Hey,
Does anyone know if it is possible, through the supplied T-Mobile 2.26 ROM or third party software, to create custom contact fields? For example, say I want to have one contact called Papa John's Pizza and inside that contact have three fields named Anytown, Springfield, and NYC each with a number. As it stands now I have to either make a seperate contact for each location or have one contact and make each location say home, work, and work2. The latter choice makes it near impossible to remember which number goes to which office. I have many contacts that have multiple numbers that do not fit neatly into the supplied fields. On my old S60 phone this was quiet a simple task but I just can't seem to figure it out on WM5. Thanks for the help.
You can use IneSoft Address Book to add custom contact fields. The extra fields will be save as Note.
To mark a phone number you can put the text inside the phone number itself. E.g.
Work: +123456789 (Springfield)
or even
Work: Springfield +123456789
where "Work:" is the field name provide by Contacts application. You can use any character that can't be dialed (e.g. not a digit, * or #). Though some letters may cause problems, e.g. 'p' may mean 'pause'... I write my comments in Russian and therefore has no such problems
I use this solution for a long time. It is not specific to an OS or application.
And yes, IneSoft Address Book is good, not only for additional fields! This was the first application I purchased for my TyTN.
Lurker0 said:
To mark a phone number you can put the text inside the phone number itself. E.g.
Work: +123456789 (Springfield)
or even
Work: Springfield +123456789
where "Work:" is the field name provide by Contacts application. You can use any character that can't be dialed (e.g. not a digit, * or #). Though some letters may cause problems, e.g. 'p' may mean 'pause'... I write my comments in Russian and therefore has no such problems
I use this solution for a long time. It is not specific to an OS or application.
Click to expand...
Click to collapse
This would be really neat if Voice Commander 1.6 would recognize it, but it doesn't.
Do any of you know of or think that the iPhone style Voice-mail service will be coming to Windows Mobile devices soon? (At no additional cost )
Unfortunately I found the first feature the iPhone has that I currently see no alternative solution for.
Still, I would never get an iPhone but would love to have the ability to browse Voice-mails like TXT messages. Delete without listening to. Seems like something that should be available to all and is long overdue!
nothing free as of yet but here's the one if you willing to pay.
Code:
[url]http://www.viewyourvoicemail.com/?gclid=CLXJp5vLm48CFQh6gwodJUFoeQ[/url]
another pay service:
http://simulscribe.com/?gclid=CPeJndrMm48CFQqZggodMiuRfA
I didn't actually mean get Voicemails as TXT messages, I meant be able to browse through them rather than listen to one at a time and have to skip if you don't want to delete one and stuff like this iPhone ad.
http://www.youtube.com/watch?v=TcPv9PqnqfM
Just a list of voicemails and who left them with the ability to listen to any or delete them if I don't care what they have to say
Like described here in the commercial! http://www.youtube.com/watch?v=X-2PeyLz30E
yea I know what you're talking about. I havent seen an app like that yet but i'd like to see something like that come out soon for us.
I assume that it uses the data connection and/or possibly txt messaging. Otherwise I don't see how they can be doing this. Even with a txt msg list of voicemails, it would take longer than it does in the "demo" video to start playing if it had to dial out and play it on a voice line where as if it downloaded then through a data connection they are on the device ready to play.
That also means that AT&T will most likely charge for the feature if they ever decide to do it for WM Devices.
The iPhone integrates with a custom server in AT&T's network infrastructure that links into AT&T's voicemail servers. The custom server pushes a new voicemail down to the iPhone via the iPhone's data connection, and stores each voicemail on the phone itself as a compressed audio file.
Someone would need to write an application that could pretend it was an iPhone on AT&T's network, and attach itself to the iPhone voicemail push server. That same app could then store each file as it is transferred to the phone in memory and present the voicemails in a graphical interface.
ljinsane said:
another pay service:
http://simulscribe.com/?gclid=CPeJndrMm48CFQqZggodMiuRfA
Click to expand...
Click to collapse
While simulscribe is a pay service.... Simulsays is not. Yes there are two different things. I figured this one out on my own. So here ya go. Go to Simulsays.com and then setup an acct. Where it wants you to chose a package don't worry about it. The trick is to check no to having your voicemails transcribed. Once you set up your acct. you will download the program that works EXACTLY like Visual Voicemail on the iPhone. It is great. The way this one works is it instructs you to reroute your voicemail to the service and then the program that you then download pulls voicemails at a "set by you" time interval or just at will without auto polling. Hope you can figure it out. If you want to be sure you are not getting charged simply go to the link for support and get the phone number and say hey i want to make sure my acct is set up so that I won't get charged.
I am just not sure if every 'cool' service makes sense!
As the name says already: it is a VOICEMAIL! By seeing who left a message and being able to delete you will most likely often delete people who might have an important message! You won't know until you actually listen to it!
However, most likely you see on your phone who called anyway, so, you can asume that that was the person leaving a message. If you don't wanna listen to it then don't!
This reminds me somewhat of the new AUDI cell phone which has its own docking slot within the car and takes pictures of intruders. Those pictures then get forwarded to the AUDI CENTER. Audi really expects you to leave your phone in the car all the time ...
By seeing who left a message and being able to delete you will most likely often delete people who might have an important message! You won't know until you actually listen to it!
Click to expand...
Click to collapse
But what about being able to prioritise your voicemails -you can see a list of who has left you a voicemail, and just jump immediately to the one you want?
Someone would need to write an application that could pretend it was an iPhone on AT&T's network, and attach itself to the iPhone voicemail push server.
Click to expand...
Click to collapse
I am no programmer, so do not know if what follows is feasible or not, but, I can see no reason why you'd need to link to the iPhone's system at all- just use the WindowsMobile 6 system.
1.) When someone calls, this is logged
2.) When a voicemail is left, this is logged, but not against someone's number
3.) By combining the "missed call" log with the "voicemail" log, you should, in most cases, be able to identify who left the voicemail, I believe, or at least have a rough idea.
4.) The application needs to be able to list the voicemails left, and the link the call's number to their name: so you can see that Mr. X left you a voicemail at 10:00am.
5.) Provided that you always access voicemail via the application, and not directly, you could sort out the deleting too - most systems I've used have an IVR which lets you jump between messages, and delete them etc. So, for example, you tap on the third message in this application. The application dials your voicemail number, waits for a period, and then, using the IVR commands, moves to the relevant mail.
for example, something like, 121,,,,1,3,3,3 for the example above. (where "1" is the IVR code for "voicemail", and "121" is the shortcode)
If you deleted the voicemail yourself directly, then, that could cause a problem, as the application is not linked to the voicemail system, but, you could delete it via the application:
121,,,,,1,3,3,3,4 (where "4" is the IVR code for delete)
The application then removes the listing for that voicemail from the list. As such, the fourth voicemail becomes the third etc.
Neil_Brown said:
But what about being able to prioritise your voicemails -you can see a list of who has left you a voicemail, and just jump immediately to the one you want?
I am no programmer, so do not know if what follows is feasible or not, but, I can see no reason why you'd need to link to the iPhone's system at all- just use the WindowsMobile 6 system.
1.) When someone calls, this is logged
2.) When a voicemail is left, this is logged, but not against someone's number
3.) By combining the "missed call" log with the "voicemail" log, you should, in most cases, be able to identify who left the voicemail, I believe, or at least have a rough idea.
4.) The application needs to be able to list the voicemails left, and the link the call's number to their name: so you can see that Mr. X left you a voicemail at 10:00am.
5.) Provided that you always access voicemail via the application, and not directly, you could sort out the deleting too - most systems I've used have an IVR which lets you jump between messages, and delete them etc. So, for example, you tap on the third message in this application. The application dials your voicemail number, waits for a period, and then, using the IVR commands, moves to the relevant mail.
for example, something like, 121,,,,1,3,3,3 for the example above. (where "1" is the IVR code for "voicemail", and "121" is the shortcode)
If you deleted the voicemail yourself directly, then, that could cause a problem, as the application is not linked to the voicemail system, but, you could delete it via the application:
121,,,,,1,3,3,3,4 (where "4" is the IVR code for delete)
The application then removes the listing for that voicemail from the list. As such, the fourth voicemail becomes the third etc.
Click to expand...
Click to collapse
And all that only because of people get too lazy to press and hold "1", set your phone on speaker and listen while doing something else?
However, your plan still would require to communicate with the VOICEMAIL system. You want to delete something by pressing "4" - if you do not communicate with the VOICEMAIL system you can't delete but only the notification in your phone! As a programmer you should know better!
It would require an always-on connection to your voicemail to monitor what is going on there and also to transmit changes you make through the "menu" in your phone! And so on and so on and so on ...
However, your plan still would require to communicate with the VOICEMAIL system. You want to delete something by pressing "4" - if you do not communicate with the VOICEMAIL system you can't delete but only the notification in your phone! As a programmer you should know better!
It would require an always-on connection to your voicemail to monitor what is going on there and also to transmit changes you make through the "menu" in your phone! And so on and so on and so on ...
Click to expand...
Click to collapse
I'm sorry, but, can you please read through what I've written again? I can't see how you reach any of your conclusions, and, as you've written "[a]s a programmer you should know better", whilst I've clearly stated in the first line that I am not a programmer, I have doubts that you've understood it properly.
As long as the application can register a keypress in the Phone application, I cannot see why it would not work. It expressly does not require an always-on connection to voicemail, hence why the dial-strings I've included contain the voicemail dial number... The string dialled is the based on the options you select, combined with call-log details.
I agree that it is probably not worthwhile in terms of time-saving, but, hey, someone bothered starting this thread
Well, I missed the "no" in the beginning of your post - I appologize for that!
However,
a VOICEMAIL with functions mentioned in this thread would need a permanent or repeated connection to the voicemail itself.
A better thing would be to disable the NETWORK PROVIDERS voicemail service and have an application running on your phone just as SMARTPHONEWARE's BestAnswer for SYMBIAN PHONES. This has all the options and I used to love that app when I still had NOKIA. It records your voice messages directly on the phone's memory and not to a virtual MailBox in the network provider's computer.
Info here: http://www.smartphoneware.com/ansmachine-for-s60-product.php
Would be a challenge for WINDOWS MOBILE programmers to teleport it to WM devices ...
However,
a VOICEMAIL with functions mentioned in this thread would need a permanent or repeated connection to the voicemail itself.
Click to expand...
Click to collapse
Indeed- it would need to call voicemail each time, in my model. However, if someone really wanted a visual voicemail application, then, in the short term, it might work.
A better thing would be to disable the NETWORK PROVIDERS voicemail service and have an application running on your phone just as SMARTPHONEWARE's BestAnswer for SYMBIAN PHONES. This has all the options and I used to love that app when I still had NOKIA. It records your voice messages directly on the phone's memory and not to a virtual MailBox in the network provider's computer.
Info here: http://www.smartphoneware.com/ansmac...60-product.php
Would be a challenge for WINDOWS MOBILE programmers to teleport it to WM devices .
Click to expand...
Click to collapse
As I understand it, that would be a nightmare under WM?
thedogger said:
The iPhone integrates with a custom server in AT&T's network infrastructure that links into AT&T's voicemail servers. The custom server pushes a new voicemail down to the iPhone via the iPhone's data connection, and stores each voicemail on the phone itself as a compressed audio file.
Someone would need to write an application that could pretend it was an iPhone on AT&T's network, and attach itself to the iPhone voicemail push server. That same app could then store each file as it is transferred to the phone in memory and present the voicemails in a graphical interface.
Click to expand...
Click to collapse
lol i dont know who told you that but it's blatantly false...
The iPhone system works like every other system except that when a new voicemail message is received (by the server) a text message is sent to the iPhone (not the actual voice message. a text message) that is encoded with the time of the delivery, the caller's #, and various other information like how long the message is and such. A link is also included in the text message that is added to the Voicemail List on the iPhone. When you select to listen to a message from the list you're actually clicking on a link (basically a specific # to input once you're connected to the voicemail server).
Your method would require that every single voicemail message that is received by AT&T would be converted and sent to the receiving user (even if they don't use an iPhone) and then if the user was *not* using an iPhone the file would be denied. That would require huge amounts of converting and data transmission for no reason whatsoever. AT&T's out for money like every other company they're not going to waste time and effort developing a system like that when their simplified system works just fine.
Also, it appears that visual voicemail alerts are sent via SMS, and there's a special handler in the SMS app that passes them to phone alerts in the Phone app.
The SMS alert comes from the number 1000000000, its composition is below. Note that I've replaced the relevant mobile number with 8005551212:
smpp-vip.allntxacds12.attwireless.net:5400?f=0&v=300&m=8005551212&p=&t=8005551212:A:AMS_NB_VIP6:ms01::5065
If you attempt to reply in SMS to this number, you get an error message:
Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code.
the text message is the trigger for the voicemail
we know how it works now can we get it to work on wm6 and or 5
Short search with the help of Google bring me this solution - http://www.isecretary.net/
WM based voice mail.
Is this what you all wanted?
Judgementand said:
lol i dont know who told you that but it's blatantly false...
The iPhone system works like every other system except that when a new voicemail message is received (by the server) a text message is sent to the iPhone (not the actual voice message. a text message) that is encoded with the time of the delivery, the caller's #, and various other information like how long the message is and such. A link is also included in the text message that is added to the Voicemail List on the iPhone. When you select to listen to a message from the list you're actually clicking on a link (basically a specific # to input once you're connected to the voicemail server).
Click to expand...
Click to collapse
Wow...why would you say it's false? Do you have an iphone? I can listen to my voicemails when my iphone is in AIRPLANE mode (all raidos and calls disabled)...so either my iphone is lying about being in airplane mode and it's really calling AT&T servers...OR...it really does download the audio voicemail files to your phone.
GrandCentral is your answer ...
Go to GrandCentral.com and signup. You'll probably have to wait, as it is still in private Beta, but not more than a few weeks. Basically, you'll get a free phone number (choose one in your local area) and can route that number to a number of places and can access it in a number of different ways ... including the Internet.
It has voicemail that you can peruse, just like e-mail.
- Unlimited inbound minutes
- Unlimited voicemail
- Unlimited Credit for click-to-call
- All premium features, including call record
And the best part is that it is owned by Google, so it is FREE!!!! Woo hoo!!!!
I'm running 6.1 MR1 and sync my contacts with an Exchange Server.
I have a number of contacts that have the same office phone number, and I'm trying to figure out if there is some way to specify which contact info is displayed by Called ID when there is more than one person/entity with that phone number in my contacts.
For example, say I have individual contacts for the ABC Company, John Doe and Jane Smith. All three have the same work telephone number. When I get a call from that phone number, it could be John Doe, Jane Smith or anyone else at the ABC Company calling. Let's say that in this situation, my caller ID display always shows the incoming caller as John Doe. Is there any way to tell Windows to display the caller as the ABC Company information when it receives a call from this number instead.
I've embarrassed myself too many times thinking one person was calling when in fact it was someone else!!!
Thanks!
I've love to be able to do this too.
My problem is that I have a shared address book with all workers at my business with home as well as work numbers. My name and number are obviously in there. In a different book I have my wife's name and our home number. Whenever she calls, my name, as it's alphabetically before here, shows up first. I've tried putting a period or space before her first name hoping that it would move her up on the list, but it moves her down to the last spot of people with the same last name, and I can't change my name in the shared book.
If you're working off personal address books, I'd see if you can fudge the names so that the one you want to appear shows up alphabetically first. Then I think that's the one that gets grabbed with Caller ID
the other option. if you can edit your contacts. Would be to remove the work phone number from the individual contacts. That way it only shows for 'ABC' Company.
Thanks, Nec . . . I've removed the work numbers for the individuals as a half-baked work around. The problem is that some of them are favorite contacts (Spb Shell), so if I want to call them at work, I have to go through the directory instead of just using the picture shortcut.
Is there a way, other than adding *31# infront of the stored number, to enable caller ID per contact in my 'people' tab?
My number is blocked by default (and I'd like to keep it that way for a variety of reasons) but would like to enable the ID when calling my wife and select other people. The workaround so far has been to add the code above infront of the number but then it seems SMS messages are not going thru which is less than ideal (I could add a separate number entry for messages I guess, but still).
Having looked at the Phone settings it seems I'm able to select "Contacts only" which in my mind (as a dev) means someone has already written a app (or simply extended the current Contact app) to allow for this on a per-contact basis.
Any ideas?
You can try this MagiCall
http://www.mobiion.com/
I was also looking for this.
The MagiCall features don't mention the option to set caller id per contact.
@emigrating: Did you fix it another way?
Anyone else knows a good solution?
+1 same interrest same issue.
But as time goes on you can use the following workaround: or let's say this is the way I manage it......
If you use the traditional SMS Mode and hit reply sms goes through.
This doesn't work as mentioned in Konversation Mode.
It's uncomfortable because the konversation mode is the better client...but the only way you can send sms to someone stored as *31# contact.
It seems as if the konversation mode always refers to the number stored in your contact, whereas the traditional mode refers to the number which comes with the sms.
I hope someone can fix this, or has a better workaround, I'll be interested to!!!
SWINXNL said:
I was also looking for this.
The MagiCall features don't mention the option to set caller id per contact.
@emigrating: Did you fix it another way?
Anyone else knows a good solution?
Click to expand...
Click to collapse
use MagiCall. Set up a rule: for your wife's phone #, prepend *31#, then dial.
I use it for long distance calls. For all phone # not in my home area code, prepend 1511 (chaper long distance call provider), then dial. A small problem with this: need to disable this rule when roaming in another country.
Give it a try, it is good.
I've downloaded the trial version and set up a rule for Outlook categories, just to test. Change the dialed number to #31#{phone}. When I call someone in the particular category, the MagiCall icon appears in the topbar and my device freezes....
No big problem, I restarted my device to try again.
The same thing happens. Again I take out the battery and restart the phone.
At that point the device became terrible slow somehow.
With a little patience I succeeded uninstalling the app.
Restarting again.
Fortunately, my phome is normal speed again.
Sorry, I'm not a big fan of MagiCall at this moment...
----
Edit: Just trying again, because I can't find a real alternative.
The problem seems to occur when I choose Outlook Category as filter.
Just bad luck for me by choosing that option for my first try.
The program seems to respond on other conditions.
It could be my phone only, otherwise maybe I will contact Mobiion about this..
Edit2: The problem was known and was fixed in a newer version.
So it seems to work after all
hi Android Community,
i am just about to reorganize my phonebook, i have used different methods of saving numbers to my phonebook e.g. for germany 004996122222 for person xyz, 0049 stands for country code 961 stands for area code and 22222 stands for the landline, usually Android displays incoming calls like this area code "space" and landline number, it also displays the city where the area code belongs too e.g. waidhaus which is near my hometown.
i still have misc problems the way android formats these numbers. still no problems calling contacts, but one issue was when i type the phone number manually android only suggests me the phone number of one specific person i have in my phonebook either i type in this persons phone number or another persons phone number (manually!!) this is way of wrong.
it displays me this persons name either it is this persons number or any other. i have had this bug years ago with my first htc desire still preserving; it started when beginning saving phone numbers the lol way e.g. 004996122222 where it was not necessary to save it this way unless you are in holidays abroad
due to different formatting of phone numbers from persons around the globe because of the int code &the different way of handling of the leading zero according the country you call to i still have issues, i know there is a way you can edit phone nr in google contacts (gmail) so that it can be updated with next sync. but that did not helped me, still issues from what i have written above
is there a app available that removes this bug of only displaying this one persons contact either i type in his number or anyone else, i think it is because of googles data collection rage and/or my sold htc desirewhich may have had a bug in htc sense and the availability of updates for this device (now i have sgs3 and cm whatever version i dont know and have no issues atm)
or maybe it was because of my mistake setting the phone number the proper way, i think there is no wrong in setting the phone number the way +1NewYorkCityAreaCodeBureauofPersonXYZ but i did probably made a mistake in doing this way making it difficult to reorganize my phonebook.
the problem with this has nothing to do with outgoing calls as there are no problems when typing 004996122222 it always works well (destination germany either i am in germany or abroad), but when a incoming call comes from a saved contact i suggest that it would properly display the orign of the call (only as it is with landline numbers either it is within a country or abroad but no mobile numbers as there are limitations to this),
i wonder if anybody can tell me if there is a builtin library in Android that handles this task i would appreciate your answers to this topic even if i could have written a book on this topic,
wishing you can be indulgent too on my write rage even if it could be explained a smarter way, if you have questions feel free to ask.
thegrayrace said:
hi Android Community,
i am just about to reorganize my phonebook, i have used different methods of saving numbers to my phonebook e.g. for germany 004996122222 for person xyz, 0049 stands for country code 961 stands for area code and 22222 stands for the landline, usually Android displays incoming calls like this area code "space" and landline number, it also displays the city where the area code belongs too e.g. waidhaus which is near my hometown.
i still have misc problems the way android formats these numbers. still no problems calling contacts, but one issue was when i type the phone number manually android only suggests me the phone number of one specific person i have in my phonebook either i type in this persons phone number or another persons phone number (manually!!) this is way of wrong.
it displays me this persons name either it is this persons number or any other. i have had this bug years ago with my first htc desire still preserving; it started when beginning saving phone numbers the lol way e.g. 004996122222 where it was not necessary to save it this way unless you are in holidays abroad
due to different formatting of phone numbers from persons around the globe because of the int code &the different way of handling of the leading zero according the country you call to i still have issues, i know there is a way you can edit phone nr in google contacts (gmail) so that it can be updated with next sync. but that did not helped me, still issues from what i have written above
is there a app available that removes this bug of only displaying this one persons contact either i type in his number or anyone else, i think it is because of googles data collection rage and/or my sold htc desirewhich may have had a bug in htc sense and the availability of updates for this device (now i have sgs3 and cm whatever version i dont know and have no issues atm)
or maybe it was because of my mistake setting the phone number the proper way, i think there is no wrong in setting the phone number the way +1NewYorkCityAreaCodeBureauofPersonXYZ but i did probably made a mistake in doing this way making it difficult to reorganize my phonebook.
the problem with this has nothing to do with outgoing calls as there are no problems when typing 004996122222 it always works well (destination germany either i am in germany or abroad), but when a incoming call comes from a saved contact i suggest that it would properly display the orign of the call (only as it is with landline numbers either it is within a country or abroad but no mobile numbers as there are limitations to this),
i wonder if anybody can tell me if there is a builtin library in Android that handles this task i would appreciate your answers to this topic even if i could have written a book on this topic,
wishing you can be indulgent too on my write rage even if it could be explained a smarter way, if you have questions feel free to ask.
Click to expand...
Click to collapse
hi Android Community,
i googled around some keywords regarding my topic and found a way it could be solved
here it goes
contacts+formatter+android in google search box
i ll give it a try, many thanks even no answer
bye bye