As the title says, I have an Elf & when you press the power button (which is meant to turn the screen on and off) it shuts the device off instantly.
I first tried doing a hard reset
Then I tried another rom, to see if it was to do with the OS
& then I tried two other roms.
Ive still got the same problem.
Thinking of taking it back to the place I got it.
Anyone got any thoughts on any solution before I take it back?
Im thinking its a hardware problem that I cant really solve.
which spl are you using? I had a similar prob when i upgraded my rom to 6.1, but aftr using 3.07 spl, problems were gone..
I was using 3.07, but it doesnt matter now.
I took it back to the shop (with all accessories etc) and they replaced it for me. I feel bad about hastling them.
I took them an Elf, but apparently they have given me a Elfin, but on their system, they both just come up as p3450
But it works! thats the main thing.
and its gold and shiny.
Maybe somebody know how to solve this problem without turn elf back to the shop?)
I have same problem but haven't a chance to turn it back) 3.07 spl also
I had exactly this problem before I knew I have an Elfin.
I flashed Elf Roms on my Elfin, that caused the problem.
It boots regularly, but it will do a soft reset every X
minutes. Then I flashed an Elfin Rom and everything
works fine ^^
Maybe I'm wrong, but i think its Elf. It has 64Ram & 128 Flash, or they may not correctly view after flash or i dont understand differences?
It boots regulary every X minutes because it goes to sleepeng mode if device is not using. If this option off, it will not boot by its own, only if i press power button(
I had my Orange branded device one week ago, seeing that it is still with the 6.1 OS, I decide to go xda, so I tried the flashmore rom 1.7, 2.0 and the miri v18, I switched because I had some lockup from time to time...
And finally I got bigger pb, the divice can boot but with the screen off...
Therefore it is not very useful! And sometime (rarely) it boots with the screen.
So I switch back to the stock rom (RUU_BlackStone_Orange_FR-B2B_1.59.73.3_Radio_52.64.25.34_1.14.25.24), but I am having the same pb. Rarely the screen works and sometime also it works without backlighting....
Other problems :
-charging is randomly working like active sync,
-sometimes I get a message at starting:
"Microp Version
Mismatch 0
Please update latest Microp firmware"
-after hspl, I got weird colors with the stock rom.
Thankl you for your help
Anyone could help?
Hi everyone,
I've recently flash the rom to onyx 4.1 on my elfin. It was working fine for a few minutes. Then I've found it had a problem that it restarts by itself. After a couple restarts, the phone does no longer boot up. It shows "smart mobility" screen for a couple of seconds and turned off by itself. I was able to get into the boot loader and load another rom and it still didn't fix the issue. I was trying to look for other similar posts, but it wasn't successful. I wonder if anyone here have had similar problem before that can give me a hand. Thanks very much for your help!
Jack
This issue was resolved by flashing the original rom.
Please find this link for original rom.
http://forum.xda-developers.com/showthread.php?t=379034&highlight=original+rom
Hi,
i`ve got a problem with my touchscreen, after installing SD card distribution of Android, few restarts later my touchscreen stpped to respond every time when my device is locked, and i have to restart it.
I tried to flash new rom - nothing happend
H-E-L-P !
remove sd card delete the partitions and format - use Easeus free edition for this
Then boot the phone - reun task 29 from your pc then reread the flashing instructions for the rom of your choice and try again - ensure the rom supports your version og HD2 whatever that may be
All done, and doesn`t work. I`m wonderig if is possible, that is malfunction of touchscreen, because it have been changed after it was broken.
i'm having the same issue. after it goes into its first lock screen the touch screen input doesn't work. i've flashed the ROM and also task29 the sucker. i've reverted back to stock ROM too. I'm not running android or even try to install from SD.
Bump..!
Anybody got a solution for this..?
I have a HD2 with android on it.. nand version.. so it runs without sd card..
The phone works fine.. but when you lock it.. the screen doesnt respond anymore.. its running miui at the moment, so i can unlock the lockscreen.. but still the screen doesnt respond..
i see more people having this issues, so i hope to find a solution..
keep on searching..!
So Am I
after 5 moths of Android Nand use I have the same problem. I have changed kernel/ROM
I made few times task29 wipe cache/dalvik but still the same
Yesterday I try install the orginal WWE 6.5 ROM but nothing change...
Maybe is hardware issue ? Few times with android rom my leo was very hot and maybe something burn inside ? or its stupid idea but who knows
gomez.pl said:
So Am I
after 5 moths of Android Nand use I have the same problem. I have changed kernel/ROM
I made few times task29 wipe cache/dalvik but still the same
Yesterday I try install the orginal WWE 6.5 ROM but nothing change...
Maybe is hardware issue ? Few times with android rom my leo was very hot and maybe something burn inside ? or its stupid idea but who knows
Click to expand...
Click to collapse
Sure it's hardware: replacing touchscreen is your best choice!
But is this because of android on hd2? or do other people with stock phones also see this problem?
Hd2 is already gone here.. but i think its a good thing to know for the scene..
thommy86 said:
But is this because of android on hd2? or do other people with stock phones also see this problem?
Hd2 is already gone here.. but i think its a good thing to know for the scene..
Click to expand...
Click to collapse
It's a wellknown (hardware) problem for HD2, not related to software(android/wm/wp/whatever).
SO my LEO came back from service, there is a part list that they changed:
- 54h20178-00M pre-assy key, key FPC, UF-KS, w/o Reg
- 74H01549-00M Chassis Pre-assy, black, stainless steel, MLRB81
- 76H04078-00M tape, FPC connector, kapton, MLRB81
- 83H00294-01 change 83H00233-01, 83H00294-03, 62H00065-B1M Sub-assy to 82H
maybe You need do the same...
Okay, so i just bought my 6th HD2, and this one got the lockscreen problem as well. If i lock the screen using the red power button and try to wake it up with the same red power button i found out that it doesn't work. I tried everything but i think i found a sort of workaround for the touchscreen problem.
1. Lock the screen as you normally do, with the red power button.
2. Wait at least more then 6 seconds with the screen off.
3. Now push the VOLUME UP button to make the device wake up.
4. Profit!
5. If it doesn't work, go back to 1 and try again.
I found out that if it works 1 time it will work multiple times in a row.
I'm on NAND but i think it works on SD aswell.
Please post your reactions to this.
hi recently i installed the rom montana in my zenfone 5, it worked everything ok, but suddenly it blocks the screen in a strange way and does not unlock anymore, already tried to wipe at all and reinstall the rom or another rom again and it appears same lock screen, can someone help me ???
The lock screen Img
h ttps://imgur.com/XU5aQm4