I just wanted to let you guys know that if you have a lot of crashes and/or problems with PPP data, you might try to change your Radio to one of the latest versions.
I'm curently using the energyrom(posted on this forum) and I always used the 2.07.50
Radio rom. With this Radio, I had a lot of problems with the Mattc build and the froyostone build concerning PPP data. I sometimes didn't saw the arrows, the phone froze,bad reception etc...etc...
After playing with the latest Radio, all my problems are gone. The 3G/HSDPA works as it should be. So for the folks who are still using RMNET like I used too, it might be worth changing your Radio to see if it fixes anything.
Hopefully it works for some people, but it doesn't for me.
I've always used 2.12 radio but PPP just does not work at all.
I'm still trying to work out exactly what prevents some people from using PPP.
I also had to use APN backup to configure my APN settings properly. Before that, it would'nt work for me either.
Try 2.10.50_26. Ppp works for me
Sent from my HTC HD2 using XDA App
im using whats in my sig and PPP works for me.
2.10 here too.
PPP works fine.
Sent from my HTC HD2 using XDA App
How far r we with the new build 1.2 can u give us in time waited all day today its 1am in UK now
Sent from my HTC HD2 using XDA App
yeah changing the radio fixed alot of my bigs
+1 for radio 2.10. I tried 2.12 and got freezes with PPP. Going to the radio below and PPP acts just like RMNet. I get the occasional 10-15 second freeze when recovering in WiFi, but I never get that in 3G/H mode.
PPP never work for me, tried all available radios for TMOUS, I don't get service at all.
+1 for 2.10.50.26 never had a problem with PPP, and I've used them all.
I use my ROMs clubbed with 2.10.50.26 as Radio and mattc/shub/hyper all work great PPP/RMNET/Wifi/Bluetooth
I guess it depends on what core files are being used on WM side...i use 2.14 base which came with the same radio as mentioned above and has best compatibility with the core files.
Yesterday, I got 1% hr standby with Push On and Bluetooth headset connected and few SMS....thats very much comparable to WM itself...however, sometimes it suddenly drains and I suspect some bg prog for that ...
Just adding a different approach to the story... Could the carrier have something to do with this??
I don't think the Radio version has anything to do with the hard freezes.. As I've tried every radio version and winmo compatible roms for android builds and still, I would get a hard freeze each and everytime.. It would work for a period of time, but once it disconnects and try to reconnect, it freezes.. Sometimes it would just freeze as soon as you boot Android.. And that only happens when I input the right APN settings for my internet plan.. Or when it starts accepting data's.. So I think it's got something to do with the Carrier, APN and Proxy settings.. Either you have to have the right internet settings for the Android phones/plan, or it would freeze your phone.. Anyway, that's just what I think.. RMNET on the other hand is rock solid! It doesn't matter whether you put a Proxy or not, it would connect just fine without freezing.. Just my observation..
For me only rmnet work, ppp never worked. I am in Switzerland by Sunrise. Is there someone being by Sunrise Switzerland and having ppp working?
I am running hd2 mattc 1.6b.
for those with working PPP, sorry to say, it's only a matter of time for yours to crash...your lucky. There is still an issue with PPP in the latest kernel's. They are working on a fix. Hopefully you will still be lucky and your PPP build is still working when they update the kernel with a fix. For others with the hard freeze's. Your not alone, it's not your fault or radio, it's an error in the kernel. I don't take credit for this info, read the IRC channel and see for yourself. Straight from Letema & gauner1986- the devs who made PPP work in the first place on our HD2's.
noellenchris said:
for those with working PPP, sorry to say, it's only a matter of time for yours to crash...your lucky. There is still an issue with PPP in the latest kernel's. They are working on a fix. Hopefully you will still be lucky and your PPP build is still working when they update the kernel with a fix. For others with the hard freeze's. Your not alone, it's not your fault or radio, it's an error in the kernel. I don't take credit for this info, read the IRC channel and see for yourself. Straight from Letema & gauner1986- the devs who made PPP work in the first place on our HD2's.
Click to expand...
Click to collapse
Thank you for the info. I was getting crazy.. I had the Matt 1.7 ppp working for 2 days no problem at all. But after 2 days I'm having intermittent hard freeze when I start the apn. ..
I was going to try with a 2.10. Radio.. but after your post I will kelp 2.12 radio and move to rmnet
Thanks for sharing
I'm on 3 in Australia
In my case both PPP and RMNET are working for normal Internet, but I cannot access Plane 3 on PPP, but I can access with RMNET. Anyone has the same issue on 3 in other countries? or perhaps any solution on how to enable Planet 3 on PPP?
Related
I Had major issues with the latest builds because of the PPP addon, the data won't work, or start.
After getting tired of running away from the problem using RMNET, I Decided to change my configuration,
This is the setup I Had:
HD2 GSM (Not TMOUS)
Chuky's GTX lite Rom for HD2
2.12 Radio
Andriod Roms whom I Had trouble with:
ShubCRAFT 1.4d
Mattec Leo+Froyo with sense 1.6-1.6b
then I Changed the setup to:
Cruzer Rom, sense 2.13
Radio 2.11 - 20
Andriod build:
Mattec Leo+Froyo with sense 1.6-1.6b
The first time I Booted I Had no connection what so ever, the second time I Got connectiviy but the symbol doesn't show the u/d status, and it still doesn't, but it does work, which is better IMO.
That's all, just wanted to share my solution to this annoying problem which atleast I Couldn't get rid off.
Sadly thou, I Only get a score of 1051 on Quadrant, don't know why, but the phone runs preety much fast, even with Live Wallpapers.
Cya
just want to ask, did the data connection works on all apps and browser?
i'm using 1.6b but found the data only work on browser but not work on others apps, even whether, facebook, market, news
can you works on all? and how about wifi? i tried another zImange or Rom can make the data works all fine but wifi error.
For me... I used Chucky Tabtastic and latest PPP_Root1.6b rom from mattc and it workded straight away.
As you said, the signal icon remains static does not show any activity but the connectivity works well.
I did not go through all the troubles you have
My fix for ppp was similar. I switched from a 2.12 radio to the 2.10 radio in my sign. Things are working MUCH better.
Sent from my HD2 mattc froyosense using XDA App
I can confirm ppp work in radio 2.10.50.28_2 for me in all apps
and it is stable so far (unless you toggle wifi on/off )
KenshinBHX said:
and it is stable so far (unless you toggle wifi on/off )
Click to expand...
Click to collapse
yeah.. that's a really big "unless" for me. I don't want to have to yank out the battery and reboot every time I want to use Wifi.
I'm with T-Mobile and the signal for my hd2 is solid on winmo, but when I boot android my phone signal fluctuates. It goes from 5 bars to 2 bars to none then back to 5 bars again and the cycle continues. I've tried several roms and radio changes as well as android built but that does not seem to fix the problem.
Does anyone know a way to fix this?
As of right now, I'm using Chucky with 2.12 radio and my favorite build Froyostone V2.
Mine does the same with froyostone v2 as well. Im running 2.08.50 radio. Frustrating!
geekyhawkes said:
Mine does the same with froyostone v2 as well. Im running 2.08.50 radio. Frustrating!
Click to expand...
Click to collapse
Are you with T-mobile as well? Do you experience this on other builts?
Sent from my HTC Desire using XDA App
Yep, have the same issue on Bangsters 1.3 build :\
T-Mobile, 2.12.50 radio
same issue with o2 and Radio 2.10 tested with HyperDroid and Bangsters
I'm T-Mobile and my signal is different depending on where I am at! But if I find the sweet spot it stays dead on.
Sent from my HTC HD2 using XDA App
Same issue. with radio ver. 2.12.50.02_2.
Signal seems solid on WinMo but on Android Bangsters 1.3a it jumps sometimes to Edge insted of Hsdpa. it depends on where I am. Conn-type-RMNET - PPP does not work for me.
The bottom line the signal is beter on WinMo. Hope this will be solved on next build.
I concur... I just recently started using Android on my T-Mobile HD2 and can relate that the signal quality as well as data connection is sketchy at best. One second I'll have a full signal and the next I have none. Then once the signal comes back, any and all data services also don't work.
Using Darkstone V2 and Radio 2.12.50.2
Exactly the same for me which is a shame because its the only problem left I'm having. The signal is there and its strong then it disappears and just keeps running that cycle all the time.
O2 stock 172 Rom
Radio 2.12.50.2
Sent from my HanDroid2 using XDA App
Same here
Shubcraft 1.5 radio 2.11. sometimes it shows no signal, how ever i dont know if it is just the software or actually the phone does not have signal.
Same on froyostone + 2.12 radio.
changed to mdeejay Froyo Sense + 2.11 radio
no more "no signal every 2 min, gonna smash my phone on the floor" for me.
2wice said:
changed to mdeejay Froyo Sense + 2.11 radio
no more "no signal every 2 min, gonna smash my phone on the floor" for me.
Click to expand...
Click to collapse
Let me test mdeejay's build, let's see if its better.
I have had the same problem, so i downloaded the "mdeejay_froyo_sense_v1.5_NOAXI " build, copied "rootfs.img" to my Andrid folder, restarted, and now it seems to not loose the signal at all. Full / almost full signal all the time.
I also tried to use "zImage" from the mdeejay-build. It also worked, but WiFi would not start at all. Just said "Fail", so i switched back
Not sure if this works for everyone, but it sure is worth a try...
QuaQuaRaQuaQua said:
I have had the same problem, so i downloaded the "mdeejay_froyo_sense_v1.5_NOAXI " build, copied "rootfs.img" to my Andrid folder, restarted, and now it seems to not loose the signal at all. Full / almost full signal all the time.
I also tried to use "zImage" from the mdeejay-build. It also worked, but WiFi would not start at all. Just said "Fail", so i switched back
Not sure if this works for everyone, but it sure is worth a try...
Click to expand...
Click to collapse
in settings under phone/cell standby what percent do you have without a signal? Mine is usually really high 50-80%. I've been able to pull 32 hrs out of a single charge when its on the lower end.
QuaQuaRaQuaQua said:
I have had the same problem, so i downloaded the "mdeejay_froyo_sense_v1.5_NOAXI " build, copied "rootfs.img" to my Andrid folder, restarted, and now it seems to not loose the signal at all. Full / almost full signal all the time.
I also tried to use "zImage" from the mdeejay-build. It also worked, but WiFi would not start at all. Just said "Fail", so i switched back
Not sure if this works for everyone, but it sure is worth a try...
Click to expand...
Click to collapse
Whenever you switch your zImage you have to also change your bcm4329 module, if not Wifi will not work.
I think we really need an exploration in radios in general. Pick a random set of builds and everyone switch out radios to see how connection goes. I live in a city that has the HSPA+ from T-Mobile and there are times I can't get voice to work on Miri 6.5/Bangers 1.3/2.12 (the latest) radio.
I am using chuckydriod with radio 2.12 and android build hyperdriod 1.2 using latest michyprima R11 kernal with axi scaling.
I have excellent radio performance in the following modes.
GSM only
Wcdma only
Dual mode rarely switches to GSM even when wcdma is dropping data connections in high GSM signal areas wich is a bug in my opinion.
Sent from my HTC HD2 using XDA App
Pure gold
Downloaded the Desire HD beta2 Android and i use the "rootfs" from that build...
Have not had any "zero-drops" at all, and i have signal in some bad areas where i had nothing before...
facing this problem too
using hyperdroid 1.5 and 2.12.50.02
I upgrade my radio to the newest one 2.14 on meedj's evo sense warm 1.0 thinking that it would help my phone signal, but it didn't help. Then i started messing around with my "network settings" and to my surprised it seemed to help. My cell signal still fluctuate but it never reaches "no bar".
Here's what I did:
Go to seetings, then wireless & network, mobile networks, network operators, then wait until you get 4 or 5 signal bars and click on "select automactically". I don't know what it does but it helps me and I hope it helps you too.
Note: you can also select "search network" and manually add your network in, it doesn't hurt trying. [/COLOR]
Let me know if this works for you.
Hey guys,
i have constant battles with my HD2 running Android. The mobile reception and logically because of that APN is also not workin properly.
Example: I'm at home and have full mobile-reception and internet is working flawlessly. One second later nothings workin... The reception display shows 4/4 lines and one second later 0/4. But i didn't move.. Same with WLAN and APN..
I guess it's not a "build problem", cuz i had this with lots of builds. So it's maybe a windows mobile thing. I have flashed 2.12.50 radio and chucky droid rom.
I tried 2.14 but my conversational partners had very strong echos. (with MIUI-Build)
I searched the forum and googled but i didn't find any solution for this..
Really need this to be fixed.
thx bench
benchbench said:
Hey guys,
i have constant battles with my HD2 running Android. The mobile reception and logically because of that APN is also not workin properly.
Example: I'm at home and have full mobile-reception and internet is working flawlessly. One second later nothings workin... The reception display shows 4/4 lines and one second later 0/4. But i didn't move.. Same with WLAN and APN..
I guess it's not a "build problem", cuz i had this with lots of builds. So it's maybe a windows mobile thing. I have flashed 2.12.50 radio and chucky droid rom.
I tried 2.14 but my conversational partners had very strong echos. (with MIUI-Build)
I searched the forum and googled but i didn't find any solution for this..
Really need this to be fixed.
thx bench
Click to expand...
Click to collapse
I don't know a lot about android. But i had similar "echo" problems when i used a TMOUS based rom. I use miris 1.80 based rom with 2.14 radio in the uk on vodafone with no problems.
Miri Rom Here: http://htcpedia.com/forum/showthread.php?t=2520
Have you tried a RMNET based android build. The data connection with those is slower but generally more stable. I use ppp but do get the data drop off. but turning the mobile data off and turning back on again sorts the problem.
It would probably better to post such questions in the android general section.
original_ganjaman said:
I don't know a lot about android. But i had similar "echo" problems when i used a TMOUS based rom. I use miris 1.80 based rom with 2.14 radio in the uk on vodafone with no problems.
Miri Rom Here: http://htcpedia.com/forum/showthread.php?t=2520
Have you tried a RMNET based android build. The data connection with those is slower but generally more stable. I use ppp but do get the data drop off. but turning the mobile data off and turning back on again sorts the problem.
It would probably better to post such questions in the android general section.
Click to expand...
Click to collapse
im currently using an RMNET Build. But this brought no improvement.
thx
Moved to Gereral Discussion Forum.
Mark.
i used winmob for a couple of hours and i experienced no reception variability. I'm completely stumped...
Any clue for this?
benchbench said:
i used winmob for a couple of hours and i experienced no reception variability. I'm completely stumped...
Any clue for this?
Click to expand...
Click to collapse
Same problem here. Signal drops quite frequently and for now i like the sense builds which you cant switch to 2G (unless im missing something). With other builds if i switch to 2G its sort of fine but slow data connection.
Same here, I live in holland and use the 2.14 Radio. I don't have a data plan yet (the phone is brand new), so it doesn't really bother me.. yet
we really do need a fix for this
Is nobody havin an idea?
Me 2
I´m having the same problem...anybody know a cure for this?
no problems here ... 2.10.5 radio
Same problem here,tryed different combo's with wm and Android,radio's etc......signal drops now and then.
Sent from my Desire HD using XDA App
Always signal drops here.. 35% of the time. Mesured with battery indicator.. only in Android not in winmo and I didnt find the right radio and rom for less drops.
Thats so strange. About every 10mins i have a totally data loss. Tried different radios and roms. Nothing helped. As i tried 2.14 i had strong echo issues.
i uploaded some screenshots. They're all taken at the same place. So you can see how strange these reception changes are...
http://img258.imageshack.us/img258/9430/snap20101011195709.png
http://img412.imageshack.us/img412/9261/snap20101011145139.png
http://img508.imageshack.us/img508/6186/snap20101011145334.png
Boy I'm glad to see this thread, I thought it was just me!
I am having exactly the same issue, and have done since using android builds. The only workaround I have is to switch on plane mode, and then switch it off again which seems to work for an hour or two. But then the signal goes all wonky again.
I wonder if this is also affecting the battery life. I'm sure I read somewhere once that loss of signal results in more battery use as the phone is constantly trying to locate signal.
I have tried a number of radio/rom combinations with no real change. As mentioned above, if I switch to 2G the signal seems more stable, but the data is unbearably slow.
I'm in the UK by the way.
drblow said:
Boy I'm glad to see this thread, I thought it was just me!
I am having exactly the same issue, and have done since using android builds. The only workaround I have is to switch on plane mode, and then switch it off again which seems to work for an hour or two. But then the signal goes all wonky again.
I wonder if this is also affecting the battery life. I'm sure I read somewhere once that loss of signal results in more battery use as the phone is constantly trying to locate signal.
I have tried a number of radio/rom combinations with no real change. As mentioned above, if I switch to 2G the signal seems more stable, but the data is unbearably slow.
I'm in the UK by the way.
Click to expand...
Click to collapse
Hope somebody's gonna know how to help us
push push push
me too!
I have the same problem. I might try the 10.2.5 radio as above?
I had this issue with Android that signal drops for no reason. The trick to my problem? Disable in the Netwok Mode "GSM/WCDMA Auto" and choose "GSM Only". Now the signal should work flawlessly without drops. It worked for me
Hi,
since some time, I am experiencing problems with my data connection. I dont really now, why but those persist through changes of AndroidOS, Radio and WM-ROM.
The Facts: HD2 european version, Operator: O2 Germany
The Problem in detail: When I am at home, I want to use my WLAN connection but some times, it doesnt connect to it. I have to manually go into the menu and reset my wlan-connection, so it works. Much more annoying is the fact, that when I am not at home (and WLAN is out of range), the phone often doesnt connect HSPA/3G/GSM/whatever and programms like maps, opera etc just claim to not having a data connection ready, though there are 2 to 4 bars. Only way to solve this -> go to flight mode, thet deactivate flight mode OR deactivate data connection, then reacivate it. Either way its annoing and mails won't be downloaded in this time, too.
My first setups, when I didnt have this problem where with WM OZDroid ROM, 2.12.50.XX Radio and many different Androidbuilts (no working compass / lightsensor etc - you know for sure ) Then I got to MDJ-Roms which I really liked and I never used another since those times. Still no Problems.
Then, by some time, I installed a new MDJ ROM - Mdeejay_FroYo_Sense_v._1.1_Clean_R75. This Rom needet to have PIN-auth disabled in Windows or it hung up in LOOP ( ). Sadly I installed a new WM-ROM and radio at the same time (I know, never change multiple parts at once... ugh!). Those where VBNDroid-Reloaded2-21913-Oct08 and Radio 2.15.50.14.
Since that time, I have this strange connection problem. I allready changed back to an oZDroid version and tried Radio 2.12 and 2.15. As Android ROM, i used MDJ eVo Sense Revolution 1.8 and now Mdeejay_FroYo_Revolution_v._1.6_S3. - Still the same problems.
I allready had the idea to reactivate PIN-auth but this option doesnt exist in my actual WM-OzDroid ROM.
Is there anyone experiencing the same problems or able to give me a hint in this case? I'am really not one of those persons "gimmie a new OS and I kill you if it doesnt work" - I know Android is work-in-progress but with all those superb fixes in past (lightsensor, compass etc) i cannot believe that a basic part like internet connection isnt working properly.
Thanks a lot for helping me out,
cmoe
RMNET
I think you'll find plenty of others who have had the same problem and some have had success with changing builds, kernels etc. There's plenty of stuff out there if you search on it.
I used to have data problems but switched to RMNET rather than PPP. You need to use a build that allows you to change this though and luckily for me, Bangsters 1.5 is such a build. It's not a sense build.
RMNET gets a bad press for it's speed, but to be honest it is perfectly ok for browsing the web. I leave all my downloading and updating till I'm on WiFi at home.
Regards your wifi issue, I have 'power control' widget on my homescreen and just switch WiFi off and on. Much easier than going into settings.
SteveDeckchair said:
I think you'll find plenty of others who have had the same problem and some have had success with changing builds, kernels etc. There's plenty of stuff out there if you search on it.
I used to have data problems but switched to RMNET rather than PPP. You need to use a build that allows you to change this though and luckily for me, Bangsters 1.5 is such a build. It's not a sense build.
RMNET gets a bad press for it's speed, but to be honest it is perfectly ok for browsing the web. I leave all my downloading and updating till I'm on WiFi at home.
Regards your wifi issue, I have 'power control' widget on my homescreen and just switch WiFi off and on. Much easier than going into settings.
Click to expand...
Click to collapse
This might sound a bit noobish, but I was wondering if someone can recommend an android ROM which provides a stable data connection with the windows stock ROM WWE 3.14 (Radio 2.15.40) with SPL (not HSPL)
I'm currently using the mdeejay froyo sense (v2.4). The pain for me is that the 3G connection rarely works, even in areas with full bars, and the roamin data connection tends to drop out a fair bit as well despite full bars. I've tried rebooting, and that normally works but it is real pain to have to reboot on so many occasions (not to mention slow). I tried switchin to airplane mode and then switching the mobile network on again, but that doesn't seem to work.
Hi Guys I have a little a problem with all ROM that I tested (cotulla and Prj Clean and one another that I don't remember) and I don't found a way to solve it.
My data connection is unstable... Sometime work very good but in a few minute doesn't work even if the network coverage is high. When doesn't work I seen on display that only the "transmit arrow" below the "H or 3g" blink. Tha connection sometime restore it functionality.
With windows mobile everything work good.
I have:
HSPL 2.08
Radio 2.15.50.14 But I try also with other Radio
Vodafone ITA
Any advice?
thanks, I'm getting crazy
Post questions in the correct forum... and search for PPP and RMNET. You are using PPP.
nobnut said:
Post questions in the correct forum... and search for PPP and RMNET. You are using PPP.
Click to expand...
Click to collapse
I wouldn't be so quick to say that RMNET is perfect as with me I find that it drops the connection a lot and often will not resolve a connection!
I haven't tried PPP since my last SD build so I can't tell if it's still as bad but it was quite bad back then.
nobnut said:
Post questions in the correct forum... and search for PPP and RMNET. You are using PPP.
Click to expand...
Click to collapse
cotulla stock build use rmnet I thought....
Any advice? This morning I tried MDJ_FroYo_Revolution_v._2.3 data was working for 5 hours and then drop down... and now nothing or very very slow....
I have the same problem too using Hyperdroid and MDJ Gingerbread. It works fine for a day and the next day in the afternoon the data would be lost. I mean no data whatsoever, not data drops like in SD builds. I can't see any G/E/3G/H symbol.
Rossimac said:
I wouldn't be so quick to say that RMNET is perfect as with me I find that it drops the connection a lot and often will not resolve a connection!
I haven't tried PPP since my last SD build so I can't tell if it's still as bad but it was quite bad back then.
Click to expand...
Click to collapse
Yeah that's been my experience too. In fact RMNET caused me to have so many screen freezes I had to revert back to PPP as the lesser of two evils. I guess this is the penalty for running Android on a non-native device I never experienced flawless data yet on any bulid be it SD, RAM whatever.
creed said:
Yeah that's been my experience too. In fact RMNET caused me to have so many screen freezes I had to revert back to PPP as the lesser of two evils. I guess this is the penalty for running Android on a non-native device I never experienced flawless data yet on any bulid be it SD, RAM whatever.
Click to expand...
Click to collapse
It's the only reason why I'm thinking about moving to a Nexus S - the data drops on this device are just not fun! I love my HD2 though, so I'll not sell it.
This problem has been here since day 1 with Android - but I'm not complaining as i haven't done any work with this, so I'll put up with what I'm given by the devs!