Debian packages for heimdall-frontend from official Heimdall website fail under Debian GNU/Linux Squeeze with the following message:
Code:
heimdall-frontend: symbol lookup error: heimdall-frontend: undefined symbol: _ZN9QListData11detach_growEPii
When trying to detect the device. This is due to a missing symbol in Debian's qt4.
Here's how to rebuild the frontend using Heimdall source code:
0. Install what's needed to build qt code
Code:
$ sudo apt-get build-essential
$ sudo apt-get install qt4-qmake
$ sudo apt-get install libqt4-dev
1. Fetch heimdall sources from GitHub (sorry no link, not allowed to post them yet)
2. Uncompress the obtained source
Code:
tar zxvf Benjamin-Dobell-Heimdall-v1.3.1-0-gfbbed42.tar.gz
3. Build libpit
Code:
$ cd Benjamin-Dobell-Heimdall-fbbed42/libpit/
$ ./configure
$ make
4. Build heimdall-frontend
cd to ../heimdall-frontend/. You'll need to modify a qt4.7 incompatible function, in Source/Packaging.cpp, modify:
Code:
toMSecsSinceEpoch
to
Code:
toTime_t
And then type
Code:
make
You should now have a functionnal heimdall-frontend located in ../Linux.
And if you're too lazy to build it yourself, here's a i386 / Debian Squeeze version as an attachement
Enjoy.
a great job. Thank you very much.
I recompiled heimdall-frontend after changed value in Packaging.cpp and all works fine.
You are a very big linux programmer
Thanks...
Thanks for the post on the fix; however, following the instructions, I have a snag.
Downloaded the Heimdall 1.3.1 source (GithubDOTcom/Benjamin-Dobell/Heimdall/zipball/v1.3.1)
Uncompressed it
cd heimdall/Benjamin-Dobell-Heimdall-fbbed42/libpit
./configure
make (got a libpit-1.3.a) as root
cd ../../Benjamin-Dobell-Heimdall-fbbed42/heimdall-frontend
vi Source/Packaging.cpp
:%s/toMSecsSinceEpoch/toTime_t/g
:wq
pwd
/home/user/heimdall/Benjamin-Dobell-Heimdall-fbbed42/heimdall-frontend
But I see no configure or make files for the frontend. What have I missed?
Thanks again.
Very first command "sudo apt-get build-essential" Gives me the following error
E: Invalid operation build-essential
Now what?
Please help thanks
k got past that did the first step now im lost!!
"sudo apt-get install build-essential" and not "sudo apt-get build-essential"
Skelli said:
"sudo apt-get install build-essential" and not "sudo apt-get build-essential"
Click to expand...
Click to collapse
ok so now im stuck on #3. i instead used heimdall 1.1.1 and uncompressed that here i'll copy and paste what i have done so you can help me go from there. starting with the unpacking of heimdall 1.1.1
"$ tar zxvf Benjamin-Dobell-Heimdall-47faaf0.tar.gz
heimdall/
heimdall/source/
heimdall/m4/
heimdall/doc-pak/
heimdall/autom4te.cache/
heimdall-frontend/
heimdall-frontend/doc-pak/
heimdall-frontend/Source/
libusb-1.0/
libusb-1.0/msvc/
libusb-1.0/m4/
libusb-1.0/libusb/
libusb-1.0/examples/
libusb-1.0/doc/
libusb-1.0/autom4te.cache/
libusb-1.0/libusb/os/
Linux/
OSX/
OSX/heimdall.kext/
OSX/heimdall.kext/Contents/
Win32/
Win32/Drivers/
heimdall/postremove-pak
heimdall/postinstall-pak
heimdall/missing
heimdall/ltmain.sh
heimdall/install-sh
heimdall/heimdall.vcxproj.filters
heimdall/heimdall.vcxproj
heimdall/description-pak
heimdall/depcomp
heimdall/configure.ac
heimdall/configure
heimdall/config.sub
heimdall/config.h.in~
heimdall/config.h.in
heimdall/config.guess
heimdall/autogen.sh
heimdall/aclocal.m4
heimdall/Makefile.in
heimdall/Makefile.am
heimdall/LICENSE
heimdall/60-heimdall-galaxy-s.rules
heimdall/source/main.cpp
heimdall/source/SendFilePartResponse.h
heimdall/source/SendFilePartPacket.h
heimdall/source/ResponsePacket.h
heimdall/source/ReceiveFilePartPacket.h
heimdall/source/RebootDevicePacket.h
heimdall/source/PitFileResponse.h
heimdall/source/PitFilePacket.h
heimdall/source/Packet.h
heimdall/source/OutboundPacket.h
heimdall/source/InterfaceManager.h
heimdall/source/InterfaceManager.cpp
heimdall/source/InboundPacket.h
heimdall/source/Heimdall.h
heimdall/source/FlashPartPitFilePacket.h
heimdall/source/FlashPartFileTransferPacket.h
heimdall/source/FileTransferPacket.h
heimdall/source/EndPhoneFileTransferPacket.h
heimdall/source/EndModemFileTransferPacket.h
heimdall/source/EndFileTransferPacket.h
heimdall/source/DumpResponse.h
heimdall/source/DumpPartPitFilePacket.h
heimdall/source/DumpPartFileTransferPacket.h
heimdall/source/DeviceInfoResponse.h
heimdall/source/DeviceInfoPacket.h
heimdall/source/ControlPacket.h
heimdall/source/BridgeManager.h
heimdall/source/BridgeManager.cpp
heimdall/source/BeginDumpPacket.h
heimdall/m4/lt~obsolete.m4
heimdall/m4/ltversion.m4
heimdall/m4/ltsugar.m4
heimdall/m4/ltoptions.m4
heimdall/m4/libtool.m4
heimdall/doc-pak/README
heimdall/doc-pak/LICENSE
heimdall/autom4te.cache/traces.1
heimdall/autom4te.cache/traces.0
heimdall/autom4te.cache/requests
heimdall/autom4te.cache/output.1
heimdall/autom4te.cache/output.0
heimdall-frontend/mainwindow.ui
heimdall-frontend/mainwindow.qrc
heimdall-frontend/heimdall-frontend.vcxproj.filters
heimdall-frontend/heimdall-frontend.vcxproj
heimdall-frontend/heimdall-frontend.pro
heimdall-frontend/heimdall-frontend.pri
heimdall-frontend/description-pak
heimdall-frontend/aboutform.ui
heimdall-frontend/Qt4VSPropertySheet.props
heimdall-frontend/doc-pak/README
heimdall-frontend/doc-pak/LICENSE
heimdall-frontend/Source/mainwindow.h
heimdall-frontend/Source/mainwindow.cpp
heimdall-frontend/Source/main.cpp
heimdall-frontend/Source/aboutform.h
heimdall-frontend/Source/aboutform.cpp
libusb-1.0/missing
libusb-1.0/ltmain.sh.orig
libusb-1.0/ltmain.sh
libusb-1.0/libusb-1.0.pc.in
libusb-1.0/libtool-nls.diff
libusb-1.0/install-sh
libusb-1.0/depcomp
libusb-1.0/configure.ac
libusb-1.0/configure
libusb-1.0/config.sub
libusb-1.0/config.h.in
libusb-1.0/config.guess
libusb-1.0/compile
libusb-1.0/autogen.sh
libusb-1.0/aclocal.m4
libusb-1.0/_testing.test
libusb-1.0/_libusb_static_2010.vcxproj
libusb-1.0/_libusb_static_2008.vcxproj.filters
libusb-1.0/_libusb_static_2008.vcproj
libusb-1.0/_libusb_dll_2008.vcproj
libusb-1.0/_libusb_2008.sln
libusb-1.0/_bump.sh
libusb-1.0/_bm.sh
libusb-1.0/_bd.cmd
libusb-1.0/_README.txt
libusb-1.0/TODO
libusb-1.0/THANKS
libusb-1.0/README
libusb-1.0/PORTING
libusb-1.0/NEWS
libusb-1.0/Makefile.in
libusb-1.0/Makefile.am
libusb-1.0/INSTALL_WIN.txt
libusb-1.0/INSTALL
libusb-1.0/COPYING
libusb-1.0/AUTHORS
libusb-1.0/.gitattributes
libusb-1.0/msvc/xusb_sources
libusb-1.0/msvc/xusb.vcproj
libusb-1.0/msvc/xusb.dsp
libusb-1.0/msvc/stdint.h
libusb-1.0/msvc/lsusb_sources
libusb-1.0/msvc/lsusb.vcproj
libusb-1.0/msvc/lsusb.dsp
libusb-1.0/msvc/libusb_static.vcproj
libusb-1.0/msvc/libusb_static.dsp
libusb-1.0/msvc/libusb_sources
libusb-1.0/msvc/libusb_dll.vcproj
libusb-1.0/msvc/libusb_dll.dsp
libusb-1.0/msvc/libusb.sln
libusb-1.0/msvc/libusb.dsw
libusb-1.0/msvc/inttypes.h
libusb-1.0/msvc/ddk_build.cmd
libusb-1.0/msvc/config.h
libusb-1.0/m4/lt~obsolete.m4
libusb-1.0/m4/ltversion.m4
libusb-1.0/m4/ltsugar.m4
libusb-1.0/m4/ltoptions.m4
libusb-1.0/m4/libtool.m4
libusb-1.0/libusb/sync.c
libusb-1.0/libusb/libusbi.h
libusb-1.0/libusb/libusb_version.h.in
libusb-1.0/libusb/libusb_version.h
libusb-1.0/libusb/libusb.h
libusb-1.0/libusb/libusb-1.0.rc
libusb-1.0/libusb/libusb-1.0.def
libusb-1.0/libusb/io.c
libusb-1.0/libusb/descriptor.c
libusb-1.0/libusb/core.c
libusb-1.0/libusb/Makefile.in
libusb-1.0/libusb/Makefile.am
libusb-1.0/examples/xusb.c
libusb-1.0/examples/lsusb.c
libusb-1.0/examples/dpfp_threaded.c
libusb-1.0/examples/dpfp.c
libusb-1.0/examples/_xusb_2008.vcproj
libusb-1.0/examples/_lsusb_2008.vcproj
libusb-1.0/examples/Makefile.in
libusb-1.0/examples/Makefile.am
libusb-1.0/doc/doxygen.cfg.in
libusb-1.0/doc/Makefile.in
libusb-1.0/doc/Makefile.am
libusb-1.0/autom4te.cache/traces.1
libusb-1.0/autom4te.cache/traces.0
libusb-1.0/autom4te.cache/requests
libusb-1.0/autom4te.cache/output.1
libusb-1.0/autom4te.cache/output.0
libusb-1.0/libusb/os/windows_usb.h
libusb-1.0/libusb/os/windows_usb.c
libusb-1.0/libusb/os/threads_windows.h
libusb-1.0/libusb/os/threads_windows.c
libusb-1.0/libusb/os/threads_posix.h
libusb-1.0/libusb/os/poll_windows.h
libusb-1.0/libusb/os/poll_windows.c
libusb-1.0/libusb/os/poll_posix.h
libusb-1.0/libusb/os/linux_usbfs.h
libusb-1.0/libusb/os/linux_usbfs.c
libusb-1.0/libusb/os/darwin_usb.h
libusb-1.0/libusb/os/darwin_usb.c
Linux/README
OSX/install-kext.sh
OSX/README.txt
OSX/heimdall.kext/Contents/Info.plist
Win32/README.txt
Win32/Drivers/zadig.exe
msvc2010.sln
README
[email protected]:~$"
now what cd .. am i trying to get to to build libpit?
Here's the result of trying what I thought might work.
"[email protected]:~$ cd Benjamin-Dobell-Heimdall-47faaf0/libpit/
bash: cd: Benjamin-Dobell-Heimdall-47faaf0/libpit/: No such file or directory"
Thanks a lot for your help I really appreciate it.
Heimdall 1.1.1 doesn't have libpit, so you can safely skip that part. However, I see no valid reason why anyone would use Heimdall 1.1.1 over 1.3.1.
Benjamin Dobell said:
Heimdall 1.1.1 doesn't have libpit, so you can safely skip that part. However, I see no valid reason why anyone would use Heimdall 1.1.1 over 1.3.1.
Click to expand...
Click to collapse
You say i can skip that part but i still get the error. I think i'll take your advice and try the 1.3.1 and see if i have better luck with that.
edit- So do I still need to build front end? If so how exactly?
How have you managed with version 1.3? And have you tried the pre-compiled binary in the original post? If you are still having problems, I would suggest the terminal. If you tell us which files you want to flash , we can tell you what the terminal command is.
dabl8 said:
How have you managed with version 1.3? And have you tried the pre-compiled binary in the original post? If you are still having problems, I would suggest the terminal. If you tell us which files you want to flash , we can tell you what the terminal command is.
Click to expand...
Click to collapse
ok here is something that might make things easier, I just did a fresh install of xubuntu 10.04-2 and havent attempted to install heimdall on it yet I would ultimately like to install heimdall 1.1.1 (because im used to it) If I have to install 1.3 then so be it, but again would like 1.1.1. So if you can give me the commands for terminal to install heimdall suite 1.1.1 from scratch you will get a thanks for every post you put on here with commands. Thanks a lot for replying and I look forward to getting heimdall back on here.
THANKS!!!!
I could be wrong, but all of the Heimdall binaries hosted on github (including 1.1.1) require a newer version of libusb-1.0-0 (2:1.0.8) than is installed on ubuntu 10.04. I have built v1.1.1 deb for ubuntu 10.04 i386, libusb-1.0-0 (2:1.0.6) http://ubuntuone.com/0Su9yv2tCVJI3gNgophBOJ. Or you can install with this ppa http://ppa.launchpad.net/modycz/heimdall/ubuntu , but this will also upgrade your libusb.
So it goes something like this:
Code:
wget http://ubuntuone.com/0Su9yv2tCVJI3gNgophBOJ
wget https://github.com/downloads/Benjamin-Dobell/Heimdall/heimdall-frontend_1.1.1-1_i386.deb
mv 0Su9yv2tCVJI3gNgophBOJ.bin heimdall_1.1.1-1_i386.deb
sudo dpkg -i heimdall_1.1.1-1_i386.deb
sudo dpkg -i heimdall-frontend_1.1.1-1_i386.deb
Then run heimdall-frontend in the terminal. If that won't work download the binary from the original post and run that.
If that doesn't work you can always use heimdall just from the terminal:
Code:
heimdall flash --kernel zImage
, or whatever, with your device plugged in and in download mode. That was the way I installed a custom recovery on a galaxy s with Ubuntu 10.04. All the usual admonitions about flashing things to your phone apply here.
I edited the answer at http://askubuntu.com/questions/1379...ils-with-undefines-symbol-error/145458#145458 to make use of the launchpad ppa instead of my own build. You will need to install via the ppa if you are on 64-bit.
dabl8 said:
I could be wrong, but all of the Heimdall binaries hosted on github (including 1.1.1) require a newer version of libusb-1.0-0 (2:1.0.8) than is installed on ubuntu 10.04. I have built v1.1.1 deb for ubuntu 10.04 i386, libusb-1.0-0 (2:1.0.6) http://ubuntuone.com/0Su9yv2tCVJI3gNgophBOJ. Or you can install with this ppa http://ppa.launchpad.net/modycz/heimdall/ubuntu , but this will also upgrade your libusb.
So it goes something like this:
Code:
wget http://ubuntuone.com/0Su9yv2tCVJI3gNgophBOJ
wget https://github.com/downloads/Benjamin-Dobell/Heimdall/heimdall-frontend_1.1.1-1_i386.deb
sudo dpkg -i heimdall_1.1.1-1_i386.deb
sudo dpkg -i heimdall-frontend_1.1.1-1_i386.deb
Then run heimdall-frontend in the terminal. If that won't work download the binary from the original post and run that.
If that doesn't work you can always use heimdall just from the terminal:
Code:
heimdall flash --kernel zImage
, or whatever, with your device plugged in and in download mode. That was the way I installed a custom recovery on a galaxy s with Ubuntu 10.04. All the usual admonitions about flashing things to your phone apply here.
I edited the answer at http://askubuntu.com/questions/1379...ils-with-undefines-symbol-error/145458#145458 to make use of the launchpad ppa instead of my own build. You will need to install via the ppa if you are on 64-bit.
Click to expand...
Click to collapse
Thanks for trying but this is what i got out of both methods trying to no avail
Code:
[email protected]:~$ wget http://ubuntuone.com/0Su9yv2tCVJI3gNgophBOJ
--2012-06-02 08:17:12-- http://ubuntuone.com/0Su9yv2tCVJI3gNgophBOJ
Resolving ubuntuone.com... 91.189.89.205, 91.189.89.204
Connecting to ubuntuone.com|91.189.89.205|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 23856 (23K) [application/x-deb]
Saving to: `0Su9yv2tCVJI3gNgophBOJ'
100%[======================================>] 23,856 41.7K/s in 0.6s
2012-06-02 08:17:15 (41.7 KB/s) - `0Su9yv2tCVJI3gNgophBOJ' saved [23856/23856]
[email protected]:~$ wget https://github.com/downloads/Benjamin-Dobell/Heimdall/heimdall-frontend_1.1.1-1_i386.deb
--2012-06-02 08:18:01-- https://github.com/downloads/Benjamin-Dobell/Heimdall/heimdall-frontend_1.1.1-1_i386.deb
Resolving github.com... 207.97.227.239
Connecting to github.com|207.97.227.239|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: http://cloud.github.com/downloads/Benjamin-Dobell/Heimdall/heimdall-frontend_1.1.1-1_i386.deb [following]
--2012-06-02 08:18:04-- http://cloud.github.com/downloads/Benjamin-Dobell/Heimdall/heimdall-frontend_1.1.1-1_i386.deb
Resolving cloud.github.com... 216.137.41.109, 216.137.41.118, 216.137.41.136, ...
Connecting to cloud.github.com|216.137.41.109|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 34462 (34K) [application/x-deb]
Saving to: `heimdall-frontend_1.1.1-1_i386.deb'
100%[======================================>] 34,462 --.-K/s in 0.1s
2012-06-02 08:18:06 (256 KB/s) - `heimdall-frontend_1.1.1-1_i386.deb' saved [34462/34462]
[email protected]:~$ sudo dpkg -i heimdall_1.1.1-1_i386.deb
[sudo] password for chris:
dpkg: error processing heimdall_1.1.1-1_i386.deb (--install):
cannot access archive: No such file or directory
Errors were encountered while processing:
heimdall_1.1.1-1_i386.deb
[email protected]:~$ sudo add-apt-repository ppa:modycz/heimdall
Error reading https://launchpad.net/api/1.0/~modycz/+archive/heimdall: Couldn't resolve host 'launchpad.net'
[email protected]:~$ sudo add-apt-repository ppa:modycz/heimdall
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver keyserver.ubuntu.com --recv 1EC1E8C08499ECF7A5FE1743913B07AD8EC86B93
gpg: requesting key 8EC86B93 from hkp server keyserver.ubuntu.com
gpg: key 8EC86B93: public key "Launchpad PPA for Patrik Modesto" imported
gpg: Total number processed: 1
gpg: imported: 1 (RSA: 1)
[email protected]:~$ sudo apt-get update
Get:1 http://security.ubuntu.com lucid-security Release.gpg [198B]
Ign http://security.ubuntu.com/ubuntu/ lucid-security/main Translation-en_CA
Ign http://security.ubuntu.com/ubuntu/ lucid-security/restricted Translation-en_CA
Ign http://security.ubuntu.com/ubuntu/ lucid-security/universe Translation-en_CA
Ign http://security.ubuntu.com/ubuntu/ lucid-security/multiverse Translation-en_CA
Get:2 http://ppa.launchpad.net lucid Release.gpg [316B]
Ign http://ppa.launchpad.net/modycz/heimdall/ubuntu/ lucid/main Translation-en_CA
Get:3 http://security.ubuntu.com lucid-security Release [57.3kB]
Get:4 http://ca.archive.ubuntu.com lucid Release.gpg [189B]
Hit http://ca.archive.ubuntu.com/ubuntu/ lucid/main Translation-en_CA
Hit http://ca.archive.ubuntu.com/ubuntu/ lucid/restricted Translation-en_CA
Hit http://ca.archive.ubuntu.com/ubuntu/ lucid/universe Translation-en_CA
Ign http://ca.archive.ubuntu.com/ubuntu/ lucid/multiverse Translation-en_CA
Get:5 http://ca.archive.ubuntu.com lucid-updates Release.gpg [198B]
Ign http://ca.archive.ubuntu.com/ubuntu/ lucid-updates/main Translation-en_CA
Ign http://ca.archive.ubuntu.com/ubuntu/ lucid-updates/restricted Translation-en_CA
Ign http://ca.archive.ubuntu.com/ubuntu/ lucid-updates/universe Translation-en_CA
Ign http://ca.archive.ubuntu.com/ubuntu/ lucid-updates/multiverse Translation-en_CA
Get:6 http://ca.archive.ubuntu.com lucid Release [57.2kB]
Get:7 http://ppa.launchpad.net lucid Release [13.9kB]
Get:8 http://security.ubuntu.com lucid-security/main Packages [414kB]
Get:9 http://ca.archive.ubuntu.com lucid-updates Release [57.3kB]
Get:10 http://ca.archive.ubuntu.com lucid/main Packages [1,386kB]
Get:11 http://ppa.launchpad.net lucid/main Packages [932B]
Get:12 http://security.ubuntu.com lucid-security/restricted Packages [2,855B]
Get:13 http://security.ubuntu.com lucid-security/main Sources [123kB]
Get:14 http://ca.archive.ubuntu.com lucid/restricted Packages [6,208B]
Get:15 http://ca.archive.ubuntu.com lucid/main Sources [659kB]
Get:16 http://security.ubuntu.com lucid-security/restricted Sources [1,259B]
Get:17 http://security.ubuntu.com lucid-security/universe Packages [130kB]
Get:18 http://security.ubuntu.com lucid-security/universe Sources [40.5kB]
Get:19 http://security.ubuntu.com lucid-security/multiverse Packages [5,368B]
Get:20 http://security.ubuntu.com lucid-security/multiverse Sources [2,323B]
Get:21 http://ca.archive.ubuntu.com lucid/restricted Sources [3,775B]
Get:22 http://ca.archive.ubuntu.com lucid/universe Packages [5,448kB]
Get:23 http://ca.archive.ubuntu.com lucid/universe Sources [3,165kB]
Get:24 http://ca.archive.ubuntu.com lucid/multiverse Packages [180kB]
Get:25 http://ca.archive.ubuntu.com lucid/multiverse Sources [119kB]
Get:26 http://ca.archive.ubuntu.com lucid-updates/main Packages [613kB]
Get:27 http://ca.archive.ubuntu.com lucid-updates/restricted Packages [4,617B]
Get:28 http://ca.archive.ubuntu.com lucid-updates/main Sources [221kB]
Get:29 http://ca.archive.ubuntu.com lucid-updates/restricted Sources [2,194B]
Get:30 http://ca.archive.ubuntu.com lucid-updates/universe Packages [270kB]
Get:31 http://ca.archive.ubuntu.com lucid-updates/universe Sources [99.9kB]
Get:32 http://ca.archive.ubuntu.com lucid-updates/multiverse Packages [11.3kB]
Get:33 http://ca.archive.ubuntu.com lucid-updates/multiverse Sources [5,537B]
Fetched 13.1MB in 1min 8s (193kB/s)
Reading package lists... Done
[email protected]:~$ wget https://github.com/downloads/Benjamin-Dobell/Heimdall/heimdall-frontend_1.1.1-1_i386.deb
--2012-06-02 08:24:21-- https://github.com/downloads/Benjamin-Dobell/Heimdall/heimdall-frontend_1.1.1-1_i386.deb
Resolving github.com... 207.97.227.239
Connecting to github.com|207.97.227.239|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: http://cloud.github.com/downloads/Benjamin-Dobell/Heimdall/heimdall-frontend_1.1.1-1_i386.deb [following]
--2012-06-02 08:24:31-- http://cloud.github.com/downloads/Benjamin-Dobell/Heimdall/heimdall-frontend_1.1.1-1_i386.deb
Resolving cloud.github.com... failed: Name or service not known.
wget: unable to resolve host address `cloud.github.com'
[email protected]:~$ wget https://github.com/downloads/Benjamin-Dobell/Heimdall/heimdall-frontend_1.1.1-1_i386.deb
--2012-06-02 08:25:08-- https://github.com/downloads/Benjamin-Dobell/Heimdall/heimdall-frontend_1.1.1-1_i386.deb
Resolving github.com... 207.97.227.239
Connecting to github.com|207.97.227.239|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: http://cloud.github.com/downloads/Benjamin-Dobell/Heimdall/heimdall-frontend_1.1.1-1_i386.deb [following]
--2012-06-02 08:25:09-- http://cloud.github.com/downloads/Benjamin-Dobell/Heimdall/heimdall-frontend_1.1.1-1_i386.deb
Resolving cloud.github.com... 216.137.41.6, 216.137.41.19, 216.137.41.45, ...
Connecting to cloud.github.com|216.137.41.6|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 34462 (34K) [application/x-deb]
Saving to: `heimdall-frontend_1.1.1-1_i386.deb.1'
100%[======================================>] 34,462 --.-K/s in 0s
2012-06-02 08:25:09 (76.7 MB/s) - `heimdall-frontend_1.1.1-1_i386.deb.1' saved [34462/34462]
[email protected]:~$ sudo apt-get install heimdall
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libusb-1.0-0
The following NEW packages will be installed:
heimdall
The following packages will be upgraded:
libusb-1.0-0
1 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 56.4kB of archives.
After this operation, 123kB of additional disk space will be used.
Do you want to continue [Y/n]? Y
Get:1 http://ppa.launchpad.net/modycz/heimdall/ubuntu/ lucid/main libusb-1.0-0 2:1.0.8-2~lucid1 [31.7kB]
Get:2 http://ppa.launchpad.net/modycz/heimdall/ubuntu/ lucid/main heimdall 1.1.1-1~lucid2 [24.7kB]
Fetched 56.4kB in 1s (33.4kB/s)
(Reading database ... 114984 files and directories currently installed.)
Preparing to replace libusb-1.0-0 2:1.0.6-1 (using .../libusb-1.0-0_2%3a1.0.8-2~lucid1_i386.deb) ...
Unpacking replacement libusb-1.0-0 ...
Selecting previously deselected package heimdall.
Unpacking heimdall (from .../heimdall_1.1.1-1~lucid2_i386.deb) ...
Setting up libusb-1.0-0 (2:1.0.8-2~lucid1) ...
Setting up heimdall (1.1.1-1~lucid2) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
[email protected]:~$ sudo dpkg -i heimdall-frontend_1.1.1-1_i386.deb
Selecting previously deselected package heimdall-frontend.
(Reading database ... 114990 files and directories currently installed.)
Unpacking heimdall-frontend (from heimdall-frontend_1.1.1-1_i386.deb) ...
Setting up heimdall-frontend (1.1.1-1) ...
[email protected]:~$ heimdall-frontend
heimdall-frontend: symbol lookup error: heimdall-frontend: undefined symbol: _ZN9QListData11detach_growEPii
[email protected]:~$ heimdall flash --modem.bin
"-modem.bin" is not a valid argument
[email protected]:~$
My laptop is old its 32bit if you want any info off of it just let me know what to put in terminal and ill post the results.
Thanks again by the way
you can't write heimdall flash --modem.bin. heimdall help is what you need to run. you need to download the heimdall-frontend that the person posted in the first post if you want to use that
dabl8 said:
you can't write heimdall flash --modem.bin. heimdall help is what you need to run. you need to download the heimdall-frontend that the person posted in the first post if you want to use that
Click to expand...
Click to collapse
Thanks i'll try that now.
No luck with that either. lol i should be wearing a dunce cap!
heimdall flash --modem modem.bin
dabl8 said:
heimdall flash --modem modem.bin
Click to expand...
Click to collapse
Where does the modem.bin file and any other file i want to flash have to be? Good to be able to do it that way but would really love a front end to see it in. But for now I guess that will have to do.
Thanks again for your help.
the modem.bin file can be anywhere. if you have it in Downloads you would run heimdall flash --modem /home/bambam1978/Downloads/modem.bin
Hi!
I need help with root Acre Iconia tab a500... I use this guide for root on linux (ubuntu 12.10).
I follow all instructions. All is fine but I stucked on last step.
Here is my error (bold font) in terminal:
Thanks for help!
Code:
[email protected]:~/root$ chmod +x ./root.sh
[email protected]:~/root$ ./root.sh -d
ICS Root Linux V1.1 (Functionally Equivalent to Windows version 5.1)
Welcome to blackthund3r's Linux A500 Root Tool for the leaked releases of Ice Cream Sandwich 4.0.3
Supported leak ve rsions:
*0.019.00
*0.022.00
*1.031.00
~~~~~~~~~
WARNING: I TAKE NO RESPONSIBILITY FOR YOU OR YOUR EQUIPMENT WHILST USING THIS TOOL!
DEBUG MODE
FOR TESTING ADB CONNECTION. DOES NOT MODIFY THE TABLET
Press any key to continue...
[+] Killing any adb processes
[+] Starting adb server
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[+] Listing devices
List of devices attached
14902506315 device
Is your device listed? (y/n) y
[+] Your ADB connection is fine. Proceed to root your device!
[email protected]:~/root$ ./root.sh -h
ICS Root Linux V1.1 (Functionally Equivalent to Windows version 5.1)
Welcome to blackthund3r's Linux A500 Root Tool for the leaked releases of Ice Cream Sandwich 4.0.3
Supported leak ve rsions:
*0.019.00
*0.022.00
*1.031.00
~~~~~~~~~
WARNING: I TAKE NO RESPONSIBILITY FOR YOU OR YOUR EQUIPMENT WHILST USING THIS TOOL!
USAGE:
-h | --help: Shows this usage message
-r | --root: root the device (Installs busybox, su, Superuser.apk & remount app)
-t | --trebuchet: Install Trebuchet (CM9 launcher)
-f | --facelock: Install FaceLock (Experimental and only partially working at the moment
-a | --RemoveAcerNidus: Remove AcerNidus Crash Report App
-s | --RemoveStockRecoveryReflash: Remove auto-reflash of stock recovery in preparation to flash CWM in APX mode
-u1 | --AcerRing1: Install Acer Ring on 0.019.00
-u2 | --AcerRing2: Install Acer Ring on 0.022.00
-u3 | --AcerRing3: Install Acer Ring on 1.031.00
-b | --bash: Install bash on the tablet
-c | --complete: Does the whole lot!
-d | --debug: Debug mode. Tests the ADB connection
[email protected]:~/root$ ./root.sh -r
ICS Root Linux V1.1 (Functionally Equivalent to Windows version 5.1)
Welcome to blackthund3r's Linux A500 Root Tool for the leaked releases of Ice Cream Sandwich 4.0.3
Supported leak ve rsions:
*0.019.00
*0.022.00
*1.031.00
~~~~~~~~~
WARNING: I TAKE NO RESPONSIBILITY FOR YOU OR YOUR EQUIPMENT WHILST USING THIS TOOL!
Press any key to run!
Running in 5 seconds
5
4
Ready...
Set...
Go!
Running!!
[+] Killing all old adb processes
[+] Starting ADB Server
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[+] Listing Devices
List of devices attached
14902506315 device
Is your device listed? (y/n) y
[+] Uploading exploit
1088 KB/s (37273 bytes in 0.033s)
[+] Uploading busybox
1293 KB/s (821340 bytes in 0.620s)
[+] Setting permissions
[+] Creating directories
[+] Uploading files...
[B]./root.sh: řádek 161: [: ==: očekáván unární operátor
547 KB/s (22364 bytes in 0.039s)
1126 KB/s (843503 bytes in 0.731s)
0 KB/s (40 bytes in 0.040s)
537 KB/s (21584 bytes in 0.039s)
12 KB/s (519 bytes in 0.040s)
./root.sh: řádek 282: chyba syntaxe: nenadálý konec souboru[/B]
[email protected]:~/root$
I have recieved many messages about how to compile ROMs from compressed sources , here i present the guide
First Lets start with the download links
Download Thanks to @DigiGoon @vaibhavpandeyvpz @kD @MSF Jarvis and @regalstreak for their works
for more info u can see the link above to understand things better
Now After Downloading the sources what to do
*extarct it using terminal as said in the above link
after that the main thing , installation of main packages
1)Installing Java Development Kit (JDK)
For Kitkat
Installation of Java V6
Open The Terminal and Paste following Command
a) This will Remove the wrong Java JDK from Ubuntu 13.10
Code:
sudo apt-get purge openjdk-\* icedtea-\* icedtea6-\*
b) Enter the Following Command and This will Install JDK
Code:
wget https://launchpad.net/~webupd8team/+archive/ubuntu/java/+files/oracle-java6-installer_6u45-0%7Ewebupd8%7E8_all.deb sudo dpkg -i oracle-java6-installer_6u45-0~webupd8~8_all.deb wget https://launchpad.net/~webupd8team/+archive/ubuntu/java/+files/oracle-java6-set-default_6u45-0%7Ewebupd8%7E8_all.deb sudo dpkg -i oracle-java6-set-default_6u45-0~webupd8~8_all.deb
c)Check The Java Version Installed
Code:
java -version
For Lollipop/Marshmallow Required Java Version is 7 (java 8 not yet supported)
To Install Java V7
Code:
sudo apt-get update && sudo apt-get install openjdk-7-jdk
NOTE: For Ubuntu 16.04 user use this command
Code:
sudo add-apt-repository ppa:openjdk-r/ppa
sudo apt-get update
sudo apt-get install openjdk-7-jdk
*************JAVA INSTALLATION COMPLETES*****************
2)Installation Of Required Tools
Enter The Following Command
Code:
sudo apt-get install git-core gnupg ccache lzop flex bison gperf build-essential zip curl zlib1g-dev zlib1g-dev:i386 libc6-dev lib32ncurses5 lib32z1 lib32bz2-1.0 lib32ncurses5-dev x11proto-core-dev libx11-dev:i386 libreadline6-dev:i386 lib32z-dev libgl1-mesa-glx:i386 libgl1-mesa-dev g++-multilib mingw32 tofrodos python-markdown libxml2-utils xsltproc readline-common libreadline6-dev libreadline6 lib32readline-gplv2-dev libncurses5-dev lib32readline5 lib32readline6 libreadline-dev libreadline6-dev:i386 libreadline6:i386 bzip2 libbz2-dev libbz2-1.0 libghc-bzlib-dev lib32bz2-dev libsdl1.2-dev libesd0-dev squashfs-tools pngcrush schedtool libwxgtk2.8-dev python
NOTE:if u get broken dependencies error use following command and then above command
Code:
sudo apt-get update
sudo apt-get upgrade
**************All DONE*****************************
Now compiling and setting up files
after all the above
download all ur device related sources like device tree, kernel source, vendor files(if present)
Now where to keep those sources?
So, here i take cm13 and ASUS ZenFone 4 as example
The DEVICE TREE goes here:
cm13/device/asus/a400cg
Explaination:
asus is the company name u can know it from the .zip of the device tree u downloaded
*e.g.: android_device_asus_a400cg-master.zip
this says the directory and name of folders itself
device / asus / a400cg /
The Vendor Files Here:
cm13/vendor/asus/a400cg/
The Kernel Source (if not using prebuilt kernel) Here:
cm13/kernel/asus/a400cg/
***************SETTINGS FILES COMPLETE**************
Now Compiling:
open up terminal and cd to cm13 directory
Type :
. build/envsetup.sh or source build/envsetup.sh as ur choice
then
brunch a400cg
and finished wait for it to complete.
Holla u have compiled ROM from compressed source.
I have recieved many messages about how to compile ROMs from compressed sources , here i present the guide
First Lets start with the download links
Download Thanks to @DigiGoon @vaibhavpandeyvpz @kD @MSF Jarvis and @regalstreak for their works
for more info u can see the link above to understand things better
Now After Downloading the sources what to do
*extarct it using terminal as said in the above link
after that the main thing , installation of main packages
1)Installing Java Development Kit (JDK)
For Kitkat
Installation of Java V6
Open The Terminal and Paste following Command
a) This will Remove the wrong Java JDK from Ubuntu 13.10
Code:
sudo apt-get purge openjdk-\* icedtea-\* icedtea6-\*
b) Enter the Following Command and This will Install JDK
Code:
wget https://launchpad.net/~webupd8team/+archive/ubuntu/java/+files/oracle-java6-installer_6u45-0%7Ewebupd8%7E8_all.deb sudo dpkg -i oracle-java6-installer_6u45-0~webupd8~8_all.deb wget https://launchpad.net/~webupd8team/+archive/ubuntu/java/+files/oracle-java6-set-default_6u45-0%7Ewebupd8%7E8_all.deb sudo dpkg -i oracle-java6-set-default_6u45-0~webupd8~8_all.deb
c)Check The Java Version Installed
Code:
java -version
For Lollipop/Marshmallow Required Java Version is 7 (java 8 not yet supported)
To Install Java V7
Code:
sudo apt-get update && sudo apt-get install openjdk-7-jdk
NOTE: For Ubuntu 16.04 user use this command
Code:
sudo add-apt-repository ppa:openjdk-r/ppa
sudo apt-get update
sudo apt-get install openjdk-7-jdk
*************JAVA INSTALLATION COMPLETES*****************
2)Installation Of Required Tools
Enter The Following Command
Code:
sudo apt-get install git-core gnupg ccache lzop flex bison gperf build-essential zip curl zlib1g-dev libc6-dev lib32ncurses5 lib32z1 lib32ncurses5-dev x11proto-core-dev lib32z-dev libgl1-mesa-dev g++-multilib tofrodos python-markdown libxml2-utils xsltproc readline-common libreadline6 libncurses5-dev lib32readline6 libreadline-dev bzip2 libbz2-dev libbz2-1.0 libghc-bzlib-dev libsdl1.2-dev libesd0-dev squashfs-tools pngcrush schedtool python
NOTE:if u get broken dependencies error use following command and then above command
Code:
sudo apt-get update
sudo apt-get upgrade
**************All DONE*****************************
Now compiling and setting up files
after all the above
download all ur device related sources like device tree, kernel source, vendor files(if present)
Now where to keep those sources?
So, here i take cm13 and ASUS ZenFone 4 as example
The DEVICE TREE goes here:
cm13/device/asus/a400cg
Explaination:
asus is the company name u can know it from the .zip of the device tree u downloaded
*e.g.: android_device_asus_a400cg-master.zip
this says the directory and name of folders itself
device / asus / a400cg /
The Vendor Files Here:
cm13/vendor/asus/a400cg/
The Kernel Source (if not using prebuilt kernel) Here:
cm13/kernel/asus/a400cg/
***************SETTINGS FILES COMPLETE**************
Now Compiling:
open up terminal and cd to cm13 directory
Type :
. build/envsetup.sh or source build/envsetup.sh as ur choice
then
brunch a400cg
and finished wait for it to complete.
Holla u have compiled ROM from compressed source.
Just Incase
I have recieved many messages about how to compile ROMs from compressed sources , here i present the guide
First Lets start with the download links
Download Thanks to @DigiGoon @vaibhavpandeyvpz @kD @MSF Jarvis and @regalstreak for their works
for more info u can see the link above to understand things better
Now After Downloading the sources what to do
*extarct it using terminal as said in the above link
after that the main thing , installation of main packages
1)Installing Java Development Kit (JDK)
For Kitkat
Installation of Java V6
Open The Terminal and Paste following Command
a) This will Remove the wrong Java JDK from Ubuntu 13.10
Code:
sudo apt-get purge openjdk-\* icedtea-\* icedtea6-\*
b) Enter the Following Command and This will Install JDK
Code:
wget https://launchpad.net/~webupd8team/+archive/ubuntu/java/+files/oracle-java6-installer_6u45-0%7Ewebupd8%7E8_all.deb sudo dpkg -i oracle-java6-installer_6u45-0~webupd8~8_all.deb wget https://launchpad.net/~webupd8team/+archive/ubuntu/java/+files/oracle-java6-set-default_6u45-0%7Ewebupd8%7E8_all.deb sudo dpkg -i oracle-java6-set-default_6u45-0~webupd8~8_all.deb
c)Check The Java Version Installed
Code:
java -version
For Lollipop/Marshmallow Required Java Version is 7 (java 8 not yet supported)
To Install Java V7
Code:
sudo apt-get update && sudo apt-get install openjdk-7-jdk
NOTE: For Ubuntu 16.04 user use this command
Code:
sudo add-apt-repository ppa:openjdk-r/ppa
sudo apt-get update
sudo apt-get install openjdk-7-jdk
*************JAVA INSTALLATION COMPLETES*****************
2)Installation Of Required Tools
Enter The Following Command
Code:
sudo apt-get install git-core gnupg ccache lzop flex bison gperf build-essential zip curl zlib1g-dev zlib1g-dev:i386 libc6-dev lib32ncurses5 lib32z1 lib32bz2-1.0 lib32ncurses5-dev x11proto-core-dev libx11-dev:i386 libreadline6-dev:i386 lib32z-dev libgl1-mesa-glx:i386 libgl1-mesa-dev g++-multilib mingw32 tofrodos python-markdown libxml2-utils xsltproc readline-common libreadline6-dev libreadline6 lib32readline-gplv2-dev libncurses5-dev lib32readline5 lib32readline6 libreadline-dev libreadline6-dev:i386 libreadline6:i386 bzip2 libbz2-dev libbz2-1.0 libghc-bzlib-dev lib32bz2-dev libsdl1.2-dev libesd0-dev squashfs-tools pngcrush schedtool libwxgtk2.8-dev python
NOTE:if u get broken dependencies error use following command and then above command
Code:
sudo apt-get update
sudo apt-get upgrade
**************All DONE*****************************
Now compiling and setting up files
after all the above
download all ur device related sources like device tree, kernel source, vendor files(if present)
Now where to keep those sources?
So, here i take cm13 and ASUS ZenFone 4 as example
The DEVICE TREE goes here:
cm13/device/asus/a400cg
Explaination:
asus is the company name u can know it from the .zip of the device tree u downloaded
*e.g.: android_device_asus_a400cg-master.zip
this says the directory and name of folders itself
device / asus / a400cg /
The Vendor Files Here:
cm13/vendor/asus/a400cg/
The Kernel Source (if not using prebuilt kernel) Here:
cm13/kernel/asus/a400cg/
***************SETTINGS FILES COMPLETE**************
Now Compiling:
open up terminal and cd to cm13 directory
Type :
. build/envsetup.sh or source build/envsetup.sh as ur choice
then
brunch a400cg
and finished wait for it to complete.
Holla u have compiled ROM from compressed source.
In case