I rooted my hero last night and tried out a few different ROMs but eventually decided to revert to stock and make some manual changes. I used nandroid to restore to just after the root (1.56.651.2). I was able to remove some apps using adb, but the adb remount command fails (permission denied), and I'm unable to push a new bootscreen on to the phone. I also tried a Root File Manager and pre-kitchen as alternatives for the bootscreen, and neither one works. The Root Manager won't paste the files from SD into /system/media/ and pre-kitchen just reboots the phone.
Any suggestions?
Any chance this has something to do with downloading only up to SDK Platform 1.5? I'm at a total loss. I RUU'd my phone, did a clean root at startup using adb shell, and I still have the same problem. The adb remount command won't work, and I can't push anything into the system directory. For what it's worth, when I still had Root Manager installed I was able to toggle RO R/W in any directory with no problem, and I could move files around within the ROM... but I couldn't move anything into it from the SD. I'm new at this, so I have no idea what the problem might be. Anyone else had this problem or have any suggestions?
If anyone else runs into this problem, this solution worked for me:
adb shell
# su
# mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
# chmod 777 /system (Or any subdirectory you want to push to inside system)
# exit
adb push <local file> <device location>
Restore modified permissions when done.
Though I'm still not sure why this is necessary in place of adb remount.
I'm pretty sure the adb remount command will not work on the stock rom. You should be able to do it with just this command instead:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
dametzg said:
I'm pretty sure the adb remount command will not work on the stock rom. You should be able to do it with just this command instead:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
Click to expand...
Click to collapse
Thanks... didn't realize stock wouldn't accept adb remount. If I use the above line from within shell, that doesn't help me push anything on to the phone though... so I needed to enable global permission and then do the push. Oddly enough I tried the same approach last night using Root Manager, and the transfer from SD still failed, even after I applied 777 to the dir I was trying to modify. The current solution may be kind of tedious, but at least it works.
you really shouldn't do 777 on your filesystem, ANY app can then write to your system, overwrite things, or install malicious code. Just remount manually and you should be able to push anything you want, just remember that w/ the stock rom you also don't get a full busybox either.
I'm not positive, but I would think after you remount, you should be able to "adb push" to /system. I suppose it might be specific to that shell, but I would think not.
You just may have to do it once each time you boot your phone.
Edit - err nevermind... you're having permission errors.... um... change adbd on the phone to run as root? not sure how off the top of my head...
Someone please tell me what I'm doing wrong:
C:\Users\[my name]> cd C:\android-sdk-windows\tools
C:\android-sdk-windows\tools> adb devices
List of devices attached
HT9ADHG05719 device
C:\android-sdk-windows\tools> adb shell
# mount -o rw,remount /dev/block/mtdblock3 /system
mount -o rw,remount /dev/block/mtdblock3 /system
# adb push recovery-ra-eris.img /sdcard
adb push recovery-ra-eris.img /sdcard
adb: not found
#
I had to enter adb shell and hit enter before inputting the rest of that command just to get past that step. I tried doing the same with the next step and entering adb push separately but I got this:
# adb push
adb push
adb: not found
#
Does anyone know what I'm doing wrong or leaving out? I have the recovery and flash saved to the tools folder of my sdk.
you cant use adb push from inside a shell
That's what the "how to root" instructions are telling me to do.
joshw0000 said:
That's what the "how to root" instructions are telling me to do.
Click to expand...
Click to collapse
looks like you are "separating" steps...
3. Open up a command prompt and go to your tools directory, and execute these commands:
* adb shell mount -o rw,remount /dev/block/mtdblock3 /system
* adb push recovery.img /sdcard
* adb push flash_image /system/bin
* adb shell chmod 755 /system/bin/flash_image
* adb shell flash_image recovery /sdcard/recovery.img
(Taken from this thread: http://forum.xda-developers.com/showthread.php?t=647707)
your command is "adb shell" (which is going to shell... in which, anonomouse is correct, you cannot "adb" inside a shell). instead, type 1 command like this:
- adb shell mount -o rw,remount /dev/block/mtdblock3 /system
re-read the thread (link i posted) again... you're close
from your post... you'd have to exit shell... then get back to a DOS prompt... then do the "adb push" command
If I type the adb shell mount command together I get an error. That's why I broke them up.
So basically, once in the tools directory, I should be able to copy and paste the commands (which is what I was doing)? I would need to get back in front of my home pc and I'll tell you what error I'm getting. I believe it was "adb: not found".
If I type the adb shell mount command together I get an error. That's why I broke them up.
So basically, once in the tools directory, I should be able to copy and paste the commands (which is what I was doing)? I would need to get back in front of my home pc and I'll tell you what error I'm getting. I believe it was "adb: not found".
Linux or windows
Nevermind.... i reread your post. Sorry.
joshw0000 said:
If I type the adb shell mount command together I get an error. That's why I broke them up.
So basically, once in the tools directory, I should be able to copy and paste the commands (which is what I was doing)? I would need to get back in front of my home pc and I'll tell you what error I'm getting. I believe it was "adb: not found".
Click to expand...
Click to collapse
Make sure your sdcard is not mounted, it should be in charge only mode. Also make sure USB Debugging is on.
My phone was in charge mode and USB debugging was enabled, thanx.
joshw0000 said:
My phone was in charge mode and USB debugging was enabled, thanx.
Click to expand...
Click to collapse
You can use the application in this thread to help ease the process. They automated the commands through scripts to help in these situations. Plus, ECLIPS3 and Jamezelle do great work!
http://forum.xda-developers.com/showthread.php?t=661413
joshw0000 said:
If I type the adb shell mount command together I get an error. That's why I broke them up.
So basically, once in the tools directory, I should be able to copy and paste the commands (which is what I was doing)? I would need to get back in front of my home pc and I'll tell you what error I'm getting. I believe it was "adb: not found".
Click to expand...
Click to collapse
First the solution and then the explanation; note that I have included the command prompts here:
C:\android-sdk-windows\tools> adb shell
# mount -o rw,remount /dev/block/mtdblock3 /system
# exit
C:\android-sdk-windows\tools> adb push recovery-ra-eris.img /sdcard
C:\android-sdk-windows\tools> adb push recovery-ra-eris.img /sdcard
So, here's what is happening.
When you "break up the command", by making the first part the single line
Code:
adb shell
What you are getting is an interactive shell running on the phone. That shell does not terminate immediately; you can type an unlimited number of commands into it, one after another.
When you issue a command (from the PC's command window) which looks like this:
Code:
adb shell programname arg1 arg2 arg3 arg4
something a little different happens than in the first example: the program "programname" is launched on the phone, with the arguments "arg1", "arg2", et cetera - and the "shell" on the phone terminates as soon as "programname" is finished running
Note that the command prompt changed!
C:\android-sdk-windows\tools>
vs
#
So what happened? "adb" is a program on the PC, and NOT ON THE PHONE. When you typed "adb blah blah blah" into the interactive shell on the phone - guess what? you see "command not found".
If you insist on "splitting up the command", then go ahead (although I really don't see any reason why it wouldn't work in it's original format); just bear in mind you are typing commands into an interactive "command prompt" that is running on the phone. When it comes time to run other "adb" commands - you need to be at the PC's command prompt
bftb0
Thanks for the info. You were right. I had just screwed something up when I typed it in the first time. Explaining the steps really helped me to understand what I was doing. I entered the commands as you had them in the tutorial and it worked perfect. So after that I created a backup and attempted to flash a custom rom:
I just ran a nandroid backup for my Eris which was at stock 2.1 w/ root. I first partitioned the sd to swap - 3072 MB, ext2 swap 3072 MB, and fat32 - remainder. Realizing this was stupid, I went back and changed the partition to swap - 0, ext2 - 512 MB, fat32 - remainder 7680 MB or 7.5 GB. I moved ext2 to ext3 and booted the phone. All my sd was cleared so I copied everything back on (I saved all sd contents to my computer prior to this). I went back to recovery and flashed Eris Lightning 3.02. Everything went successful and when it rebooted, I saw the droid guys, then the "quietly brilliant", then "Verizon" screens. It then began running the "quietly brilliant" and "verizon" screens over and over. I pulled the battery and powered up again but it's still running those two screens over and over. I booted into recovery and attached my phone to the computer. I opened command prompt, entered " sd C:\android-sdk-windows\tools" and then entered "adb devices". It reads "List of devices attached" but there are none. I attempted to add the driver back to my device but when I go to device manager and click "update driver" and point it to the tools directory in SDK, it says that "Windows could not find driver software for your device".
If I can't communicate with my phone via usb and it wont boot, how can I get it to recover?
Any suggestions would help, I'm scratching my head here. I really don't want to have to buy another phone.
It turns out I was just having another newbie moment. I did a wipe and reflashed the rom and it worked perfectly.
Hi I have been trying all evening to remove com.wsandroid.apk from my phone, using terminal but I simply cannot. I've tried many different commands and I'm just being told either permission denied, directory not found/not empty. I have a Wildfire which is obviously rooted. Please help me out, tearing my hair out here.
So you're using modaco custom rom?
Download the latest version of HTC Sync and install. This will also install the adb drivers. (I presume you use windows, if not, I apologise)
Download the Android SDK
Put the phone in fastboot mode (Power+Volume down) and plug it into your computer.
When the drivers are installed, use the command prompt to navigate to the tools folder within the android sdk folder.
Type the following commands, pressing enter at the end of each line:
adb shell
mount -o rw,remount -t yaffs2 /dev/block/mtdblock03 /system
cd app
rm -r com.wsandroid.apk
That should do it
I'm using the stock ROM but it is rooted with Unrevoked. I'll try these instructions anyway.
- Connect your phone to the PC
- Clear WaveScure's cache on the phone
- Open a command prompt
- go to run go to C:\androidSDK\tools and then run these 2 commands
1. adb remount
2. adb shell rm /system/app/*wsandroid*
Click to expand...
Click to collapse
I'm trying these settings, but when I get to adb remount, I get this error: remount failed: Operation not permitted
EDIT: I put the phone into recovery mode and mounted it and it said remount succeeded, I then followed step 2. both *wsandroid* and com.wsandroid.apk and it says that they cannot be found.
EDIT: Nevermind, deleted it
There's currently no write access to system partition using Unrevoked on Wildfire. So you can't remove it. You flashed it with update.zip? I'm not an expert (yet) but I assume the only way (or easiest way) to remove it is to flash your stock ROM again.
It took some doing, but after following the instructions in this link:
http://forum.xda-developers.com/showthread.php?t=2559915
I was finally able to root my Nook Glowlight. The instructions are kind of sprawled out and extremely unclear so I will sum up.
As always, you will need the ADB. In order to install the ADB, you need the Java Development Kit and the Android Studio (formerly known as the Android SDK)
http://www.oracle.com/technetwork/java/javase/downloads/index.html
http://developer.android.com/sdk/installing/studio.html
How to obtain root via ADB: The ONLY way you can root is using Windows. I was successful on Windows 7 32 bit, but it may be possible on other versions.
step 1) install bootloader driver.
You need to grab the drivers from here (bnusbdrivers.zip):
http://forum.xda-developers.com/showpost.php?p=49665945&postcount=279&nocache=1&z=184593200683593
then, open the Device Manager (on Windows). Be ready to right click on the new device 'omap3660' that shows.
With the nook turned completely off, plug in a USB cable. you will have less than 3 seconds to right click the new omap3660 device that shows up in the system profiler.
If you were successful and you right clicked on it in time, manually install the Barnes & Noble USB driver (there are entries added to the generic Google drivers for both the TI Omap 3660 bootloader and the ADB device after you modify the uRamdisk later on)
***NOTE***
If you WEREN'T successful on your first try (took me THREE times to get to it in time), you aren't going to get another chance to install the drivers. At least not easily anyway, because after Windows tries to automatically install the drivers for the bootloader and fails, it will disregard the device any time it shows up after that. So, you are going to need to delete the registry entries that it created, which in my experience was easier said than done. Even admin access was not sufficient to make the necessary changes to the registry.
You will need to launch regedit.exe using another tool called psexec which is available here:
http://technet.microsoft.com/en-us/sysinternals/bb897553.aspx
after you download the pstools package, copy those .exe files to C:\Windows\System32\ (in order to add them to $PATH in cmd.exe)
Then, once you've installed the pstools commands to C:\Windows\System32\, run cmd.exe as admin (right click it and select 'run as administrator') and then open regedit.exe with the following command
Code:
psexec -s -i -d regedit.exe
Then, once regedit is open you need to find the keys created by the Nook bootloader and delete them. The Nook bootloader's device ID is 0451:d00e
You are going to be looking in HKEY_LOCAL_MACHINE\Current Control Set\enum\usb\ for the keys with the bootloader's device IDs. There may also be keys generated in control set 001 and 002 as well. Delete all of those keys and then reboot your computer. Then with the nook power off completely, repeat the process from the first step. eventually you will be successful installing the bootloader driver.
Step 2) temporarily boot with uRamdisk-noogie
you need to download omaplink.exe from here:
http://www.temblast.com/android.htm
and you also need to download the four files which allow you to temporarily mount the boot partition; omap3_aboot.bin, u-boot-ng2-exp-v03.bin, uImage-ng2-130-stk and uRamdisk-noogie.
They are available here:
http://forum.xda-developers.com/showpost.php?p=49779966&postcount=285
download usbboot-ng2-images-noogie-v1.zip
The next part is easy.
Extract the .zip file and then fire up cmd.exe. cd into the directory of the newly extracted .zip
in the new working directory, enter the command
Code:
omaplink omap3_aboot.bin u-boot-ng2-exp-v03.bin uImage-ng2-130-stk uRamdisk-noogie
Then, with the Nook powered all the way off and omaplink running, plug it in and a few seconds later, after the device boots up all the way, you will be looking at the contents of the boot partition instead of the internal storage like normal.
Step 3) Edit uRamdisk
you will need to download bootutil.exe from here
http://www.temblast.com/android.htm
copy bootutil.exe to C:\Windows\System32
with the boot partition mounted, copy uRamdisk to your computer and extract the files init.rc and default.prop, eg;
Code:
bootutil /x /v uRamdisk init.rc default.prop
then using notepad++ (available here: http://notepad-plus-plus.org/) edit the files as follows
default.prop
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.service.adb.enable=1
and
init.rc
comment out lines 375 and 392-399
(do this by adding a # to the beginning of the line)
uncomment line 215
(do this by deleting the # at the beginning of the line)
save both files and then repack them into uRamdisk
Code:
bootutil /r /v uRamdisk init.rc default.prop
copy uRamdisk back onto the Nook, eject the disk and power off the device. Reboot and you should be able to connect to ADB via WiFi
eg;
Code:
adb connect 192.168.0.10
replacing '10' with whatever IP your Nook is grabbing from your router.
Step 4) Full Root
at this point, you have root access via ADB only. You will not have root access in any apps like Root Explorer, Terminal, TiBackup, etc.
In order to finish PROPERLY rooting your Nook, you need to install 'su' to /system/bin/ and install the superuser.apk
Code:
adb connect 192.168.0.10
adb shell mount -o remount, rw /system
adb push su /system/bin/
adb shell chmod 6755 /system/bin/su
adb install superuser.apk
reboot your device one more time and then you will be fully rooted.
*** Note ***
this devices firmware seems to be a strange hybrid between donut and eclair, although it purports itself to be Android 2.1. The Superuser.apk and su binary came from an old Cyanogenmod 4.6 build in case anyone was wondering (Android Donut). The ones from Cyanogenmod 5 (Android Eclair) do not work. you will get the 'install failed older sdk' error.
installing busybox
I tired installing busybox by using the stericson busybox pro.apk. It would always freeze at 6.47%.
I figured out that if I grabbed an older version of the busybox binary and pushed it to /system/xbin manually and then chmodded it to the proper permissions, auto updates and proper symlinking work using the busybox app
Code:
adb shell mount -o remount, rw /system
adb shell mkdir -p /system/xbin
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk
Then reboot, and run the busybox app to update and create symlinks.
enjoy!
installing nano and bash
Code:
adb connect 192.168.0.10
adb shell
mount -o remount, rw /system
adb push nano /system/xbin/
chmod 6755 /system/xbin/nano
adb push bash /system/xbin/
chmod 6755 /system/xbin/bash
bash
mv /system/bin/sh /system/bin/sh.bak
ln -s /system/xbin/bash /system/bin/sh
chmod 6755 /system/bin/sh
adb push profile /system/etc/
adb push terminfo /system/etc/
and then in terminal emulator under 'Preferences' change the initial command to
Code:
export TERMINFO=/system/etc/terminfo;export TERM=linux;export HOME=/sdcard;
and finally
Code:
adb push bashrc /sdcard
adb shell
mv /sdcard/bashrc /sdcard/.bashrc
exit
nano works just fine via ADB, but because of lack of 'ctrl' key (and physical buttons to assign it to) you won't be able to write files (ctrl+o) using the terminal on your nook. But between having full proper root access, busybox, a proper bash terminal emulator and nano for editing config files, this should REALLY extend the usefulness of your Nook Glowlight. It should work just fine on other versions of Nook too.
Hi N00b-un-2,
Many thanks for your summary!
There is one important edit that I think you missed,
in init.rc you also need to:
Line #375, comment out "disabled" with a # at the start of the line.
(see http://forum.xda-developers.com/showthread.php?p=49070213#post49070213)
without this I couldn't get adb to connect.
And since you already made it very noob friendly, might I suggested you clarify:
Line #215 remove # to enable adb over wifi
(rather than search for 5555)
Also, I'm not expert, but I believe the commands to get superuser on the device are (at least it worked for me):
adb connect 192.168.x.x
adb shell mount -o remount, rw /system
adb push su /system/bin/
adb shell chmod 6755 /system/bin/su
adb install superuser.apk
Finally, I'm not sure if this is important, but maybe remount system as read only again:
adb shell mount -o remount, ro /system
Thanks again, nice work!
---------- Post added at 01:48 PM ---------- Previous post was at 01:10 PM ----------
Hi again,
had similar issues with installing busybox, here's what worked for me (note needed to run su to create dir):
adb shell mount -o remount, rw /system
adb shell /system/bin/su
adb shell mkdir -p /system/xbin
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk
cheers.
As far as remounting /system as ro, I would HIGHLY recommend just rebooting at this point, otherwise your nook might be stuck in a weird pseudo-rooted state. Probably won't cause any problems, but why risk it?
Thanks for clarifying the line number. I will make the appropriate edits to my instructions. I was working off the top of my head and couldn't remember what exact line the ADB over TCP config was, as I just used ctrl+w '5555' to find it myself.
There are several pre-edited uRamdisk images floating around the forum with various features enabled which would be easier for noobs than extracting the config files and manually editing and then repacking them. In the future I'll probably throw those on here as well.
darz said:
Hi N00b-un-2,
Many thanks for your summary!
There is one important edit that I think you missed,
in init.rc you also need to:
Line #375, comment out "disabled" with a # at the start of the line.
(see http://forum.xda-developers.com/showthread.php?p=49070213#post49070213)
without this I couldn't get adb to connect.
And since you already made it very noob friendly, might I suggested you clarify:
Line #215 remove # to enable adb over wifi
(rather than search for 5555)
Also, I'm not expert, but I believe the commands to get superuser on the device are (at least it worked for me):
adb connect 192.168.x.x
adb shell mount -o remount, rw /system
adb push su /system/bin/
adb shell chmod 6755 /system/bin/su
adb install superuser.apk
Finally, I'm not sure if this is important, but maybe remount system as read only again:
adb shell mount -o remount, ro /system
Thanks again, nice work!
---------- Post added at 01:48 PM ---------- Previous post was at 01:10 PM ----------
Hi again,
had similar issues with installing busybox, here's what worked for me (note needed to run su to create dir):
adb shell mount -o remount, rw /system
adb shell /system/bin/su
adb shell mkdir -p /system/xbin
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk
cheers.
Click to expand...
Click to collapse
N00b-un-2 said:
There are several pre-edited uRamdisk images floating around the forum with various features enabled which would be easier for noobs than extracting the config files and manually editing and then repacking them. In the future I'll probably throw those on here as well.
Click to expand...
Click to collapse
Would have been good if I could have easily found a pre-edited image, but your instructions were a great alternative, thanks again
darz said:
Would have been good if I could have easily found a pre-edited image, but your instructions were a great alternative, thanks again
Click to expand...
Click to collapse
Sorry for the really noob question, I have rooted, wifi adb running and installed apps as per your instructions, but I can't seem to access any of it on the nook. How can I get access to the launcher I installed?
You mentioned pre-edited images, do any of those come with the apps I need to get access to a custom launcher?
Cheers,
Dariusz
==============
Updated: All sorted
==============
For some reason had some issues with ADW launcher, Launcher pro worked fine.
ps I think I made a mistake with the su step I suggested, if you run a one line shell command I don't think it keeps su privileges, so I believe you need to run commands within the shell as per below:
adb shell
mount -o remount, rw /system
/system/bin/su
mkdir -p /system/xbin
exit
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk
Noob
Hey guys any instructions noob friendly or a video in youtube,i stick up at dab connect 192.168.0.10.I dos't have a Windows PC and using Mac whit Parallels Desktop.Is it possible instructions for Mac?
The above instructions from N00b-un-2 should work fine running a vm with parallels on your Mac.
OB
Sent from my SPH-D710VMUB using Tapatalk 2
valentin1985 said:
Hey guys any instructions noob friendly or a video in youtube,i stick up at dab connect 192.168.0.10.I dos't have a Windows PC and using Mac whit Parallels Desktop.Is it possible instructions for Mac?
Click to expand...
Click to collapse
Before you perform the adb connect step you need to find out what your IP address is:
On your nook, click on the settings icon in the top right corner and then select "Change"
Under Wireless Networks, select the wifi name that you are already connected to (where it says "Connected to the internet")
This will display your connection details, remember that IP address
Now go back to your pc and type:
adb connect [IP address]
darz said:
Before you perform the adb connect step you need to find out what your IP address is:
On your nook, click on the settings icon in the top right corner and then select "Change"
Under Wireless Networks, select the wifi name that you are already connected to (where it says "Connected to the internet")
This will display your connection details, remember that IP address
Now go back to your pc and type:
adb connect [IP address]
Click to expand...
Click to collapse
BIG HINT! If you're using Powershell ISE, you have to type .\adb.exe connect [IP address] or else it won't recognize "adb" as an executable!
Don't ask why, because I don't know. :?
thenookieforlife3 said:
BIG HINT! If you're using Powershell ISE, you have to type .\adb.exe connect [IP address] or else it won't recognize "adb" as an executable!
Don't ask why, because I don't know. :?
Click to expand...
Click to collapse
So far so good,but now what?
valentin1985 said:
So far so good,but now what?
Click to expand...
Click to collapse
I just gave a little tip on Powershell ISE. I do not know much about the Nook GlowLight rooting process, as I have a NSTG, not a NG. Ask someone else.
thenookieforlife3 said:
I just gave a little tip on Powershell ISE. I do not know much about the Nook GlowLight rooting process, as I have a NSTG, not a NG. Ask someone else.
Click to expand...
Click to collapse
Yes,i try whit dis command .\adb.exe connect 192.168.0.9 but result is the same.
valentin1985 said:
Yes,i try whit dis command .\adb.exe connect 192.168.0.9 but result is the same.
Click to expand...
Click to collapse
But that's okay! What I said was, if you are using the command program Powershell ISE, do it that way instead. But you are just using cmd.exe, not Powershell ISE!
In cmd.exe, which is what you are using, it is not neccessary to type .\adb.exe. Just type adb.
From there, ask someone else in this thread.
thenookieforlife3 said:
But that's okay! What I said was, if you are using the command program Powershell ISE, do it that way instead. But you are just using cmd.exe, not Powershell ISE!
In cmd.exe, which is what you are using, it is not neccessary to type .\adb.exe. Just type adb.
From there, ask someone else in this thread.
Click to expand...
Click to collapse
I prefer to use ConEmu or Console2 when I am forced to use Windows. Not a big fan of CMD.EXE or Powershell/PowershellISE. there are plenty of other CLI alternatives out there
N00b-un-2 said:
I prefer to use ConEmu or Console2 when I am forced to use Windows. Not a big fan of CMD.EXE or Powershell/PowershellISE. there are plenty of other CLI alternatives out there
Click to expand...
Click to collapse
Well, as I ONLY use Windows and Powershell ISE has a nice-enough layout for my purposes, I use it. That's why I gave a tip on it.
Actually on a lot of installs just typing adb in the command console won't work either unless it's got the path variable set up correctly, I find it easiest to just right click and choose run as administrator, no need for the path to be setup.
OB
Sent from my SPH-D710VMUB using Tapatalk 2
FW 1.2.1
Hi guys,
thanks for creating this thread. I was wondering if this rooting procedure was tested with the firmware 1.2.1 ?
real-6 said:
Hi guys,
thanks for creating this thread. I was wondering if this rooting procedure was tested with the firmware 1.2.1 ?
Click to expand...
Click to collapse
This rooting procedure is for the new Nook GlowLight with firmware 1.3.1. Your device is a Nook Simple Touch with GlowLight, which can be rooted very easily using the rooting package here.