Database Users

Verizon VX6900

So, i got a 6900, and all is well, but i havent the foggiest idea how to edit the city i live in. I live in a the country and it wont find my city. Even when i add it to the XML file, it doesnt find anything. This may not be the right place to post, but i have been using the 6800 (and cooking alot) so, i'm a charp guy with these things.
and yes, i did a search but didnt find anything
EDIT : CANCEL THAT....it was on the 3rd page... ugh! curses!!

Check out the HHC (HTC Home Customizer) It'll help you out more prob.. if you haven't already

Well I installed the HHC Customizer version 1.0 from pocketemu without any issues onto device memory and when I ran the program I got the following error:
An unexpected error has occurred in homcust.exe.
Select Quit and then restart this program, or select Details for more information.
The system cannot find the file specified.
homecust.exe
FileNotFoundException
at
OpenNETCF Drawing, Imaging, ImagingFactory, CreateImageFromFile().....etc...
So, I thought...maybe I need something else...well I got the cab from the same site for NETCFv2.wm.armv4i.cab and it doesn't install. I get a message that a newer version is already installed.
Any help will be appreciated. This is a brand new vx6900 from verizon with nothing else installed except what I tried above.
**** UPDATE ****
I fixed this issue by re-doing the whole installation again. Here is how I did it:
1 - I installed HTC Home Plugin v2.1 (hermes version) from pocketemu.com <downloads section>
2 - reset
3 - I installed HHC (Home Customizer v1.0 (Final version) from pocketemu.com <downloads section>
4 - reset
All good!!!

how is yuour 8gb card working in the 6900?

Gyrator 2 application ...error?

Ok so i have a dilemma....
i installing the 3.5 .net framework perfectly on my phone it says it was succesful while using activesync the whole jazz
but even when i try to run gyrator 2 it still comes up as this
Error
an unexpected has occured in Brins0net_ScreenRotator.exe
Select Quit and then restart this program, or select details for more information
....
ive tryed to uninstall it, re install it again
ive also cleared my device / internal storage....TWICE
im pretty much going to give up soon if no one helps me

2tone72 said:
Ok so i have a dilemma....
i installing the 3.5 .net framework perfectly on my phone it says it was succesful while using activesync the whole jazz
but even when i try to run gyrator 2 it still comes up as this
Error
an unexpected has occured in Brins0net_ScreenRotator.exe
Select Quit and then restart this program, or select details for more information
....
ive tryed to uninstall it, re install it again
ive also cleared my device / internal storage....TWICE
im pretty much going to give up soon if no one helps me
Click to expand...
Click to collapse
Use the sticky Gyrator2 thread:
http://forum.xda-developers.com/showthread.php?t=427805
Do not create a new thread!!!
P.S. "Brins0net_ScreenRotator.exe" -> this file name makes me think you are using a very old version. The latest version is the one at the top of the Gyrator2 download web page. you should have no problems with latest version 2008.11.21.
THREAD CLOSED!!!

[APP] [CAB] Topaz Comm Manager VGA (Raphael and Diamond)

I have made a CAB with the new Topaz comm manager and its applets.
http://rapidshare.com/files/219499651/Topaz_Comm_Manager.cab
Sometimes in the first install it requires to turn Wifi on and off from setting to get it grayed out.

can you made a version for QVGA thanks mod

I get a message that I lack sufficient permission. Any ideas? I've never gotten that before. Does this require a 21000 ROM?
Update: You were right - SDKCerts must be installed first. Thanks again. Posted it here as well http://www.fuzemobility.com/touch-pro-2-communications-manager-ported/

bugsykoosh said:
I get a message that I lack sufficient permission. Any ideas? I've never gotten that before. Does this require a 21000 ROM?
Click to expand...
Click to collapse
+1 to this error. About halfway through the install (bars are at about 50%)
it gives me the ''does not have sufficient system permissions'' error.
Running a CDMA 21042 Diamond ROM.

Can this file be posted elsewhere? TQ
I can mirror if i can get a copy on 4shared site.
TQ

bugsykoosh said:
I get a message that I lack sufficient permission. Any ideas? I've never gotten that before. Does this require a 21000 ROM?
Click to expand...
Click to collapse
NO it worked on 20000, in fact i am using it. Have you installed sdkcerts?

Greeat job wow its bad ass good find an thanx for this cab!!! little goodies are always fun lol

Please
Someone please port for QVGA.
Paul

Does it work on WVGA (Touch HD Blackstone with stock English ROM build 20757)?

nwradu said:
Does it work on WVGA (Touch HD Blackstone with stock English ROM build 20757)?
Click to expand...
Click to collapse
I second that ! I got a french cooked rom, a great rom, but I miss really the new comm manager.

Works on WVGA!
I'm using it on my german Xperia X1
Chris

this one works. the problem is the dlls arent signed.
http://forum.ppcgeeks.com/showthread.php?t=64195

I am running NATF 4.5's, it installs but i can't get the advanced settings for wifi or phone, only the advanced options for bluetooth works. Tapping the center, or the far left side doesn't do anything for me on those two options.

It works well, thank you.

Well, I have the sdkcerts.cab installed (I had to for XboxMod's Rhodium), but I still get the error during installation that have insufficient permissions.
I tried installing sdkcerts again, but it quickly returns stating it was successfully installed on my device. The new Comm Mgr cab still refuses to install.
I am running with the AT&T leaked test ROM if that makes a difference.

ap4lifetn said:
I am running NATF 4.5's, it installs but i can't get the advanced settings for wifi or phone, only the advanced options for bluetooth works. Tapping the center, or the far left side doesn't do anything for me on those two options.
Click to expand...
Click to collapse
Same happens to me on my NATF 4.3's.

imreolajos said:
Well, I have the sdkcerts.cab installed (I had to for XboxMod's Rhodium), but I still get the error during installation that have insufficient permissions.
I tried installing sdkcerts again, but it quickly returns stating it was successfully installed on my device. The new Comm Mgr cab still refuses to install.
I am running with the AT&T leaked test ROM if that makes a difference.
Click to expand...
Click to collapse
OK, it it is not a cooked ROM you have to run the patch that allows to run unsigned software.

What patch?
caldito said:
OK, it it is not a cooked ROM you have to run the patch that allows to run unsigned software.
Click to expand...
Click to collapse

if i install this, will it be in english, or will it be in the language of my rom and manila? my phone is in russian, will this new comm manager have the proper mui files??
thanks

Secondary pages not showing
I installed the package on my stock rom AT&T Fuze. The main function works great. I was even able to use the Advanced Configuration utility to add the selectable 3G item. However, the only secondary page that works for me is the Blutooth page. All others just light up the item for a moment then shut it off---no secondary page displayed. Has anyone else had this issue?

hi, I'm a noob with a question about my HTC tilt 2. Help please!

I installed a few apps on my HTC tilt 2 with at&t from some sites. Everything was working fine for a while until my phone started slowing down and freezing alot, so I did a soft and hard reset and it fixed the freezing problems but when I run most of the apps, I get this message, ' This application requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device.' Then it says quit and I hit it and this message comes up in a box, ' .NET CF Initialization Error ' and in the box it states, ' The application failed to load required components. If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of .NET Compact Framework is recommended. Support info: -2147483643 (80000005)' So i downloaded it and get a message saying, ' NETCFSetupv35.msi' and in the box it states, 'There is no application associated with "NETCFSetup35". Run the application first, then open this file from within the application.' I don't know what I'm doing wrong but any help or advise will be appreciated. I don't know much about my phone but I'm pretty sure I did everything right. It all worked before when I installed the apps? Thanks in advance for your help.

drehustler said:
I installed a few apps on my HTC tilt 2 with at&t from some sites. Everything was working fine for a while until my phone started slowing down and freezing alot, so I did a soft and hard reset and it fixed the freezing problems but when I run most of the apps, I get this message, ' This application requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device.' Then it says quit and I hit it and this message comes up in a box, ' .NET CF Initialization Error ' and in the box it states, ' The application failed to load required components. If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of .NET Compact Framework is recommended. Support info: -2147483643 (80000005)' So i downloaded it and get a message saying, ' NETCFSetupv35.msi' and in the box it states, 'There is no application associated with "NETCFSetup35". Run the application first, then open this file from within the application.' I don't know what I'm doing wrong but any help or advise will be appreciated. I don't know much about my phone but I'm pretty sure I did everything right. It all worked before when I installed the apps? Thanks in advance for your help.
Click to expand...
Click to collapse
Yeah it sounds like you had CF 3.5 on there before but somehow it didn't stay after the hard reset (which indicates it was installed sometime after the phone was first purchased).
The file you downloaded is to install it from your PC, not the phone. Put the cab file I attached here on your phone, run that, and it should resolve the issue

Thanks for your response, when i click on it it get a message saying, 'FIle download failed The requested header could not be located.' i've actually been getting that message a few times with other downloads too. would you know what that means? thanks again for your help.

run this from your computer. http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&displaylang=en

drehustler said:
Thanks for your response, when i click on it it get a message saying, 'FIle download failed The requested header could not be located.' i've actually been getting that message a few times with other downloads too. would you know what that means? thanks again for your help.
Click to expand...
Click to collapse
Hmmm no, never heard of it, and basic searching turns up nothing but lists of odd HTTP error codes, that one included. My guess would be an issue with your browser on your PC, but I really couldn't say for sure.
You can also just run the file Rhodium500 linked to above, it's the same .msi file you put on your phone in the first place but couldn't get to run from there...it's an automated installer that just handles everything from your PC instead of you putting the cab on the phone manually.

thanks alot guys, still have no luck and since my phone is under warranty, i'm gonna get a new one. I got 2 htc tilt 2's and only mine is doing this? i'll be back.

dude getting a new touchpro2 wont help... i dont think... like the guy who posted the attachment said, just install it and it should work. if u cant download it use your friend's computer or the library

Dude I had the same problem and if you wait a few mins Ill find it in the microsoft website so you can try downloading from there. Just run it on your computer, then connect your phone with active sync. Go to programs> More> Add/Remove programs and click on the little box there. (I am not sure if the menu goes like this, im actually sure that it doesnt, but for some reason my phone wont connect the WMDM right now so i cant tell u) anyway dont return the phone just because of that cuz the new one might have a problem thats actually harder to fix
I dont remember where I got it from but Ill try to find the original place where I found it.
Heres the file
Microsoft Website
You can download it straight from their website. Its free and it doesnt hurt

thanks, just tried it and had no luck?? i can't even return my phone until the 12th so i'm still trying to figure it out.

hey everybody, I reset my sync center/active sync and re downloaded that from the microsoft website and it seemed to have fixed the problem. I appreciate your help very much.

drehustler said:
hey everybody, I reset my sync center/active sync and re downloaded that from the microsoft website and it seemed to have fixed the problem. I appreciate your help very much.
Click to expand...
Click to collapse
Just a hint; it seems that either resetting the device or ActiveSync seems to solve a lot of problems sometimes. Had the same that my device didn't want to accept new Exchange-settings I made on my PC. After resetting both, it worked flawlessly.

[Q] Touchxperience doesn't launch?

Hi,
I've just flashed Xbmod's nodo rom. A beautiful rom! But there's one problem, I installed the included Windows Phone Device Manager, and it seems to connect fine to my hd2. It says that it's detected, then it says that it's installing Touchxperience. After that I get an error message stating that it can't launch touchxperience. It does show up in the installed programs list, but when I launch it, it shows a black screen for 3-5 seconds, then it goes back the the list again. I searched the net about this problem, and I saw other people have it too, but I don't see any solution.
Thanks
(I also have installed al the requirements for wpdm)

Ran into the same problem this morning. Havent looked into it very much. Was trying to load my US navigon maps.
It worked perfectly fine with an older 7004 build I had on my phone.
Possibly not compatible with NODO. Definately installs the xap though. Dont the apps have to update for the NODO build. Not sure. Havent had much time recently to mess around with phones as much. So my knowledge is sort of limited on newer issues.
Hopefully it gets figured out. Just noticed that someone got the US navigon maps working and thats the one app I really missed having on WM. Not that I use it all the time but nav comes in handy when it needed.

I'm using ROM XBmod 1.11 and got same problem.
I tried to install touchXperience manually with .xap file and then launch it on my phone, still cannot start.
Someone said that maybe some hacks on the ROM cause this problem. I checked "dehydrate" hack and saw the registry key is default (DehydrateOnPause = 3).
Any other suggestion?

bachvi said:
I'm using ROM XBmod 1.11 and got same problem.
I tried to install touchXperience manually with .xap file and then launch it on my phone, still cannot start.
Someone said that maybe some hacks on the ROM cause this problem. I checked "dehydrate" hack and saw the registry key is default (DehydrateOnPause = 3).
Any other suggestion?
Click to expand...
Click to collapse
I had the same problem but if you updated your developer tools to windows phone 7.1 beta 1 or 2 it wont work anymore. but a new version seems to be coming out.
keep your fingers crossed
hope I was helpful

demaxmeister said:
Hi,
I've just flashed Xbmod's nodo rom. A beautiful rom! But there's one problem, I installed the included Windows Phone Device Manager, and it seems to connect fine to my hd2. It says that it's detected, then it says that it's installing Touchxperience. After that I get an error message stating that it can't launch touchxperience. It does show up in the installed programs list, but when I launch it, it shows a black screen for 3-5 seconds, then it goes back the the list again. I searched the net about this problem, and I saw other people have it too, but I don't see any solution.
Thanks
(I also have installed al the requirements for wpdm)
Click to expand...
Click to collapse
Take mobile off usb, power down and power back up again. now try touch Xperience.
Is it now showing? If so to marry with WPDM. put usb in, now if Zune starts, close it down. Start up WPDM. wait till it connects with the TouchX.
Is it now working? I am using Xmob 1.11 rom, and have no problems. But make sure that the ROM is cool, and not hot.
FPM.

bachvi said:
I'm using ROM XBmod 1.11 and got same problem.
I tried to install touchXperience manually with .xap file and then launch it on my phone, still cannot start.
Someone said that maybe some hacks on the ROM cause this problem. I checked "dehydrate" hack and saw the registry key is default (DehydrateOnPause = 3).
Any other suggestion?
Click to expand...
Click to collapse
If you are using Advanced Config 1.2.1.1 (From Julian Schapps) Then slide it over to Tweeks.
There should be a tick on the Dont dehydrate apps on pause. Leave the tick on.
That should fix it.