Database Users

G1 802.1x Support

Hey guys i'm thinking about getting this phone or the tilt. Main reason is i know WM6 supports 802.1x wifi security modes, which my school uses EAP-PEAP. i dont know whether or not the g1 supports it. Does it? i've been googling for a bit and nothing comes up. Thanks in advance.

shaokang said:
Hey guys i'm thinking about getting this phone or the tilt. Main reason is i know WM6 supports 802.1x wifi security modes, which my school uses EAP-PEAP. i dont know whether or not the g1 supports it. Does it? i've been googling for a bit and nothing comes up. Thanks in advance.
Click to expand...
Click to collapse
All I can see is WPA and WPA2 it doesn't let me configure it further. So I am going to guess no... I don't have any EAP or RADIUS routers to check.
But even if it doesn't have it... it can always come out later cause it is just software.

damn how long will it take........honestly i believe they released a half baked product anyway hopefully they'll do it in time before i get my tilt.

shaokang said:
damn how long will it take........honestly i believe they released a half baked product anyway hopefully they'll do it in time before i get my tilt.
Click to expand...
Click to collapse
You have to remember this product has only been out a week and a half and already they sent out a firmware update. Most other HTC devices don't get updates unless its from WM 6 to 6.1
Google likes to release things that are just bare minimum and use your feedback to build the rest. You will probably see quite a few firmwares being released. Remember this is all to benefit you. While it may be "half baked" to you right now... in the future it will include all the things you need... but not all those things you hated about other OS's

oh they already have firmware updates out? thats cool. Thanks

PEAP and 802.1x
Developers! I wish that i could contribute but i'm not a programmer. I am however leading a group of students on my campus to use the G1 to it's fullest potential. Everything from Gapp's to media sharing. The issue now is that there is no support/options for PEAP authentication on our campus environment. We have some of the best wifi coverage of most campus's i've been to but it defeats the $200 bill of the G1 if i have to rely on the edge network.
Is there any developers I can test configs for? I'll be a tester and can usually report back quickly.
needed configs for campus:
-WPA
-TKIP
-802.1 and PEAP
-AD username and Pswd
Thanks!
Jolopicus

It should work fine if you have root and set up the wifi connection manually with a custom wpa_supplicant.conf, the iptables thread in the development section would be a good start for reading what ya need to do. the default wpa_supplicant.conf on the device has all the settings possible in the comments.

Hi all,
I bumped this topic instead of creating a new one. So i hope this the right way. If i should make a new topic please say so. But this was the closes and only thing i could find about the topic.
Is there any information about getting RADIUS or 802.1x working on the G1. (My campus has this and i like to have internet access on my phone there as i do not have a data abbo).
I read that rooting your phone is a option, but i am not sure what image i should use and how to install it so i hope there is a way to do it on 1.6.
Looking forward to your replays.
Pimmetje

I have connection now with a WPA-PEAP network. That one is working but the raduis (8.02.1X) still shows up as web

Drivers for USB tether

Tried USB tethering for the first time today and I was pleased with how quickly it set up and worked.
Now, I have HTC sync installed as this is my main PC, but does anyone know the set of driver files needed for Windows to pick up the Hero as a modem?
I'd like to pop them on the SD card to allow me to enable internet access on anyone's PC or laptop without installing full HTC sync.

If you've a default set up, the NDIS drivers can be found in c:\Program Files\HTC\HTC Driver\Driver Files.
Regards,
Dave

Thanks but it only has the drivers there for Vista x64 (my OS), I really need drivers for XP and Vista x86 too

Odd - when I installed it here on W7 x86, I get both 32-bit and 64-bit driver directories. If you can, I suggest you install on a 32-bit installation to get the driver files.
Regards.
Dave

Hello everyone,
This is one of my first post/reply here, so before anything thank you very much to all here for sharing such good infos.
I've tried to setup my Hero for use as USB Modem as well, but can not find the "HTC Remote NDIS Network Adapter" driver either. Reading on different forums it seems it used to be on the memory card shipped with the device, but I bought mine 4 days ago and the file isn't there now. HTC has probably changed policy regarding this. Can anyone point me to where I could download this file to install on my lapto using Vista.
Thank you very much.

You can download HTC sync direct from HTC's website. It contains all the necessary software and drivers, and is a later version than the one that shipped with the Hero (at least when mine was shipped anyway!).
Regards,
Dave

u got it to work with the default program in htc sync??? i thought it doesnt work..i tried and i got an error

Works fine for me.
Regards,
Dave

do u happen to have sprint service? im getting a username/password issue...i know its not the wrong info because i can get online fine without tethering..... im reading at many other places that sprint doesnt have it working yet??

No, mine is not a Sprint Hero. It is possible that Sprint have disable this option.
You might want to try PDAnet to see if that works with a Sprint Hero (see http://www.junefabrics.com/android/index.php )
Regards,
Dave

thanks dave..yea pdanet does work, i havnt yet tried it because its a trial version and u have to pay for it...i came from windows mobile where tethering was super easy to do and the apps were plentiful.... but it seems the android market doesnt have tethering ..... i rely on tethering alot for when im traveling, i thougth the android market wouldnt be a problem with tethering apps..but it seems im wrong

The GSM Hero support tethering out of the box - therefore the issue is not Android, but more likely a restriction your carrier has imposed!
First things first though - check to see if you have "Mobile Network Sharing" in Menu->Settings->Wireless Controls.
Regards,
Dave

yes, i have the mobile network sharing... i even install the drivers for tethering fine... im getting a error 67 saying that my usrname and password for my internet is not valid.... although i can go on my internet normally via my phone only...i cannot connect a usb to it from my laptop.... right after i connect it, the internet disconnects from the phone then i get an error.... you are right about sprint blocking it.... but theyve been blocking it since windows mobile...people got around it with a simple app which came with all the hacked roms.... it seems like an issue here with the sprint android.... but maybe its still new?

lawsofpower48 said:
you are right about sprint blocking it.... but theyve been blocking it since windows mobile...people got around it with a simple app which came with all the hacked roms.... it seems like an issue here with the sprint android.... but maybe its still new?
Click to expand...
Click to collapse
Yes it is still very new. As with WinMo, you need a hacked ROM, but these aren't available yet for the Sprint Hero as it's only just been released. Once you've got a rooted ROM on your device, you should be able to use wireless wifi tether - the meantime, PDAnet is probably your best bet.
Regards,
Dave

foxmeister said:
Yes it is still very new. As with WinMo, you need a hacked ROM, but these aren't available yet for the Sprint Hero as it's only just been released. Once you've got a rooted ROM on your device, you should be able to use wireless wifi tether - the meantime, PDAnet is probably your best bet.
Regards,
Dave
Click to expand...
Click to collapse
yea hopefully it will be soon they come out with the roms.... need the tethering pretty bad ! i can wait and do without pdanet. lol. thanks alot !

oem.inf
I would like to share my solution. I modified the oem.inf file in the oem.zip(attached) ,by changing the manufacturer name and device id as given in the PC 's device manager(unknown device).
It should work for xp,seven,vista.

EasyTether

I was using EasyTether on my dual boot android Tilt phone before getting the Aria. I managed to find an apk but it's for an older version.
I thought I would see if someone can get a later version? as of post time the latest is 0.9.10.
I was able to use the Installing 3rd Party Apps post to load the version I found. So, it will work and doesn't require root access!
Edit: Removed attachment since there is a better way! Thanks guys!

Does it work on the Aria???
russell1997 said:
I was using EasyTether on my dual boot android Tilt phone before getting the Aria. I managed to find an apk but it's for an older version.
I thought I would see if someone can get a later version? as of post time the latest is 0.9.10.
I was able to use the Installing 3rd Party Apps post to load the version I found. So, it will work and doesn't require root access!
Click to expand...
Click to collapse
So you tried it and it worked??? please get back to me soon. thanks

russell1997 said:
I was using EasyTether on my dual boot android Tilt phone before getting the Aria. I managed to find an apk but it's for an older version.
I thought I would see if someone can get a later version? as of post time the latest is 0.9.10.
I was able to use the Installing 3rd Party Apps post to load the version I found. So, it will work and doesn't require root access!
Click to expand...
Click to collapse
If you have Wifi shut down your phone, take out your SIM, turn it back on and connect to the market via Wifi. Easytether will come back along with other AT&T restricted programs. This is what i did in order to get it back on my phone and it works great. Also one of the reasons why im baking it into my personal rom so i always have it.

bobj said:
If you have Wifi shut down your phone, take out your SIM, turn it back on and connect to the market via Wifi. Easytether will come back along with other AT&T restricted programs. This is what i did in order to get it back on my phone and it works great. Also one of the reasons why im baking it into my personal rom so i always have it.
Click to expand...
Click to collapse
Awesome, I'll have to try that technique!
Sent from my HTC Liberty using XDA App

bobj said:
If you have Wifi shut down your phone, take out your SIM, turn it back on and connect to the market via Wifi. Easytether will come back along with other AT&T restricted programs. This is what i did in order to get it back on my phone and it works great. Also one of the reasons why im baking it into my personal rom so i always have it.
Click to expand...
Click to collapse
Please forgive the NOOB, me......but,
I have the Aria on it's way and desperately need to be able to tether. I'm marginally savvy but know nothing about rooting....is it required to tether?
Or can I simply follow the instructions above on an unmodified Aria out of the box, install easytether and have it work?

Works
Confirm, this really works.
Thanks A++++++++++++++++

It does seem to work just fine

_Opiate_ said:
It does seem to work just fine
Click to expand...
Click to collapse
Just so I'm clear, (cuz I'm frequently not)
When you write "it" works, the "it" in this case is an unmodified Aria, with Easy Tether installed via the no sim/wifi download method described above - correct?
With no other fancy mods, I should be able to tether to my laptop - yes?
(fingers crossed)......

4th Level said:
Just so I'm clear, (cuz I'm frequently not)
When you write "it" works, the "it" in this case is an unmodified Aria, with Easy Tether installed via the no sim/wifi download method described above - correct?
With no other fancy mods, I should be able to tether to my laptop - yes?
(fingers crossed)......
Click to expand...
Click to collapse
Actually my Aria is in fact rooted running attN1's ROM. Sorry!
Can we maybe get someone with a stock out of the box Aria to give this a try and report back for our friend here!?
I'm sure we can get someone to try this for you. There seem to be plenty of Aria/Liberty users out there now.

_Opiate_ said:
Actually my Aria is in fact rooted running attN1's ROM. Sorry!
Can we maybe get someone with a stock out of the box Aria to give this a try and report back for our friend here!?
I'm sure we can get someone to try this for you. There seem to be plenty of Aria/Liberty users out there now.
Click to expand...
Click to collapse
Thanks for quick clarification - and no problem. If, in fact, this works, I believe it will be the first (easy) successful tether mod - if I'm not mistaken - and a fairly big development. I've been searching feverishly for an easy solution since placing my order yesterday (confident that it would eventually be cracked). If we don't get a confirmation on whether this works on a vanilla Aria by the time mine arrives, I will gladly give it a try and report back asap.
This place is an amazing resource.

4th Level said:
Just so I'm clear, (cuz I'm frequently not)
When you write "it" works, the "it" in this case is an unmodified Aria, with Easy Tether installed via the no sim/wifi download method described above - correct?
With no other fancy mods, I should be able to tether to my laptop - yes?
(fingers crossed)......
Click to expand...
Click to collapse
You can get a good nights sleep tonight. I have verified that taking your SIM out and connecting to the Android Market using Wifi will allow you to download EasyTether and install it on a stock Aria. I too had a big need to tether, but I was keeping my Samsung Jack in my computer bag for that very reason.
Now that I have EasyTether loaded on my Aria it works perfectly. I will probably end up buying the full version for $10.00 because I will need https support once the trial runs out.
Regards,
Tom

tpbklake said:
You can get a good nights sleep tonight. I have verified that taking your SIM out and connecting to the Android Market using Wifi will allow you to download EasyTether and install it on a stock Aria. I too had a big need to tether, but I was keeping my Samsung Jack in my computer bag for that very reason.
Now that I have EasyTether loaded on my Aria it works perfectly. I will probably end up buying the full version for $10.00 because I will need https support once the trial runs out.
Regards,
Tom
Click to expand...
Click to collapse
And the crowd goes WILD!!!
Thanks Tom! (and all!)
Maybe this needs to be a sticky?
AFAIK.....this is the first real success of tethering

4th Level said:
And the crowd goes WILD!!!
Thanks Tom! (and all!)
Maybe this needs to be a sticky?
AFAIK.....this is the first real success of tethering
Click to expand...
Click to collapse
You are limited to USB tethering just so you know.
-Tom

tpbklake said:
You are limited to USB tethering just so you know.
-Tom
Click to expand...
Click to collapse
Thanks, yea, not a problem - I prefer USB. When I would BT tether with my Pure, it would run @ 2mps, USB brought it up to 10.

I to can confirm it works as well. Stock at&t rom, Vista 64. I also went to cnet's bandwith meter and pulled 395kbps... meh I'll take it.

Now I have my laptop which runs Fedora 11 connected via Easy Tether.
I used the ubuntu drivers from EasyTether's website and converted them to an .rpm using alien to install it on Fedora.
Thanks for posting the how-to's they led me in the right direction.

Look like this is the way to install any software in the marketplace that AT&T does not approve.

Amazin Find. I have wifi 90% of the places I go but this helps everyone else greatly!

MotorHeadCG said:
Now I have my laptop which runs Fedora 11 connected via Easy Tether.
I used the ubuntu drivers from EasyTether's website and converted them to an .rpm using alien to install it on Fedora.
Thanks for posting the how-to's they led me in the right direction.
Click to expand...
Click to collapse
I tried the same thing in Fedora 13, but things don't seem to be working. After converting .deb to .rpm and installing it (no errors showing), I tried:
# adb devices
List of devices attached
HT06EHL07448 device
Click to expand...
Click to collapse
Device (Evo 4G) is connected.
Then
# /usr/bin/easytether enumerate
HT06EHL07448
Click to expand...
Click to collapse
So easytether sees it too.
However,
# /usr/bin/easytether connect
#
Click to expand...
Click to collapse
Nada. I tried (in a different window)
# dhclient easythether0
Cannot find device "easythether0"
Click to expand...
Click to collapse
As stated, I'm connecting to an Evo instead of an Aria. Running Froyo supplied by Sprint/HTC. (Easytether's FAQ claims that it should work on Froyo too.)
Any suggestions?
-Mark

i used pdanet to tethering with my GF aria the other day. Installation took a few minutes and worked great. The speed is much faster than the stock andriod browser.

General Ubuntu Chat

Who is running Ubuntu on their HD2?

svetius said:
Who is running Ubuntu on their HD2?
Click to expand...
Click to collapse
me. lol
including a custom modified usb hub (no Y cable needed) with keyboard and mouse.
currently trying to get a usb audio stick to work and some other device which is just for fun, it would need an external screen to make it useble.
plopper

plopper said:
me. lol
including a custom modified usb hub (no Y cable needed) with keyboard and mouse.
currently trying to get a usb audio stick to work and some other device which is just for fun, it would need an external screen to make it useble.
plopper
Click to expand...
Click to collapse
What's that with the modified usb hub? Where can I read more about that?

Tubgirl said:
What's that with the modified usb hub? Where can I read more about that?
Click to expand...
Click to collapse
you can find it here.
they are a bit harder to make but worth the extra effort as you don't waste any usb ports.
and it looks nicer offcourse.
plopper

I'm trying to run v0.3, but getting stuck part way through boot. My kernel is in a panic
Will update when/if I can convince it to keep calm and carry on.
[EDIT] Panic over. Must have been to do with the folder name on the root of the SD card. Did not work with "linux", "ubuntu", or "UBUNTU". But works with "LINUX".[/EDIT]

I was running it before I switched to NAND android. I was really surprised by how responsive it was,i thought it would be more laggy. Can't wait til MAGLDR can boot it
Sent from my HTC HD2 using XDA App

plopper said:
you can find it here.
they are a bit harder to make but worth the extra effort as you don't waste any usb ports.
and it looks nicer offcourse.
maby i should make a dedicated thread about building these, for sure i should make pictures of the finished device (open and closed case).
plopper
Click to expand...
Click to collapse
Yeah a dedicated step by step guide on building the hub would be excellent
joshk1025 said:
I was running it before I switched to NAND android. I was really surprised by how responsive it was,i thought it would be more laggy. Can't wait til MAGLDR can boot it
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
+1

TheATHEiST said:
Yeah a dedicated step by step guide on building the hub would be excellent
+1
Click to expand...
Click to collapse
As promised I will look into magldr booting. and regard the usb hub there are some details here http://htc-linux.org/wiki/index.php?title=Msm_Usb_Host
if you wish you can extend it by a step by step guide ;-) My own leo usb host setup is dirt cehap and very easy to wire.. I even have some spare parts...

dcordes said:
and regard the usb hub there are some details here http://htc-linux.org/wiki/index.php?title=Msm_Usb_Host
if you wish you can extend it by a step by step guide ;-) My own leo usb host setup is dirt cehap and very easy to wire.. I even have some spare parts...
Click to expand...
Click to collapse
yesterday i updated that page, you can find a link to a step by step guide now.
here it is
talking to the mods for how to handle this on the board, we decided to put the same manual here on the board to give support for the people trying to build them.
but under the android general and QaA section, as this should work there to and on meego and on other models of phones.
links are gone be added to both the ubuntu and meego helpfull links section.
plopper.

Is there a way to load ubuntu from magldr correctly ?

I got some problem with connecting via wifi to hidden network, after writing ssid window just dissapears and nothing happens :/ tryed couple tricks but nothing moved forward. Did someone have problem with connecting to hidden wifi network?

hairyhere said:
I got some problem with connecting via wifi to hidden network, after writing ssid window just dissapears and nothing happens :/ tryed couple tricks but nothing moved forward. Did someone have problem with connecting to hidden wifi network?
Click to expand...
Click to collapse
not reported so far.
the only wifi problem seems to be related to channel 12 and 13, so check if 1 of those is in use, if yes, change and try again.
plopper

couldnt manage to change channel, "no such device" but 2 days ago i could find wifi network, just couldnt to join it, and now theres nothing. I tryied to find with wicd and by terminal. Always there was response like i dont have anything to join network with.
But now thats my second problem, because i want to use wp7 720p recording (so i dont need to buy mini hd camera but wp7 sucks if i want to "work" on my phone so im trying to find some way to use wp7 and be possible to boot ubuntu. Any ideas of something like this possible? or maybe theres a wp7 bootable just like ubuntu? :> ( dreaming )

hairyhere said:
I got some problem with connecting via wifi to hidden network, after writing ssid window just dissapears and nothing happens :/ tryed couple tricks but nothing moved forward. Did someone have problem with connecting to hidden wifi network?
Click to expand...
Click to collapse
Please check your router settings. I had also trouble with the connection to my router. I find out that the MAC adress of the HD2 is different when WIN is on ore Ubuntu is on. After i take the new MAC adress to my Home network everthink works fine.

Chevron Labs on DVP

Anyone tried on DVP?

Yes, I will, and function.
But no interop-unlock, only for homebrew

keep an eye on this.. wait for someone to update...

If I purchase this, will I then be able to use the LED flashlight app that was made? What about Internet sharing?

Without interop you cannot access native comm and therefore no ICS. Flashlight can be done in mango now via API so no unlock is needed.

Shoot2ill said:
If I purchase this, will I then be able to use the LED flashlight app that was made? What about Internet sharing?
Click to expand...
Click to collapse
No Internet sharing for sure. Because the hardware doesn't have the capability.

MJCS said:
Without interop you cannot access native comm and therefore no ICS. Flashlight can be done in mango now via API so no unlock is needed.
Click to expand...
Click to collapse
Know of a working app? a few i tried said the dvp specifically does not work with most flashlight apps.

Anyone tried the interop-unlock with chevronwp7... http://forum.xda-developers.com/showthread.php?t=1271963?

You can't...yet at least

Finally, my DVP is unlocked (hope so, didn't try to install any homebrew apps yet). This time instead 550 people queed I had only 24. All you need is to login with LiveID (any, not necessarily your main identity), download new version (0.3) of the ChevronLabs Unlock tool, paste your unlock token and press unlock. It took less than 10 minutes to get long awaited message - your phone is unlocked. Thanks Chevron!

WaFer said:
Finally, my DVP is unlocked (hope so, didn't try to install any homebrew apps yet). This time instead 550 people queed I had only 24. All you need is to login with LiveID (any, not necessarily your main identity), download new version (0.3) of the ChevronLabs Unlock tool, paste your unlock token and press unlock. It took less than 10 minutes to get long awaited message - your phone is unlocked. Thanks Chevron!
Click to expand...
Click to collapse
I got a bricked DVP, can I use this to unbrick it ?

hihi2u2 said:
I got a bricked DVP, can I use this to unbrick it ?
Click to expand...
Click to collapse
Don't know. Mine was perfectly well. Probably not, 'cause unlock tool comunicates with the handset. However you may try - if it's bricked nothing could could make it bricked (but I take no responsibility)

Just unlocked my DVP via ChevronWP7 and it worked. Spent 30min in queue and it unlock in seconds. Already loaded the battery status app just to try it. Works great.

snailium said:
No Internet sharing for sure. Because the hardware doesn't have the capability.
Click to expand...
Click to collapse
OT
According to this (pocketnow . com/android/dell-venue-pro-may-never-get-wireless-hotspot-mode) article the dvp has a Broadcom 4325 chip (without wifi hotspot capabilities and wifi 802.11 n support) but in the hardware section of the leaked service manual I read "integrated Broadcom solution of BCM4329 WiFi/Bluetooth/FM SoC" altough in the compatibility tab appears "IEEE 802.11b/g" (no wifi 802.11 n support).
Did anyone disassembled the dvp to see what chip is actually inside?
Talkin' about this HERE
OT

InvisibleKnight said:
OT
According to this (pocketnow . com/android/dell-venue-pro-may-never-get-wireless-hotspot-mode) article the dvp has a Broadcom 4325 chip (without wifi hotspot capabilities and wifi 802.11 n support) but in the hardware section of the leaked service manual I read "integrated Broadcom solution of BCM4329 WiFi/Bluetooth/FM SoC" altough in the compatibility tab appears "IEEE 802.11b/g" (no wifi 802.11 n support).
Did anyone disassembled the dvp to see what chip is actually inside?
Talkin' about this HERE
OT
Click to expand...
Click to collapse
Someone had mentioned they used the manual to replace their screen in the thread about the Lightning manual.

i just wanna ask,after unlock ur fone,can u install register????what's diffrent with edu student unlock???
---------- Post added at 04:20 AM ---------- Previous post was at 04:14 AM ----------
WaFer said:
Finally, my DVP is unlocked (hope so, didn't try to install any homebrew apps yet). This time instead 550 people queed I had only 24. All you need is to login with LiveID (any, not necessarily your main identity), download new version (0.3) of the ChevronLabs Unlock tool, paste your unlock token and press unlock. It took less than 10 minutes to get long awaited message - your phone is unlocked. Thanks Chevron!
Click to expand...
Click to collapse
i just wanna ask,after unlock ur fone,can u install register????what's diffrent with edu student unlock???

stephenbibi said:
i just wanna ask,after unlock ur fone,can u install register????what's diffrent with edu student unlock???
Click to expand...
Click to collapse
The only difference with student unlock is that you can sideolad 10 apps instead of 3. I don't think you can install registry because Chevron unlock means no interop-unlock, wich is a deeper unlock (altough even interop unlocked dvps would need some specific programming to enable SET command in the registry).

InvisibleKnight said:
OT
According to this (pocketnow . com/android/dell-venue-pro-may-never-get-wireless-hotspot-mode) article the dvp has a Broadcom 4325 chip (without wifi hotspot capabilities and wifi 802.11 n support) but in the hardware section of the leaked service manual I read "integrated Broadcom solution of BCM4329 WiFi/Bluetooth/FM SoC" altough in the compatibility tab appears "IEEE 802.11b/g" (no wifi 802.11 n support).
Did anyone disassembled the dvp to see what chip is actually inside?
Talkin' about this HERE
OT
Click to expand...
Click to collapse
I don't know the chip or anything like that but once I was using an app called wifikill on android to kill the wifi on my bros Dvp. And it checked the Company of the wifi module to 'quisda corporation' if that is any help.
Sent from my GT-I5800 using XDA App

InvisibleKnight said:
The only difference with student unlock is that you can sideolad 10 apps instead of 3.
Click to expand...
Click to collapse
That's not true. My phone is "student" unlocked through Dreamspark since Nodo and I can only sideload 3 apps on my DVP, unless I did something wrong.

dilzo said:
I don't know the chip or anything like that but once I was using an app called wifikill on android to kill the wifi on my bros Dvp. And it checked the Company of the wifi module to 'quisda corporation' if that is any help.
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
Do the dvp and dvp pro have the same hardware? We could ask dell what inside our cellphone, plain and simple...
crav4speed said:
That's not true. My phone is "student" unlocked through Dreamspark since Nodo and I can only sideload 3 apps on my DVP, unless I did something wrong.
Click to expand...
Click to collapse
Student unlock = 3 apps
Chevron/Developer = 10 apps