Related
Does anyone know how to cook own ROM? I've got Universal and there it's not so hard, mainly if U need only 2 add or remove several files (I'm not speaking about adding AKUs ....)
THX
btw. there must be a way (see pdamobiz) but i dont speak or read thai
For the trinity there is a HEX pack which unpacks the ROM, then you change the device id and country id and you rebuild the rom again. Anyone has additional info in this method?? Maybe is works for the Orbit/Artemis?
i found on buzzdev scooter's rom kitchen i'm gonna try that.
think we are in the right direction.
Scoter rom kitchen can extract the rom on an Orbit I believe...
this looks perfect: http://forum.xda-developers.com/showthread.php?p=1156254
Hi All
I see now we are getting quite a few custom ROM's from the likes of bepe, panosha and other.
Great Work Guys.
But i would also like to be able to build or a least edit a ROM to exactly meet my requirement. Like adding or removing certain CAB files and making reg edits.
Have been reading a lot of other threads on the site put none seem to deal directly with the Polaris.
So i was hoping some of you great cooks (grovel grovel grovel) would wight a description on how to take a nbh file and extract and edit the different nb parts and then rebuild back to a nbh file ready for flashing.
Thanks
polaris kitchen
sorry......wrong answer
I'd love that too! I want to mod an existing ROM and make it specific to my needs.
Will anyone be so kind and post a short guide how to do this? And make the topic sticky!
First, you can start with Kaiser's Kitchen...and at last, use Dark Simpson tool (htc room tool) to make nbh file (config add Polaris device in tool config)
Cheers,
ouioui
Good place to start is here http://wiki.xda-developers.com/index.php?pagename=Kaiser ROM Kitchen Tutorial
Yep , good one, but everything is based on Kaiser.
I don't have a Polaris Radio, neither does the HTC Rom Tool allow to cook Polaris Rom's.
Any other ideas ? Or could someone help ?
Thanks a lot in advance
The Kaiser kitchen works fine and all you need to do with the Dark Simpson ROM tool is change the Model ID from KAIS***** to POLA*****
As always read the threads before you start cooking and make sure you have Hard SPL!!
Thanks
I've been reading all night ;-)
In the HTC Rom tool there is no Polar***** , strange, although I thought I downloaded the newest ini. I've read in another thread that I could use the Kaiser one as it was basically the same device, is that so ?
Other question though:
Talking about Hard-SPL- I've Hard-SPL'd mine , but do I need to include that one in the rom as well ? Like while using the HTC Rom Tool , in the SPL section ???
Second question, where can I find the radio.....nb ?
Thanks for your help, I appreciate that.
As I said set the ROM tool to Kaiser then change the Model ID to POLA***** and use as normal to create the nbh image.
As for Hard SPL... once you´ve flashed it that´s that, no need to flash it every time you change ROMs or radio...
id love to see the guide for polaris aswell.
and oem packages as well.
i did everything as it was sowen in kaiser guide, but i got an error on building system. have no idea why..
was saying that something is missing or path is icorrect smth like that
post here exact errr.U got.
here is htcrt.ini for polaris (only Polaris Option is active) simply rewrite htcrt.ini in folder with htcrt.EXE
It's not necessary to include Radio ROM when building? Right?
nope, its up 2 U what 2 include (SPL/Radio/OS/Splash)
phsnake said:
post here exact errr.U got.
here is htcrt.ini for polaris (only Polaris Option is active) simply rewrite htcrt.ini in folder with htcrt.EXE
Click to expand...
Click to collapse
Thanks for the guidance. The tutorial is great but fails to mention specifics if you are not cooking a Kaiser Rom. For example, does the baserom have to come from a shipped Rom? I was using the 3.02 Kaiser Rom as my baserom. Can you do that when cooking a Polaris rom? How do I get the RUU_signed.nbh out of any other Rom. I thought about using the WM6.1 19716 Rom but couldn't extract anything. (Probably stupid questions but cant find answers in the wiki). BTW, I was getting same errors about half-way through compiling process. If I try again today, I will record the errors and post. Again, thx for help.
sgreenwood99M me i have 19716 WM6.1 for cooking. U can Use some part of any ROM but U have to be sure exactly what. In general U can Use OEMpackages freely, but be aware with drivers, baseapps....(i have perfect CZECH 19199 WM6.1 but w/o working SMS)
Hi,
i've read through the Kaiser kitchen guide and it all seems to make sense however i'm not sure how much is relavent to the Polaris, for example the ingredients section talks about expanding the radio file and the rom files to folders, from the Kaiser files on rapidshare etc.
Do us Polaris users do these points too? or are there specific Polaris Radio and ROM files we use?
I have my base ROM file called RUU_signed.nbh and i've also managed to use pdocread to get the RAW files too, but just not sure where to go now?
All i want to do is remove a few cabs and add a few cabs and EXEs to my rom.
can anyone post comments on exactly which parts of the Kaiser kitchen guide need to be changed to use on a Polaris?
thanks.
dont need raw's. simply put *.NBH(polaris) to BaseRom folder. Run begin.cmd(or bat?) Choose option 1.
click......... then start cook.cmd(or bat)
Do we replace the KaiserCustomRUU and the BuildOS files with ones specific to Polaris? Thanks.
yes, take udK CustomRUU & replace kaiser one, u dont need to replace anything else(except htcrt.ini ||KAIS**** replace with POLA***). And of course Polaris' *nbh
Whenever I put a Polaris nbh in the BaseRom folder, the process gives me an error that it cannot find RUU_signed.nbh.
hy all. i have a problem (wish): i want to install a clean rom ( i have it allready) and i want to customize it with the programs that i want to, and then, to save this rom (i supose that i have to dump it and reconstruct it) exactly with my settings/applications/etc. can i do that? if I can, how? thx alll.
When you customize your polaris on the device itself, it doesn't change the ROM on it. So dumping it will not give you a new ROM. You'll have to change the ROM on the desktop, and upload it afterwards. There are a lot of topics about ROM building.
ok. thx. i will go then to that topics. thx.
Yes but the problem is that all those posts are about porting a 6.1 rom from another device to polaris.
Now that we have a 6.1 rom how exactly do we cook it and flash it back?
Here's my problem: I have the PTG 6.1 rom, but I want to replace the CF2 with CF3.5 and replace TTN6 with TTN7, and flash it back.
I already have Kitchen 1.3, extracted the 'RUU_signed.nbh' and a dump of 03_OS.nb.payload.
Now, where do I go from here?. I want a rom that's exactly the same as the official one but with the changes I mentioned above.
I'm a complete noob at this cooking rom issue. I've read lots of threads but I've only gotten more confused about all the XIPs, SYSs, OEMs and stuff, and I think the same happens with other users.
I know that some of the actual cookers were once in the same place I'm now, so can someone point me out the rigth way and if possible post a detailed tutorial on how to extract, cook and flash back a rom on POLARIS, me and lots of users would apreciate it a LOT.
Second That Thought.
What would be nice to see (if possible) the following,
as an example:
1. Download Polaris ROM Kitchen v1.3
2. Extract to c:\Kitchen
3. Copy your ROM image (*.nbh) to X:\
4. Run command
...20. Install Package (M2D.cab) by doing the following ...
21. Recombine the ROM by doing the follow commands ...
22. Flash your ROM to your Polaris
23. Hard Reset and verify that the package you installed is in your ROM
Congrats
A step by step like that, which walks a user though the process of a demo ROM and a demo *.cab for learning would be FANTASTIC!!!
Thanks in advance to whoever can help us out!
Juxtyce
bump.
Any help from the professionals out there?
Look here:
1. .Net2.0 => .net3.5
http://forum.xda-developers.com/showpost.php?p=2685138&postcount=22
2. replace the ttn.cab file in the folder "\kitchen.work\Build\OEM\OEMAPPS" with the TomTom7 cab. If it don't have the same name, rename the new cab or edit the file 'config_AP.txt' in the same folder
hope it will help you I managed it this way.
P.S. I didn't change the XIP as mentioned in the given thread. See following posts
I will dump the wm6.1 rom for you guys, and provide you with a kitchen with some packages you can use.
I will do so for all available languages that is available with official wm6.1
But,that is gonna be quite time consuming, and I hope that you understand that I ask this in return:
Any small donation for the time I use on that will be of help.
I dont say that its required, not at all. I am not doing this for money.
But the number of hours I spend on this is getting pretty high.
I will do this project either you donate or not.
cheers
thank you a lot itje. can you make in romanian also?
dunno if it's the good topic to post but let's try.
I see many fantastic people cooking excellent roms (i wish i could do the same...), and, in those roms, a lot of softwares.
Isn't it possible to just have a rom with the bare minimum?
and seperate cabs to install what you want?
for example, manilla 2d is cool, but many people like spb mobile shell better, so it's wasted memory.
May be i'm just wrong, don't understanding how it all works, so plz explain to me !
ady_uaic said:
thank you a lot itje. can you make in romanian also?
Click to expand...
Click to collapse
if the language is available; yes
taniwha913 said:
Isn't it possible to just have a rom with the bare minimum?
Click to expand...
Click to collapse
There is a large choice of ROM's, some loaded with extra's, some very minimally equiped. There are so many that your favorite must be out there already. Just search for it.
Dear Pals,
Can anyone send me a link for wm 6.5 kernel, i want to build clean new rom for viva, on the latest core.
thx
I think you'r a newbie in rom cooking
If you want to developp a clean rom with the wm6.5 kernel, you need to download PlateformBuilder ( and not PlaterformRebuilder) and obtains the microsoft wm6.5 SDK with the kernel, and you need to have the htc viva BSP !
So, if you'are a goood and very good hacker, you can hack the htc engineer servers and still the Htc VIVA BSP in order to developp a new clean rom :=)
Good Luck
so man its not possilbe to have pure kernel of wm 6.5! then i should start on one of these in the forum. thx man
Nobody on this forum have already develop a rom with the " standart method", because even if oy have the kernel source, you need to program and compile it for the device specifications, and for this, you need the BSP.
The kernel is the NK file....
You can cook a rom, yes, but no develop it !
Aha, I dont need the source code, i want the system files man..
Ok!
I think you don't understand.
All the cooked rom have the Windows CE Kernel.
The NK.exe is located in the XIP.
But NK.exe is device specifique.
So, if you take a wm6.5 kernel ( the file nk.exe) builded for an XXXXX phone, you couldn't use it for another phone !
Understand ?
Kind help
Pls advise after extracting the rom, preparing the cabs i wanna add to the rom, someone pls guide me with the steps and tools.
thx..
Kind help
Pls advise after extracting the rom, preparing the cabs i wanna add to the rom, someone pls guide me with the steps and tools.
thx..
Hello!I`m a user of HTC S740 (ROSE) and i want to coock a new ROM for this device but need some help because I`m new in such stuff.So far I managed to extract the XIP and SYS from emulator image for WM6.5 provided by Microsoft,what I need now it`s to disassemble the ROM image of Excalibur ROM coocked by ookba and extract the additional tweaks and software that he used in his ROM but the problem is that I do know how..
After this I want to coock a new ROM using the SDK of the WM6.5.3 and add the extracted tweaks and software to the image but another problem is that ROSE uses bought portrait and landscape and the image is only portrait?How to add also the landscape to the image?So if its somewhere there that knows and could help me do this..I would quite appreciate this
None of you wants to help me?I hope i didn`t ask to much
I´m sure your project will have more audience if you place it here
Good luck,
Thanx man!So then if the Moderator could move the thread ther.. If not I will still wait for some answers
Ok so I see that none of you want`s to help me so I won`t do nothing..I think that the thread could be closed now!!!
Moved to Chef Central, good luck.