THE DEVICE GETS VERY STRANGE PROBLEM....
IT'S CHALLENGE FOR OUR DEVELOPMENT TEAM
IT JUST STARTS WITH BLACK SCREEN SHOWING THE MESSAGE :::
""""""""" THIS OPERATION WILL DELETE ALL YOUR PERSONAL DATA,AND RESET ALL SETTINGS TO MANUFACTURER DEFAULT.
PRESS ACTION TO RESTORE MANUFACTURER DEFAULT,
OR PRESS OTHER KEYS TO CANCEL """""""
BUT THE PROBLEM IS NO BUTTON IS WORKING AFTER THIS MESSAGE & ALSO IT CAN'T GOES INTO THE BOOT LOADER MODE.
WHEN TRYING TO CONNECT IT WITH ACTIVE SYNC OR TRYING TO FLASH IT THE ERROR MESSAGE APPEARS THAT IT CAN'T CONNECTED..
THE QUESTION IS HOW TO FLASH IT AND HOW TO GO IN TO BOOT LOADER
REMARK : DEFAULT KEYS OR ANY KEYS ARE NOT WORKING JUST BLACK SCREEN WITH WHITE FONTS..
Think nobody knows how to overcome from this problom..
Where's the masters ??????
it seems that nobody knows how to get rid from this problom......
Read the stickies for troubleshooting... and do not start a brand new thread without reading first.
Related
Hi,
is there a possibility to get my device back to work? I messed my G500+ up, with a wrong ROM Image, so is there a way to low level format it and replay a working Image on it?
The current status is:
The device can be turned on, but only the LED in the upper right corner is flashing
The blue outline will be present after holding the power key for several seconds (aproximately about 10-15 seconds or so)
The display stays black
I can't see if I would enter the USB downloader boot mode
I can't see if I do a hardreset
The display was fully white after flshing with this damage rom, then during boot it stayed white and the device stocked
Can anybody help me? Is my display damaged, can such thing happen while flashing or does the ROm don't kno w how to reach the display? What can I don, it's a bit urgent because I need that device!
As posted on your other thread, this is an HTC based device forum. You're better off looking for help on a site that will support your device. Good luck.
yeah, you're right, but there are several threads about Eten devices, so I thought, someone could help, sorry....
Searching for some mods for my Touch HD I installed "GODZSON FONTS FOR TF3D" I didnt like em so i unninstalled, but I didnt restart as my Phone asked!!! Then I installed "HTC COLOURED TOP BAR" and restarted--- phone booted went to the green windows mobile screen, and it doesnt go further it just stands there in that green screen!!! -- Tried resseting and tried booting without SIM CARD and MEMORY CARD (all my programs are on the device)!!! but it still goes to the windows mobile screen and doesnt go further!!!! all the programs are from xda-developers !!!!
PLEASE HELP!!!!!
why did that happen and what should i do!!!
PS after a long waiting the device shows "the device is unable to boot....(stuff about software)...Press SEND to reset your device or press any other button to cancel, this operation will delete all your personal data and restore the device to its factory default setting.""- an a white line below it!!! --- where is the send button and how can I reset back to factory settings!!!
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone
read the wiki normaly you hardreset inside the bootloader
the wiki should include how you enter the bootloader
this is don before the device is started up so the fact that yours
can't start fully up should make no difference
Last night I try One Click Lag fix made by RyanZa, it seems that it didn't work as I found in the windows that permission denied and after check from Quardant Standard, it still 889, I have used Busybox 1.17.1.
And then I tried the solution made by Tayutama http://forum.xda-developers.com/show...&postcount=417
I manage to have the new app MCR Scrips in my app list and click LagFix1024.sh. There is a note ..... wait for long time....., during this process, my screen keep going to be blank screen... and suddenly it is blank, even I have tried to soft reset, it is still blank, just appear the samsung logo, samsung sound and then no screen but blank.
I am panic then and got the idea to flash it, Hold down down+powerbutton+Menubutton, it can go to download mode and can flash to I9000DXJG4 until complete but can not boot.....
The device still look like in shut down.
I plug off the cable and then Hold down up+powerbutton+Menubutton try to reboot, samsung logo and after that sound and than keep in blank screen......
Please help .... please .. please... I don't have any idea what should be done next....
Thanks a lots before
i just downloaded and installed the android 10 system update from the ASUS download centre and after installation completed the phone worked for a while and then it suddenly got locked and after a sec it started showing black screen and the navigation buttons and status bar are flashing (popping out and going in) and it occasionally also shows the lock screen for a brief moment. I have tried going into safe mode and this issue still happens. is there a way i can fix this without hard resetting the phone? i was editing the quick access menu options just before the phone got locked if that helps. please help. u can find a video of the phone in attachments or here
https://imgur.com/a/HBjwq0P
. (sorry for the bad english. its not my native language)
You able to reboot to bootloader?
Hello, I have an Android device of which I do not know the brand and model (I will attach photos). The problem is as follows, after I installed the Waze application, the device wrote that there is no free disk space and restarted, from here to there it loads only until the inscription android. I've read all the reset articles and all sorts of combinations, but I'm having no success getting into recovery mod. Please someone help me. Thank you in advance!
At least someone tell me what the model is or where I can see it?
Hello, I solved my problem and if it can help someone, I will write how. If the moderators deem it unnecessary to delete the topic.
So the model is 8221l and entering recovery mode is done as follows:
1. you press the reset button
2. you immediately start pressing on the touch screen with 5 fingers, it should say "recovery mode"
3. if you did it right the display says "erasing" then it will say ANDROID again
4. wait for 2 minutes and power off the device
5. restore power and the device will boot back to 100%
6. if you want to update the firmware, do everything but with the difference that in point 2 you have to press with 4 fingers!!!