Related
Hey everybody,
I'm currently working/writing for the Wiki.
If you wish to see certain topics in it please let me know, or add it yourself
------------------
Update 28-01-2008
I've updated the wiki again. The following items have been done:
Added the ROM dump article from the forums written by pof
Added the link to the forum thread on the Niki Kitchen 0.3
Added some hacks & tweaks for the Niki
Please, I want to expand the wiki so it is a good starting point and knowledge base for new users and people unknow to flashing and updating.
FatalZero said:
I'm currently working/writing for the Wiki.
Thanks
Click to expand...
Click to collapse
Good news !!! Thx
Is there really no one who cares about the Wiki
You do a great job! I just miss a link to the cube customization thread. beside of that i have no idea to improve it.
how about a decent explanation of the different types of spl and what they would be used for, also a list of any settings you would net to take a note of before flashing a new rom, eg server settings for mms,
Hi been looking everywhere on this site and all over the net and I cant really find any themes that fit my samsung omnia which has wqvga resolution. Can someone please help me find some as I really want some of the really good themes on this board but I dont know which ones fit wqvga.
thanks
Hello my friend :]
These are some themes specially designed for samsung omnia that
Supports Resolutions:
QVGA (240x320)
WQVGA (240x400)
VGA (480x640)
http://www.imarche.net/omnia/
===================
Installation Instructions:
-------------------------
1) If you haven't installed mobile shell before, skip to step 2.
Run UnInstall.mscr to REMOVE the previous version (this will completely remove the
'SpbMobileShellSkins' folder from your "My Storage" / "Storage Card".)
2) Extract the .zip file into the root of your desired storage location.
3) Using your device, open File Explorer and find your desired installation
location (as above). Go to 'SpbMobileShellSkins\Scripts'. In here run the
file 'Mortscipt.exe'. This will enable the other scripts to run.
4) In File Explorer, run the file "Install_WQVGA.mscr"and set your LANGUAGE.
5) You will notice 28 other scripts like Luna_Paper.mscr. Each time you run
one of these, when you go to SPBShell/Programs/Tools/SBP Skins a new skin
will become available. If you want all 28, then run all 28 scripts.
Check the website for screenshots.
6) SOFT RESET the device or run the script "ScanStatus.mscr".
Having trouble?
- If all goes wrong, or you don't like the new skins, you can revert to
the original skin by running the 'Orignal.mscr' script!
- If the link into the Spb Skins sub-menu doesn't work, CREATE IT AGAIN
tapping on the relative .mscr script from the Scripts folder.
==========================================
TIP : you can perform a system format incase something goes wrong with your omnia by switching the phone on while holding both call and end call . This will allow you to format the device and go back to initial setting like the first time you switched your omnia on.
ok thanks but how come all the people on here that are making class themes dont make em for wqvga aswell?
first: a skin for what ???
second: omnia is new and the only phone with that resolution and making a skin needs many days of work. so why should anyone do that for one percent of the users for free?
first: why are u having a go im only askin
second: the phone has been out for months and this is a place littered with wm themes so im askin if theres any for omnia and why there isnt
third: get over yaself
whats your problem ?
i just asked you for what application you want a theme/skin because you wrote nothing about it. and then i answered your question why there aren't so many out. so please dont post here anymore if you have a question or need help noob.
bad..
the first three posts and what an awful behaviour....
First while there is a wealth of WM information on this forum just remember at the end of the day this is a HTC Forum, not a Samsung Forum.
With that said, I'm a omnia user as well and I would suggest you check out some other forums like Modaco as they have a specific forum for Omnia and you will find more information you might be looking for there.
There will be some discussion on xda forum and I make it a habit to keep in touch with several forums as to broaden my knowledge base.
bobsbbq said:
First while there is a wealth of WM information on this forum just remember at the end of the day this is a HTC Forum, not a Samsung Forum.
With that said, I'm a omnia user as well and I would suggest you check out some other forums like Modaco as they have a specific forum for Omnia and you will find more information you might be looking for there.
There will be some discussion on xda forum and I make it a habit to keep in touch with several forums as to broaden my knowledge base.
Click to expand...
Click to collapse
Hi friend, which one is newer H1 or G4?
And if you could spare a moment to tell me abt the difference/improvements of the SW.
Thanks in advance
Juan83 said:
Hi friend, which one is newer H1 or G4?
And if you could spare a moment to tell me abt the difference/improvements of the SW.
Thanks in advance
Click to expand...
Click to collapse
The H1 is newer, but HI3 is the latest with many improvements see here:
http://www.modaco.com/category/342/i900-omnia-http-i900-modaco-com/
hi
thanks for that, but my omnia doesnt seem to be able to actually apply the settings.
would u know why it would be doin that?
thanks
http://www.modaco.com/content/i9x0-...e-dialer-pin-dialer-taskbars-wmp-player-more/
http://www.modaco.com/category/342/i9x0-omnia-http-omnia-modaco-com/
http://www.modaco.com/content/i9x0-omnia-http-omnia-modaco-com/275395/new-customized-omnia-menu/
Hi everyone, due to the number of request we have made something special, CleanEX based universal roms.
Please come and look at our thread!
http://forum.xda-developers.com/showthread.php?t=656835
we dont want to duplicate the thread here as that would be very diffucilt to maintiain two identical threads, hopefully a moderator will come up with a better cross-forum solution for us.
Anyway, we would appreciate some feedback please !
Please keep all comments in that thread, not here, thanks!
Gavin + the CleanEX UDT team
little bump
Tried this, so far working great... I just wish you left access to the advanced connection settings ( i think that was it) so i could disable the HUSPA settings because if I do my network stops working randomly. (just the area I am in)
Besides that, this is one fast ROM! So far stable.
you can disable HSUPA / HSDPA with a reg edit, i will find the key for you
nvm ......
Ah no key? hahah... okay i'll take a look around... that's the only issue i'm having with this rom, besides that it's Steller!
hi everyone )
i have posted a new beta rom in the main thread (link in post 1), last page.
Please let me know ASAP if this one is also functional on your handsets.
Thanks,
G
How would I go about chaning the Icons of the programs? I normally use JWMD Icon Changer but it's not finding the icons you set as the default ones.
Any help is appreciated.
Once again, very very nice ROMS!
in JWMD, click menu - tools - scan unregistered shortcuts (or soemthing like that, the option is somewhere in the program)
Announcement!
New universal bug-fixed roms available in the main thread
g
what are the differences between UDT DsE, UDT HQ, and UDT HyperROM? i tried going through the entire thread but couldn't find what the differences/advantages were to each rom...thanks!
ce_rob said:
what are the differences between UDT DsE, UDT HQ, and UDT HyperROM? i tried going through the entire thread but couldn't find what the differences/advantages were to each rom...thanks!
Click to expand...
Click to collapse
its all laid out on the first 5 posts!
by the way, please try the new roms we released today, hopefully should be working for those of you with US HD2s again
let us know, either by PM or posting in the main thread
Thanks,
g
now that i was willing to try one (CleanEX UDT HQ 2.32, non remake / full version) i wasn't able to download it from that other location/host. do you have a direct link to the full ROM and not the remake? thanks!
ce_rob said:
now that i was willing to try one (CleanEX UDT HQ 2.32, non remake / full version) i wasn't able to download it from that other location/host. do you have a direct link to the full ROM and not the remake? thanks!
Click to expand...
Click to collapse
the ftp was having problems, now its fixed. i dont have any mirrors as with only a 40k/sec upload speed i only get once chance of uploading,
but, the rom is accessible now
The new ROM is rockin Guys!!! Super quick, Super Stable and bug free!
new roms being uploaded now which fix the storage size issues (showing 512mb storage for you guys instead of the full 1gb)
i had some ftp issues and had to restart the uploads.
the new HQ roms will be up in-
WITHOUT version - 25 mins
WITH version - 60 mins
Pongsters HyperROM is also going to be updated with the new fixes within 12 hours
DsE editions withing 24 hours
the rom seems smooth, but i'm having an issue with trying to install a cab that creates slider transparency. i actually noticed i couldn't overwrite anything in the windows folder on the device, did you guys do something with the permissions?
here's the original thread/cab
it's the 2nd link down in the first post under the red writing: For Slider
both new HQ roms are now online
and we have not done anything to windows directory or permissions!
DsE releases are now onlise too post #2
Hey Guys,
Since Android hasn't finished yet i will not switch over yet, and wait wil switching OS.
instead of that i will use an Theme for the TP2. ( co0kies Home Tab )
i found co0kies home tab theme very great, as i searched for further info i found out that i need Manila 2.5 ( 2.5.1920, 2.5.1921, 2.5.1922, 2.5.2011, 2.5.2012 )
Where can i get this? After many hours of searching i found out that it might already be on the phone, but i dont know what version is on it.
can someone help me with this? Co0kie wrote this to find it out.
To check your Manila version: go to the settings tab in Sense, select "About phone", and then "Software Information".
If you have any problems with this mod please report your full Manila version (e.g. 2.5.xxxxxxxx), the device and ROM you are using.
Where is this tab named "Sence" ?
Can't find it anywhere x'D.
So, do i have Manila ?
If i dont, Where can i get this?
If i do, How can i see what version?
And if i found out what version, What is this tab named "Sence"
Another thing is that if something goes wrong, how can i return to the normal WM 6.5 ( NON - MODDED / THEMED )
Also, Last question.
Do i need to flash my phone for this?
Greetings
If you're still on the stock ROM that came with the phone, then you don't have Sense 2.5
The only way to get sense 2.5 in this case is to flash a rom with it. You should be able to get all the necessary information in the rom development forum
THANKS! i will search for this, very usefull !
Sence is the Bar below right? cause at Settings > More > Today > Items i have "HTC Sence" In the list.. and its checked on..
If i have this "Sence" Where can i get the Manila thing?
I found manila.exe in my File explorer\Windows\manila.exe
How can i see the version of it ?
xheroxkefx said:
THANKS! i will search for this, very usefull !
Sence is the Bar below right? cause at Settings > More > Today > Items i have "HTC Sence" In the list.. and its checked on..
If i have this "Sence" Where can i get the Manila thing?
I found manila.exe in my File explorer\Windows\manila.exe
How can i see the version of it ?
Click to expand...
Click to collapse
"Sense" is the entire pretty little graphical interface that you're playing with...the clock, the tabs on the slider, and everything in those tabs, is all the interface that HTC built to go on top of Windows Mobile. HTC has been calling their shell "manilla" for a long time, Sense is just the latest generation of that. There is no "sense tab", and the exact location of where you can see your sense version varies....which carrier's model of TP2 are you using?
However, it's kind of moot...like ctbear said, if you're still running the stock rom, you're not on 2.5 anyway, most likely 2.1, so you'll still need to flash a ROM if you want to use co0kie's home tab
i live in europe, and my carrier is Hi.nl so i dont really know what model im using..
thanks for the information, could you provide me with a link that has the 2.5 rom? i'm so afraid i will choose the wrong one since there are so many around
thanks for the information again!
Hey guys, flashing a ROM isn't the only way to get 2.5 on the phone. I followed the directions in the "Manila Sense 2.5 cab?" thread (forum.xda-developers.com/showthread.php?t=661941) after a Task29 and a couple of hard resets using the stock TMOUS 6.5 ROM...I have 2.5 running fine with the CAB from post #4 of that thread. I put CHT and CHT Editor on and all is well. It's way easier to use a Energy ROM, but I was having problems with messaging and connectivity so I went back to the stock ROM. As I said, all is well...going on the 3rd day with the setup and haven't had any hiccups. No tinfoil hat phantom usage issues, either.
YMMV, obviously.
xheroxkefx said:
i live in europe, and my carrier is Hi.nl so i dont really know what model im using..
thanks for the information, could you provide me with a link that has the 2.5 rom? i'm so afraid i will choose the wrong one since there are so many around
thanks for the information again!
Click to expand...
Click to collapse
If you got the phone from KPN/HI you will have an unlocked TP2 for which you can get the latest Rom on the HTC website. Manillaversie: 2.5.20121225.0 is Sense 2.5. Original Dutch Rom should be 2.07.404.1 NLD.
If you need any more info let me know. You can also send me a Pb in Dutch if that would be easier for you.
ctbear said:
If you're still on the stock ROM that came with the phone, then you don't have Sense 2.5
The only way to get sense 2.5 in this case is to flash a rom with it. You should be able to get all the necessary information in the rom development forum
Click to expand...
Click to collapse
In Norway the TP2 is now coming with Sense 2.5 as standard stock ROM.
To the question, slide the slider at the bottom to right(all the way) then you'll be at the settings tab, follow cokie's instructions from there...
-Sblindheim
You dont need to upgrade your rom to get Sense 2.5...
dwizzy130 said:
Look here http://forum.ppcgeeks.com/showthread.php?t=108707
It can be done.
dwizzy130
Click to expand...
Click to collapse
I myself havnt tried it as I DO flash roms. However, Xhero doesn't seem to know much about anything on this phone... nor to use the search feature... nor how to use google and search "The difference between Manilla and sense" Soooooo I wouldn't recommend flashing a phone just yet to him/her.
Xhero... do your reading.. LOTS of it before you start trying to customize your phone. You dont want to screw it up and then have to come back and start a new thread asking how to hard reset your phone... Please please learn how to search the forums too. The best advice that can be given to a new user. If its too difficult to use that search key in the top right of EVERY page on every thread on XDA then in google search what you are looking for and type "XDA" after it..... ie.. "Manilla 2.5 install cab XDA" or something like that and Bingo Bango you'll be brought to the thread!
A little research and common sense goes a long way. Have fun with your phone and remember to post relevant questions in the appropriate threads and you'll likely get your answers super quick!
I have allready guided him to the correct Romupdate from HTC. Yes there are other ways of getting Sense 2.5 but this is now the easiest way for him to obtain it.
In the Netherlands the TP2 is also now being shipped with Sense as I got mine last Saturday with the new Sense on there.
Hi all!
I've searched and dug, I've used the forum search as well as google with operands, I've searched sites other than XDA and come up with nothing.
What I want to know is, somewhere, is there a list of the packages with their descriptions? I'm new to cooking (As in two days new!) and after receiving no help in trying to learn from a tutorial, I was forced to guide myself.
While using a kitchen, I'm presented with the SYS packages which all come with nice descriptions telling me what they are, and then I can choose whether or not I need them. The EXT packages however do no such thing.
There are a few which are obvious, such as the first on my list, "Advanced Network v1.0.9.0". This is obviously the software for the advanced network settings under control panel/connections.
Not all EXT packages however are so obvious, and attempts thus far to identify them have failed
So, I wanted to ask whether or not there was a listing, partial, complete or in the making, of the standard and regularly included (Stock) EXT/OEM packages for the Touch HD.
Thanks!
BarrettBear said:
Hi all!
I've searched and dug, I've used the forum search as well as google with operands, I've searched sites other than XDA and come up with nothing.
What I want to know is, somewhere, is there a list of the packages with their descriptions? I'm new to cooking (As in two days new!) and after receiving no help in trying to learn from a tutorial, I was forced to guide myself.
While using a kitchen, I'm presented with the SYS packages which all come with nice descriptions telling me what they are, and then I can choose whether or not I need them. The EXT packages however do no such thing.
There are a few which are obvious, such as the first on my list, "Advanced Network v1.0.9.0". This is obviously the software for the advanced network settings under control panel/connections.
Not all EXT packages however are so obvious, and attempts thus far to identify them have failed
So, I wanted to ask whether or not there was a listing, partial, complete or in the making, of the standard and regularly included (Stock) EXT/OEM packages for the Touch HD.
Thanks!
Click to expand...
Click to collapse
IMHO try to PM some of the known cooks from this thread(or others) to help you: it might be the most successfull way to get yourself a cook sooner!!!
Success!
Thanks for the post bib*oops, but I'd already considered that.
I'd prefer it if the information was put into this thread, that way, even after I've used it, other people who want to cook their own roms can figure out just exactly what they have in it, so they can remove, or add SYS packages based on what they need.
I'm probably not the first, nor will I be the last person to need this information. Better than it is available in one post than people making new posts with "What is the XYZ package & what does it do?"
BarrettBear said:
Thanks for the post bib*oops, but I'd already considered that.
I'd prefer it if the information was put into this thread, that way, even after I've used it, other people who want to cook their own roms can figure out just exactly what they have in it, so they can remove, or add SYS packages based on what they need.
I'm probably not the first, nor will I be the last person to need this information. Better than it is available in one post than people making new posts with "What is the XYZ package & what does it do?"
Click to expand...
Click to collapse
I see... Good idea , so far!
Unfortunately all I can find is reference to some packages on the other sub-forums, not for the Blackstone >_<