Database Users

After mtty...doenst start

I made a bad command on my Cruise...
post 2a
and after this now Cruise doesnt start and if i push all buttons nothing happend.
Any solution?
Thanks

tried a hard reset yet?
And what bad command did you gave?

ehm...
Doesnt start, no light, dead.
If i press soft reset, hard reset or boot procedure... no live.

Did you retry with the correct commands ???
Why did you use Mtty ???

You bricked your Polaris, that's all.
Ti rispondo anche in italiano;
Con quel comando hai ucciso il tuo Polaris, devi mandarlo in assistenza sperando non si accorgano del danno che hai fatto o ti faranno pagare un sacco per la riparazione.

udK said:
Ti rispondo anche in italiano;
Con quel comando hai ucciso il tuo Polaris, devi mandarlo in assistenza sperando non si accorgano del danno che hai fatto o ti faranno pagare un sacco per la riparazione.
Click to expand...
Click to collapse
means:
With that command you killed your Polaris, you must send in assistance, hoping not aware of the damage you've done or you will pay a lot for repair.
I love Google translate

Omnia Brikkato dopo aggiornamento Cooked Rom Italiana

Ciao ragazzi...volevo sapere se qualkuno di voi sa aiutarmi...è la seconda volta ke brikko l'Omnia(nn so xk ma kapita solo a me) dopo un'aggiornamento. Questa volta stavo installando una Cooked Rom Italiana con Grand Prix...Tutto l'aggiornamento è andato bene xò alla fine il terminale si riavvia e nn si riaccende più... se premo il tasto di accensione nn si accende neanke quello... xò se collego l'Omnia al pc me lo rileva come periferica Monahans...e cerca di installarlo...spero ke qualkuno di voi mi sa aiutare... anke xk nn vorrei rimandarlo in'assistenza xk l'ultima volta se lo sono tenuti un mese....
Grazie a tutti quelli ke mi aiuteranno!

english language?

pluccio said:
english language?
Click to expand...
Click to collapse
Sorry my Bad English
Hello boys… I wanted to know if someone of you knows to help me… is the second time that brick l' Omnia (nn I know because but it only happens to me) after un' modernization. This time I was installing a Cooked Italian Rom with Grand Prix… All l' modernization has gone well but at the end they finishes riavvia and nn more is relit… if I press the ignition key nn ignites not even that one… but if I connect l' Omnia to the PC finds as peripheral Monahans to me… and tries to install it… hopes that someone of you knows to me to help… anke because I would not want to send back it in attendance because l' last time if they are held it a month…. Thanks to those which they will help me!

alfagi said:
Sorry my Bad English
Hello boys… I wanted to know if someone of you knows to help me… is the second time that brick l' Omnia (nn I know because but it only happens to me) after un' modernization. This time I was installing a Cooked Italian Rom with Grand Prix… All l' modernization has gone well but at the end they finishes riavvia and nn more is relit… if I press the ignition key nn ignites not even that one… but if I connect l' Omnia to the PC finds as peripheral Monahans to me… and tries to install it… hopes that someone of you knows to me to help… anke because I would not want to send back it in attendance because l' last time if they are held it a month…. Thanks to those which they will help me!
Click to expand...
Click to collapse
http://www.modaco.com/content/i900-omnia-http-omnia-modaco-com/274945/i900-monahans-repair-info/

exscuse me but i don't speak english very well

http://forum.telefonino.net/showthread.php?t=486403&page=2
have you visited this site?

Well it seems to be an english speaking site, so speaking english would be better =) and try to find an omnia forum not an htc one. Btw try using google translate, perhaps it will make your speach more readable.

I have the same problem....any one have solved these problem?
Thanks
Antonio

FRONT KEYS DON'T WORK (sometimes...)

Hi to all, I'm new on XDA, I've tried to search for my problem but I didn't found anything...so I hope not to say anything already said.
Since few days, the front keys on my TyTN gone mad!
Let's get through:
I was answering to an incoming call, and the green button didn't work. Then, in normal use of the PPC, I noticed that even the other keys stop to work. I soft-resetted the PPC, and the keys apparently restarted to work, maybe not at all, maybe all.
After, the problem reappears. The keys worked for a moment, and then they didn't. I tried an HARD-RESET, I flashed a WM6.1 ROM, but I started to think it is an HW problem, and searching on the net I understand this problem is quitly common on Hermes...but NOONE of who had spoken about the problem seemed to find out any solution...
Does anyone here know about this?
Bye bye and thank you anyway
***ITALIANO***
CIAO a tutti, sono nuovo di qui, cercando tra i thread non mi sembra si sia parlato del mio problema e mi auguro di non ripetere qualcosa di già detto.
I tasti frontali del mio TyTN funzionano a singhiozzo.
Da qualche giorno, mentra stavo rispondendo a una chiamata, ho notato che il tasto verde non funzionava. Nel normale uso ho visto che anche gli altri tasti non funzionavano. Dopo un soft reset tutto sembrava essere a posto ma in breve è ricominciato, stesse modalità. I tasti vanno a singhiozzo, ogni tanto vanno ogni tanto no, magari non tutti insieme.
Ho provato un hard reset, a installare la rom WM6.1, ma il problema è persistente. Su internet pare essere una cosa molto comune, ma NESSUNO sembra aver trovato una soluzione efficace.
Nessuno sa qualcosa?
Ringrazio in anticipo,
ciao ciao

hitting the on/off button to suspend it and turn it back on should help. but it wont entirely go away...

Wow...I'm bound to keep my PPC that way ?
Could HTC do anything?

looks like the cords strip of your phone is broken.there is strap cord in the sliding tray after many times of opening closing i meant realy many times it brokes try to go to hardware shop and find the cord strap it will be fine.hope this info will help you to understand your problem and you will stop hitting your head coz this is a common problem with all sliding phones so dont worry find the strap cord if you will enjoye your device again if not find a good buyer who cant see or feel or move or check the phone (it could be the dead one only) and sell it.sorry its just a joke i am having the same phone but since i baught it the shop owner advised me about sliding so i rearly use it thats why i am still enjoying the device.
take care bro

i have the same problem but i can't fix it.
Italiano
Io ho lo stesso problema ma non sono riuscito a risolverlo e a me dava anche lo schermo bianco!!

Trinity va sempre in modalità Bootloader... Trinity that is always in bootloader

Buonasera a tutto il forum...
sono un tecnico informatico ed ho ricevuto in assistenza da un amico/cliente un Trinity che va sempre in modalità bootloader appena acceso...
Il Trinity in questione è originale come rom e tutto il resto...
L'Activesync 4.5 sotto XP SP3 non lo rileva... se provo ad usare l'utility MTTY mi da che non riesce ad aprire l'USB... ho provato diverse volte ad flashare sia l'spl 1.2 che l'1.3 senza nessun risultato positivo... il display del Trinity segnalava l'avvio dell'upgrade ma dopo 1 secondo si riavviava (sempre in modalità bootloader) ed il pc dava file di aggiornamento corrotto...
ovviamente come da FAQ ho riprovato diverse volte ad effettuare questi aggiornamenti ma sempre con lo stesso esito...
Ho provato ad installare direttamente da MiniSD la ROM cucinata con il WM6.1 ma non tenta manco di installarla (ovviamente ho ridenominato il file come TRINIMG.nbh)... provando a fare l'aggiornamente alla ROM originale che avete postato qui (quella da utilizzare per mandare il telefonino in garanzia)... ed utilizzando sempre il metodo della MiniSD mi fa effettivamente l'aggiornamento... ma quando riavvio il telefonino mi va sempre comunque in modalità bootloader...
inutile dire che soft ed hard reset sono stati ampiamente provati...
Come la risolvo questa situazione?
Ringrazio anticipatamente per le Vs. risposte
Francesco Pennelli
Mod Edit:
It is a forum rule to provide an English translation - on this occassion I have done a google translate (next time the OP must provide it)
English
Good evening to all the forum ...
I am a computer technician and I have received assistance from a friend / client a Trinity that is always in bootloader mode just lit ...
Trinity in question is original as the Roma and the rest ...
The Activesync 4.5 under XP SP3 does not recognize that ... if I try to run the utility MTTY me who can not open the USB ... I tried several times to flash the SPL is 1.2 that the 1 .3 with no positive result ... the display of Trinity signaled the start the upgrade but after 1 second restart (always in bootloader mode) and the PC gave update files corrupted ...
FAQ obviously as I try several times to make these updates, but always with the same outcome ...
I tried to install directly from the MiniSD ROM with WM6.1 cooked but not even try to install it (obviously I renamed the file as TRINIMG.nbh) ... trying to do the upgrade to the original ROM that you have posted here (the one to use to send the phone under warranty) ... and always use the method of MiniSD me the upgrade ... but when I restart the phone is always still in bootloader mode ...
Needless to say, soft and hard reset have been extensively tested ...
Like I fix this?
Thank you in advance for your answers

Sorry I didn't noticed the rule about writing the questions in both Italian and English... here is the translation made directly by me about this question:
Good evening to all the forum...
I'm an IT Technician and I have a Trinity of a friendly customer of mine to check... this Trinity is always going in bootloader mode as soon as you switch it on...
This Trinity has the original rom and spl on...
MS Activesync 4.5 is not able to detect it under Windows XP SP3... If i try to use the MTTY utility I receive an "i can't open the USB port" error...
I tried several times to flash both version of SPL... 1.2 and 1.3 ... but I had no positive result... Trinity display show the start of the upgrade process but after 1 or 2 second the device reboot (always in bootloader mode) and the PC utility show the corrupted updating file error... I tried as advised from the FAQ to update again without changing anything... but i had the same result.
I also tried to install directly from the MiniSD both the cooked WM6.1 ROM or the original ROM posted on this forum (i renamed each file to TRINIMG.nbh before copying them to the FAT32 formatted MiniSD)... the update of the cooked one is not even starting... the one of the original ROM arrive until the end without any problem... but when I restart the mobile it keep going in Bootloader mode
I have of course tried to do both soft or hard reset several times...
What I have to do to fix this problem?
Thanking you for your quick reply I await
Francesco Pennelli

Error 270 and ROM HTC Advantage 7500 athena 100

Help me, please, those who have skills to help me step. I recently bought a HTC 7500 Athena avantage 100, used.When turned I saw that the ROM was english.Think that works like a desktop PC I downloaded some ROM from the Internet, and I found a ROM that ended with "Michy." From that moment has been my ruin! When I turn on my handheld htc appears written on a white background and stand still.To load the ROM gives me error 270, image file is corrupt etc etc.In the boot, I tried to reboot, reset but ... nothing! I read 6 thousand forums, including this one, but it seems that the most accomplished is indicated xda develop ... but in English imate !!!!!!!! I tried, nothing, I wanted to try soft or hard SPL and find nothing suitable on the network right in mio.Considerate do not understand anything about handhelds, no nothing, and for me things like ROM ... RUU are Arabic (I just realized that ROM is the operating system). I can not take it to service center, I plucked alive I'm sure ... please help me ... even in pvt (email: [email protected]). Help me really: I have no CD or docking station, no nothing ... if you need to leave my well cell.Ho have also spent money on the site rapidshare but ... nothing! I paid with paypal in a wm Italian ... but nothing came to 100 reboots and gives me error 270. SPL starts with my 1.0 and I do not have the original ROM ... I do not know what to do. when I try to do the upgrade, in that says "From Image Version" do not see anything! It is not synchronized with more activesync.Sono own pieces ... I dreamed of using it and instead.

Help me!!!!!!
Append Hard SPL I downloaded several from this site, but maybe not find one to my palmare.I want even know where I can find a ROM cooked and all the programs fit for my PDA, including a possible guida.cusate for my English but I'm using the internet to translate.The service center has asked me 90 euros for the repair ... I could cry.

Anything help me?!?!??!

you sir, are a failure!
You should had read the "thousands of forums" you implied BEFORE doing anything..not afterward.
Guess you kinda deserve your fate.
Let that be a lesson to you, and your lazyness.

Does anyone know of this comprehensive rispostapiù help me or maybe show me a link where you can go see everything? Dear Member I do not speak English, so do not ask me to read before making cose.Bye

if u can't speak English what's the point of anyone helping you here. Rather save yourself the trouble and payout the repair, and next time, just don't.

repeat the question: Is there someone who knows help me? I hope for a sensible response ... oxid abstain from responding if you do not know what to say, go and get you a ride elsewhere

The details you have given dont really describe the exact problem, try and take some time to translate the exact problem and what you did to create it, I understand you dont speak english, maybe you can find someone on xda who speaks your lanuage and can help you translate.

Ok,scrivo nella mia lingua:Ho acquistato su internet un HTC Advantage athena 100 ad un ottimo prezzo.Quando mi è arrivato a casa l'ho acceso subitissimo per iniziare ad utilizzarlo,ma mi sono accorto che era in inglese.Ignaro ed inesperto di palmari mi sono avventurato su internet ed ho scaricato una ROM in italiano c.d. "cucinata" fatta da un certo "micky".Da allora il palmare mi si blocca all'accensione sulla scritta HTC su sfondo bianco.La cosa peggiore è che non mi riconosce più activesync.Entro nel boot e mi compaiono le 4 linee orizzontali bianca,rossa,blu e verde,e ci sono i dati,credo,del palmare SPL 1.10 e qualcos'altro,SL v.1.0 e poi due volte la scritta AThe 100.Ho provato vari programmi quali,ad es.,mitty (se l'ho scritto giusto),ho provato con il mcaddress,con altre rom.Vorrei provare con l'Hard SPL o Soft SPL ma su internet non trovo nessuno di questi programmi adatti al mio palmare (li trovo solo per il diamond o un certo HTC 3600).Quando provo ad installare la ROM,arrivato a 100% mi si riavvia e mi da "Error 270,file imegine is corrupt".La cosa peggiore,credo,è che quando provo ad installare la ROM dal BOOT,nella schermata inziale quando mi dice che sta aggiornando "From Image…To Image" mentre nella parte "To Image…"mi da sempre qualcosa (anche se poi si riavvia),nella parte "From Image" non dice e non da niente.L'ho portato al centro assistenza ma mi hanno chiesto 90 euro oltre 18 di cauzione,ed ho rifiutato il preventivo.Credo sia un problema semplice,si tratta di sbloccarlo ed aggiornarlo,per questo non voglio spenderci altri soldi,ma non ne sono capace…non è un normale PC e ci vuole qualcuno di pratico.Ho provato a scrivere il problema su vari forum ma nessuno o capisce o mi risponde.Spero di essere stato chiaro nella descrizione del mio problema,e spero davvero di avere una risposta.Adesso il palmare ce l'ha un mio amico ingegnere informatico,spero riesca a sbloccarlo,ma siccome sono 3 giorni che non si fa sentire sono sicuro che la cosa è più complicata di quel che pensavo.Grazie in anticipo a chi mi risponderà e,se il problema sarà risolto,non ho problemi a fare una donazione.Grazie ancora e a presto.

Nasty, having PMS?
OXiD said:
if u can't speak English what's the point of anyone helping you here. Rather save yourself the trouble and payout the repair, and next time, just don't.
Click to expand...
Click to collapse