Hi.
I've been happily playing and customizing my TyTN and everything was going very smoothly until today. So, I was wondering if someone might know what the hell is going on.
Everything was working fine today in the morning. I have checked my voice mail as usual using the shortcut that gets automatically enabled in speed dial under number 1. Since then, I have installed Handmark Pocket Express, which also installed MS .NET CF 2.0 and then when I went to speed dial Voice Mail was no longer there. And I cannot create a shortcut for that number at all. It does not give me an option to use number 1. Soft Reset did not help. Installing a different SIM from my wife's phone did not help either. Before I start uninstalling and Hard Reseting, I was wondering if anyone else seen this issue before.
HTC TyTN
Latest SA ROM
SuperCID
Any help will be appreciated.
bumping this up
Hi,
Go to phone ==> speed dial ==> long tap on the number 1 (first top) ==> modify, then screen phone, select fifth line "voicemail and SMS" and tap display parameters ==> then, on the voicemail screen key into the voicemail box your number to call your voicemail. After going back to the speed dial screen your voicemail should be recorded.
BR.
Missing Voicemail Speeddial
I have a similar problem, but in my case not only is the speed dial for voicemail missing, but there's no number one on the speed dial screen. When I try to create a new speed dial, the numbers that are listed as either available or already assigned begin at 2. There's no "1" on the speed dial screen so I can't use your solution, and I've created a new speed dial for voicemail, but I've assigned it to 2. How can I make speed dial 1 visible?
Whipped up a program here that should allow you to automatically dial from your GV number. The only catch is, I don't have my account switched over yet, so I cant try it myself. You need to install 1 file, then use the program to apply the Google Voice settings. If this program works, please let me know, as well as let me know the optimal values for pause1 and pause2 (will have to experiment a little). To then dial via GV, right click (click-hold) the person in the contacts list and select Dial with Calling Card.
For Windows Mobile Pro, version 5.0 or later
.net 2.0 or greater required
-------
CAB File
[Link Removed]
------
Google Voice Dialer Settings Program:
[Link Removed]
-----
Install Instructions:
1. Install CAB
2. Apply Settings via GVD
3. Reboot
EDIT: It should be noted, pause 1 is the pause between the call and the auto-entering 2, pause 2 is the pause before entering the number. 0 will wait for the send key, and each number after that is aprx 2 seconds. So a 4 would be 8 seconds (4 *2).
techhead89 said:
Whipped up a program here that should allow you to automatically dial from your GV number.
Click to expand...
Click to collapse
What is it exactly?? voice dialing and google?
I just upgrade my Grandcentral today..I'll give this a try and report back....Do I juss need to install the cab or also grab the exe?
edit: just read directions directly below lol I shall report back soon..so glad they added sms
doesn't seem to be work? I install the cab apply the settings (add my number and 1 for each of the other fields) and soft reset. use file explorer to open calling card folder and click on only icon (CallingCard.dll) avail I get the message: There is no application associated with "CallingCard". Run the application first, then open this file from within the application. any help? Something missing in the cab? though I'm far from the expert here
using Raph 800 stock rom if that helps any
tgkdubb said:
doesn't seem to be work? I install the cab apply the settings (add my number and 1 for each of the other fields) and soft reset. use file explorer to open calling card folder and click on only icon (CallingCard.dll) avail I get the message: There is no application associated with "CallingCard". Run the application first, then open this file from within the application. any help? Something missing in the cab? though I'm far from the expert here
using Raph 800 stock rom if that helps any
Click to expand...
Click to collapse
To make calls you have to right click (click-hold) the person in your contacts menu. Think of this as an "extention" to your Contacts application.
S.V.I said:
What is it exactly?? voice dialing and google?
Click to expand...
Click to collapse
The idea is, to make a call with your Google Voice showing in the caller ID, you gotta call GV first, then call out. This allows quick and easy integration.
Another note: If you had a plan from a certain carrier that allowed unlimited calling to one number, theoretically this would enable unlimited anytime calling, anywhere. Just throwing that out there...
I love the concept, but I'm not sure about the implementation. I don't use the default poutlook contacts app, I run pocket informant. Will this add the calling card menu there?
Any chance of making the calling card dial the default option, so that all calls (including calls dialed using the keypad, rather than contacts app) would route this way?
ETA: Just confirmed, this does not work with pocket informant.
gai-jin said:
I love the concept, but I'm not sure about the implementation. I don't use the default poutlook contacts app, I run pocket informant. Will this add the calling card menu there?
Any chance of making the calling card dial the default option, so that all calls (including calls dialed using the keypad, rather than contacts app) would route this way?
ETA: Just confirmed, this does not work with pocket informant.
Click to expand...
Click to collapse
The reason for doing this is to mainly test and see if this approach will work with Google Voice (cant try it myself yet, waiting for feedback). The implementation currently is, like you said, less than optimal, but was the quickest and easiest I could get. I didn't want to wrap up a lot of time if this dosen't work. Can you check, and if it does let me know the minimal values that work for the pauses? I intend to leave this option out on the future versions.
techhead89 said:
The reason for doing this is to mainly test and see if this approach will work with Google Voice (cant try it myself yet, waiting for feedback). The implementation currently is, like you said, less than optimal, but was the quickest and easiest I could get. I didn't want to wrap up a lot of time if this dosen't work. Can you check, and if it does let me know the minimal values that work for the pauses? I intend to leave this option out on the future versions.
Click to expand...
Click to collapse
Sure, I'll just disable PI temporarily so I can use the default contacts app. Give me a few.
Ended up having to uninstall PI, I couldn't find the setting to change the shortcuts back to default with it still installed. Oh well.
Pause of 1 in both instances works fine, actually seems like it could be shorter, but of course 0 doesn't work that way.
You need to insert a # after the contact phone number is dialed. Right now it just sits there and I have to push # manually. (Or wait several seconds and then it goes through without the #)
The Touchtones when dialing the contact number are also probably a bit slower than necessary, but I'm not sure you can change that.
This program plus iDialer make a good combo for dialing out. GVD covers contact lists, and iDialer covers manual dialing.
oooohhh ok...so I just tried it and it calls sprint 411? - Scratch that had to input my number with the GVD tool again...
tgkdubb said:
oooohhh ok...so I just tried it and it calls sprint 411?
Click to expand...
Click to collapse
You put in your Google Voice number in the GVD tool?
When you try to make a call, what number shows up in the phone app as the number it's dialing?
gai-jin said:
You put in your Google Voice number in the GVD tool?
When you try to make a call, what number shows up in the phone app as the number it's dialing?
Click to expand...
Click to collapse
it's showing my GV number now...sometimes it calls like it's checking my messages....and sometimes I can hear it get all the way to the prompt where its asking for the number to dial...then once it attempts to autodial it says the number is invalid....I think I need to play with the pause settings. ok while typing this I've had success...my settings were 1 then 2
1 and 1 worked smoothly for me on several tries. I wonder why 1 and 2 would be needed on yours, the 2nd pause really should be the same across all phones/networks I would think.
Did you press pound manually after the touch tones for the phone number were done?
gai-jin said:
You need to insert a # after the contact phone number is dialed. Right now it just sits there and I have to push # manually. (Or wait several seconds and then it goes through without the #)
Click to expand...
Click to collapse
Second this. Can you modify the program to insert # at the end?
btw, It works pretty good on my TP with pause 1 & 1. Thank you.
outphase said:
This program plus iDialer make a good combo for dialing out. GVD covers contact lists, and iDialer covers manual dialing.
Click to expand...
Click to collapse
As far as I know iDialer doesn't work with google voice (atleast version 0.42).
What do you mean by manual dialing? Do you mean dial GV number + 2 + and actual number?
Ok guys, still working on adding in the #, as well as some other modifications. It's kinda hard working blind, but I hope to have something new here soon. Its also kinda hard doing this coding in VB, when I've never really studied it at all. Language similarity ftw.
techhead89 said:
Ok guys, still working on adding in the #, as well as some other modifications. It's kinda hard working blind, but I hope to have something new here soon. Its also kinda hard doing this coding in VB, when I've never really studied it at all. Language similarity ftw.
Click to expand...
Click to collapse
Thank you. Once you post new cab I'll test it.
I'm sure this will have been covered, but I've tried searching a few different terms with no luck
If I have a contact named 'Eddie' I want to be able to dial 3334 (eddi) and it show his name, I press and it dials.
It used to do this for me, I'm not sure what I did to make it stop. How do I turn such a feature back on?
Many thanks in advance.
Is dialer>menu>view and "Calls and contacts" selected? Some more info about your problem please?
Yes, it's selected. What other info do you need?
When you press for example 3334 what happens? Numbers appears of course but does Eddie appear at all? Or is your problem that the name appears but nothing happens when you are trying to select and call it?
Nope, just the numbers appear
Weird, I have stock HD and as well as I know that dialer "view calls and contacts" option is only way to make that happen or not. What if you put "eddie" in speed dial, Dialer>menu>speed dial>menu>new, does it work?
No, doesn't help.
I should have mentioned sorry, I'm on Davideuck V3 ROM.
One thing I notice, I type the name and it can guess the name as I press the keys, but just the name, no actual contact.
Maybe I'm just going mad, but after a full reset, I think I'm missing some functionality in the Dialer.
If I pull up the Dialer, and start using T9-like search, e.g. search for "John" by dialing 5646, then the drop down list will pull up all the Contact called "John" (or that match other letters on those keys), or have "5646" in their number. If you click the down arrow/count, then the list is popped up.
Each Contact has their "default" number listed (if the default is not explicitly set on the contact, I think it uses the first/only number defined).
If you wanted to use a number other than the default, I was pretty sure that you could tap the thumbnail image to show the alternative numbers, and select from there, but this isn't working for me. Tapping the area other than the image selects the default number, but tapping the image has no effect.
Does anybody know how to get the Dialer to show the list of alternative numbers? Is it a setting/permission that I'm missing?
Anybody else having this problem, or can think of a solution?
If there a multiple numbers then i see them all listed when i click on the contact and then i select the one number i want. It was always listing them all, don't recall changing a setting
Thanks for the response - that's how I remember it working, but I can't imagine what I've done to stop if functioning like that.
I have the same problem on N910C 6.0.1. Does anyone have the solution?
P.S. I disabled all keyboards except the SwiftKey, disabled voice input and S voice. And removed S find from the notification dropdown by cuting the "com.sec.feature.findo.xml": https://forum.xda-developers.com/note-4/general/root-how-to-remove-s-finder-quick-t3161432
I dont know if that broke the dialer search, but i returned that last file and it didnt help (S find was back).