Related
Hey Guys, just rooted my epic and am really enjoying being able to use the root only apps. I was thinking of putting a custom kernel and rom on it maybe. Are there any good instructions for n00bs and also which one would give me better battery life, stability and maybe a speed boost. stable and battery is more important though.
Thanks
viper134 said:
Hey Guys, just rooted my epic and am really enjoying being able to use the root only apps. I was thinking of putting a custom kernel and rom on it maybe. Are there any good instructions for n00bs and also which one would give me better battery life, stability and maybe a speed boost. stable and battery is more important though.
Thanks
Click to expand...
Click to collapse
There are at least 3 different kernels you can choose from, I personally use MixUp because it is stock and overclocked (speed boost) and seems to work very smooth. I haven't had any noticeable additional battery drain, and quite possibly maybe have seen slightly better battery life.
This is the link for MixUp, as well as follow the OP original directions for flashing the kernel.
http://forum.xda-developers.com/showthread.php?t=786988
You will also want to bring in ClockWork Recovery -- This is what'll you'll need in order to begin flashing custom roms. Here is the link, and again follow the OP's guidelines for installing.
http://forum.xda-developers.com/showthread.php?t=782300
This version is a one click method, so it's relatively fool proof. Good-Luck.
Hey,
I see a lot of people using CM7 is this really the best one?
Also till how many mhz I can overclock on that one?
Yes Cm7 IS really great, in fact you can customize almost everything, and I really like that feature...
As for overclocking you can overclock I think to max of 768mhz(if I'm wrong somebody please correct me)...maybe you can a little bit more but I think it is kernel related...
Hope it helps,
Best regards
Sent from my HTC Wildfire using XDA App
Irrespective of which ROM you choose, it is the kernel which allows (or disallows) you from Overclocking. Till date, there are 2 primary kernels which are available - HCDR.Kernel by Jacob and nFinity by arco, and both OC support upto 768MHz. (I think Deep-Knight has recently developed a new kernel for his ROM, which allows OC upto 600MHz)
Because of this, you can overclock your stock ROM also, if you so wish, by simply flashing a custom kernel.
3xeno said:
Irrespective of which ROM you choose, it is the kernel which allows (or disallows) you from Overclocking. Till date, there are 2 primary kernels which are available - HCDR.Kernel by Jacob and nFinity by arco, and both OC support upto 768MHz. (I think Deep-Knight has recently developed a new kernel for his ROM, which allows OC upto 600MHz)
Because of this, you can overclock your stock ROM also, if you so wish, by simply flashing a custom kernel.
Click to expand...
Click to collapse
Hi!
Which kernels can I use for original rom, if I want to overclock? HCDR, or Deep, or what? It will make the phone instable, or not?
Thank You!
zigee said:
Hi!
Which kernels can I use for original rom, if I want to overclock? HCDR, or Deep, or what? It will make the phone instable, or not?
Thank You!
Click to expand...
Click to collapse
You can use any. nFinity MC4 offers more features though, like Smartass Governor. It can be found here:
http://forum.xda-developers.com/showthread.php?t=995301
Else, you can use HCDR Kernel also, if you wish, and decide for yourself which suits you:
http://forum.xda-developers.com/showthread.php?t=798471
It shouldn't make the phone unstable at all. But, in any case, make a Nandroid Backup beforehand.
Thank You
Well M using hell fire .. Cm7 based ....
Which is stable till 729 Mhz overclock m using max 729 and min 490 (I guess)
Phone is Much faster than before and love playing angry birds
I read all the 2 posts, but Im not sure to change the original slow kernel, for a faster. All have some bugs, battery life, wifi, etc...
I dont know, which could be better for the stock rom, or which could be better than the original.
Anyway, I want to try one of that, but I dont know which.
How can I flash just the kernel? And also back up my programs with titanium, or mybackup?
It clears everything like the rom flashing?
Ok, I made it, its cool, and faster. Thanks for the help.
is the overclocking "app" in standard cm7? Or i must go to market or anything else to download it?
Adria1234 said:
is the overclocking "app" in standard cm7? Or i must go to market or anything else to download it?
Click to expand...
Click to collapse
Its standard, under Settings > Cyanogenmod Settings > Performance Settings.
please guys i dont know is it normal or not so let me know that why does it always gets stuck on 3d tests while performing any benchmark using any of the overclocked versions gl notecore kernel. I really like that kernel but also do want some overclocking but whenever i try doing benchmark test using the extreme versions it gets stuck on the earth and moon rotation animation-testing screen and on antutu on the screen where battalion army animation is shown.
I have tried v2, v4, v5 v6 and till v8 extreme versions(overclocked) of gl notecore kernel. Tried and tested on rocket rom v7, kindroid v4.2 v4 3 and v5.1.1 also on latest and greatest clean note v4 but everytime it got stuck. It never happened to me on overclocked franco's kernel r5 nor did it ever happened on any cm9 or aokp roms while running anidroid kernel. So guys if you can help me out your help would be really appreciated
Thanks in advance.
I guess it's your device because I have used both benchmarks with gl notecore extreme and everything went all right.
I'm using v8 with criskelo's rom v10
i dont think so
perri.etb said:
I guess it's your device because I have used both benchmarks with gl notecore extreme and everything went all right.
I'm using v8 with criskelo's rom v10
Click to expand...
Click to collapse
Even i thought so at first but then why does other overclocking kernel work then and also once in the blue moon the overclocked gl notecore had worked suddenly but since then it has not. Please someone help me out.
Husson_Ally said:
please guys i dont know is it normal or not so let me know that why does it always gets stuck on 3d tests while performing any benchmark using any of the overclocked versions gl notecore kernel. I really like that kernel but also do want some overclocking but whenever i try doing benchmark test using the extreme versions it gets stuck on the earth and moon rotation animation-testing screen and on antutu on the screen where battalion army animation is shown.
I have tried v2, v4, v5 v6 and till v8 extreme versions(overclocked) of gl notecore kernel. Tried and tested on rocket rom v7, kindroid v4.2 v4 3 and v5.1.1 also on latest and greatest clean note v4 but everytime it got stuck. It never happened to me on overclocked franco's kernel r5 nor did it ever happened on any cm9 or aokp roms while running anidroid kernel. So guys if you can help me out your help would be really appreciated
Thanks in advance.
Click to expand...
Click to collapse
Delete ypur init.d folder....
I face this similar issue. May be the EX version is not for us.
lifehijack said:
I face this similar issue. May be the EX version is not for us.
Click to expand...
Click to collapse
For me it is, just use his rom. No tweaks that will conflict his kernel. Using now his rom and his beta 8.2 at full speed.
Not a single sod ore freez. Antutu 7300, quadrant 5300.
Please if you use a custom rom, delete all init.d. Those are his words. You can find it in system,etc,init.d
i tried it all
androiadicted said:
Delete ypur init.d folder....
Click to expand...
Click to collapse
Yes i already checked for that folder in system/etc but i cant locate one.
androiadicted said:
For me it is, just use his rom. No tweaks that will conflict his kernel. Using now his rom and his beta 8.2 at full speed.
Not a single sod ore freez. Antutu 7300, quadrant 5300.
Please if you use a custom rom, delete all init.d. Those are his words. You can find it in system,etc,init.d
Click to expand...
Click to collapse
By his rom do you mean cleannote v4 as it is the current rom im running. Also i checked for that folder but it is already not present there. Also now i have noticed that on his v8.1ex version i get screen freezes while running quadrant which only way to get rid off is restart the phone. Im loving his kernel guys its extremely smooth but just help me out with this problem as i wanna flaunt its performance through technical data. Lol
Thanks for your support guys.
Husson_Ally said:
Yes i already checked for that folder in system/etc but i cant locate one.
By his rom do you mean cleannote v4 as it is the current rom im running. Also i checked for that folder but it is already not present there. Also now i have noticed that on his v8.1ex version i get screen freezes while running quadrant which only way to get rid off is restart the phone. Im loving his kernel guys its extremely smooth but just help me out with this problem as i wanna flaunt its performance through technical data. Lol
Thanks for your support guys.
Click to expand...
Click to collapse
Well some phones do not like oc and uv. You should do a clean install and do not restore apps and system with tittanium backup.
First test your cleanote without your apps. i use nofrills for to set my cpu. Do not use set cpu because many users experiance problems with that.
Good luck
no results.
androiadicted said:
Well some phones do not like oc and uv. You should do a clean install and do not restore apps and system with tittanium backup.
First test your cleanote without your apps. i use nofrills for to set my cpu. Do not use set cpu because many users experiance problems with that.
Good luck
Click to expand...
Click to collapse
Hey mate i have already done as you said. I have not restored any app through titanium back up. Infact i do not have titanium even installed on my note on cleannote v4. There is no set cpu installed too. Btw i tried with no frill but still no luck.
One tiny little request if you can will you post the link of this thread on galvin's kernel thread so that might be able to help me as of right now im veey junior member so according to xda rules i cant.
Thanks for your time buddy.
Hi, as you requested, he did post your thread link over at the NOTECORE kernel thread. However, as I mentioned above, I m facing the same issue and have read the kernel developers answer on this as well. Acc to him, not every phone can support the EX version. Its due to the difference in voltages. My phone cannot handle the EX version as well. However, I m happy to stick with the Standard version. If you're looking for great Quadrant and Antutu scores, just change the governer to pegasusq using SetCPU or any similar app, uncheck Power saving option and then run the test couple of times. I always get around 4400 Quadrant and 7100 Antutu scores.
thanks guys
lifehijack said:
Hi, as you requested, he did post your thread link over at
the NOTECORE kernel thread. However, as I mentioned above, I m facing the same issue and have read the kernel developers answer on this as well. Acc to him, not every phone can support the EX version. Its due to the difference in voltages. My phone cannot handle the EX version as well. However, I m happy to stick with the Standard version. If you're looking for great Quadrant and Antutu scores, just change the governer to pegasusq using SetCPU or any similar app, uncheck Power saving option and then run the test couple of times. I always get around 4400 Quadrant and 7100 Antutu scores.
Click to expand...
Click to collapse
Thanks to all of you guys for your wonderful support and help throughout. oh so atleast now i know whats the reason for that thanks anyways lifehijack and yeah i hit the thanks button for all of you.
Also many thanks for posting this link on gl notecore kernel thread
So is there anyways we could play around with these voltages and make it work. May be some technical experts here might have the answer to that i hope.
Im using notecore 8.1 ex with classic rom v3 and they both run fine have got pretty good scores too.
Sent from my GT-N7000 using xda premium
All you need is the setCPU app (search in xda forums,you'll find it) and change the governer from ONDEMAND to pegasusq, that's it.
lifehijack said:
All you need is the setCPU app (search in xda forums,you'll find it) and change the governer from ONDEMAND to pegasusq, that's it.
Click to expand...
Click to collapse
Yes bro i have done just the same as an alternative to ex version and it gives onsiderable performance and scores but will always have a craving for extreme version. Hope to get some technical help from xda experts to make ex version run on my note just fine.
As has already been mentioned not all phones are equal. your needs more core voltage than what my extreme kernel is configured for. if i increased it you would then complain about heat and battery life getting worse.
Stick with my standard version as that uses stock cpu voltages and frequencies. If you took the time to read the OP and even the last few pages of the thread you would have seen this mentioned.
You can use tegrak to adapt the frequency and the voltage. This way you can set the frequencies that suit best for your phone.
Sent from my Galaxy Note running ICS
g.lewarne said:
As has already been mentioned not all phones are equal. your needs more core voltage than what my extreme kernel is configured for. if i increased it you would then complain about heat and battery life getting worse.
Stick with my standard version as that uses stock cpu voltages and frequencies. If you took the time to read the OP and even the last few pages of the thread you would have seen this mentioned.
Click to expand...
Click to collapse
No bro im not like that complainbox guy. Anyways i dunno why and how or may be you read this post and improved it in your version 9 ex but now your ex v9 works perfectly fine on my note and yes buddy i have read your op around 4 to 5 times and everytime i install your newer version of kernel. And i wanna give you a big thank you for making us soo many wondeful kernels. Your are awesome mate.
I actually cant believe that such a wonderful and big developer came to my thread to help. Once again thanks alot and also a big thanks to androiadicted for posting this link on galvin's thread.
altae said:
You can use tegrak to adapt the frequency and the voltage. This way you can set the frequencies that suit best for your phone.
Sent from my Galaxy Note running ICS
Click to expand...
Click to collapse
Thanks for you advice mate ill check it out. Any recommended voltages and frequencies?
Hey XDA
i bought the setcpu app on my nexus and tryed to overclock it... as i realised it doesnt really overclock it as it only goes to 1.3ghz which is the max the stock can go lol
i take it to actually overclock the tablet beyond 1.3ghz i need to install a new kernal perhaps a custom kernal?
also whats the best kernal i could install instead of stock?
im looking to overclock it to the most fastest but safest speed i heard 1.8ghz atm also want to here other users thots on which kernal i should try,
also if i ever decide to reutn back to stock does everything as in the kernal and the firmware rom flash back to stock?
thnks in advance
You can't over clock the stock kernel. You need an alternative kernel. I like Motley's kernel but Trinity and Faux kernels are good.
Sent from my Nexus 7 using Tapatalk 2
so my best bet is elite kernal by clemsyns,
which file on his thread is the latest and best as in 1.8ghz?
encryptioncsta said:
so my best bet is elite kernal by clemsyns,
which file on his thread is the latest and best as in 1.8ghz?
Click to expand...
Click to collapse
with your thinking, you should go ahead and try clemsyns 2ghz kernel, its posted in the east few pages of the thread
but really, you won't be able to handle 1.8ghz as a daily, its more of a toy to play with. there are much better kernels here to use as a daily, that of from 1.6-1.8ghz too. try them all, find what yo like. when you lose battery like a artery in your neck that's been slashed, you'll realize that 1.8ghz is only for fun.
yeah lol iknow what you mean lol
iv tryed searching for the 2ghz elite kernal but i cant seem to find it within the thread... only mnaged to find 1.8ghz
can someone post it in here for me plz if they could that would be great, i dontknow which page it might be on...iv heard of talk about it but havent seem an actual download for it from clemsyns
I have had this phone since release and have been flashing ROMs and Kernels to it from the beginning. I mainly bounce on the ROM side from ParanoidAndroid to SlimKat to Purity. I tend to use either AK as a Kernel or a variant of Hells. I want to flash a ROM and Kernel combo that I can stick with (until I grab a Nexus 6 that is). I only need 3 things from any STABLE ROM / Kernel combination but they are non-negotiable in no particular order. Smooth performance, battery longevity and optimal audio quality. I would like whatever combo to be specifically geared towards that if at all possible. I am a junkie / flash addict and need this viscious cycle to end! Haha. If anyone could help me it would be greatly appreciated. Thank you very much in advance!
adamshumpisxxx said:
I have had this phone since release and have been flashing ROMs and Kernels to it from the beginning. I mainly bounce on the ROM side from ParanoidAndroid to SlimKat to Purity. I tend to use either AK as a Kernel or a variant of Hells. I want to flash a ROM and Kernel combo that I can stick with (until I grab a Nexus 6 that is). I only need 3 things from any STABLE ROM / Kernel combination but they are non-negotiable in no particular order. Smooth performance, battery longevity and optimal audio quality. I would like whatever combo to be specifically geared towards that if at all possible. I am a junkie / flash addict and need this viscious cycle to end! Haha. If anyone could help me it would be greatly appreciated. Thank you very much in advance!
Click to expand...
Click to collapse
Simpleasop(stock kernel is stunning too or else go for ak or hellscore) is the answer to all your OCD's.
Rohit02 said:
Simpleasop(stock kernel is stunning too or else go for ak or hellscore) is the answer to all your OCD's.
Click to expand...
Click to collapse
Thank you. Link please? Also...which Kernel do you recommend out of the two to be used in conjunction with this ROM?
Is this the one?
http://forum.xda-developers.com/nexus-4/development/simpleaosp-t2818402
adamshumpisxxx said:
Is this the one?
http://forum.xda-developers.com/nexus-4/development/simpleaosp-t2818402
Click to expand...
Click to collapse
yes.. Inbuilt kernel is good. or try ak.
Awesome. Thanks for your help. One last thing. Do you have any custom settings for the AK Kernel I can use? I see a lot of people tweaking and optimizing Kernels but never have myself. Perhaps you have something you could share. Anyway, I'll flash your suggestions in a day or two and let you know how it went.
adamshumpisxxx said:
Awesome. Thanks for your help. One last thing. Do you have any custom settings for the AK Kernel I can use? I see a lot of people tweaking and optimizing Kernels but never have myself. Perhaps you have something you could share. Anyway, I'll flash your suggestions in a day or two and let you know how it went.
Click to expand...
Click to collapse
on ak..
uv -50
smartmax governor, row scheduler
sound tweaking as you wish.
read buffer - 1024
thats it.
the BEST BAttery and performcnce you'll get with this.
The above our my standard and all time fav settings I use always