.
one again
about gprs icon
gotz said:
great work..
how about input settings?
Click to expand...
Click to collapse
This solved the input settings problem:
Remove the "Redirect" value under the following keys:
[HKEY_LOCAL_MACHINE\ControlPanel\Input]
Until now, it seems to be a very fast and stable ROM!! My congratulations on this D-two!! and my thanks to Chef_Tony.