Im having a big problem trying to install energy maxsense rom, i jsut successfully hardspl'd my phone and now i have tried both methods of installing the rom and through the computer it tells me the file can't be opened and when i go into bootloader with it on my sd card nothing is happening any ideas ?
jamizzal said:
Im having a big problem trying to install energy maxsense rom, i jsut successfully hardspl'd my phone and now i have tried both methods of installing the rom and through the computer it tells me the file can't be opened and when i go into bootloader with it on my sd card nothing is happening any ideas ?
Click to expand...
Click to collapse
yes, the stock 16gb card doesnt work for flashing roms. use a smaller card.
When you try on the PC, what do you mean by the file cant be opened? you arent clicking teh .nbh file are you? you need to put it in a folder with customruu.exe, so there are just the two files, then run customruu.exe (right click and run as administrator)
i ditched the 16 gb card from the rip since it was only class 2 im using a class 6 8 gb card and when i have just the two files in a folder on my desktop and run the ruu it tells me it cant open the nbh file ???? im at a loss i dont know what else to do ?
for sd card, make sure it is formatted fat32, they sometimes arent. Also, there have been some (not loads but some) reports of teh same problem with 8gb as with 16gb.
as for the PC flash, download it again.
I've noticed if it's a problem with the card being too big it will usually show "loading" for a split second after going into bootloader. At least for me (with the stock 16gb and another 8gb card)
Related
Hi i have flashed my HD2 from a sd card for more than 30 times but now I am unable to flash using my sd card.
I get into the boot loader mode with leoimg.nbh on sd card, but in the bootloader mode white colored loading screen appears for some fractions of a second and returns to tri color screen.
I was using Ozrom on the device last when i discovered this problem.
spl - 1.42.hspl
cotullahspl
Please help...
Sorry for my bad english.
Also I had already done alot of searching but could not find anything...
Update :
Now i cant flash from usb also. First I was able to flash from usb but now I cannot.
-Tried using a new sd card and formatted with fat32 file system. Problem still exists...
-Checked the file name and extensions its not "leoimg.nbh.nbh".
-Tried flashing just leoimg.nbh on card
-tried flashing with 5 different roms from different cooks
-tried renaming the file to capitals LEOIMG.nbh
-updated the hspl to hspl2 2.08
Problem is not solved.
There may be a problem with the sd card. Are you still using the same card you have used before? If so, try formatting the card (FAT32) or try a different sd card if you have one.
You can of course continue using usb, sd card flashing is only really needed in order to remove hspl.
Maybe is your card corrupted, try to format it in FAT32...
Tried using a new sd card and formatted with fat32 file system. Problem still exists...
Mate, you only need to flash from sd card when you cant flash from usb. I dont know why you are getting this error but dont worry too much. Did you name the file correctly (leoimg)? It's easy to make a mistake here. Some people rename the file to leoimg.nbh - you dont need to add the .nbh. It's already an nbh file - so you would end up with leoimg.nbh.nbh
Lastly dont flash a 2.10 rom via sd card or you will end up stuck with an spl that you cant change
i know about the file extensions and file names...i am flashing since 3 years from memory card....i am not a newbie..tell solutions other than the problems occured to noobs...like rename error..format memory card stuff...i want some solution other than that..
thanx alot for your support its really appreciated...looking forward for your help..hope now this time you can divert me in the right direction
also i have work of travelling so i have to flash my phone sometimes on the go
Regards
ankush1492 said:
also i have work of travelling so i have to flash my phone sometimes on the go
Click to expand...
Click to collapse
sorry but thats lol... shouldnt u be using phone on bussiness trip instead of messing with it?
i did not said that i have business trips..i travel a lot..so getting bored i start messing with it...LOL
can anyone help me in this???
Same problem
Guys, indicating same problem - SD reformated, still same situation. Tried also re-flash shipped ROM etc., but nothing helped. Doesn't work also on original SD (2 gigs).
does your "loading" screen in your bootloader comes and goes very fast???
ankush1492 said:
does your "loading" screen in your bootloader comes and goes very fast???
Click to expand...
Click to collapse
Try capital letters LEOIMG.nbh etc etc
try install 2.08.hspl, that also happened to me. fixed when i install 2.08.hspl from HSPL2.
tried capital letters LEOIMG.nbh also installed 2.08 hspl2. problem is not solved....
I have this problem as well.... I have hslp2 2.08 I TRY'de IT WITH 3 DIFF SD CARDS 4GB 8GB 16GB fat 32 AND NOTHING!!!!!!! ANYONE knows how to fix this????!?? I have NEVER been able to flash from sd I have a tmo usa hd2 maybe using task29 could fix it but it doesNT!!!
aby help PLEASE
Please xda. This problem may arise and annoy many users. so please help so that we can find some solution..
problem still exists can anyone help?
I always used to flash my diamond from internal storage when i had it. Got my HD2 and carried on flashing from SD for my first 2 or 3 ROMs and then it stopped working having the same thing as you. As if it tries to read the .nbh then goes back to the bootloader. I havent let it worry me as im nearly always next to a pc when im flashing a new ROM (have to be now), but I would be interested to find the answer as well.
but no one is really interested to reply here peovide a solution.....infact they are advising to flash from a pc...but i want to flash from a sd card
Just keep using USB, less lilkely to go wrong anyway
Hey guys, I've tried flashing a custom ROM onto my HTC HD2 and when ever I restart the phone and load the BOOTLOADER, it only ever flashes the word 'loading' and then goes back to the normal BOOTLOADER screen. I've read various tutorials which say that the loading screen is supposed to stay and then you just follow instructions. I've followed all the instructions but it still doesn't work.
The ROM doesn't have a default loader, its just a file that ends with '.nbh.' I've formatted an SD card, renamed the file to LEOIMG.nbh and placed it in the root folder of the SD card but it still doesn't work.
Key to us helping you is this:
What ROM are you trying to load?
What radio have you got installed?
WB
a common mistake is not properly renaming the file. because of the pc hiding file extensions lots of people end up accidentally renaming it
leoimg.nbh.nbh
also, what size card are you using? lots of problems discovered with cards bigger than 2gb.
but the main question..... why are you using sd card and not usb? usb is wayyyyyyyy faster and much fewer pitfalls.
samsamuel said:
but the main question..... why are you using sd card and not usb? usb is wayyyyyyyy faster and much fewer pitfalls.
Click to expand...
Click to collapse
Some people like me have to do it the SD card method because you cant run the .exe installer files on a mac
Halduck said:
Some people like me have to do it the SD card method because you cant run the .exe installer files on a mac
Click to expand...
Click to collapse
ahhh of course,a mac.
always forget about them.think it must be because I haven't seen one for best part of ten years, hehe.
I seem to remember reading of people successfully using a virtual xp to run flashes, its just hspl that doesn't like virtual boxes.( could be wrong of course )
Hi guys,
I've been trying out different android builds but after a while it won't boot in android anymore.
I run the CLRAD and HaReT, it show the command lines and then freezes on the HTC screen.
It is not the first time I'm launching it, everything is allways set up the way I like it and then I want to reboot a final time and it freezes. (first boot only takes 10 min.) Then I have to take out the battery to reset, but everytime after it freezes, tried waiting for +1 hour but no changes.
When I delete all the android files from my SD card and copy the original ones it restarts again and I have to setup everything again.
I tried new wm roms (Miri HD2 wm6.5.x) different radios (now 2.12.50.02.2),
the new HSPL3 but nothing seems to solve this.
edit: now I'm trying to use the mdeejay froyo HD v3.7 rom
I've searched the forum and other users seem to have the same problem, but no solutions have come forward. The people replying allways seem to think it is the first boot that takes 10 min. but it's not that. First boot works fine.
I would love to have a solution so I can start using android on a daily basis.
If you need more info, just ask.
I was having the same problem initially...very frustrating. Now i found the permanent solution for this problem. The problem on the second time or more on rebooting is depending how do you install the code in the root of SD card. Please follow the instruction carefully as each ROM (depending on which one you use) may require the files to store diffrently in the "root" of SD card. So read carefully after you unzip the code, where should you transfer the files in the SD card. Either under SD root or SD\Android (directory).Eg. I'm using FroyoStone_Sense V3.2 ; use 7-Zip File Manager program (can be download), then execute (click on the downloaded file : FroyoStone_Sense-V3.2.7z ) with the 7-Zip File Manager then you will get 2 directory 1. Android 2. Media and one readme.txt file. Copy the directory 1 and 2 in you root of your SD card. Then you run thru file manager, CLRCAD.exe follow by haret.exe . This the first setup. Let it run and setup your device. It will work and the second time you reboot, just run CLRCAD.exe and haret.exe as usual, your device will work perfectly..Good luck.
Hi, Just to add another note for you convenience if you are using different android build ef Mdeejay_Froyo_Sense_v.2.4.2_NextSense; when you extract the downloded file using 7-Zip File Manager, you will get 2 directories 1. AndroidApps and 2. Media with the rest of files including CLRCAD.exe and haret.exe .Copy and paste exactly the structure into your SD card. It will run beautifully and you will not have probelm on freesing on 2nd reboot even for the next reboot...hope it helps and try it out.thx.
I've the very same situation and Khairon i tried that method doesn't work...
Still same issue...
Any one can solve this?
cheers
Hi, use file using 7-Zip File Manager program to extract the downloaded zipfile. I've tried severals Android ROM builds and it works well on my HD2 after 2 weeks of trial and error on the freezing after the 2nd reboot. To increase your chance of success, reformat the SD card only then copy the files into the SD card.
Thx
all done, still same 2nd boot = freez
dont understand wots wrong
i am using the mjeedy's revolution build
is there any way to completely burn the android to HD2 like wince roms?
cheers
i was having exactly same problems as u, so i formatted my card with a card formatter, not through windows but used a card formatter, installed android agian and bingo it works, im using droidrom, radio 2.12, with the card format do full reset not quick this should work
full format is not working either
I also noticed that there is a file popping up on my SD card : EncFiltLog.menc
Searching around points to SD card encryption, but this is turned of in windows.
I checked with Miri, who made my windows rom and he said it's not set in the rom itself.
But this might explain everything, when I reboot the linux bootloader can't read the SD card because of the encryption.
Only thing now is to turn it off, but how can I do this when it is off in windows
I also had that file today on my "goldcard", the old 2GB SD-card shipped with my HD2. I tried the old card, because I can't start android (on 16GB sandisk) anymore.
Hi, I have the same problem.
Reboot freeze on 16GB Kingston.
Working fine on 2GB SD.
On both SD card is the same formating.
it doesn't seem to be related to the SD card i guess, I also tried my original 2GB card instead of my regular 16GB.
Both give me the same problems.
Hey anyone got a resolution to this??
my build works on my gb but not my 6gb card???
hi.
there is something wrong with my usb plug on my htc hd2, it charge fine but it cannot reconize storage on computer. i run android now and would like to flash it back to stock.
have formatet the sd card and download the stock htc rom http://www.htc.com/dk/help/htc-hd2/#download
and put it over on the sd card and renamed it leoimg.nbh.
but when i go to bootloader (volume down) the white loadnníng screen appears for ½ sec. and then the coulored screen appears again... what am i doing wrong
SPL-2.08. HSPL 8G XE
Try a different sd card.
No more than 4GB, 2GB is better.
Have used 2 differend 2gb card, did not work
fischerben said:
download the stock htc rom http://www.htc.com/dk/help/htc-hd2/#download
and put it over on the sd card and renamed it
Click to expand...
Click to collapse
You extracted first, right? You don't just rename the whole downloaded file, you extract ruu_signed.nbh from the rom and rename that.
yes exactly. I did a full format and then extract the diwnloaded file and renamed it to leoimg. And put it on the sd card
When you enter bootloader and it flashes grey just for a moment it usually means either a bad .nbh file, the flash of grey is bootloader finding tyw nbh and rejecting it for whatever reason. What did you format the card to? Needs to be fat32.
Okay, yes, i formatet to fat 32 and not a quick
I now have same problem as fischerben, when trying to update ROM from SD, grey flashes and disappears. Tried with 2 gb SD, formatted to fat32, tried with ROMs downloaded from different sites. Any other solutions of this problem?
EDIT: I tried with different ROM downloaded from official site(the only one without any O2 etc addons) and i get to "Loading..." but on SPL 3.03 i get "Not allowed" and on 2.08 i get stuck on "loading".
EDIT2: I made it. Tried with million different ROMs(both older and newer ones), until with one ROM i found PN limitation number. This one finally worked, with SPL 3.03 installed(i figured that its showing right message with "not allowed" and i should just search for the right ROM).
Cheers
Hi guys,
So recently my screen stopped working and I need to get it fixed. I want to revert the phone back to its stock ROM but I can't seem to do that. I downloaded the stock rom and followed this guide: http://www.youtube.com/watch?v=Wc89Gh0QpIY&feature=player_embedded
But, when I get into bootloader, in the white section of the screen it says Serial and it just stays unresponsive, it doesn't boot up like in the video. Any ideas on what's going on?
Did you rename the .nbh file to LEOIM.nbh? Also did you put thenfilenon the root(not in a folder) of your SD card? If you have done both of these then make a back up of you SD card and then reformat you SD card with a full format and not a quick format. Also the SD card method does not work well with larger SD cards so you may have to try a 2gig or 4gig SD card. Last you can use HSPL 4 to revert back to stock SPL just choose the SPL version from the drop down box when you run the installer, here is a hint the SPL's with four zeros at the end are stock SPL's.
Thanks for the reply
So, I tried reformating my 16 gb SD and still have the same problem. I then tried to do it with a 4 GB SD, same thing. So I tried it with HSPL but I can't sync the phone to my PC since it's in storage mode and with the touchscreen broken I can't adjust it to sync. I'm not taking the phone to a verified dealer so they probably won't care that it's flashed. The problem, from what I understand is that the digitizer is broken, so it shouldn't matter that the phone is flashed, right?
Thanks
You can connect it to the PC for flashing without Windows Mobile through the bootloader (3-colour screen). Just turn that on and connect it; Serial should change into USB and you are ready to flash.
About SD card method: Make sure the nbh file is named LEOIMG.nbh. The letters MUST be uppercase, else it might not work.
Spaqin said:
You can connect it to the PC for flashing without Windows Mobile through the bootloader (3-colour screen). Just turn that on and connect it; Serial should change into USB and you are ready to flash.
About SD card method: Make sure the nbh file is named LEOIMG.nbh. The letters MUST be uppercase, else it might not work.
Click to expand...
Click to collapse
Thanks a lot, that worked.