right now i have a class 2 sd card with 500 mb and i wanted to upgrade to the 8gb class 6 card i just bought...
whats the best way to upgrade and keep all my info??
and is there a rom out that can do apps2d yet??
Copy and paste? No "info" is stored on the sdcard unless otherwise noted. There have been roms with apps2sd for a long time.
i meant does cm6 have aps2sd yet
yes it does.
Related
Ok so I have a mt3g rooted with the latest stable cyanogenmod (6.0 I believe). I currently have a 4gb card in it class 4. I do not use apps2sd, but I do use the install apps to sd feature. The whole sd card is formatted to fat32. I just ordered a 8gb card class 6 online to replace the 4gb I have now since it is becoming full. My question is, can I simply move the data (copy & paste) from the 4gb to the 8gb? Or is there something else I would have to do? Thanks.
I'm putting anew 16gb card into my nook to replace the 2gb that is currently in. What do I need to do to make sure everything works correctly? This nook running CM7 is only 2 days old so I really don't have installed yet.
If you plan to use the card for running CM7 or phiremod you need a sandisk class 2 or 4 card. If not, there are no card issues that I'm aware of. If you're asking about moving your apps I'd just reinstall. Titanium Backup is the preferred app for backing up and restoring apps if you want to try it. There are threads about moving CM7 card installs to larger cards. I think you just image the old card, put the image on the new card and expand the partition to fill the new card.
I found a Sandisk microsdhc 32GB class 4 on amazon for $59.
Would it work?
"Would it work?"
Dunno.
This thread is the clearinghouse for all info about which sd cards work for booting. There's not enough information about 32GB cards yet to know how it would work. That's a decent price though so it might be fun to get one and try.
So i have 2 sd-cards. One with Android(brandless 2 gb no class) one without Android(Adata 16 gb no class). I want to move Android from the sd-card with Android to the one without Android. WITHOUT LOSING ANY DATA.
just move all the files from the card with android to the one doesn't...
you won't lose data, becoz all your data is in data.ext2
I did that once but that didn't work. So....
backup what u dont wanna loose...
so what's the problem you are facing?
you should move ALL files from old sd card to new one in order to keep all the data
or maybe you sync the files(music/photos) with computers...
and then restore it to an clean install..
elias2204 said:
So i have 2 sd-cards. One with Android(brandless 2 gb no class) one without Android(Adata 16 gb no class). I want to move Android from the sd-card with Android to the one without Android. WITHOUT LOSING ANY DATA.
Click to expand...
Click to collapse
first make sure that the adata 16gb card is working with android by making a clean install on that card ,once you got android booting from 16gb card you can try overwriting it with files from other card than see what happends (must install the same version of android as you got in the first one)
It works on the 16GB micro-sd card.
Hello, I new to the Nook Color. I just ordered a couple for the kids for X-Mas. I'm no stranger to rooting etc. As I understand it CM7 will be running off the Micro SD card correct? Does it matter what type of card I use? Does anything get saved to the NC internal memory such as downloads etc? My big question is, Does the Micro SD card's class have any effect on performance? Would getting a class 10 vs class 2 make a difference? Thanks.
The higher the class the faster the performance it will be if ur running the rom from the sd card which you plan to do.
I am running from internal memory but all my stuff is saved on the memory card naturally, I don't have to guide it there it just does it.
somerandomname said:
The higher the class the faster the performance it will be if ur running the rom from the sd card which you plan to do.
I am running from internal memory but all my stuff is saved on the memory card naturally, I don't have to guide it there it just does it.
Click to expand...
Click to collapse
Will it perform better from internal memory than class 10 micro sd? If so is there a guide to do this and would it still require an external card for other stuff? I plan on using CM7 stable and the guides I've seen are for booting from external.
Check this post it might help you decide on what sd card to use and wether to run from internal memory or external: http://forum.xda-developers.com/showthread.php?p=18430544
Sent from my NookColor using Tapatalk
jgaf said:
Check this post it might help you decide on what sd card to use and wether to run from internal memory or external: http://forum.xda-developers.com/showthread.php?p=18430544
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
Thanks... I must have missed this in my search(es).
It has been extensively discussed here. The class is less important than getting a Sandisk card. Class 2 or 4 are fine. They will perform about as well as internal memory. Any others brand, even those with a higher class will suffer more FC's and not perform as well. My class 6 PNY WAS NOT EVEN CLOSE TO A CLASS 4 Sandisk.
I don't know the thread, but it is well documented and should be able to find via search.
My recommendation would be to run CM7 off the internal eMMC and use a blank SD card for backup and storage. In that case it doesn't really matter what card you use but since they are all fairly cheap these days I would get an 8GB card class 6 or higher. One for each Nook. Also get a 3rd card that you will use as a bootable card for the installation. Keep that card handy in case you ever need to reinstall CM7 or if you need to restore to stock for a warranty claim. I kept mine and keep a copy of my currently nightly (201) as well as a full stock ROM (1.3). I already had to make use of it once when I needed to have my Nook replaced under warranty.
Thanks everyone for helping me get pointed in the right direction. I plan on installing CM7 to internal memory and have everything I need to get started.
I don't know if you care, but I would do a first run on the Nook Color and register the device with B&N prior to wiping it and installing CM7 in case you run into warranty issues (such as replacing the USB cord) which you will need to have registered for.
Otherwise +1 on the Sandisk micro SD cards, class # across manufacturers varies wildly. My Sandisk class 4 16GB card outperforms both my class 6 PNY and Transcend 8GB cards in small writes/reads. I had random force closes on the Transcend when I first installed CM7 before I switched to the Sandisk.
EMMC > SD install if you like to tinker with your installs --- the agnostic sd card image here has a barebones recovery and you will not be able, afaik, to manually wipe partitions etc if you so desire or flash non-signed roms and themes (please correct me if I'm wrong, which I very well may be).
I used to dual boot (stock EMMC, CM7 SD card) but as things have progressed this year there's no reason for me to stick to even nootered stock --- the performance difference between stock and CM7.x is massive, and the big bugs have been fixed (SOD, battery drain). Even if you like the default reader app, there's great generic ereaders out there (and now with Overdrive app from Google Market, the ability to borrow DRMed epubs like you could with the native Nook reader client).
Just one note I would add to the above. When deciding between an internal install and dual boot, note that some have reported issues with the latch for the sd card breaking with frequent removals of the sd cards. This latch repair requires factory return. I, personally, would recommend internal install with an sd card for storage. This will prevent frequent removal of the sd card and will extend the life of the card latch.
Just my two cents.....
Sent from my Touchpad using Tapatalk
You don't have to remove the sd card to boot stock.. just power up while holding the N button and you will be given a choice of which system to boot.. this is true if using the Size Agnostic procedure documented here on XDA.
Moshe5368 said:
Just one note I would add to the above. When deciding between an internal install and dual boot, note that some have reported issues with the latch for the sd card breaking with frequent removals of the sd cards. This latch repair requires factory return. I, personally, would recommend internal install with an sd card for storage. This will prevent frequent removal of the sd card and will extend the life of the card latch.
Just my two cents.....
Click to expand...
Click to collapse
The point is well-taken because every time you update your rom, you'll have to take out the card, BUT you have to do that even with the internal memory (emmc) install. But as the previous post indicated, you don't need to take out the card just to boot to stock. I would strongly recommend that you not install the rom to the emmc until after your warranty expires. That way, if you have any problem with the NC, you can simply take out the card, and you're back to stock, i.e. none of the "restore to stock" stuff you'd need to do if you put CM7 on the emmc.
My HTC HD2 works with my Transcend 4 GB microSD card, but it won't android won't boot up with my 8 GB Verbatim microSD card. Do I need to format it or something? Thanks!
Are you sure you have the correct set up ? (Files are copied to their destinations)
Try to format it to FAT32, and try again.
I`have just formated it to FAT32 and still the same problem. What files are you talking about?
PS: Sorry to bother you with "stupid" questions, I am pretty noob in this
I have read that Verbatim SDCards can cause problems in the build; booting or running, SanDisk is your best bet, but you may still be able to get it running,
Im not a dev; just brought SanDisk as a result of this,
Alex
Superdod said:
My HTC HD2 works with my Transcend 4 GB microSD card, but it won't android won't boot up with my 8 GB Verbatim microSD card. Do I need to format it or something? Thanks!
Click to expand...
Click to collapse
It depends on many factors. Which Android Rom do you want flash, does this need Ext 3/4 Partition on the SD Card ? Do you have flashed the right partition size ? Read the installation instructions of Rom you wants to flash, there you mostly find all information.
Are you talking about NAND or SD? If NAND, make sure the ext partition is set up correctly, as this is where a lot of the apps are stored. If SD, then I would assume you know how to install an SD build so it could be a problem with the SD card being incompatible as alex.odell.2011 said.
I've had similar problems sometimes with my SD card; my HD2 wouldn't boot unless I took the card out then put it back in once it was booted. The only thing that I thought might cause it is something CWR related on the SD card, since I had used it in my Hero and Droid 1 as well to flash ROMs to them. It was a class 4 16 GB Sandisk, if that helps at all.