Its all in the title, everything works fine, fast, good, etc. But the calls are murmered like robotts even when I ran Clrcad. Rebooted a thousand times, im running hspl and flashed LEON rom. Also the speaker is very weal so please help me with that too
BUMP. sorry i need to get an answer please clrcad does not help...
http://forum.xda-developers.com/showthread.php?t=750780&highlight=robotic+sound
Related
Hi,
I have a new-to-me HD2. I've installed HSPL3 from here:
(can't link)
Then I decided to forego up/downgrading the radio for now. I also decided to try and stick with the stock ROM for now.
So I tried the latest shubCraft v1.4d and it wouldn't install.
Tried mattcfroyosense v1.6b and it installed, but it would crash right after bootup..
So then I went to mattcfroyo 1.5b and it seems to work 100%! So happy!
Then I tried to make a phone call. I've only tested by checking voicemail but the connection is like a high-pitch garbled mess. Any clues to trouble-shoot would really be appreciated.
I've only been at this for a few hours -- got my phone yesterday, and to be this close to a fully functional (seemingly stable except for the whole 'phone' thing ) android device is unbelievable. Great community here!
Originally had SPL 2.10.000.
Radio is the original version: 2.10.50.26
(any other details needed plz let me know.)
Check this thread out, it will help. http://forum.xda-developers.com/showthread.php?t=734335
install a cooked rom, this will fix the robotic sound.
try energy rom or chucky rom. but first you have to install HSPL3 or you will brick your phone.
Just received my replacement HD2 and ran Android off my SD card. Got the high pitch squeaky robot voice. Flashed HSPL3 and an Energy ROM and no more Mr Roboto domigato.
Sent from my Nexus One using XDA App
Ok so i have been trolling forums to get this figured out and haven't got there. i am running the stock tmo rom and hard spl 2.08 radio 2.12.50 (was 2.10) downloaded hyperdroid v1.2 and ran it, booted into android and everything was perfect. installed jmz dual boot and it worked also. shut down the phone booted into windows for something cant remember what and now when i boot into android calls dont work, either cant hear anything or hear robo voice. iv tried everything searched in forums and re formated and re installed hyper but cant get it to go away, i really dont want to use a diff winmo rom cus i am not going to use it (plan to just use android) i did notice that when i first ran clrcad i sen somthing pop up but now when i run it from winmo nothing happens as well as jmz dual boot does not work to boot into android even after reinstalling both the app and hyper. my eyes hurt please shed some light...
Seems to be the consensus that the stock rom the reason for the robot voice. clcard does nothing when you press it, it does make the sound work in the android side. All the other things you have seem to be ok
Upgrade your WinMO for FIX
The only way to fix the sound and robot voice is to upgrade your ROM i'm using Energy's TMO Leo ROM by NRGZ28 and HyperDroidV1.2 and I have no sound problems or robot voice.... just upgrade your WM ROM
Energy's TMO Leo ROM by NRGZ28:
forum.xda-developers.com/showthread.php?t=654504[/url]
HyperDroidV1.2 by pongster:
forum.xda-developers.com/showthread.php?t=769026[/url]
This question has been asked MANY times before. A quick search will give you plenty results
The best place to look is here: http://forum.xda-developers.com/showthread.php?t=750780
Thanks for the quick reply's. I in fact spent most the day in this post "This question has been asked MANY times before. A quick search will give you plenty results
The best place to look is here: http://forum.xda-developers.com/showthread.php?t=750780"
Having no luck, i will infact go ahead and flash the energy rom posted by Krazy2pa and see if that works, wich boot loader do you use?
Sofwhitewolf said:
Thanks for the quick reply's. I in fact spent most the day in this post "This question has been asked MANY times before. A quick search will give you plenty results
The best place to look is here: http://forum.xda-developers.com/showthread.php?t=750780"
Having no luck, i will infact go ahead and flash the energy rom posted by Krazy2pa and see if that works, wich boot loader do you use?
Click to expand...
Click to collapse
Honestly bro, don't know if my situation is any differnet than yours, but I also have a TMobile HD2, and the robot voice situation was resolved by flashing a differnet radio. Although I am using 2.12.50.02. (Same one as you maybe?)The only thing solved by flashing a different rom was sleep of death.
So i flashed the energy ROM and so far all is well, is there a way to set it up to auto load android? so i dont have to deal with winmo? i know i know but i dont have the money for a vibrant lol
Something strange happened....
Ok so I'm running FroyoStone V2 with Chuckydroid ROM on Radio 2.12... and I've not had robot voice. But then earlier today my friend called and...ROBO VOICE! So I rebooted and it was gone. Just a bit strange is all that it popped up at random.
ok well i just put the FroyoStone with HTC Sense V2 - Release Date: 02.Sep.2010 on my HD2 and it works just fine but i do have a problem with making calls like it freezes and crashes the caller app. its not a problem with the radio i dont think so but does anyone can help me with this? i used the searched but could not find anything but problems with radios. so i would greatly appreciated
daniel18616 said:
ok well i just put the FroyoStone with HTC Sense V2 - Release Date: 02.Sep.2010 on my HD2 and it works just fine but i do have a problem with making calls like it freezes and crashes the caller app. its not a problem with the radio i dont think so but does anyone can help me with this? i used the searched but could not find anything but problems with radios. so i would greatly appreciated
Click to expand...
Click to collapse
What radio are you using and did you run CLRCAD.exe?
Radio versions are responsible for almost every problem running android on HD2. You should really upgrade to version 2.12 and compare. Also try upgrading your winmo rom to one of the other winmo rom's on the this site, since they tweak and change minor things which may have an impact. I use ChuckyROM, which is nice because it has a cool loader for launching android with the click of a button.
What are some reliable radios yall recommend to use and I have a cooked winmo Rom already but I can do everything on the Android but make a call I can receive text emails and surf but can't make calls :/
Like the above poster already suggested, use 2.12. This is the newest radio. It works great for me.
I am using radio 2.15.50.14 and cannot get android to run
I run HARET and it shows a couple of lines of code, then within 3 or 4 seconds of running it, I get lots of static horizontal white lines and the device basically bricks and I have to remove the battery.
Any ideas?
markish99 said:
I run HARET and it shows a couple of lines of code, then within 3 or 4 seconds of running it, I get lots of static horizontal white lines and the device basically bricks and I have to remove the battery.
Any ideas?
Click to expand...
Click to collapse
I had this same problem when I first started reading about droid on HD2.
Make sure you flash your phone with HSPL and make sure you format your memory card as FAT32.
problem calling, american suffix added
hi,
i have recently upgraded my hd2 with the latest winmo (oct 2010) and install Android 2.2 with sense. that works fine, but i have sometimes a problem when i'm trying to make call, the phone add automatically the usa suffix to my number :s
example if i try to call a 06xxxxxxxxhe will try to call the 00106xxxxxxxx.
can someone please help me to resolve that.
thank you very much.
hi,
i have succesfully boot android to my hd2, but when i turn my phone off and turn it on it starts with my standard rom (winmo 6.5)
can somebody help me?
thanks!
Maybe you didn't you understand that its the way it should be ?
You have installed a SD build, which means your WM 6.5 ROM has not been touched in any way, and everytime you reboot then your phone will boot in WM first.
By the way, this is a great advantage of SD builds, because if anything goes wrong in Android, you can quickly go back to WM.
Fortunately, you can automate the work to restart Android at each boot by installing an app like EBL (Exceller boot loader). Search here on xda, or google it for more information.
Ok thanks for the reaction,
I have one problem. When i turn on the music on my phone, it's going faster than normal. I have read some things, but it stil there.
My radio version is now: 2.10.50.26
hi plz help
hi
I have a problem when i tried to run android on sd card the problem in the voice of the call whatever the win rom is or the radio i still have the same machine like voice on the call sooooooo plz plz can any on help me
hi
i have htc hd2 windows mobile im convert it to android 2.3.2 but i have some problem with dealer and it frozen when im make call and say forced close pls help me soon thnks alot.
@castro2020
More details please (NAND or SD, kernel, radio version…). Some apps like Viber or Shazam can cause this issue after using them.
I switched through WinMo roms, Android roms, radios, and launchers and this one problem still remains. Audio will work after I reboot the phone but will stop working after I get that first notification or call, can't make calls because they can't hear me and I can't hear them. I've searched everywhere for three days and I work nights so I'm getting sick of this, someone please help me out. I tried the CLRCND or w /e thing manually too and the same thing happens. Thanks guys!
BUMP- Still can't find anything.
ROM- Hyperdroid V1.2
WinMo- Energy
SPL- 2.0.8.50.05
RADIO-2.12.50.02_2
BOOTLOADER-JMZ ANDROID
test OzDROID rom
i have this problem with Energy rom
Will do, I did it manually again and its working sofar, so I guess it was energy the whole time: p so what's the right way to change the winmo Rom? Don't remember how I did it b4 lol. Thanks!
First let me take the time and express my thanks for the developers/brilliant minds who made android on the HTC HD2 possible thanks so much ...
Now onto my issues well ive installed mattc 1.8 with radio 2.14.50 and i formatted my SD card before hand and followed the guide to a teeth.. But no matter which version ive loaded so far or radio i have tryed thus far i keep having the issue with phone calls incoming and outgoing.
with my last install "mattc 1.8" i was able to make one call but had the robot voice then i get a error stating somethng phone related wont work honestly the rest of the OS performs great so if i could resolve teh calling issue id be set any help would be appreciated here is some more information i have attempted..
radios ive tryed:
2.12.50
2.8.50
installs:
froyo 2.2
shubcraft v1.5
Hyperdroid 1.6
thanks in advance and sorry this had to be my first post
I suggest you do a task29 to your device, flash a new radio, flash an android-friendly rom (chuckydroid for example) then format your sd once again and go with the most recent build available.
I believe your problem may lie with the rom. It is the one part of this equation that you did not mention in your post.
polo735 said:
I suggest you do a task29 to your device, flash a new radio, flash an android-friendly rom (chuckydroid for example) then format your sd once again and go with the most recent build available.
I believe your problem may lie with the rom. It is the one part of this equation that you did not mention in your post.
Click to expand...
Click to collapse
by rom you are you talking about WM rom if so is that what i must SPL in the phone first ill give it atry thanks any other advice or links/guides.
2jztank said:
First let me take the time and express my thanks for the developers/brilliant minds who made android on the HTC HD2 possible thanks so much ...
Now onto my issues well ive installed mattc 1.8 with radio 2.14.50 and i formatted my SD card before hand and followed the guide to a teeth.. But no matter which version ive loaded so far or radio i have tryed thus far i keep having the issue with phone calls incoming and outgoing.
with my last install "mattc 1.8" i was able to make one call but had the robot voice then i get a error stating somethng phone related wont work honestly the rest of the OS performs great so if i could resolve teh calling issue id be set any help would be appreciated here is some more information i have attempted..
radios ive tryed:
2.12.50
2.8.50
installs:
froyo 2.2
shubcraft v1.5
Hyperdroid 1.6
thanks in advance and sorry this had to be my first post
Click to expand...
Click to collapse
I used the radio 2.12 for a while. Suddenly i got problems. Tried another Winmo Rom and Android builds. Nothing helped. Then i changes to radio 2.10 and suddenly everything was working. So you can try switch to radio 2.10