Related
Hi there,
I started scripting an app that synchronizes app data between devices. I wrote my first try in python for android, but it lags support for requesting root rights. I wasn't able to do this request nether within python, nor with any shell wrappers. As a workaround I'm calling shell command lines via su. As these alter frequently, I'm always asked to permit root requests. Tries to do this within python end up with messages that libpython2.6.so could not be found. This is related to the fact, that LD_LIBRARY_PATH and some other environment variables are not set.
Is it possible to set these variables permanently within the system?
Is there a better way to run a python script as root?
Would it be easier to archive this in Java? If so, what would be a good starting point for reading?
As a first step i would like to run the script from tasker. Later may be as a standalone apk.
Any advice is appreciated.
Sent from my Transformer TF101 using Tapatalk
New: SANE (USB Scanner backend and drivers) - OTG equipped device needed to work for this - YES, Scanner Access Now possible and Easy with your phone
This can (in combination with tesseract-ocr) be very useful to recognize text from scanned images.
For pictures see also http://forum.xda-developers.com/showpost.php?p=23046120&postcount=187
Update 01/30/2012: Now with a small android app (ScriptStarter) to start services and other shell scripts easily from the GUI. See bottom of the post.
WHAT'S POSSIBLE WITH THIS SCRIPT:
With this bash script your are able to build relatively easy from source a lot of native software (over 90 at the moment) from the GNU/Linux community for your Android phone and you will have
the good experience with free software.
All these tools and programs are not "apps for the GUI" for Android but native running command line tools "under the surface" of your Android GUI like the kernel and other services.
Don't ask me if it makes any sense to install program xy (like MySQL) on a phone. This is your decision. It's possible, so try it and see what you can do with it.
Note: I tested most of the compiled software on a Samsung Galaxy S2 (my phone). I cannot test it on a variety of phones because I have no mobile phone shop...
Currently buildable with this scripts (abstract, see the full list in package_selection.conf):
PHP 5.3.10 (with almost all extensions and XCache)
MySQL 5.5.19 (if you want a full database server on your phone...)
lighttpd 1.4.30
OpenSSH 5.9p1
OpenSSL 1.0.0f
Samba 3.6.3
cURL 7.23.1
bash 4.2
BusyBox 1.19.3
ImageMagick 6.7.4-10
OpenVPN 2.2.2
Python 2.7.2
Node.js 0.6.7
git 1.7.9
Wget 1.13.4
Rsync 3.0.9
TCPDUMP 4.2.0
Midnight Commander 4.8.1
Pure-FTPd 1.0.35
screen 4.0.3
iptables 1.4.10 (without bionic bug "getnetbyaddr()" and with iptables-save/restore!)
BIND 9.8.1-P1
Lua 5.2.0
Ruby 1.9.3-p0
usbutils 004
MTDUtils latest git
GCC 4.6.2 (c, c++)
GNU Coreutils 8.14, Binutils 2.22, Findutils 4.4.2, Inetutils 1.8
QEMU 0.15.1
SANE 1.0.22
tesseract-ocr 3.01
...
a lot of libraries, development tools and other useful programs
...
FEATURES:
automatic download and untar the cross-compilers (if not already done) for cross compiling
automatic download and untar the source packages (if not already done), that you have selected
solve dependences and reserves additional needed packages
apply patches to the sources if necessary
build them, "install" them in a folder for later "ready to transfer" to your phone and stripes the binaries and libraries to reduce the filesize if selected
autogenerate a tar file and adb push the file to device if selected
allows you to use well-known software like PHP, MySQL, OpenSSL, OpenSSH, OpenVPN, bash and lighttpd on your phone (see the full list in file package_selection.conf, see attachement)
scripting and development on your phone
no limits with BusyBox (without want to be derogative, BusyBox is a wonderful tool), full featured tools like Coreutils, Binutils etc.
build scripts are expandable with other or newer packages you eventual want to have
QUESTIONS AND ANSWERS:
Q: Do I need native GNU/Linux programs and what is that?
A: If you do not know what native Linux applications are, then stop here - you don't need them.
Q: What can I do with these tools?
A: Many things. As a developer you can use the libraries to include them in Android GUI apps, as user you can start for example a webserver on your phone and write some HTML or PHP pages
just for fun or replace BusyBox with full featured tools (or only some commands).
Some tools are also very useful to find network errors, check the network traffic and many more.
Q: What do I need?
A: A Linux installation (VM or real), some Linux knowledge and a little bit time to read all instructions carefully. A rooted Android device with enouth free memory (ext2/3/4 formatted)
See README for details.
Q: Costs?
A: Nothing. The scripts are Open Source (GPL v3), the packages are GPL licensed or under a similar license. The cross-compilers are Open Source or free to use for non-profit purposes.
But I would be pleased if I get a donation and/or a press on the "Thanks button", if the scripts are useful for you. It was a long and hard work...
Note: The attachement scriptset-x.yy.zip is double packed (inside .bz2), because I want preserve the right settings of the scripts.
STEPS:
Selected the desired packages in the config file
Adjust the compiler settings for your phone
Run the build script to download and compile the software
Copy the generated TAR files to your phone or let "adb" this do for you and unpack them in the prepared sysroot folder
For more information please read the instructions in "README"
Please let me also know if you have any problems or if you have questions or further suggestions.
Thanks go to the Open Source community and a lot of people/webpages with hints about cross-compiling software.
Thanks
smitna
CHANGELOG:
01/14/2012 First public release v0.9
01/14/2012 Update: Removed unneeded big patch for ncurses
01/15/2012 Release of v1.0
Update: Fixed build of gcc. Note: the header files are not copied automatically with the script.
If you want to compile on your phone, set TAR_HEADERS=1 in configuraton.conf
Typos: some translations corrected in build.sh
01/16/2012 Release of v1.1
Update: Removed building of fsck from util-linux-ng, it's in e2fsprogs
Update: ISC Cron / vixie cron: set correct paths in pathnames.h before compiling
Enhancement: More detailed explanation of device specific compiler settings with list of possible values
Update: Removed dependence e2fsprogs libs from e2fsprogs
01/17/2012 Release of v1.2
Update: Build of zip, zipcloak, zipnote, zipsplit, unzip, unzipsfx and funzip now possible without errors
01/17/2012 Release of v1.3
Update: Added Node.js
Typos: some translations and language errors corrected in build.sh and README (sorry, I'm not a native English speaker...)
01/18/2012 Release of v1.4
Fixed TMP_PATH in PHP extension XCache (mmap.c) to prevent startup warning
Fixed BusyBox problems with static build against glibc ("__getpagesize" segfault with ping, traceroute and other networking parts)
and added some BusyBox patches.
BusyBox is now dynamic linked, so don't replace the system BusyBox with this build, because of missing mount/paths to libraries at phone startup
01/20/2012 Release of v1.5
Update: Cleanup in scripts and separation of configuration and code. Now it's only necessary to edit configuration.conf and package_selection.conf
Update: Added gzip
Update: Added experimental adb push to device if the device is connected and permissions are ok
Update: Check for installed programs. Script now exists on check failure to minimize errors while compiling.
01/21/2012 Release of v1.6
Bugfix: MySQL build could fail if gen_lex_hash could not generate the file sql/lex_hash.h in pass 2
Update: adb push should now work, check for connected device (and possible multiple devices) and check for right permissions to use the device
Enhancement: Even more explanation of device specific compiler flags and some hints to find the right settings.
01/21/2012 Release of v1.7
Enhancement: To eliminate sure a failing MySQL build, with every new run the source folder will be removed before completely
Enhancement: file version is now strictly checked (the host version must be the same as the cross version)
Some minor changes and filechecks (e.g. autoconf)
01/23/2012 Release of v1.8
Bugfix: Python has SQLite dependencies and SQLite must be ready before Python configure/make
Bugfix: In certain circumstances the optimizer settings get lost
Bugfix: Removed --enable-multibyte from bash, no chance to use it with NDK
01/24/2012 Release of v1.9
Update: Added ngIRCd (Please read the comment for this server, because of running as root)
Update: Sorted the links and package names in the config a little bit...
01/26/2012 Release of v2.0
Bugfix: OpenSSH wants to touch /var/empty while compiling, should be fixed --with-privsep-path now set (thanks to member dateno1 for his reports of such warnings/errors)
Bugfix: Removed a wrong CFLAG -I path from NDK config (only useful for me, really useless for others...)
Enhancement: Example for a user db for Pure-FTPd virtual user database in README (please use virtual users, it's the best and easiest solution)
Update: OpenSSH build need ssh-keygen for the generation of the default keys, added this info to README and the package selection
Bugfix: Not really a bugfix, but some installers don't set the right permissions of libraries in the sysroot folder, so set them global in the final task
Bugfix: Removed --with-lastlog=$TARGET_SYSROOT/var/log/lastlog from OpenSSH and added --with-lastlog=no, I don't know why this is not working and throws a warning, but we can live without it...
Enhancement: Added option to choose the sysroot variant from the CodeSourcery libs: v5TE (default), v4T (old), thumb2 (v7, fastest if supported by the phone)
Enhancement: Added option to tar the headers for development on the device with CodeSourcery (hint: always set rpath in LDFLAGS to make use of the CodeSourcery libs)
01/26/2012 Release of v2.1
Update: Added getcap/setcap and libraries from wishlist, needs libtoolize. Note: This is in a testing stage, kernel and filesystem support needed!
01/30/2012 Added a ScriptStarter app
09/02/2012 Release of v2.2
Update: Local compilation of static "tic" from ncurses for buildhost, if ncurses installation is missing
Enhancement: "downloading only" mode without compiling the packages (and force download)
Enhancement: some parameters for starting the script with additional functions (show with ./build.sh help)
Enhancement: more logging and outputs
Enhancement: language specs, all outputs can be changed to other languages in build.sh
Update: Added dosfstools
Update: Added Ruby
Update: Added example configs and starter scripts for Samba and OpenSSH
Update: Use of http-URLs if possible and update of some broken external links since last release
Bugfix: util-linux-ng needs gettext, added dependence
Bugfix: Added parameter to Samba to solve user/group settings and socket_wrapper support to set path vars at runtime
Update: Changed PHP version to 5.3.10, Samba to 3.6.3 and git to 1.7.9
02/11/2012 internal Release v2.3
Bugfix: openVPN patch for /dev/tun and links to ip/netstat/ifconfig/route, see hints for symlinks
02/16/2012 internal Release v2.4
02/25/2012 Release of v2.5
Update: Added LAME
Update: Added experimental CUPS
Update: Changed PNG version to 1.5.9
Update: Added Net-SNMP
Update: Added Netpbm
Update: Added PNG 1.2.47 for Netpbm and phpSANE
Update: Added LibTIFF
Update: Added SANE (USB Scanner backend and drivers) - OTG equipped device needed to work for this - YES, Scanner Access Now possible and Easy with your phone
Update: Split patches for bash (4.1 and 4.2) for better and easier (automatic) inclusion of original patches
02/28/2012 Release of v2.6
Update: Added Cuneiform OCR
Update: Added tesseract-ocr (see hints for more details howto use it)
ScriptStarter
02/03/2012 Added a small ScriptStarter for the GUI. With this app, written with JQuery, PhoneGap and Java (wrapper to execute the shell scripts) it's possible to start for example the lighttpd web server, Pure-FTPd or MySQL from within the Android GUI without a terminal and read the output. If a script needs root access, there is a checkbox to allow this. For this to work, copy the script sush in the script folder. All scripts ending with .sh can be started (please choose after the first start your script folder on the device to add the scripts to the selection, normally your [SYSROOT]/sbin folder).
Three buttons (start, stop and status) are predefined for start-stop-status scripts, there is also a parameter input field for more start values.
Free GPL v3 source code also included (Eclipse project). Please don't expect too much eye-candy. The GUI could be much better, but my CSS skills are very limited...
I added a few example scripts in the zip file, for example a battery stats reader. Before starting these scripts, have a look in the source code to be sure that they are compatible with your device.
Update 0.97 02/03/2012: Now the stderr is also printed in the output window
Update 0.99 02/10/2012: Replaced scrolling api with a much better solution (jScrollPane) for the output window. Not the real Android scroll feeling, but it's usable.
Thanks! I would hit the Thanks button, but I am on my mobile atm.
Sent from MIUI powered phone
Someone tried it? Problems?
Please, I need your feedback...
Sounds interesting, I'll try once I get back home and share feedback here
now i try to all packages for test
i will test on cortex a8 (motolora xt720)
TARGET_MARCH="armv7-a" (not work on armv7 )
TARGET_MTUNE="cortex-a8"
TARGET_MFPU="neon"
TARGET_MFLOAT="softfp"
it make dynamic binarys but i don't want dymanic type (because it difficult to divide one thing and maybe not work on android's libs)
how can i make static type?
ps : oh...it has so many comile error (even can't read or count all)
dateno1 said:
i will test on cortex a8 (motolora xt720)
TARGET_MARCH="armv7-a" (not work on armv7 )
TARGET_MTUNE="cortex-a8"
TARGET_MFPU="neon"
TARGET_MFLOAT="softfp"
it make dynamic binarys but i don't want dymanic type (because it difficult to divide one thing and maybe not work on android's libs)
Click to expand...
Click to collapse
I hope I understand your question. Why not dynamic?
Yes, you have to set the parameters for your mobile phone. For TARGET_MARCH try "armv7", for TARGET_MFLOAT "softfp" and for TARGET_MFPU "vfp" but check this last setting carefully for this phone.
It's very hard to build a full static binary (and sometimes nearly impossible) and it's also hard to build against bionic (with NDK). I had no good experience with it . A lot of compiler runs wasn't sucessful. Edit: I also had for example massive problems with openssl. I couldn't find a way to build it with NDK or static and then build other programs like cURL with openssl support.
Static binaries are also too big and not necessary. For this we have a sysroot environment to be independent from bionic and without the restrictions. The compiled libs and binaries are linked to the CodeSourcery glibc and have set the custom "rpath" for the dynamic loader. That's no problem I think.
that's simple
if someone want to make some binary for all version of android (even same cpu) it will not work well (defend on basic lib(ex : libc) is ok but complex things will not work)
i know make static type binary is very difficult but it valable
dateno1 said:
that's simple
if someone want to make some binary for all version of android (even same cpu) it will not work well (defend on basic lib(ex : libc) is ok but complex things will not work)
i know make static type binary is very difficult but it valable
Click to expand...
Click to collapse
You are right, if you want to build a "portable" binary, you have to set very safe settings, like TARGET_MARCH="armv5", the full list is in the "README". But it's not my main target to offer a solution that is easy portable to other phones, instead you can build the software with optimizations for your phone to "get the best" for it
smitna said:
You are right, if you want to build a "portable" binary, you have to set very safe settings, like TARGET_MARCH="armv5", the full list is in the "README". But it's not my main target to offer a solution that is easy portable to other phones, instead you can build the software with optimizations for your phone to "get the best" for it
Click to expand...
Click to collapse
just i want to add some more function on the phone
thanks for patch files
I want to try this, to install some apps(most interested fro mc), but I don' t wanna change my sd card.
Can I use phone' s /data partition as mysysroot directory? I have 1.5GB space available on data partition, it is 2GB all.
And If yes, I must create the dir: /data/mysyroot? And where to create this dir on pc? On root directory of my linux system?
dancer_69 said:
I want to try this, to install some apps(most interested fro mc), but I don' t wanna change my sd card.
Can I use phone' s /data partition as mysysroot directory? I have 1.5GB space available on data partition, it is 2GB all.
And If yes, I must create the dir: /data/mysyroot? And where to create this dir on pc? On root directory of my linux system?
Click to expand...
Click to collapse
You can use the /data partition. Just create a new folder, for example /data/sysroot. On your PC you have to create the same temporary with full user rights. This is not your working dir for building. Create a new dir in /home/user and unpack the files there. In settings insert the /data/sysroot as TARGET_SYSROOT and change the other settings for your phone and choose mc=yes. Then start the ./build.sh
Thanks for your quick answer.
Just to make clear because my english understanding is not in a high level
I must create the /data/sysroot dir under "/"(root directory) on linux pc with superuser rights?
dancer_69 said:
Thanks for your quick answer.
Just to make clear because my english understanding is not in a high level
I must create the /data/sysroot dir under "/"(root directory) on linux pc with superuser rights?
Click to expand...
Click to collapse
Yes, that is right. But this is the only step you need to do as root or better with root rights. After this work as usual as user.
oh it can't make mysql
package selection : mysql only
target directory (prefix) : /sddata/mysql (on sdext on my system)
armv7-a
cortex-a8
neon
softfp
then run ./build.sh 2> error.txt
it is my error messages
http://pastebin.com/g7Yi4bGz
sorry you can see this link only today (my mistake)
this setting can make some binary and lib run on my phone but fail to make gcc or mysql (when i try gcc it just fail to making gcc only (other things were made) )
dateno1 said:
package selection : mysql only
target directory (prefix) : /sddata/mysql (on sdext on my system)
armv7-a
cortex-a8
neon
softfp
then run ./build.sh 2> error.txt
it is my error messages
http://pastebin.com/g7Yi4bGz
sorry you can see this link only today (my mistake)
this setting can make some binary and lib run on my phone but fail to make gcc or mysql (when i try gcc it just fail to making gcc only (other things were made) )
Click to expand...
Click to collapse
Please notice first, that you should not run this script as root!!
Then there is something wrong with the build of the first needed packages:
ZLIB=yes
OPENSSL=yes
CURL=yes
GETTEXT=yes
LIBXML2=yes
READLINE=yes
NCURSES=yes
- The script cannot find the readline sources. Do you have a subfolder readline-6.2 in folder sources in your builddir? Same for the other source folders. The script first downloads the packages to folder packages, extract the tars in folder sources, repeated for all selections.
(look at line 67 in your log: ./build.sh: 1402: cd: Python-2.7.2: No such file or directory)
- You have no "xz", install it first and make sure, that the other necessary packages are installed. MySQL and gcc are "two pass" compilations and this builds generating temporary binaries, runable on your linux pc. So you need all for a successful compilation of such binaries like gcc, make, python etc. on your linux machine. If you are using Ubuntu, then install the "meta-package" build-essential, look in the README.
Do you have the other unpacking tools like gunzip etc. Please install also "bison"
You should do following steps:
1. First select only the necessary packages (see above), all others to no.
2. If zlib, python, readline an the others are cross-compiled (without errors) and the libraries are in ./sysroot/lib, then deselect them (=no) and select mysql=yes and start a second run with ./build.sh
smitna said:
Please notice first, that you should not run this script as root!!
Then there is something wrong with the build of the first needed packages:
ZLIB=yes
OPENSSL=yes
CURL=yes
GETTEXT=yes
LIBXML2=yes
READLINE=yes
NCURSES=yes
- The script cannot find the readline sources. Do you have a subfolder readline-6.2 in folder sources in your builddir? Same for the other source folders. The script first downloads the packages to folder packages, extract the tars in folder sources, repeated for all selections.
(look at line 67 in your log: ./build.sh: 1402: cd: Python-2.7.2: No such file or directory)
- You have no "xz", install it first and make sure, that the other necessary packages are installed. MySQL and gcc are "two pass" compilations and this builds generating temporary binaries, runable on your linux pc. So you need all for a successful compilation of such binaries like gcc, make, python etc. on your linux machine. If you are using Ubuntu, then install the "meta-package" build-essential, look in the README.
Do you have the other unpacking tools like gunzip etc. Please install also "bison"
You should do following steps:
1. First select only the necessary packages (see above), all others to no.
2. If zlib, python, readline an the others are cross-compiled (without errors) and the libraries are in ./sysroot/lib, then deselect them (=no) and select mysql=yes and start a second run with ./build.sh
Click to expand...
Click to collapse
i'm not edit necessary part
ZLIB=yes
OPENSSL=yes
CURL=yes
GETTEXT=yes
LIBXML2=yes
READLINE=yes
NCURSES=yes
i just edit mysql=no => mysql=yes
ok try to install packages and run as not root
dateno1 said:
i'm not edit necessary part
ZLIB=yes
OPENSSL=yes
CURL=yes
GETTEXT=yes
LIBXML2=yes
READLINE=yes
NCURSES=yes
i just edit mysql=no => mysql=yes
ok try to install packages and run as not root
Click to expand...
Click to collapse
Good luck!
If you can wait a little bit:
In a short time I release a new version with better error and program checks and some small bug fixes. With this version it's not longer necessary to edit the build.sh, it's now all in only two separated configuration files (configuration and package selection).
hmm...fail to compile mysql again
with this error
note: the mangling of 'va_list' has changed in GCC 4.4
full error log on http://pastebin.com/jd1Pw9Xw
dateno1 said:
with this error
note: the mangling of 'va_list' has changed in GCC 4.4
full error log on http://pastebin.com/jd1Pw9Xw
Click to expand...
Click to collapse
Hello dateno1,
first: you have *NOT* changed to a user account as promised
The va_list is only a note, not an error, no problem (but ask the MySQL devs why they haven't adapted the code to gcc 4.6.1).
Your Python cross binaries and libraries are not ok (from you broken first build?). Please start from a "fresh state" (delete the folder sources/Python-2.7.2 and sysroot) or start from a total clean state.
Please use the latest 1.5 version of the script because of the xargs warnings at the end
Delete the complete sysroot folder, there are some folders not in place (data and docs). There is a script remove_all_files.sh
Start this script in your buildroot with ./remove_all_files.sh to remove all files and symlinks in subfolder sysroot.
Edit: delete the sysroot folder complete, there are some other missing folders from your first build!
Start again with ./build.sh and activated packages (the "ALWAYS NEEDED" one and MySQL)
smitna said:
Hello dateno1,
first: you have *NOT* changed to a user account as promised
The va_list is only a note, not an error, no problem (but ask the MySQL devs why they haven't adapted the code to gcc 4.6.1).
Your Python cross binaries and libraries are not ok (from you broken first build?). Please start from a "fresh state" (delete the folder sources/Python-2.7.2 and sysroot) or start from a total clean state.
Please use the latest 1.5 version of the script because of the xargs warnings at the end
Delete the complete sysroot folder, there are some folders not in place (data and docs). There is a script remove_all_files.sh
Start this script in your buildroot with ./remove_all_files.sh to remove all files and symlinks in subfolder sysroot.
Edit: delete the sysroot folder complete, there are some other missing folders from your first build!
Start again with ./build.sh and activated packages (the "ALWAYS NEEDED" one and MySQL)
Click to expand...
Click to collapse
make new account (compile.compile) and use su -c "./build.sh" compile
i think it work (compiled file's owner is changed to compile.compile)
now i delete almost files and folders (exclude android-ndk, readline-6.2, toolchains) and retrying...oh failed (attach new log (full) )
'를 위해 할 일이 없습니다' mean 'no job for~'
'오류' mean 'error'
[Toolkit][Windows&Linux(Wine)] Already Setup Adb/Fastboot Environment and Installer
First, I take donations.
Second, see the 2nd post about Windows XP compatibilty.(XP requires that the tool be used on a usb drive or a partition that does not contain the current running operating system)
(For the other OSs it works fine on the drive with the running OS) (For Linux see the last post)
Third, XP users that don't have a removable drive available can use the XP-ONLY version on the local drive.
Fourth, read EVERYTHING here on the first and last post.
Fifth, adbClient is a download, unzip, connect to phone package that requires nearly no setup at all allowing you to use the android debugging bridge.
If you want to install adb and fastboot use the "instadb" command.(If you get an access denied error, you must have the administrator password and check your typing)
ANSWERS TO YOUR PROBLEMS:
If you want to update but continue to keep automagically using your work folder: you must copy the Work folder into the folder above the updated bin folder.
Like so: extract the new package. copy the old work folder into the new extracted folder. your work folder should sit right beside the launchadbclient script and the updated bin folder.
This tool can be moved anywhere alongside the work folder
HOW TO USE:
To launch the script extract the zip and run LaunchadbClient by double clicking on it.
Type "xt" without quotes to see a menu for commands.
Check out some package management by typing apk.
To install adb and fastboot to the system without fiddling with environment variables use the instadb command.
DRIVERS:
Visit this link first to enable usb debugging:
To utilize the Google usb driver extract its zip and right click the android_winusb.inf file and hit the install option.
If Google's drivers dont work or you have no drivers or adb doesn't mention any connected devices at the top of the window then you need to visit your manufacturers website for your phone's driver.
Here is the pdanet all purpose adb driver that is pretty much fail proof. if you have any issues with it uninstall it and try another one from below.
If all three of those driver suggestions are not applicable then read the "OTHER DRIVERS" category:
OTHER DRIVERS: The Universal Naked Driver is a good one. Or you can follow this exceptional tutorial for all purpose adb driver installation (I am not responsible for any issues with the tutorial, I just found it.)
I recommend Adb Konnect from the play store if drivers are a problem.
Sometimes your usb cable is keeping you from using adb, so try changing cables.(this actually just happened to me with my samsung usb cable and i ended up using my nexus 7 one instead)
DESCRIBE THE TOOL:
This tool is here to make my life(and your life) with adb easier.
It's the windows command line on steroids.
It is made for being put on a flash drive and being used on different computers.
Especially if you are using someone else's computer but want to keep an environment with your tools and files in it where you could just load it up from a flash drive.
It uses shortcuts for tools including and can autoroot etcetera among other features. This tool is free to use and distribute\modify with my name attached. It contains a presetup adb and fastboot environemnt and has extra binaries\scripts for working with the windows command line and android easier.
Overall it makes interfacing with android over adb much more interesting.
GETTING THE TOOL AND INFO:
1.9.5-XP_ONLY is for the Windows XP desktop only.
Version 3.2.9 is the latest stable release, Use this version please. Thanks for your interest.
If you want to take a snapshot of the latest development go here.
ANNOUNCEMENTS: I now have a donate button if you want to see more development.
I don't support 2.2 or 1.9.5 anymore. Only 3.x.
KNOWN ISSUES: tar might not work.
apklist won't auto exit because of the more pipe. just use control-c for now to unfreeze it
Some of the scripted adb commands stall.
EXTRA INFO:
The only thing that I own in the zip is the scripts. The copyright notice and license for android sdk and included files is included as Notice.txt and Noticeforadb.txt in the LicenseForAdbEtc.zip
With this tool their is no need to install adb or fastboot on your computer just run the script.
If you get an antivirus warning its because of the Zergrush, Psneuter, Framaroot, and ExynosAbuse root exploits.(And the Hstart binary sometimes)
I am not malicious anyway.(You can read my code easily)
You can copy the folder wherever you want. (I made sure it works)
Just don't have anything named bin in the same directory as the launch script.
EXTRA EXTRA INFO:
This tool is meant to be an extension to the command prompt and will pass anything that it doesn't understand over to the command interpreter.
It works in Wine. Extra launching needed. (See last post)
This is a tool for beginners and advanced users however beginners need to learn adb's commands before using this tool.
It will root 2.x and up(Support added for newer android versions). I suggest installing Supersu also.
Tool works on all windows versions: Wndows XP and above.
You are no longer encouraged to use the XP only zips for Windows XP.
For XP: If you use the tool on the local drive it throws errors however if you use it on a usb drive then it works fine
If you need to use it on a local drive then you can use the old win xp only version.
Windows 8 and 8.1 run the tool perfect.
Use the exit command to exit the tool.(It auto kills the adb server)
Links to third party tools used or included:
Recommended download: ApkMultiTool. Another recommended download: Mediatek flashtool
Framaroot
Exynosabuse
strace
Android Sdk
Stahlworks Binaries : Open source
Win32 Busybox Binary(pclouds) REPLACED WITH Tigress busybox
Freac Not in Slim builds.
Stericson Busybox Android Binary
Sqlite3 android
Supersu
Hstart for use with startup sound
This info applies to testing, finals, and anything else.
FUTURE CHANGES:
Code:
add start settings app and browser app command using am start
add intent disabler (Disable an app's MAIN so that it can be hidden from drawer and be unstartable "locked" )
add the ability to make img of a specified size and store it in /data and even loop mount it to sdcard
add the ability to live image the system and data partitions.
remember to make the user specify the filesystem for sdcard image
I need to backport all bug fixes and improvements to 1.9.5_XP-ONLY
use vbscripts to automate key sends (control-c) Not done due to batch sucking.
add su -c sh to start up root shell on device for use with things like strace. Not done due to batch sucking.
add if blank adb devices say you must connect with either cnt or plugging your device in. (But still show the output)
add variable for work folder
Migrate all custom data text files(hist,clr) to config folder in Work\ but keep defaults in regular bin folder.
add adbkiller script to the desktop by question on first startup.(Store info text file in userbin) (User variable then desktop)
clean output on adbp and adbps plus
change all du -smc to du -sm for single push/pull
add ability to do several pushes and pulls with du -smc in one operation
add parameters to adbp and adbps
add if not defined to destination and source file in adb and adbps to allow for hitting enter to quit in the middle of setting up a push or pull
cleanup and organize xt
include some sort of nano for windows binary for command line editing
include a compact notepad++
Remove extra binaries such as zip and unzip to point to busybox linkers (Skim through code to change "zip" to "busybox zip" or "sfk zip")
Pass all inputted commands to a script that can parse arguments before they are sent to they're respesctive scripts or binaries. (Mostly to catch /? and run it without call)
Remember to update adbClient Launcher to point to new folder.
Add first time greeting, explaining commonplace commands and the various folders using java.
add batch snake from [URL="http://www.dostips.com/forum/viewtopic.php?t=4741&mobile=on"]here[/URL] [URL="http://www.dostips.com/forum/viewtopic.php?t=4741&mobile=on"]and here[/URL] for fun
learn some design tips from batch snake.
add adb closer background script for when someone closes adbclient with the windows close button.
add ability to root adbps and adbp or just enable insecure adb debugging
setpass not using admin privileges, add call capability to use instadb privilege elevation code as an elevation module for the rest of my code)
search for commands
CHANGELOG:
This changlog is deprecated for the commits page on my github: https://github.com/lgrootnoob/adbClient_EnvironmentandTool/commits/master
Code:
With 1.3.1 adb/fastboot has been updated from platform-tools to rev. 19(Previously rev. 18.0.1)
Split 1.3.1 into xp only and vista up packages
Add a work command that will send you back to the work folder no matter where you are.
See third post.
Removed a couple of the zips in the post to make the download list easier.
Made license a separate download.
Add unroot function.
Implement extracter with a windows tar exe for extracting images from a tgz.
Make adb/fastboot installer for system. (%WINDIR%\system32) (To install the binaries just type instadb and follow the prompts)
(Installing adb and fastboot to the system makes adb or fastboot dependent applications operate without the need to setup complicated environment variables.)
(Before you would have had to make the environment variable point to the folder conanaining the binaries then you would have to check to make sure its setup properly. this will eliminate that issue)
Add the launch script into the package and update instructions. (JUST added launcher to make starting it easier.)
Issues with my implementations of certain processes inside the script.
Fixed updater typo.
Added sfk binary from stahlworks.(VERY useful tool [URL="http://stahlworks.com/products.html"]http://stahlworks.com/products.html[/URL])
Added zip and unzip binary from stahlworks
Added latest usb driver from google.
Add the launch script into the package and update instructions.
add win32 busybox and remove gnuwin32 tar command.
Apk install from file. And apk uninstall and apk installed lister. pm argument sender. apk command for menu
Version change in updater code. but server on mandatory downtime for a week.
Fixed problem with missing dlls in system32 install for adb and fastboot
^Fixed bugfix in 1.8 Whackamole:)
use nul to detect dirs
everything that is passed to cmd is called.(In 1.8.2+)
Added ls links to busybox and can use params like ls -l
Made links to busybox with batch files and parameters.
Added md5sum binary.
Make attempt at auto pushd popd implementation. To use this feature just cd to wherever then type back to go back.
New XP local drive version. (Remember that XP can run any version from a removable drive or drive that isnt the partition with the running OS on it.)
FIXED - Output cleanup and implementation of code rendering inner shortcuts unuseful)
add extra bin for user binaries in Work\userbin
added addpath command to append the current folder to the temporary path
Fix another bugfix.
testing version released so the version number on my server will not be updated until I have personally evaluated these builds for a couple of days.
implement pushd popd into my code
add windows tools from knife into adbclient.
made repo command.
added bin2hex binary
added deveject binary
move %clrsnd% %clrval% above the doneloop subroutine so busybox's ls command can properly highlight file names.
only use %clrsnd% %clrval% when needed (pretty much the same as I have done with adb devices and fastboot devices)
added zipalign binary
update updating system to live (ON)
add repo style p2p apt-get system called Gridlock(Thought of the name myself) (not p2p yet :( )
moved extended menu out of code and into a file to help clean up stuff.
add bash link for busybox
fixed up repo script address(dynamic)
added mkfloppy
fixed bug in apk installer code.
removed cmdmenusel and trashed the idea of using it for the preffered java dependency setup.
fixed small bug
changed exit for future dynamic handling of shutdown disk operations.
cat command takes over the beginning of the next echo so it has an echo. in its code.
Deprecated every addpath script and moving to modular addpath userspace script.
Also fixed varname bug in addpath script that made it worthless
Commented my info in.
fixed unrooting issue.
piped apklist to more.
Comment code/subroutines etc. and use whitespace to make it easier to read.(Half done, it needs more work)
everything below is for unreleased 2.3 version.
Strace helper
added goo.im opener
added audio converter freac (Freac has source code available freely on their webpage)
Remove just a couple lines from the inital output to make it fit the command prompt screen.
strace installer (chmod 777 adb push and su -c sh) for work with strace.
add data /T to top of script
added frontend for deveject binary because it is too complicated
make cnt a command that will take params so you can type cnt 192.168.1.81
^if no params are given it will ask for ip address
added send command to strace in testing
merged strace bug fixes into testing
fixed another path bug in testing
code now becoming very modular with me using scripted functions as commands in other scripts.
lgctnp always out to work dir now
fixed 'regression' in hist (Accidental reference to deprecated function broke it) (ALSO: fixed in clr)
project no subroutine/if statements: instead of using if statements on the users input on the main loop I will use batch files in my path that have the name of the user's command.
^This eliminates "" crashing.
add hash check for transmitted file. (Needs md5sum binary for android.) (Make it a question)
add busybox installer
add quick fixes menu for things like accidentally deleted launcher, etc.
fixed issue with busybox android binary got deleted.
added: 'mode con:cols=100 lines=50' for big console
fixed up lgctnp and dmsgnp code
add dmesg
quick patch for scroll height (It will be tweaked more in the future.)
[B]3.1.5 will be a temporary bug fix and binary addition in preparation for.......[/B]
make cd freac* point to full path instead
add startup Splash screen for christmas holiday
added Framaroot to rooter
added exynosabuse to rooter
adbsl is accidentally pointing to old doneloop subroutine and needs to be pointed to EOF
move from old pclouds busybox binary to [URL="http://intgat.tigress.co.uk/rmy/busybox/index.html"]tigress win32 busybox[/URL]
update android sdk dependent stuff (platform tools have been updated to 19.0.1)
update su and supersu
change call adbclient to call start adbclient so the intital launcher is exitable
java detector added
[B]3.2 Released![/B]
fix old subroutine pointers in devej
add startup sound
[B]3.2.1 Released![/B]
added screenshots to OP
patch instadb with set "installmaybe="
add size check for pulling/pulled or pushing/pushed files on adbp and adbps like the md5sum checker.'
update busybox/adb/fastboot/freac/anything else/check and update apk versions.
add question to adbp and adbps for redoing the push/pull operation if the user notices the hashes don't match
[B]3.2.4 Slim Released![/B]
change release naming scheme from final to only use final name for final release in 3.2.x, 3.3.x etc.
fix adbp to do you to "Redo pull operation?" instead of "Redo push operation?"
cleanup root.bat output organizing exploits by android version.
change subroutine pointer in ex from doneloop to :EOF
[B]3.2.5 Slim_ Maintenance Released![/B]
Google's usb driver updated to revision 9.
link every busybox applet
store busybox whoami value in variable and then put it into $~: set /p command
pointed launcher directly to bin folder name
updated binary and application dependencies
[I]Made some progress in porting a new xp desktop version: the path names need to have quotes around them.[/I]
[B]3.2.6 Slim Released![/B]
[I]INFO: adbClient is somewhat usable in Wine.[/I]
Framaroot and sfk updated.
Tigress busybox updated.
Fixed qfx mounting issue.
android busybox binary updated
updated supersu apk and su, [B]NOTE:[/B] It is ton of work to support 4.3 rooting but I will do it soon in 3.2.8 I will have to bundle cydiaimpactor somehow.
[B]3.2.7 Slim Released![/B]
2.2 removed(cached locally, so it will be unavailable. leaving the remnants of 1.9.5 even though xp is not supported by microsoft anymore)
[B]3.2.8 Released![/B]
GITHUB REPO: [url]https://github.com/lgrootnoob/adbClient_EnvironmentandTool[/url]
updated to usb driver v10
[B]3.2.9 Released![/B]
Bump:
Bump, any dev can use this tool to have their rom users debug the roms that they make easily if they like.
I have done enough testing to know that this works in Wine on Linux pretty good now.
However, special launch instructions are needed.
cd to the adbclient bin folder(Currently bin-3.2.6-Slim) and use the command:
Code:
WINEDEBUG=-all wine cmd /c adbclient.bat
- all on one line.
Adbclient should be started and you can connect to your phone wirelessly with cnt *.*.*.* (Insert ip address to the left).
Happy Linuxing.
EDIT: Bash port coming soon to a Linux computer near you.
Latest use of this tool as a library/environment for making a rooting package for phones.
http://forum.xda-developers.com/showthread.php?t=2738977
The changelog here will now go unmaintained in deprecation for a github repo: https://github.com/lgrootnoob/adbClient_EnvironmentandTool
3.2.9 released.
Lgrootnoob said:
I have done enough testing to know that this works in Wine on Linux pretty good now.
However, special launch instructions are needed.
cd to the adbclient bin folder(Currently bin-3.2.6-Slim) and use the command:
Code:
WINEDEBUG=-all wine cmd /c adbclient.bat
- all on one line.
Adbclient should be started and you can connect to your phone wirelessly with cnt *.*.*.* (Insert ip address to the left).
Happy Linuxing.
EDIT: Bash port coming soon to a Linux computer near you.
Click to expand...
Click to collapse
I don't like bash. :/
pcwizzy37 said:
I don't like bash. :/
Click to expand...
Click to collapse
bash is necessary for using some build systems to compile android source code. If the OP wishes to donate his time and efforts , I'm sure that an easy installer will be useful to someone. I believe that this tool deserves more response than it has received.
Sent from my LGL15G using Tapatalk
ibub said:
bash is necessary for using some build systems to compile android source code. If the OP wishes to donate his time and efforts , I'm sure that an easy installer will be useful to someone. I believe that this tool deserves more response than it has received.
Sent from my LGL15G using Tapatalk
Click to expand...
Click to collapse
I have no idea why I said that back then. I have been dailying Linux for years now and BASH is what I primarily use, also it's wierd because at that time was when I was migrating to Linux.
Greetings, and welcome to the home of a little set of utilities I'm calling "DroidShell".
What it is:
DroidShell is my attempt at bridging the gap between the various android utilities used for ROM modification and the Windows explorer system. It is a series of scripts that are automatically associated with .apk, .jar, and .iso files so that they are automatically decompiled on double-click or enter. Additionally, when a file is decompiled, a corresponding .dcp, dcf, or dci (decompiled package, decompiled framework, decompiled image) file is created, which allows for automatic recompiling, as well as optional cleanup, or resigning.
The goal of this project is pretty simple...to have all the tools needed for ROM work in one place, and have them easily accessible without having to have eighty command windows open or to have to go through a chain of commands to create a usable apk/jarfile.
Features:
One-shot setup. Extract the files, run install/installer.bat, and all of the necessary file associations and paths are created.
Batch terminal integration - provides integration for adb, fastboot, apktool, 7zip, zipalign, oat2dex, unpackbootimg, repackbootimg, baksmali and smali in windows command-line interface from path.
Automagic association with common android filetypes for decompilation.
Custom placeholder files - dcp, dcf, and dci - for packages, framework, and image files. Allows for automatic recompiling, and optional signing and cleanup of decompiled files.
Recompiled apks and jars are automatically repacked with modified files while excluding androidmanifest.xml, meaning signatures are unaffected.
For modifications requiring androidmanifest be changed, you can right-click a .dcp file to recompile with signature.
Auto-detection of framework-res file with prompting to install.
Popup dialogue boxes for errors and alerts.
(NEW) Right-click to decompile to java code. This cannot be recompiled, but is great for researching more complex mods. (Can also be invoked by using the command dj filename.apk)
(NEW) Support for sparse image system -> .img conversion.
(NEW) za command for zipaligning apk's.
(NEW)
Download:
https://github.com/d8ahazard/DroidShell/archive/master.zip
Source:
https://github.com/d8ahazard/DroidShell
Instructions...
You need the Java Runtime Environment (RE). Get it here.
Extract to a folder somewhere. Spaces in the path are probably not good. I put it in C:\DroidShell
Browse to the folder. Go into the install folder. Run installer.bat. (Installer needs admin priveleges. It will prompt for them, but in some cases, you may have to automatically run as admin)
Reboot.
You should now have shell integration. APKs, Jars, and .img files will automagically decompile.
It's late, I've been working on this all weekend...but it should be good to go. Please let me know if you have any thoughts.
CHANGELOG:
Code:
02.02.16 - v2.0
Update smali, baksmal to v. 2.1.1.
Add shell script for oat2dex (not implemented in context menus, just avaialable for now)
Update APKTool to latest version
Add dx.jar - for converting java classfiles to .dex (just available for now)
Add ext4 and ext2 tools - For manually unpacking images if needed. These are GUI based, not my work.
Add rimg2sdat - For converting .img to sparse (Not implemented yet)
Update sdat2img to latest version by xspirit, added python to installer as required.
Add zipalign function (Not implemented, can be called via "za filename.apk"
Add decompile to pure Java:
This utilizes a few tools to take apk's and jarfiles and decompile them to as close of an android package as we can get without having the actual source code. While we cannot at this time recompile these into apk's, it is very useful for analysis when trying to implement other mods. Like...really helpful. This one can be accessed by right-clicking a decompileable package and picking "decompile to java".
01.31.15 - v1.8
Added windows progress bar for file copies in system.img extraction.
Fixed some script errors.
01.29.15 - v1.7
Cleaned up installer, added more verbosity.
Better error checking in image extractor.
Add support for .list files, allowing double-click extraction of system.transfer.list and cm12-style image files.
Added custom language files for notepad++, allows syntax highlighting of .smali and logcat files.
01.27.15 -v1.6
Added support for system images. Requires installation of included OSFMount.
Added file associations for common plaintext android files to notepad++ if installed.
Converted several .bat files to .exe, allows for icons, inclusion of required files, and UAC prompting when needed.
01.26.15 - v1.5
Fixed fatfinger in APKtool detection causing error.
01.26.15 - v1.4
Added zipaligning
Added check to make sure apktool is present
Updated test-keys to latest AOSP version
Compiled batches to .exe with required files for AIO-packages
Fixed: Installer not always associating with files correctly.
Thanks a million
Version 1.5 uploaded.
Added Zipaligning
Check to make sure apktool.jar is found in %DROIDROOT% directory.
Updated signing keys.
Switch from .bat to .exe, allows modularization of functions, cleaner.
Modifications to installer to try and fix some issues with file associations.
Fixed issue between 1.4 and v 1.5 where I fatfingered a check.
Hell yes!
digitalhigh said:
Greetings, and welcome to the home of a little set of utilities I'm calling "DroidShell".
What it is:...
Click to expand...
Click to collapse
So many thanks for this! I'm going to use it like hell!
Excellent Job!
I'm bookmarking this, gona read it thuroughly at breakfas
So I'm curious - has anybody had a chance to give this a try yet?
Testing file association stuff is tricky, because Windows likes to keep track of the "user selected" association too. So, I had to add some extra commands to the installer script to clean up everything appropriately first.
Either way, I've ran it on like three different computers "clean" and had it work like a charm on all of them. I'd like to know how it works with WIndows 7 or XP.
I could be doing something wrong (windows is not my OS of choice, I use kubuntu 14.10 as my daily driver, and as such am mostly illiterate in dos/batch, I'm a sh/bash guy), but the installer bombed out (hung up without confirmation of success) on my windows 7 pro install (on a dell latitude e6400, with a dual core core2 @2.8ghz, quattro 160m graphics, 4gb of ddr2 @800mhz, booting off a 120gb Samsung evo ssd. Wouldn't think its relevant, but just in case).
Steps:
First I decompressed the .zip in the root of my C:\ drive, with 7zip (did not change file name, kept as "DroidShell_1.5").
Next I ran the installer script.
I then granted it admin privileges.
It killed my desktop, explorer.exe. I assume this is normal due to the terminal output:
Code:
SUCCESS: The process "explorer.exe" with PID 3260 has been terminated
Then I got:
Code:
file type 'apk_auto_file' not found or no open command associated with it.
Followed by 4 more identical errors, just replace "apk" with dfc, dcp, dci, img.
A bunch of successful operations.
Then:
Code:
ERROR: Invalid syntax.
Type "REG ADD /?" for usage
A bunch of successful operations.
Then:
Code:
ERROR: The system was unable to find the specified registry key or value.
The above output repeats 17 times.
Then 4 more operation success messages and it hangs, with my desktop killed.
Ctrl+alt+del, logout, log in, and I'm back in business. No noticeable increase in disk space, no newly installed programs (as expected).
I read the op, and from my understanding it doesn't require any dependencies? (Apktool, android SDK, android studio, etc). All the necessary dependencies are built in, right? It's a fresh install of windows 7 pro, with all available updates taken.
EDIT:
It worked perfectly regardless of the errors, see my post on page 2.
thisguysayswht said:
I could be doing something wrong (windows is not my OS of choice, I use kubuntu 14.10 as my daily driver, and as such am mostly illiterate in dos/batch, I'm a sh/bash guy), but the installer bombed out on my windows 7 pro install (on a dell latitude e6400, with a dual core core2 @2.8ghz, quattro 160m graphics, 4gb of ddr2 @800mhz, booting off a 120gb Samsung evo ssd. Wouldn't think its relevant, but just in case).
Steps:
First I decompressed the .zip in the root of my C:\ drive, with 7zip (did not change file name, kept as "DroidShell_1.5").
Next I ran the installer script.
I then granted it admin privileges.
It killed my desktop, explorer.exe. I assume this is normal due to the terminal output:
Code:
SUCCESS: The process "explorer.exe" with PID 3260 has been terminated
Then I got:
Code:
file type 'apk_auto_file' not found or no open command associated with it.
Followed by 4 more identical errors, just replace "apk" with dfc, dcp, dci, img.
A bunch of successful operations.
Then:
Code:
ERROR: Invalid syntax.
Type "REG ADD /?" for usage
A bunch of successful operations.
Then:
Code:
ERROR: The system was unable to find the specified registry key or value.
The above output repeats 17 times.
Then 4 more operation success messages and it hangs, with my desktop killed.
Ctrl+alt+del, logout, log in, and I'm back in business. No noticeable increase in disk space, no newly installed programs (as expected).
I read the op, and from my understanding it doesn't require any dependencies? (Apktool, android SDK, android studio, etc). All the necessary dependencies are built in, right? It's a fresh install of windows 7 pro, with all available updates taken.
Click to expand...
Click to collapse
Bombed out is a rough term. The installer is just writing a bunch of registry keys, and deleting some other ones to make sure other associations don't mess it up. So, some registry operations don't always work - there just there to be sure. I've actually worked on cleaning that up in the next iteration I'm cooking.
And yes, there shouldn't be any more size increase past extracting the original zip. All the files used are enclosed. "Installer" is just telling Windows that "droid shell is at location %CD%" and "use app xxx in %CD% to open file XX". A few extras for the right-click context menus and icons...so forth.
So, to know if it is working is really just a matter of finding an apk or .jar and double-clicking it. You should get a terminal window showing the process and a box confirming success or failure, plus a reason why if failure.
The only dependency is the Java Runtime environment, which is the same common necessity as for any other Apktool environment. You can get it here, and I'll throw that link in the OP in a second.
The next iteration of the installer is going to be a lot cleaner, plus be more verbose so you actually know what it's doing. My first thought in putting it out was just to see how well the decompile/recompile stuff worked.
Bombed out is a rough term. The installer is just writing a bunch of registry keys, and deleting some other ones to make sure other associations don't mess it up. So, some registry operations don't always work - there just there to be sure. I've actually worked on cleaning that up in the next iteration I'm cooking.
And yes, there shouldn't be any more size increase past extracting the original zip. All the files used are enclosed. "Installer" is just telling Windows that "droid shell is at location %CD%" and "use app xxx in %CD% to open file XX". A few extras for the right-click context menus and icons...so forth.
So, to know if it is working is really just a matter of finding an apk or .jar and double-clicking it. You should get a terminal window showing the process and a box confirming success or failure, plus a reason why if failure.
The only dependency is the Java Runtime environment, which is the same common necessity as for any other Apktool environment. You can get it here, and I'll throw that link in the OP in a second.
The next iteration of the installer is going to be a lot cleaner, plus be more verbose so you actually know what it's doing. My first thought in putting it out was just to see how well the decompile/recompile stuff worked.
Click to expand...
Click to collapse
I didn't mean to offend with the term "bombed out", it may have been a bit of a rough term. I just meant the script terminated my desktop and hung up.
It actually succeed regardless of the errors, and is working like a charm. I apologize, I should have actually tested it before posting. I shouldn't have assumed that it didn't work based off of the terminal output/behavior.
Also, I would like to say that I greatly appreciate the work that you put into this, and all your other projects here on xda. I'm running your 4.4.4 gpe port for the verizon m8 as my primary rom, and it is by far the most stable port I have ever had the pleasure of flashing.
Attached are screenshots of DroidShell successfully decompiling and recompiling an apk with a simple right click selection on windows 7 pro. Good stuff.
Thanks! tons
Thanks for the work. very useful.
The compiling and decompiling of apk is perfect on Win 7 pro.
From the OP, i also got the impression it would unpack / pack images, so i tried it with a system.img copied to the droidshell directory.
With the command c:\droidshell\unpackimg system.img, I got the error as shown in screenshot
Am I doing something wrong, or is this not supported yet?
arbit12 said:
Thanks for the work. very useful.
The compiling and decompiling of apk is perfect on Win 7 pro.
From the OP, i also got the impression it would unpack / pack images, so i tried it with a system.img copied to the droidshell directory.
With the command c:\droidshell\unpackimg system.img, I got the error as shown in screenshot
Am I doing something wrong, or is this not supported yet?
Click to expand...
Click to collapse
It only works for boot images at the moment. System images are a different beast.
Sent from my HTC6525LVW using XDA Free mobile app
digitalhigh said:
It only works for boot images at the moment. System images are a different beast.
Sent from my HTC6525LVW using XDA Free mobile app
Click to expand...
Click to collapse
Okay. Thanks for the info.
thisguysayswht said:
I didn't mean to offend with the term "bombed out", it may have been a bit of a rough term. I just meant the script terminated my desktop and hung up.
It actually succeed regardless of the errors, and is working like a charm. I apologize, I should have actually tested it before posting. I shouldn't have assumed that it didn't work based off of the terminal output/behavior.
Also, I would like to say that I greatly appreciate the work that you put into this, and all your other projects here on xda. I'm running your 4.4.4 gpe port for the verizon m8 as my primary rom, and it is by far the most stable port I have ever had the pleasure of flashing.
Attached are screenshots of DroidShell successfully decompiling and recompiling an apk with a simple right click selection on windows 7 pro. Good stuff.
Click to expand...
Click to collapse
Oh, no offense taken.
I came at this project, as I do with most, with the mindset of "OOOH, SHINY THING. I MUST SHOW EVERYONE." So, first thought was putting out the app, despite some of the install stuff being a bit dirty.
However, the next iteration is shaping up to be quite lovely. See below.
arbit12 said:
Okay. Thanks for the info.
Click to expand...
Click to collapse
So, it appears that this question has motivated me to try making that function a reality sooner than later.
However, as far as I can see, the *ONLY* application for windows that currently deals with system images right now is Ext2Explore, which is a bit old and doesn't have command-line support.
Fortunately, there's source code for it, so I'm currently downloading Visual Studio and will see if I can add command line functionality, as well as make it launch with UAC prompting.
If I can make this work, my plan is to make one handler for .img files that works like so:
1. Look at the file passed to it and see if it's a boot image. If it is, extract and exit.
2. If it's not a boot image, try to extract it as a system image. If it is, extract and exit.
3. If it's not a boot or system image - pass it to explorer and mount as usual.
I can do # 1 and #3 already...it's just getting #2 to go.
Also, I've added a check in the installer that looks for the installation of notepad++. If it finds it, it will create additional associations for .xml, .prop, conf, config, .smali, and whatever else I can think of that I could possibly need to edit in a ROM.
Then, lastly, with all these additions, I'd like to make the installer a bit more verbose. Give some options so it's not just an all or nothing install, make it prettier, etc.
digitalhigh said:
Oh, no offense taken.
I came at this project, as I do with most, with the mindset of "OOOH, SHINY THING. I MUST SHOW EVERYONE." So, first thought was putting out the app, despite some of the install stuff being a bit dirty.
However, the next iteration is shaping up to be quite lovely. See below.
So, it appears that this question has motivated me to try making that function a reality sooner than later.
However, as far as I can see, the *ONLY* application for windows that currently deals with system images right now is Ext2Explore, which is a bit old and doesn't have command-line support.
Fortunately, there's source code for it, so I'm currently downloading Visual Studio and will see if I can add command line functionality, as well as make it launch with UAC prompting.
If I can make this work, my plan is to make one handler for .img files that works like so:
1. Look at the file passed to it and see if it's a boot image. If it is, extract and exit.
2. If it's not a boot image, try to extract it as a system image. If it is, extract and exit.
3. If it's not a boot or system image - pass it to explorer and mount as usual.
I can do # 1 and #3 already...it's just getting #2 to go.
Also, I've added a check in the installer that looks for the installation of notepad++. If it finds it, it will create additional associations for .xml, .prop, conf, config, .smali, and whatever else I can think of that I could possibly need to edit in a ROM.
Then, lastly, with all these additions, I'd like to make the installer a bit more verbose. Give some options so it's not just an all or nothing install, make it prettier, etc.
Click to expand...
Click to collapse
Captain_Throwback said:
Click to expand...
Click to collapse
Don't get too excited. I've never touched C++ before, and ext2Explore was done in VisualStudio.net and a WYSIWYG editor called QT. I found updated source for the program from 2012 and have gotten it to import into QT, however, it needs MingW and some other dependencies. I'll be lucky if I can even get it to compile again, let alone work, let alone work with added command-line stuff.
However, that's still the goal.
Also, I want to add wget (windows equivalent) stuff to auto grab and install java and notepad++ while we're at it.
So, I think Ext2Explore is more work than it's worth.
OSFMount, on the other hand, just let me mount a system.img as a removable disk with read-write access. I'm going to go down this road...
Good to hear that. Extracting system.img on windows can be a real pain at times - this would be great.
Hello. Can somone tell me what is TMP-MKSH folder with one file. I deleted this unfortunately... is this important file? Can someone upload that folder with file? I don't remember permissions.
I'm on KK 80220h. Please help.
(1) BSD Reference Manual MKSH(1)
NAME
mksh, sh - MirBSD Korn shell
SYNOPSIS
mksh [-+abCefhiklmnprUuvXx] [-T [!]tty | -] [-+o option] [-c string | -s | file [argument ...]] builtin-name [argument ...]
DESCRIPTION
mksh is a command interpreter intended for both interactive and shell script use. Its command language is a superset of the sh(C) shell language and largely compatible to the original Korn shell.
I'm an Android user, so what's mksh?
mksh is a UNIX shell / command interpreter, similar to COMMAND.COM or CMD.EXE, which has been included with Android Open Source Project for a while now. Basically, it's a program that runs in a terminal (console window), takes user input and runs commands or scripts, which it can also be asked to do by other programs, even in the background. Any privilege pop-ups you might be encountering are thus not mksh issues but questions by some other program utilising it.
FILES
~/.mkshrc User mkshrc profile (non-privileged interactive shells); see Startup files. The location can be changed at compile time (for embedded systems); AOSP Android builds use /system/etc/mkshrc. ~/.profile User profile (non-privileged login shells); see Startup files near the top of this manual. /etc/profile System profile (login shells); see Startup files. /etc/shells Shell database. /etc/suid_profile Suid profile (privileged shells); see Startup files.
About Android L and SELinux
The developer preview of Android L hints at which restrictions for root apps, mainly with regard to SELinux, can be expected in future.*Chainfire*provides a very helpful, developer-aimed*explanation of the impact of SELinux*and thus I won’t dive into more details here.*Fact is: most root apps don’t work on the Android L developer preview.*At least, not yet. Development of root apps becomes more difficult. As a developer of a root app myself, I’m highly interested in understanding the reasons and fixing them as soon as possible. The restrictions present in the developer preview will most-likely be included in the official release of Android L and later versions. Further restrictions must be expected. Thus, even although the results I describe in this article show that superuser access can still be achieved (at least for some apps) it’s very well possible that these methods won’t work in a few months.
Setup
The following experiments were done on a Nexus 5 running the Android L developer preview. The device was rooted using the steps shown by XDA usersavoca*here. Thanks, savoca! Additionally,*SuperSU*2.00 by Chainfire was used. Thanks, Chainfire!
After setting up the device and rooting it, I tried to run my Android app RepetiTouch Pro. As expected, it did not work. Like many root apps, RepetiTouch uses an executable stored in its private app directory (under /data, e.g., /data/data/com.example.myapp/files/myexecutable) to handle the tasks which require superuser privileges. Trying to run this executable, called*eventserver*in this app, in a su shell results in
*
tmp-mksh: ./eventserver: can't execute: Permission denied
SELinux context experiments
Following this test, I experimented with various SELinux file contexts and additionally changed the file owner of this executable to root (the default file owner is similar to u0_a123). The file contexts can be listed via*ls -Z*and changed via the*chcon*command which is part of Android’s toolbox. Example:
#*
*
#*
#*
*
ls -Z eventserver
-rwx------ u0_a88 u0_a88 ubject_r:app_data_file:s0 eventserver
chcon ubject_r:system_file:s0 eventserver
ls -Z eventserver
-rwx------ u0_a88 u0_a88 ubject_r:system_file:s0 eventserver
SuperSU supports the*-cn/–context*argument to set the SELinux context, e.g.,
$*
su --context u:r:untrusted_app:s0
The default context is u:r:init:s0.
There were different results/errors:
“./eventserver: can’t execute: Permission denied” with error code 126 and different shells prepended, e.g., “tmp-mksh: ./eventserver: can’t execute: Permission denied”. For this error,*exec error*is used in the following.“error: only position independent executables (PIE) are supported.” with error code 1. For this error,*PIE error*is used in the following.success (which only means that the file could be executed, it still might not get access to other files or resources)
Default file context (ubject_r:app_data_file:s0)
su contextdefault ownerroot owneru:r:init:s0tmp-mksh: exec error tmp-mksh: exec erroru:r:untrusted_app:s0sh: <stdin>[1]: exec errorPIE erroru:r:system_app:s0sh: exec errorsh: exec erroru:r:system_server:s0sh: exec errorsh: exec error
_____________________________________Read more write less and be smart