Hi Guys, I have flashed to Vibrant 6 and have had nothing but problems with it. My phone freezes so many times I have to reboot. I downloaded Copilot from the market and I can't even get it to install. It freezes at the "choose language" screen everytime. I also miss the FM radio app that was with my original firmware.
I unfortunately wiped my backup of my original firmware from my phone when installing the new one. Does anybody happen to have the original Bell firmware?
Related
Ok so I've searched up and down and can find nothing so far. Here's amy Phone specs
Phone: Rooted G1
SPL: Danger SPL
Radio: 6250S.20.17U_2.22.19.26I
ROM: CyanomenMod 4.2.14.1
Ok now whenever i flash any rom on my phone whether it is super D, htcclay or cyanogen I get no service and just an x next to where my signal bars are. When I go into settings it under the baseband version it just shows unknown. The only way I can get things back is if I restore from nandroid backup of version 4.2.14.1 i had. Even if I try flashing version 4.2.14.1 fresh it does the same thing, no signal/service. Whenever flashing roms I always wipe multiple times before and that does not work. I try flashing the radio beforehand then flashing the rom that also does not work. I've followed numerous instructions to the letter in the development section for flashing roms but none seem to work. The roms ALL install perfectly but I just get NO SIGNAL after the install. Can anyone assist and tell me why this is please.
Also if I try to flash the new G1 radio 2_22_23_02 it doesn't flash at all. It will install when in the recovery mode and when I hit home+back to reboot it shows the htc logo for a quick second then disappears. When it restarts in recovery mode and I boot the phone up again it still has my original radio. Any assistance is appreciated. I've searched and can find nothing on my particular issue.
I'm having the same problem, except I got there a different way. I was rooted on JF 1.51 and decided to unroot. I flashed the original G1 bootloader and then loaded DREAIMG.img. I waited for the OTA update, and when it did, that's when I had the problem. I've tried manually updating to RC30, RC33, which work just fine, but as soon as I install anything higher than that, the problem starts. I do not know if the unknown baseband version symptom existed with any of these other attempts. Also, a force-close message for com.android.phone repeats endlessly. I tried to check the APN, but when I try to click on Settings -> Wireless -> Mobile networks, it won't open.
Phone: G1
Firmware: 1.6
Baseband version: UNKNOWN
Kernel version: 2.6.29-00479-g3c7df37; [email protected]#19
Build number: DMD64
One last thing: As I was trying things earlier, I started getting a "No SIM card" error so I went to T-Mobile today and got a new one. I don't know if these two things are related or not, but thought I would mention it.
have you try do update Radio??
Do you mean in addition to the OTA update? No. I loaded the DREAIMG file, and then updated with
1. signed-RC30-from-RC29-fat.1582cace.zip
2. signed-PLAT-RC33-from-RC30.zip
When the OTA comes, that's when the problem happens, but I have not tried to update anything after the OTA installs.
I thought that the issue might result from updating too much at one time (e.g., RC29 or RC33 all the way to Donut), but when I then try to update to Cupcake with signed-kila-ota-148830.de6a94ca.zip, then the phone gets stuck in an endless loop on the Android screen. No matter what I do, I can't upgrade above RC33.
I just had the same thing happen although my methods were different.
Basically there is no baseband which means (I think) there isn't
going to be any network activity.
My problem is much worse I'm afraid.
I swapped the Phone.apk from my system/app location,
grabbed another Phone.apk (assuming it was the dialer) because
I liked the theme...so I swapped, rebooted and bam, FC's every second
and then zero network activity.
So I had to use wifi, downloaded rom manager again, and root explorer
and had to reflash the base band...It is flashing right now, and I'm just waiting.
Clockword recovery was borked so I used Sprecovery.
SigmunDroid said:
I swapped the Phone.apk from my system/app location,
grabbed another Phone.apk (assuming it was the dialer) because
I liked the theme...so I swapped, rebooted and bam, FC's every second
and then zero network activity.
Click to expand...
Click to collapse
Phone.apk is the dialer, I swap mine out all the time. However, you have to make sure that it's compatible with your rom (i.e. similar framework, same build as yours, so if you have donut, only donut phone.apk will work)
Are you sure that you grabbed it from an actual rom and not from MM theme which has only drawables?
borodin1 said:
Phone.apk is the dialer, I swap mine out all the time. However, you have to make sure that it's compatible with your rom (i.e. similar framework, same build as yours, so if you have donut, only donut phone.apk will work)
Are you sure that you grabbed it from an actual rom and not from MM theme which has only drawables?
Click to expand...
Click to collapse
Hey man.
Yup, I'm sure, however when I did the search I didn't think it would
link me to a different forum since I'm running a Moto Droid 1
with BB v0.4 The dialer for that ROM is in contacts.
Anyway my phone technically died.
Was resurrected and now I'm running Liquid's Tangerine Frozen Yogurt 1.4
(which is the fastest/snappiest and most responsive ROM I've ever tried!)
It's also the 2nd ROM I've tried but still.
i had been flashing a bunch of roms and discoverd that i preferred the usa stock rom best, so i reflashed the stock rom and now the start button/home display wont. i cant use the btutton/the home display never appears..what do i have to do to fix/ does anybody know what's wrong?
Edit: actually i think i figured it out, it was the facebook tab cab i was attempting to install, after i installed that the home screen wouldn't work anymore. i hard resetted and tried again to install the cab but it happened again so im just going to delete it. but thanks anyways guys!
I bought a new HTC HD2 (there is TMobile written on the upper side in the front), so i guess, it's T Mobile USA?
In the time of purchase this phone had develped ROM, bet after some hours some issues appeared - system hanged, phone tried to restart, but stuck in the middle of restarting. I had to remove / reattach the battery to get my phone working, but soon it hanged again.
Then i installed Leo_RADIO_2.12.50.02_2 and Duttys_2.5_5.23144.5.3.10_3.14_HD2_ML_Family_ROM_( V6)_WWE from SD card. Unfortunately this doesn't solve the problem. So i installed original software (T-Mobile_HD2_MR_Software_3.14.531.1.exe), downloaded from t mobile web site, but the issues remains.
Now i don't know, how to solve the problem. So please help me somebody (i'd like to use developed ROM). I guess, i have to format phone with MTTY? And to install developed ROM, i need to reinstall BIOS?
viestursvi said:
I bought a new HTC HD2 (there is TMobile written on the upper side in the front), so i guess, it's T Mobile USA?
In the time of purchase this phone had develped ROM, bet after some hours some issues appeared - system hanged, phone tried to restart, but stuck in the middle of restarting. I had to remove / reattach the battery to get my phone working, but soon it hanged again.
Then i installed Leo_RADIO_2.12.50.02_2 and Duttys_2.5_5.23144.5.3.10_3.14_HD2_ML_Family_ROM_( V6)_WWE from SD card. Unfortunately this doesn't solve the problem. So i installed original software (T-Mobile_HD2_MR_Software_3.14.531.1.exe), downloaded from t mobile web site, but the issues remains.
Now i don't know, how to solve the problem. So please help me somebody (i'd like to use developed ROM). I guess, i have to format phone with MTTY? And to install developed ROM, i need to reinstall BIOS?
Click to expand...
Click to collapse
Run Task29 on your phone, and then download the stock 3.14 from T-Mobile and see if that works.
Hi.
In first case.. Sorry for my English
I have a little problem with the touchscreen on my Galaxy S.
I think it's something with firmware. Sometimes don't work about 20-30 pixels on the left and the right side.
It makes me mad, because i need move the widget from one screen to next one, and isn't working. So, i have to open SGS tools, and do TSP update (touchscreen firmwareversion). After update is Pass on the screen and everything works perfectly, BUT only for a moment (sometimes few hours, max one day).
Then i have to do everything again
Does anyone know what to do?
try to make a nandroid backup and then reflash your firmware or do an hard reset and see what happens
No, this isn't working.. I had a lot of different ROM and I did hard reset etc. (2.1, 2.2, 2.2.1)(JPU, JPY, JM1/2)
Now I have Darky ROM 7.7 and OCUV Kernel. I thing, somewhere in phone is correct firmware, because when I did update I don't have to turn on wifi or 3g. Update is working offline and then everything work..
I recently tried changing my theme, i rooted my phone, Downloaded ROM manager and Clockworkmod, when i installed it all, it bricked my phone- I unbricked it by updating the firmware with Odin, but now the touchscreen is not working - At Alll.
Help :\
Hey guys,
My situation is this, I bought a HD2 from ebay and it had no rom on it at all, So like everyone else here I flashed the stock rom and it worked perfectly except for one freeze up that I can remember.
Then I continued looking through the forums and found that Android could be flashed onto NAND so like everyone else I did it.
After about two days of use the phone started freezing and shutting down every time I went to play an app for more than five minutes.
The problems I have now -
I can't re install the HD2 stock rom (2.10) because it gets stuck at 8% and decides to give me a 204 error.
I tried re installing the HD2 stock rom (1.48) and that just leaves me frozen and hanging at startup
Now in a last ditch effort I've used task29 on my device and then install stock rom but I still get stuck at boot screen. So I then flashed this Version 6.5.3.1.4b custom rom
So currently my device is useless.
I really would like Android 2.2 running smoothly on my device again so any help is welcome.
Device information -
Hardspl: 2.08HSPL
Radio: 2.15.50.14
MAGLDR 1.13
Some pictures of my device.
Uploaded with ImageShack.us
Uploaded with ImageShack.us