Hi,
any 1 can help me please........
Last time i upgrade my XDA with PPC 2003 from this website, isntallation was successfull. But i get problem to back my PPC2002.....the bootloader can't be access...or gone....Somebody tell me to use adaptrom and i tried put adaptrom on my original program A and i run dos bacth file and its work like usualy, but after upgrading menu show my xda screen become white after that show warning on my PC "ERROR PORT" it means the pc can't connect with my XDA.......please somebody in this world help me out from this problem.......sorry i have bad english i hope you understand what i mean.
Thanks
i upgrade my mobile (Qtek 1010) to new rom but now i have many of problimes and i want back to my origenal rom----how???
please in steps
every time when i am trying to make upgrade for rom give me message
error 011: execute remot communication programe error
cannot rxrcute the remot communication programe please make sure the usb-serial cable is properly connected
put every thing connected and work well why give me this message just when i want make upgrade
please help me
Ever tried searching in the forum?
Some ROMs (especially the T-Mobile) prohibit flashing via exe file. You have to flash your device via sd-card...
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Stefan
but my mobile work and
i am trying to click in the screen but didnt do any thing click 9 give me 0 there is something happend
Go to settings/system/screen. Run the screen alignment procedure.
i cant go to setting or any where
If this problem still exists after a hard reset, then i would say, is the digitizer malfunctioning.
I think you have to rpelace the device.....
Stefan
http://forum.xda-developers.com/viewtopic.php?t=10550&highlight=alignment
Try that and see if you can align from there.
Hello,
This is my first post on this forum.
Im new to the Pocket Pc's. I got this T-Mobile MDA II from my friend 2 days ago and that was the first time in my life when I touched the PPC.
I have a big problem.
MDA II is not reading the SMS (''the phone is not ready, try again in 15min'').
And another problem is GPRS. MDA says ''connecting'' or something like that, and nothing happens.
The PPC is from Germany, and I live in Croatia. And the language is in English-Germany.. Something is on English, something on Germany.
Can someone explain what's the problem ?
And another question
I download the WM6.1 AKU1.0(build 19199).
I can't get to the Bootscreen mod, I click the middle navigation button, then power button and nothing happens.
And where is the reset button ?
Sorry for my stupid questions and bad english.
But I need some help.. Please!
Please!
I need someone to explain how to install ROM on MDA II.
the reset button is on the left of the charging block ( tiny hole )
follow these instructions
Start your device in bootloader mode by pressing and holding down:
DPad + PowerButton + ResetButton
After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.
Place your device in the cradle, ensuring that the cradle
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle.
It is also a good idea to disable any screensavers on your desktop PC.
Once your device is cradled, the text on the screen will change to "USB".
Run HimaUpgradeUt.exe
Sit back and wait for the Congratulations screen to be displayed
on your PC. Your device will still be displaying 'Upgrading ROM Image, please wait....',
but as long as the PC says it is done, then its all OK.
Detach your device from the cradle.
Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
===========================================================================================
PS: Upgrade on your own risk
omg this is amazing...
ather90 thank you very much!
6.1.1a16CS (WM6.1 AKU 1.0) ROM is great.
I can now use my camera, use gprs, use internet..
Wonderfull
good that you finally succeeded. now try 6.1.1b16CS (WM6.1 AKU 1.0)
usb craddle or usb sync cable ?
Since this seemed a newbie type post i thought i would continue with a Newbie type question.
I also just purchased an Qtek 2020 and wondered if i need the usb craddle or would a usb sync cable do for rom upgrade.
Rom Ver : 1.72.00WWE
Rom Date 03/15/04
Radio Ver : 1.17.00
Protocol version 1337.28
ExtROM Ver : 1.72.181
Thanks Hagisbasheruk
hagisbasheruk said:
Since this seemed a newbie type post i thought i would continue with a Newbie type question.
I also just purchased an Qtek 2020 and wondered if i need the usb craddle or would a usb sync cable do for rom upgrade.
Rom Ver : 1.72.00WWE
Rom Date 03/15/04
Radio Ver : 1.17.00
Protocol version 1337.28
ExtROM Ver : 1.72.181
Thanks Hagisbasheruk
Click to expand...
Click to collapse
This is also my 1st post here. But I'd been monitoring the xda-developer forums for a long time. I spend more time reviewing posts rather than posting in forums. Anyways I think I can help. Here's the answer to your question: http://wiki.xda-developers.com/index.php?pagename=HimalayaBootloaderSdCardFlashing. You can also use the search function provided by this website to search for topics that you need.
Thanks for the link which lead me to bootloader info below
"you can connect to the bootloader, either via a serial cable, and use a terminal program like hyperterm. or via usb, and use mtty. make sure you have disabled the serial or usb connection in activesync, before trying to connect to the bootloader."
So i am guessing its both USB CABLE or USB CRADLE got i just purchase one on Amazon for 90 pence
i tried to bootload my xda and it keeps bringing me to the windows mobile screen with no serial words on top...
i have a o2 xda mini that runs WM2003 SE and would like to upgrade with the WM6.. is it possible??
can someone please help
thanks
g_spot said:
i tried to bootload my xda and it keeps bringing me to the windows mobile screen with no serial words on top...
i have a o2 xda mini that runs WM2003 SE and would like to upgrade with the WM6.. is it possible??
can someone please help
thanks
Click to expand...
Click to collapse
here are the XDA mini s WM6 pages http://forum.xda-developers.com/forumdisplay.php?f=356
Hello guys,
I have a problem. My p3300 does not connect through Active Sync.
Its everything oright, and with my S200its orght.
The rom is not the original, is a WM 6.1
Is possible that exist some sort of problem with that rom that doesnt connect with the pc, or is the phone USB port (it charges, but don't comunicate).
How can i change the rom, without been with active sync?
I have a SD 2gb card, but i can't make a partition on it, and make a SD Flash. :S
Can anyone help me?
Thanks
de-install activesync
download and install the latest version of active sync
make sure that on the conncetions tab the USB connection is tabbed
goodluck
Hey there, and thanks,
I have already make that, and still nothing.
Reinstall the A.S. 4.5, soft reset the pda, and reconnect, restart the pc and still nothiing. :S with my S200(prophet) don't have any problem. :S
More help required :S
tnx
I have the same problem i cant sincronize the pda whith the activesync and i wish to change the rom. Now it's in france and i wish to change it to english, and it's locked to orange france i think. What can i make? It starts in bootloader, but the instalation from the card is not starting. thankx
le. and if i want to install something gives error 260
hm. well to get back at you thinking it might could be your rom, i dont think so.
did u test the usb cable?
did u test it on another pc?
...
quick question...
does it charge?
(i know sounds daft..but...)
or have trouble charging sometimes?
it could be the pins not connecting properly on the device to usb..
*______
/ . == . I
look at device, turn it upside down, now look at the charge slot on device..
Imagine the little picture iv drawn is the charge slot on the device..
''.'' are the ''pins'' on the device..
get a pin and sprize/pull them out SLIGHTLY..
the ''pins'' are hard to see but this could be the problem..
* my p3300 stopped charging, activesync, the lot.. this is MY quick fix!
(hopefull yours too!)
lol
vrumvrum said:
Is possible that exist some sort of problem with that rom that doesnt connect with the pc, or is the phone USB port (it charges, but don't comunicate).
Click to expand...
Click to collapse
just give it a try.. i now know it charges tho.lol
Yes it charges, and i tryied another pda to connect to this pc and it works fine, i changed the mini usb connector, because it was broken
mvenneker said:
hm. well to get back at you thinking it might could be your rom, i dont think so.
did u test the usb cable?
did u test it on another pc?
Click to expand...
Click to collapse
Hello,
Yes, i tested with other pc (4 pcs in total), and the P3300(artemis) isn't recognize by Active sync, but it charges through the usb, but with my S200(prophet) don't have any kind of problem, and connect a Razr X (motorola) to test the cable to and keep working to, so the problem is in the phone.
I tried to clean the conector and all usb contacts still in place and working (have te 5 pins and they move up and down, normally)
in bootload mode it recognize by apearing in the bootom left the USB indication, but have the 260 error in everyway i try to connect the phone to pc.
any help?? :s
Thanks
...
try this out for now..... just try it...
* disconnect the device from pc..
* hard reset the device..
* reinstall active sync..
* turn pc off and then on again..
* reinstall active sync..
* turn pc off and then on again..
- when the pc has fully start up..
* connect device..
* i know you already said you have tried uninstalling activesync and reinstalling it but just try it again but this time reseting your pc once its uninstalled.
...
download this..
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/activesync-download.mspx
raving_nanza said:
try this out for now..... just try it...
* disconnect the device from pc..
* hard reset the device..
* reinstall active sync..
* turn pc off and then on again..
* reinstall active sync..
* turn pc off and then on again..
- when the pc has fully start up..
* connect device..
* i know you already said you have tried uninstalling activesync and reinstalling it but just try it again but this time reseting your pc once its uninstalled.
Click to expand...
Click to collapse
Hy there, i done it more than 5 or 10 times in the 2 home pc's. and nothing.. been the same.
raving_nanza said:
download this..
microsoft.com/windowsmobile/en-us/downloads/microsoft/activesync-download.mspx
Click to expand...
Click to collapse
Hi there,
I have already download the most recent version (AS 4.5), 3 times, and reeinstaled more than 5 ou 10 times, on the office pc, and home pc's.
It's still the same, no connection or syncronising :S
Don0t know more what to do.. :S
...
if that does not work, i dont know what it can be.. sorry mate, if i find out why its not connecting ill let you know..
Just an idea.
On your device (not on PC)
Go to Start->Settings->Connections->USB to PC and change the setting (tick or untick the extended network option)
BR
Scootie
scootie said:
Just an idea.
On your device (not on PC)
Go to Start->Settings->Connections->USB to PC and change the setting (tick or untick the extended network option)
BR
Scootie
Click to expand...
Click to collapse
done and nothing, it still the same.. :s
but thanx anyway
regards
Have you try Hard Reset ?
Hi,
My first post here and try to help !
Do you know how to hard reset your Artemis ? it has works for me one time with the same problem...
But you have to save ALL your data first and reinstall everything after...
(you will find in the forum if you don't know how to hard reset)
Good luck !
i don it a couple of times, with no sucess. :S
I tried to flash a new rom throught the SD Card, but with no sucess to..
i download several ones, and keep to tell that its a invalid certificate, and tried othr been from HTC, tht dont do anything, pass directly to the 3 color bar menu. nothintg more hapend.. :S
If it help.. :
Rom version Touch_AF pTG - WM6.1
radio version 02.94.90
OS: 4.1.0.7
IPL:3.13.0001
SPL.3.13.0000
Cheers
Wrong SPL I think...
It help ! But I think it's not a good news...
It seems that you haven't CID unlock your device before flashing a new ROM... but you need to have a good working active sync connection to do it !
see : artemis USPL in the forum or artemisUSPL_nosize (i cant' post url)
(with the second one you can flash any ROM size without any problem)
Maybe if you find a way to do it with SDCARD, you will be able to flash a new ROM, but maybe you have a hardware failure...
Castorlama said:
It help ! But I think it's not a good news...
It seems that you haven't CID unlock your device before flashing a new ROM... but you need to have a good working active sync connection to do it !
see : artemis USPL in the forum or artemisUSPL_nosize (i cant' post url)
(with the second one you can flash any ROM size without any problem)
Maybe if you find a way to do it with SDCARD, you will be able to flash a new ROM, but maybe you have a hardware failure...
Click to expand...
Click to collapse
Hi,
but theres my problem.. i dont have a working A.S. connection between the phone ad the pc. :s
most probably is the rom that don't communicate with the computer, because it charge, so the usb is ok. :s
ill try through Blue ttooth to syncro the Uspl, and then try to change the rom through sdflash.. i'll pray to God to this work..
Hi, sorry, my english is very bad... So I update my pocket PC witch "Xda_II_172181_Final" of forum.xda-developers.com/showthread.php?t=229259 . And now it's dead because obviously lost connection with PC. My PDA shows Serial at the top and v 1.01 below. When I put it in the cradle, it displays usb at the top and v 1.01 below. I keep trying the reccord button, power, and hard reset but it nothing happen Plyzz help me.
Serius said:
Hi, sorry, my english is very bad... So I update my pocket PC witch "Xda_II_172181_Final" of forum.xda-developers.com/showthread.php?t=229259 . And now it's dead because obviously lost connection with PC. My PDA shows Serial at the top and v 1.01 below. When I put it in the cradle, it displays usb at the top and v 1.01 below. I keep trying the reccord button, power, and hard reset but it nothing happen Plyzz help me.
Click to expand...
Click to collapse
Don't be panic man just follow the below steps and your device working like charm
It is actually the disconnection error
1 - first fully charged battery.
2 - install mobile device center or active sync ( as per your OS )
3 - Enter in to the bootloader mode
4 - connect USB cable with ppc device.
5 - wait for detection of the device
6 - drivers are automatically installed if you are using windows7 it shows
driver installed successfully & device is ready to use.
7 - extract the rom update utility from the posts whichever you like ( remember choose it carefully as per your device )
8 - just double click on upgrade icon in extracted folder and yeah you done.
if still any problem persists then fell free to contact me on [email protected]