Database Users

[Q] Bug - simultaneous press of volume rocker and power button

I'm about to exchange my phone, but I wanted to check here if anyone might have seen a similar issue, or have a clean solution to the problem.
If I press the volume rocker (up or down) and the power button simultaneously, then the screen will shut off, and then turn back on to show the lockscreen. The display doesn't timeout, but if I clear the lock screen, then the phone sometimes acts as if the volume rocker is held down. That means if the volume down was depressed, then the phone continuously vibrates.
I was able to recreate the problem at the Sprint store, but I haven't heard of anyone else on the forums being able to do so. Can anyone here recreate the bug?
It seems that this should be a software issue with the screen off procedure, and perhaps a wiping of the original rom might help. So far a factory hard reset using the built-in procedure hasn't cured the issue. Anyone have ideas?

I tried it and it doesn't happen on my phone. I did notice that if I held the volume down that the vibrate would stay on as long as the button was held down.
Ohh, that feels funny and tickles! Hey guys, tell your lady about this feature... Watch sprint get a bunch of shifts with burnt out vibrating motors. Lol

I read about this on the AndroidCentral forums, and I can't get mine to do that. It will sometimes stop the lock process, but it hasn't gotten stuck on vibrate. The other people I read about also said their phones didn't do it.
ah, I was looking for the link and realized that was you (or someone with the same screen name and problem haha) on the other forum, so I'm sure you already know that part.

Yeah, that's me. Just thought I'd try a different audience in case there were some different ideas. Thanks for responding though. Hopefully the exchange won't be for a bug worse than this one like the screen scrolling up while messaging.
The earlier post just made me realize that none of my other phones could ever continuously vibrate. haha. Maybe button free continuous vibration is a feature not a bug?

Did you try a factory reset on the phone?

I was just able to reproduce this easily.
Kinda funny.
Sent from my bathroom, with toilet paper.

Argh. I just exchanged my phone today and the new one does it too. I talked to an HTC person on the phone while at the store and they hadn't heard of the bug before. They also couldn't get the bug to reproduce, but I think it's just a matter of hitting the buttons enough times and at the right time. I also think the phone has to be in a ringer mode (at least two levels from the lowest setting).
I'm thinking I'm just going to have to get a case to make the rocker volume harder to hit. I think the size of my hands are just perfect for aligning my left thumb on the rocker when I'm powering off with my left index finger.
I did try the factory hard reset too, but no improvement other than it seemed like the odds of reproducing the bug went down a bit.

I don't see why this would be an issue, how often does one hit the volume rocker and the power button simultaneously? I've yet to come across this, and the thought of pressing the two buttons at the same time has never crossed my mind.
Sent from my PG06100 using XDA App

oboroninja said:
I don't see why this would be an issue, how often does one hit the volume rocker and the power button simultaneously? I've yet to come across this, and the thought of pressing the two buttons at the same time has never crossed my mind.
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
It would be great if I could claim to be an awesome bug tester, but unfortunately that is not the case. I discovered the bug because I was inadvertently hitting both buttons at once when turning off the display. I have the fortune of my hand being perfectly sized that my left thumb lines up exactly on the volume down rocker when my left index finger is on the power button. Same is true for my right index finger and right ring finger. It actually took me some time to figure out the cause of the continuous vibrate mode.
It would have been nice to replace the phone with a non-buggy version, but for now I'll just have to have better finger coordination haha.

nth_79 said:
It would be great if I could claim to be an awesome bug tester, but unfortunately that is not the case. I discovered the bug because I was inadvertently hitting both buttons at once when turning off the display. I have the fortune of my hand being perfectly sized that my left thumb lines up exactly on the volume down rocker when my left index finger is on the power button. Same is true for my right index finger and right ring finger. It actually took me some time to figure out the cause of the continuous vibrate mode.
It would have been nice to replace the phone with a non-buggy version, but for now I'll just have to have better finger coordination haha.
Click to expand...
Click to collapse
Lol understood.
Sent from my PG06100 using XDA App

I've had this happen to me a few times too. It's probably a Sense (or HTC's Android build) bug not a problem with the hardware.

Makes me think of the old joke doc it hurts when i do this. Well dont do that lol
Sent from my PG06100 using XDA App

The Infamous Unresponsive Digitizier Screen Possibly Solved!

Okay I wasnt going to post about this cause there have been way too many posts and alot of back and forth and debates and even flaming, but I stumbled across something that I think is the cause for MAJORITY of the issues with why we keep having this happen. It Happened to me Today, and I Found the cause.
Before ANYONE Flames me for bringing this up, READ the post, Remember I solved the cause of why it happens to most of us, I dont take responsibility if you choose to take it upon yourself to fix it! And I know 90% of the users are going to tell me I'm wrong or I dont know what I am talking about, so be it.
If you have nothing to add other then flaming the post, just hit the back button and be on your merry way and pretend you never saw it. But I am 98% sure I am right about why its happening!
So if your interested read on:
I actually for the first time had this, and I know this is going to get flamed but its not the Screen thats the problem. And I think (BIG IF) that the dreaded unresponsive screen issue that we keep reading about Majority of them I think is not the screen.
I have 2 HD2s and both have worked flawlessly without any problems, but today I was playing with my test phone that doesnt get used that much and I noticed after installing a new rom that my screen after I played with it for a bit went black (sleep) and when I woke it up it wouldnt respond, first thing that crossed my mind is I just lost my digitizier, and started wondering okay why, I went as far to re-flash WinMo stock HD2 rom, same issue, so I decided its time to find out exactly whats causing this, and I found it. I wasnt going to make a post again cause I figured people would be "Not another thread about this" but I know whats causing the screen issue, at least this is my suspicision and I have temporarily fixed mine.
The problem is HARDWARE, The Culprit: THE END KEY (Red Button)! The Answer to "How or Why": The "End" key is used to turn the phone on and off or to put it in sleep mode, it is the most used key out of all 5 keys, it is used probably 7x more then all the rest, Its used for just about everything, now how does this cause the unresponsive screen? Easy, the phone lock or sleep is associated with this key, Its the only way to make the screen go off other then waiting for the time out period. Because by habit we mostly hit the end key to turn the screen off the phone automatically associates this with locking the phone, once that happens the screen becomes unresponsive because of several reasons: 1) The contact under the actual key has dirt which causes the button to stick in the down position, 2) the contact is bent which the "end" key is pressing down on the contact which is making contact with the board and causing it to be unresponsive, 3) The contact is worn. This is the reason why if you press the end key a few times (anywhere between 2-10) and then try the screen responds, this is cause your "unsticking" the key which then lets the screen respond.
Most of us when we hit the end key press to the far right to avoid hitting the back key (The button with the left arrow) which causes the end button to lean toward the right. But you can wake the phone up with the other 4 keys to the lock screen which will allow you to unlock the phone. As a temporary fix for myself, on my test phone I now make sure to press on the left side of the key to prevent this from happening, since its a test phone I'm not worried, but the real solution is to take the phone apart and clean the underside of the end button, and the actual contact with alcohol to remove the build up of dirt and whatever else. And also if the contact frame is bent to GENTLY bend the right side back up alittle to stop it from happening, or sending it to htc and letting them fix it.
We have to RE-TRAIN ourselves to start using the other keys to wake the phone up and not rely on the end key so much.
Hope this helps anyone finally why we have this problem. And if it works for you then hit the Thanks button

I completely agree with you. I've had the "dead digitizer" since December. It was pretty apparent it was a hardware key problem, as I could generally solve the issue by pressing the "Off" button to turn the screen off, and then one of the other keys (usually the back button, but occasionally one of the others) to wake the screen up, and the digitizer would be alive again.
As I am still under warranty, I sent mine off last week, and expect to hear back within a few days. But if I had the confidence to open it myself, I was sure it would be fixed with a good clean.
Anyway, thanks for crystallizing all this into a post. Thanked!

THANK YOU SO MUCH FOR THE INFO. i have had so much trouble with unresponsive screen after installing typhoon 2.6.3 and it from holding down the red button all the time for install and the past millions times for everything else.

Thanks for the heads up
Sent from my HD2 using XDA App

U maybe be right about why this issue happens but if u rely on other key then will also wear out soon ...
What I did is I remapped my volume up n down keys to power and back button which I believe are the most used in android and then found a app to manage my volume in android that way I don't lose my sound on rhw phone
Also I went ahead and got a another app which places virtual buttons on ur screen so u can use then instead of the actual hardware buttons
For button remapping
get the BUTTONREMAPPER for android and for on screen android buttons get BUTTON SAVIOR
hope this helps
Sent from my HTC HD2 using XDA App

Good to know... will now wake my phone up with the green key as its hardly used in Android. Button Savior is a great app, been using it a while now. Took a bit to retrain myself to not use the back key.
Sent from my HD2 using XDA App

i'm going to agree with your hypothesis or at least suspect that dirt is probably a bigger factor than most people think in these cases. i just bought a non-responsive phone today and while i stuck my nail (yes, i should probably clip them) around the edge, in between the screen and housing, i was surprised to see just how much dirt was in between that crack. same with the area around the buttons; there's a lot of grime there.
since i just got the phone i haven't even opened it up but the first thing i'm planning to do is give it a good interior clean around the buttons for sure as that seems to be the sensitive spot. touch screen devices are very delicate and the micro particles of dirt which build up over time probably create a hazard that people really don't really anticipate. compound that with having to mash on those buttons all the time probably crams the debris in there even tighter.
i'll attempt to clean and check the contact as you suggested and will report back if it helped in my case.

About hardware keys:
I don't use them at all, only for wake up the phone (it can be wake up with any key)
There is an app in market called "button saviour" it's just excellent app to keep your hardware keys for a long time

AngelDeath said:
The problem is HARDWARE, The Culprit: THE END KEY (Red Button)! The Answer to "How or Why": The "End" key is used to turn the phone on and off or to put it in sleep mode, it is the most used key out of all 5 keys, it is used probably 7x more then all the rest, Its used for just about everything, now how does this cause the unresponsive screen? Easy, the phone lock or sleep is associated with this key, Its the only way to make the screen go off other then waiting for the time out period. Because by habit we mostly hit the end key to turn the screen off the phone automatically associates this with locking the phone, once that happens the screen becomes unresponsive because of several reasons: 1) The contact under the actual key has dirt which causes the button to stick in the down position, 2) the contact is bent which the "end" key is pressing down on the contact which is making contact with the board and causing it to be unresponsive, 3) The contact is worn. This is the reason why if you press the end key a few times (anywhere between 2-10) and then try the screen responds, this is cause your "unsticking" the key which then lets the screen respond.
Most of us when we hit the end key press to the far right to avoid hitting the back key (The button with the left arrow) which causes the end button to lean toward the right. But you can wake the phone up with the other 4 keys to the lock screen which will allow you to unlock the phone. As a temporary fix for myself, on my test phone I now make sure to press on the left side of the key to prevent this from happening, since its a test phone I'm not worried, but the real solution is to take the phone apart and clean the underside of the end button, and the actual contact with alcohol to remove the build up of dirt and whatever else. And also if the contact frame is bent to GENTLY bend the right side back up alittle to stop it from happening, or sending it to htc and letting them fix it.
We have to RE-TRAIN ourselves to start using the other keys to wake the phone up and not rely on the end key so much.
Hope this helps anyone finally why we have this problem. And if it works for you then hit the Thanks button
Click to expand...
Click to collapse
You just hit d nail on d head pal...My HD2's touchscreen also stopped responding and nothing i did (software-wise) worked...i flashed several WinMo ROMs and Android builds with no luck, till i read somewhere online dat some guy seemed 2 solve his touchscreen issues by installing "CleanRam", ran a level 3 clean up (use MyMobiler for this) and by pressing real hard on the red end key button..I did just dat and voila it works!!
I have a Tmobile HD2 which is no longer covered under warranty and i'm not willing 2 part with almost $200 here 2 have d whole lcd & digitizer replaced...I recollected dat in d forum i read the suggestion from, a lot of ppl came n posed their views on why it's not possible but i tell u it is cuz it worked for me..Nw i'm comfortably dual-booting WinMo & Android via sd. i use "button savior" and "extended control" to navigate and power down/reboot respectively.
Hweva i believe its not a permanent fix as it simply refuses 2 allow me run android full-time thru MAGLDR, & i think i know y..pressing down on d end button 2 launch MAGLDR/CWR options after install messes up d connection with d digitizer underneath and d touch screen thereby causing it 2 fail again when android boots up....I just might try opening it up myself n cleaning dat area up as u suggest but dat'll be when my current fix fails cuz as d saying goes "If it aint broken? then don't fix it"

Just installed Button Remapper, and not to sound like an idiot, but can someone tell me which one I would have to remap to make the volume up key or down key to put the phone to sleep and wake it up, and would that still be able to use the volume key to turn up and down the volume as well?

AngelDeath said:
Just installed Button Remapper, and not to sound like an idiot, but can someone tell me which one I would have to remap to make the volume up key or down key to put the phone to sleep and wake it up, and would that still be able to use the volume key to turn up and down the volume as well?
Click to expand...
Click to collapse
Hmm...i don't use d app but from wat i can gather on d dev's thread, you would have 2 remap ur volume keys to "Power"...Also checkout dis review 2 learn hw 2 mk d remapped button work even in sleep-mode.

I can agree but mine's been in twice on repairs with the same error but screen was replaced both times amongst the digitizer, backcover (Can't understand why) and 3 other things were replaced. Buttons weren't replaced.

CaCtuZ123 said:
I can agree but mine's been in twice on repairs with the same error but screen was replaced both times amongst the digitizer, backcover (Can't understand why) and 3 other things were replaced. Buttons weren't replaced.
Click to expand...
Click to collapse
If I'm to base how the HD2 is setup internally, they wouldnt replace the buttons, they would replace the contact or contact board under the buttons, remember the buttons are like a keyboard, they dont wear out, its what they push on that gets dirty or worn.

I was traveling and this happen t me and became desperate.
Following the instructions I come to the clear conclusion that our HD2 has this hardware problem.
If I do not use the end call button no issues with the screen, really, no issues.
Hope my feedback will be helpfull as well. Great job done here!

pauloviegas said:
I was traveling and this happen t me and became desperate.
Following the instructions I come to the clear conclusion that our HD2 has this hardware problem.
If I do not use the end call button no issues with the screen, really, no issues.
Hope my feedback will be helpfull as well. Great job done here!
Click to expand...
Click to collapse
Yeah HTC screwed up on dat...its just as said,1 has 2 be careful n avoid using d red end key button as much as possible 2 enable d device last much longer...And if u do ave 2 use it, press on d left-most part of d key (closer 2 d back arrow button) to get d job done.

I just had this issue happen to me and thought it was my build... But I found another way, I use Cyanogen Mod 7, and in the drag down menu (from the top) I added a sleep option, because thats the only thing I use it for... and I never have a reason to press the end button now.
This is the best thing I have found to fix it without having to remap the buttons

I guess I'm lucky because I have never had a problem with the responsiveness of the touchscreen and/or end button. I got my HD2 a month before TMO release date and trust me it has been thru alot (scratches all over, even a piece of glass missing next to the call button). So my question is how much pressure and wear 'n' tear are you all putting on your end button or phone for that matter?

big3d said:
I just had this issue happen to me and thought it was my build... But I found another way, I use Cyanogen Mod 7, and in the drag down menu (from the top) I added a sleep option, because thats the only thing I use it for... and I never have a reason to press the end button now.
This is the best thing I have found to fix it without having to remap the buttons
Click to expand...
Click to collapse
Can that be done with other roms? And wouldnt a shortcut or a widget on the main screen also work?
on1ydabest said:
I guess I'm lucky because I have never had a problem with the responsiveness of the touchscreen and/or end button. I got my HD2 a month before TMO release date and trust me it has been thru alot (scratches all over, even a piece of glass missing next to the call button). So my question is how much pressure and wear 'n' tear are you all putting on your end button or phone for that matter?
Click to expand...
Click to collapse
It all depends really Understand that not all HD2's go thru the same testing process when it comes out of the manufacturer. Also take into consideration that it also depends on how often you flash a rom, if your flashing a rom every day or every week expect that you will shorten the life of the end button, also it doesnt always mean that the button is bad, it could clearly be dirt underneath that could also be causing the issue. And I said the same thing when I saw posts about people saying that android killed their screen. I even responded to it but always maintained it was hardware, even though I didn have the problem, and I bought both my HD2's used in Dec. and the day it happened and I found out why I posted this, if I was to guess, I would say that I probably flashed both my HD2's close to 200 times with different roms, or upgrades, or testing fixes out.
So if your not a flash nut, then your probably safe. There are many factors that can play a role in the end button life cycle, And no two people use their HD2's the exact same way.

the non-responsive touchscreen problem happened to me this morning. I woke up trying to unlock my phone only to find that it would not respond to any touch gestures. I was however able to uninstall HSPL and Flash the stock WM6.5 rom since I was going to T-Mobile to get a replacement. When I took it to T-Mobile the employee resetted the phone by holding the 2 volume buttons and the power button then somehow the touchscreen started to respond to touch again. I was completely puzzled as I thought it was for sure a hardware problem. But now I'm going to flash Android and hopefully the problem will not arise again, if it does, back to T-Mobile I'll go!

What Android really needs is some sort of "X" button, or even a widget on the main screen that you can just tap and put it to sleep. The three most keys used in my opinion is the windows key (Apps that use it for a menu), the back key (Since there is no damn close button), and the end key (sleep, flashing, booting to magdlr).
Some one had a concept here of buttons that looked very similar to The desire HD, the greatest thing would be if someone could make the bottom of the htc sense (app drawer, phone, and the personalize) auto hide and have the desire HD buttons come up with a power button at the end and this way if you hit menu it would bring up the original 3 button screen.

Back Button Problem

This might be a relatively small problem but it can be a little annoying. The back button (right side of the menu button) seems to be a little less responsive and 'smaller' than the options button (left side of the menu button).
By smaller I mean I need to click it exactly at the right spot and the button reponsive 'area' seems to be very small compare to option button which seems to take up most of the left side allocated to it.
I am not sure if this is intented or some kind of software/hardware fault?
I read about upgrading touchpad firmware through *#*#2663#*#* but there are reports than this could brake the buttons completly.
If anyone has any information it will be greatly appreciated.
P.S phone is not rooted and I bought it from vodafone Ireland.

there are a few threads on the hardware buttons not working correctly try the search.
I found one about the back button, not a lot of info though.
http://forum.xda-developers.com/showthread.php?t=1057348&highlight=button

I have the same issue but also to another extent. Mine has an issue where sometimes it will double tap when I only press it once. This can get annoying. I do have a screen protector on and I'm not sure if that has anything to do with it.

Same thing happens to me ... but Its kinda rare(I am not using a screen protector). Does anyone know a solution? should updating firmware fix this?
I am thinking about asking for a replacement.

Replace it, same problem with my first unit, 20% of the presses didn't register
Sent from my GT-I9100 using XDA App

nomnompie said:
I have the same issue but also to another extent. Mine has an issue where sometimes it will double tap when I only press it once. This can get annoying. I do have a screen protector on and I'm not sure if that has anything to do with it.
Click to expand...
Click to collapse
I thought it was just me with the double tap when i press it once lol. Grrr its annoying man! :[email protected]
Sent from my GT-I9100 using XDA Premium App

So the only way to fix it is to replace it?

I would imagine someone can make a mod to the touchkeys for like a certain millisecond delay between presses to fix the double tap. People have patched hardware keyboards for stuff similar to that.
As far as the non-registering presses, that might have something to do with delay too. A smart developer would have to try and look at it though I'm just guessing here.
I haven't noticed the non-registered presses in a while, not sure if it went away with a new kernel or if I just got used to how to press it to make it work. The double tap happens more often to me now lol.

Happened to me on my first unit, back button was only responding about 50-60% of the time, on the 2nd phone back button was extremely sensitive ( as sensitive as the SAMOLED screen which is a huge plus) 3rd phone seems "normal"

Galaxy S2 back button getting pressed twice on a single press.
When I am in 2nd/3rd level screen of an app, back and menu button lights go off(but screen is on). While pressing back button sometimes it's going back 2 levels with one, single press! As if I have pressed it twice. It doesn't happen always though.
Is there any fix for this?
PS: I am using a screen protector. Will remove it and see if that's the culprit or not.

u shud b thankful mate..my home butoon stopped responding at all

Hi,
Sorry to hear that.
But how did it happen? And how old is your phone? It must be still under warranty. Did you try taking it to the service center?

Back button problem sgs 2
I was also having this annoying problem.....searched over XDA....and found some tricky (fishy) codes for updating touch firmware.....which may end up braking those keys....so i stayed away from those tricks..
i googled again and found one method which finally worked for me
To get sgs2 into sleep use power button...nd for waking up use home (centre) button...this worked for me
SGS 2/XWKF3/CF root

Odp: Back Button Problem
Sorry for digging it up. I have the same issue, sometimes back button is acting like it was tapped twice. Is there any sofware solution instead of replace any parts?
Wysyłane z mojego GT-I9100 za pomocą Tapatalk 2

i had the same promblem and a full wipe did the job

Anyone a bit annoyed at the lack of sensitivity of the back button on the HTC one?

I really do love the phone, but in find that the back button is a lot less sensitive that I would have liked.
I am coming from a GNex which had all buttons on the screen, and that worked great.
I can get used to not having a centre home button where the HTC logo is, but
I just find this back button a little annoying.
Sent from my HTC One using Tapatalk 2

wyase9 said:
I really do love the phone, but in find that the back button is a lot less sensitive that I would have liked.
I am coming from a GNex which had all buttons on the screen, and that worked great.
I can get used to not having a centre home button where the HTC logo is, but
I just find this back button a little annoying.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
I thought the same but it seems more about hitting the button in the right place. Once you have it sussed it's not a problem

animaleyes76 said:
I thought the same but it seems more about hitting the button in the right place. Once you have it sussed it's not a problem
Click to expand...
Click to collapse
Correct. The area of capacitive sensitivity is just a tiny bit larger than the back button icon itself. This means precise hitting is required. I think they should have made the touch sensitive area larger....

Ahh., I see what you mean. I will have to practice a bit. Yes, it is annoying, but it is just nitpicking a bit, I will have to manage it.
Thanks for the tips
Sent from my HTC One using Tapatalk 2

animaleyes76 said:
I thought the same but it seems more about hitting the button in the right place. Once you have it sussed it's not a problem
Click to expand...
Click to collapse
exactly, its just the button seems to be quite small - im not sure if thats a physical thing or a software thing (dont know how those "digitizer" things work) but maybe it can be changed in custom rom? who knows

It is too small then, this is the most annoying thing about this phone...when combined with the three dots, I keep hitting the menu!
I hope this can be improved.
Sent from my HTC One using Tapatalk 2

Well, because you are Nexus user. I am sure you can disable hardware buttons, and use only on-screen. If that is the problem to you.

if you put the vibration mode on it is easier to judge where the home button is ..
settings
sound
and select vibrate on touch
so every time you hit the home button you can physically feel it ... no vibration .. wrong place

sensetivity
Larger button area would make it easier to hit by mistake having just switched from my Desire s I too have found myself tapping the screen trying to get a response but it just takes a little getting used to and after just a few days I'm finding it works almost every time now unless I'm a bit pissed lol

Hard Press Home issue

Hi,
i have tome hassle with the hard press home thing.
Sometimes its working ok sometimes it does weird things.
for instance ... if i press the button hard it some times vibrates , when i let go it vibrates again and its unlocked... thats when i think its working correctly.
but sometimes it just vibrates two times although i didnt let go ...
sometimes on homescreen i swipe the homebutton slightly to clean it a bit... not hard pressing and its vibrating. sometimes one single time sometimes two times in a row .
anyone with the same issue ?
thanks

no one ?

Check what sensitivity you have the button set at. It could be too high or low.
I have mine set in the middle and never have an issue.

i tried severeal sensitivity settings ... sometimes it gets better and sometimes worse... but for me its not satisfying
i think i have to weit for an update or so ...

I had the exact same issue with my S8. Sometimes it just works, sometimes it doesn't detect it, sometimes it registers several hard presses even though I've barely touched it (sensitivity reduced as far as it goes).
This has been driving me crazy for the past week. The hard press function was unusable because of this.
At first I thought it's a software issue (something to do with calibration maybe?). I got an update which didn't fix it. I tried resetting it which didn't work either so I sent it back to Samsung yesterday. Waiting to see what they have to say about it.
The lack of complaints about this so far made me think it's just a weird issue with my unit.

I'm having exactly the same problem and it's driving me nuts for not knowing if it's a hardware or a software problem.
I've googled around and this is the only thread so far. Seems like there are very few people with this issue.
Let me know how the repair request went.

i sent it back also
new one is coming tomorrow ... lets see... will report

I have that issue too. Dont know what to do.

B-Man2005 said:
i sent it back also
new one is coming tomorrow ... lets see... will report
Click to expand...
Click to collapse
Oh wow, that's really fast. I still haven't heard anything from them. Did they give any information about what's wrong (hardware/software)?

no ... i didnt sent it back to samsung.
i bought it from amazon.de and ordered a replacement.
thats faster
it will arrive today then i can sent back my first one...

same here, having issues with the home press function .

I also send it back to the shop where I bought it

I´ve send mine back to the webshop also. My mate got his s8 2 days ago and his hard press was perfect and responded smoothly all the time. So i guess it must be a hardware problem.
Will share more info when i get feedback from the repair.

Same problem here, sometimes it works, sometimes (when the device is in standby) it works only after several tries and pressure in different spots.
Can someone who has got a new device or sent it to repair report if it is better now?

Hardware issue... my replacment Works fine now

Same problem
I have this issue also. Mostly it works, but sometimes it doesn't work and the phone hesitates to come back to life. If I press the power button after hard pressing the home button or just wait 5-10 seconds, the screen will come on. Oddly, when it doesn't work (and occasionally when it does), the small vibration thing happens. I have this turned off, but sometimes when hard pressing the home button, I get the vibration, but the screen won't come on. Other times, I get the vibration and the screen will come on. Mostly I don't get the vibration and the screen comes on. Annoying.

wmupchurch said:
I have this issue also. Mostly it works, but sometimes it doesn't work and the phone hesitates to come back to life. If I press the power button after hard pressing the home button or just wait 5-10 seconds, the screen will come on. Oddly, when it doesn't work (and occasionally when it does), the small vibration thing happens. I have this turned off, but sometimes when hard pressing the home button, I get the vibration, but the screen won't come on. Other times, I get the vibration and the screen will come on. Mostly I don't get the vibration and the screen comes on. Annoying.
Click to expand...
Click to collapse
As i said ... it seems to be a Hardware issue. Get a replacement

Mine does this often, i personally could care less for the home button function so I set the sensitivity to max and yet at times if I barely touch the home button area it acts like I have hard pressed the button.
Sent from my SM-G950U using Tapatalk

I have the same problem maybe even worse. To me it looks like it is accumulating presses, the more times I press the button the more times it vibrates. So at the end I sometimes get 4 or more vibrations for just one press. Sometimes after I lock the screen it vibrates by itself and turns on the screen.
Looks like I'll get mine replaced ASAP.

Got the same issue once in a while.. also have a faint red glow on the screen. Considering getting it replaced but dont want to wait for a replacement.