I got my X10i a mere week ago, and I'm loving the phone, a few minor flaws of course, but nothing I can't live with (for the time being...I was looking forward to Froyo..!), except this one issue which is causing problems in work-situations;
When both WiFi and bluetooth are enabled at the same time, the phone will disconnect your bluetooth device. I'm using my MW600's which came with the phone for handsfree, and I have my phone set to sync with my mail, I leave it on WiFi while in the office so it keeps my exchange mail etc up to date, and won't have to fetch that when I'm out all the time, and if I receive a phone call I'll take it on the handsfree (because typing on a computer while holding a phone between your head and shoulder etc is uncomfortable).
Now, the phone will try to sync with my mail while I'm in a call, effectively cutting the bluetooth and leaving the phone quiet until it's done with the disconnection procedure (usually lasts for 5-10 seconds!) upon which I can hear the partner just fine on the regular phone again.
It can be left to sync over 3G just fine while I use the handsfree... I am quite distressed by this as I need a reliable phone for use at work, and this one cost me quite a bit to get and I am unable to get any other phone, as I had to get it with no provider attachments so I could continue using my work sim-card.
Anyone else had these issues, or maybe even found a sneaky way to get around it (Hell, if I had some multitasking when receiving/being in a call, I could disable the wifi when receiving a call)?
Which application do you use to sync?
Sent from my X10i using XDA App
Using Moxie Mailer, it came with the phone, since 1.6 doesn't support exchange ... (another letdown when I first got it, haha)
Same here. I can not use bluetooth headsets and Wi-fi at the same time. When Wi-fi enabled bluetooth connection breaks when I try to listen to music.
bluetooth headsets SE HBH-DS205
Related
Right people i need some advice, on my vario 2 when i use the internet over bluetooth on my laptop it works great until you really put it through its paces, i.e lots of downloading, page surfing then it will just disconnect and i have to reconnect the dial up networking and re-establish the connection before i can use it again. Sometimes i get get a message pop up on the device saying "Bluetooth hardware fault" other times i dont.
Has anyone else had this or is it time for my 5th replacement?
I am having this horrible issue with my Wifi and bluetooth.
1. WIFI: When I turn on WiFi after a reboot it works flawlessly, connects to my wifi network and I can zoom around the net just dandy. As soon as I go out of range of WiFi or manually disconnect it it will NOT turn back on it says "Unable to start Wifi" until I do a full reboot. So annoying.
2.) Bluetooth: When connecting to my Headset it connects just fine after a reboot. HOWEVER, after pairing, if I put the X10 standby with the powerbutton before making a call it will drop the bluetooth audio connection and only play sound through the earpiece. Even though it SAYS it's still connected and paired. And THEN when I shut off bluetooth and try to turn it back on, pretty much the same as the wifi thing except I get no error message it just tries to initiate bluetooth and then sits for a few minutes and then I guess gives up and keeps the bluetooth shut off without any indication of failure.
I'm guessing it's defective but if anyone has had this issue, please speak up! And even better if you know how to solve it. Thanks!! =)
I too am having the same issue with wifi. Also my x10 is superslow on my wifi @ times. So i run a speedtest and I get 3MB, which is fast, but the phone isn't using that speed while browsing the internet.
Hello,
I experienced the same thing as you. Moreover I have a trouble with Bluetooth in my car. After few seconds (around 1 minute) of talk, I don't loose the BT connexion but nobody understand me !!!
Have you tried your BT?
Have you got a task killer running that's killing your bluetooth and wifi?
Sent from my X10i using the XDA mobile application powered by Tapatalk
Hi all!
I started again a new thread where i write down my findings in the MR2 release of the X2. It's originally on the Esato-forums, so i just put the link over here:
http://www.esato.com/board/viewtopic.php?topic=196737
Nice THKS.
7. When hanging up a phonecall, the phone makes three loud beeps via the rear speaker. WHY???
same here... but only if the person u talk to hangs up first. its so annoying.
Lerka said:
7. When hanging up a phonecall, the phone makes three loud beeps via the rear speaker. WHY???
same here... but only if the person u talk to hangs up first. its so annoying.
Click to expand...
Click to collapse
YEp, and having the phone on silent does not make things better either...
Fix
i used registry editor and changed the value of calldrop from p(play) to none.
Rene,
when you hear 3 tones after call finish - is bluetooth activated in this moment for your x2? For example, do you use BT connection to your X2 in your car (handsfree)? Do you think that there is some special requirements for BT headset using to generate this sound on main unit if call was finished?
when you see bad power consumption results - is wifi activated in communication manager in your X2? I think that if you activate wifi - it can be reason for huge additional current if unit can't find appropriate wifi network for some reason.
For example, I found that if I activate wifi - I always should connect unit to charger every day. Then I found that this is specific issue only for me. The specific way of my wifi using is followed - I use 2 different wifi connections to my X2 (on home - secured network through router and in office - open wifi network). I do have connection issues every morning in office and every evening in home. Even if my X2 reports that it's connected to office network - I can see in status bar in Today screen that it's trying to conect again and again - and also I can't use browser or Goggle maps because no data connection is available through wifi. After I power off/on my unit - it can really connect to office wifi network and I can use browser and receive mails e t.c. When I return to home, I see that unit still be connected to office network - but it's impossile. And again - I can't use browser or receive mails by using my X2. After I power off/on unit - it can connect to home network. I can't fix issues in office and in home just turn off/on wifi in communication manager - issue still be actual after this. So, what I do every day - I turn off/turn on my unit every morning after arrive to office and again power on/ power off unit every evening when arrive home So I should spent 2 minutes every morning and 2 minutes every evening to reboot unit. On other hands I think that this is step to avoid more serious issues after couple of days of Windows using - you know usially you can see performance degradation after 1 week of using of any WinMob device - looks like this is result of lot of memory leaks, memory corruptions inside MSFT SW.
if we are talking about unexpected password issue or issue when you can't unlock unit by LOCK icon sliding left or right after press on power on button - for me it looks like memory is corrupted in MSFT lock app. As result some password is requested even if user never activates this password for lock screen. But it's clear that in reality, unit doesn't story in memory any password to compare with entered one - otherwise after power off/on sequency unit still ask password from you. But as I see in the same situation with my X2 - after I remove/insert battery and power on unit - I never see again this issue just after unit goes to Idle.
I think that memory, which is used by MSFT Lock code, can be corrupted only in scope of the same Windows process (of cause if memory is isolated for all processes in WinMob - I hope it's true) - so only other MSFT code can corrupt this memory. Do you know about any public forum where we can ask help from MSFT to see in this issue? I never see that Aaron wrote anything about any contacts in MSFT - but I think that MSFT should be also responsible for any product if Windows logo is applyed to device with WinMob?
To reduce the probability of this issue I never use AutoLock and always lock unit by click on Lock icon in Today panel or by long press on right HW kwy (with key sign).
darkbuster5 said:
i used registry editor and changed the value of calldrop from p(play) to none.
Click to expand...
Click to collapse
IT WORKED!!!
thank youuu
wifi
Hi! I have a similar issue with the wifi that PanichUS described.
The phone sees the network, tells that it's available, but I am not able to connect to it (so I can not do internet browsing, read the emails, etc.)
This happened to me while switching from one network to another, which were in two different places (and the phone was showing the network still available of the place I have already left). But in my case rebooting the phone did not help.
This is not the only case. The same thing also happens to me after I use bluetooth. The phone is connected to the wifi network (I could do internet browsing, etc.), I use bluetooth, and after that I can no more recover the connection. Again it shows that the network is available, but I can not connect to it.
The only thing which helped by now was restarting my house router.
Is the MR2 the last release of the firmware by date? I have bought my phone recently, and for me it seems that it was updated: I have radio, and the theme with grey background (X2 Titan) was activated in the very beginning.
MR2 is last update for X2. Don't wait another update.
Try turn off Wifi in Communication manager before power off and turn on Wifi back in Communication manager after power on.
Wifi
I have discovered that in fact I don't have problem to connect when using an open network, while with the protected one is always an issue.
Reboot of the phone doesn't change anything even if before doing it I switch off wifi in the connections manager and delete all the settings. Nothing - only reset of the router what helps.
I also tried to use other software (Wifi Monster) - the same thing.
The phone is really wonderful, it really has it's spirit with all these panels and generally the interface, but the wifi issue is really annoying!
My advice - don't install Resco Photo manager on X2.
Great app but works very bad on X2.
I instaled older version Resco.Photo.Manager 7.03. This work good.
Wisbaradvance 4.05 is verry unstable,problems and problems.
hi
Im running the stock JK6 and rooted.
when Im running e.g. the liveview app my phone keeps some kind of freezing after a few minutes, first I tought it is app related but now I revieved my OBD2 scanner for my car and its just the same with the app "torque".
is this a hardware related problem or something wrong with this ROM.
did a HR several times and reflashed the ROM.
Edit: I noticed when bluetooth recieve or send data I cant get any other wireless date like on wifi or on radio.
please help
Seems to be a one time event with the data problem but the main thing keeps annoing me
Have you tried pulling the battery waiting 60 seconds placing the battery back in the phone and then rebooting?
Eh no cause on the galaxy tab the battery cant be removed
NightFire123 said:
hi
Im running the stock JK6 and rooted.
when Im running e.g. the liveview app my phone keeps some kind of freezing after a few minutes, first I tought it is app related but now I revieved my OBD2 scanner for my car and its just the same with the app "torque".
is this a hardware related problem or something wrong with this ROM.
did a HR several times and reflashed the ROM.
Edit: I noticed when bluetooth recieve or send data I cant get any other wireless date like on wifi or on radio.
please help
thanks
Click to expand...
Click to collapse
I don't Know, but if you have a Bluetooth PAN connection to the internet, then it should be not possible to have another connection to the internet. IP routing to the gateway would be confused if you could.
There are tools that "group" several separate internet connections into one virtual one.
no Im not using a bt PAN to connect the inet, only normal bluetooth data usage
Push
Just only me who is facing this annoing problem?
Same problem with OBD2 :s disable GPS reduc freeze loop. But not fully (30 minutes). Next time i will turn off Data conection.
Every time i've freeze now i see torque try reconnect to OBD2, seem like BT of SGT turned off or time out
I am having the same problem. As long as I have bluetooth turned on, it will hang the Tab within 30 min. All bluetooth connections are definitely gone. Turning off the bluetooth won't help. The only way is to reboot and never turn bluetooth on.
BTW, I have tried connecting LiveView or a normal bluetooth headset. Both cause the same problem.
I am on JK2.
It seems it is bluetooth driver conflicting with any other data connections.
Did a further testing. Disabled Wifi, but doing data communication via 3G network while turning bluetooth on. The tab hangs in a few minutes. Found a process called 'btld' sucking up all the CPU circle.
Any ideas what 'btld' is?
Thought this should not be a hardware problem because bluetooth works fine when all data connections are off and Wifi/3G data works fine when bluetooth is off. It must be some sort of default setting isn't correct. If this is the case, then root would be a must before manually tuning any parameters.
Found root cause. It is actually the SonyEricsson LiveView software causing troubles. After removing, everything goes well.
Checked on SonyEricsson's web site, it seems Froyo is yet to be supported.
try to use WO Webcam B-Lite out of market, you can open a bt connection by pressing activate and then while running, close via taskmanager, voila the freeze begun
I've got galaxy Tab and galaxy S, and torque badly freezes the devices almost every time I exit the application. It cannot be an hardware fault since I use lot of bluetooth devices and always 3g connected, never had issues. Just with torque, and I don't have any "sony liveview" thing.
Reading on the comments of Torque it seems that also other devices have the same freeze issue (especially a phone called "Evo 4G"). Many months ago I sent a mail to the developer explaining the bug but he bumped me away replying that the app is tested and working on GalaxyTab (and obviously it's not true, or he did some mistake in testing). Now lots of people with this Evo 4G are complaining and the developer is trying to fix. let's hope..
Hi guys.
I have some strange (i think anyway) WIFI behaviour that drives my crazy, im looking for some help resolving it.
My WIFI seems to go into hibernation/sleep even though i explictly set if to never off in the WIFI settings. I notice this problem because my exchange sync fails constantly (only on WIFI, on 3G everthing is perfect). I notice this problem occours when the phone hasnt been used in a while.
After its been in hibernation mode it very slow to get connection again. I open a browser and need to press "refresh" numerous times (about 15/30 sec. i think before this WIFI i "back").
Any views on this problem? hardware related? software related?
My device is running custom ROM, custom Radio, Rooted ect.
Thanks in advanced.
Happens on stock Rom too actually. Happens to the x10 mini and mini pro too actually. Software issue?
Sent from my Desire HD using XDA App
**** phone happens to me when I'm in my bed room lose connection all the time and when you want it to connect agian you have to go into settings and WiFi and then it starts looking for it in steed of re-connecting Its self
Seem crazy if this is normal behaviour..
It makes the push email notification useless when im on WIFI. I need to manually sync to test for new emails (and even the sync fails, until the WIFI connection is restored..), need to wait 30 sec to go online, check facebook, twitter etc.
Can anyone else confirm/unconfirm this is normal WIFI behaviour?
Hah, mine doesnt find any wifi hotspot not the mine nor the one of my neighbors
while my HD2 connects easily to all of them, also having bluetooth problems anyone can confirm the buetooth and wifi of the phone are bundled?
calling htc tomorrow
I also have a problem: when I enable the n-setting on my router while I am having a WPA2 encryption and the SSID broadcast is disabled, my DHD doesn't find the access point. When I disable the n-setting, my DHD does find the access point
Sent from my Desire HD using XDA App