Database Users

HELP

Hi new user and abuser already!
I've just purchased a XDAII which I was told would log onto inetnet from today. Nothing happened so I've tried to download upgrade from O2 website. Halfway through upgrade(which wasn't probably required) it crashed. Now it wont do anything. It won't even switch on. When I try to download upgrade on website now it says something about ROM from vendor! HELP what do I do or have I completely ****ed it up!
Cheers

Message
This is the message I get when trying to upgrade;
ERROR 100 Model ID ERROR
The Rom image you are trying to use is not designed to work with your pocket PC. Please check the vendor website and download the correct Rom update.

following this guide should make you avoid getting that error
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing

SERIAL v1.06
Dont understand what its saying! Is there a simpler way? O2 say if it doesn't reset after Hard reset I need to send it back!

help with new mda lots of problems and i'm confused

ok i've done a bit of searching and i'm pretty sure its software related.
i got an mda pro from when i booted the phone up its had a o2 splash screen, so im assuming its had its software updated. so the phone works fine for about 6 hours or so but then it starts tt freeze up, propgrams stop responding and the phone wont do any thing. i left the phone like this for a few moments then i got a txt and the phone seamed to be working fine untill i went to use the camera and i got "the file camera cannot be opened. either it is not signed with a trusted cert or one of its components can not be found you might need to reinstall or restore this file".
ok so i had a look and found the Available Universal Versions and Upgrades
the thing is i'm not sure which is the best to use or how to do it.
what would you guys recomend i do ?
thanks

MDA Pro with O2 Rom?
Seems so that there is other Rom on it. Normally, this is not a Problem, but who knows, what was changed in this Rom.
I would recommend to download new Rom and install this.

Try http://www.my-xda.com/xdaexec_soft.html
Thats got the latest XDA update.... give it a go and then get the new 1.09.00 radio update too...
Hopefully that will sort you out!

chears i'll give that one a go and see what happpens. fingers crossed

ok so i downloaded the Xda Exec ROM v 1.13.188 from the above site followed the directions in the pdf file, connected the phone and made sure there arnt any programs running in the backgroung. when i try to runn the application to do the upgrade it says its trying to connect to the phone then gives
"error 201: get device data error
can not get device data
please make sure device is connected and run this update utility again"
only problem is that it is connected or so ms active sync says.
any ideas whats goign on or is there another way to update the software ?
thanks guys its apreciated

ok so i managed to get past that stage but
now i get
error 102 ce image file check sum error
the rom image file to be used for the update is corroupt. please download the correct device software update utility and try again.
i have no idea what that means any sugestions ?

@cusaeng, can't help with the ROM update but your initial problem of problems after 6 hours is typical of the Universal when its running low on RAM. Use an app like GSPMaigc+ which can really close processes and reboot once a day (obviously once you solve the ROM issue).

chears i'll look in to that program once i get the rom issues sorted
i've trued downloading a version of the jas jar rom and that give the same error message about being unable to get device information.
when i flashed phones befor eg a motorola a1000 you had to get the phone in to bootloader mode then use a progran to flash it is it a simaler process with the mda ?
i really dont know if i'm doing anything wrong or not

ROM upgrade ERROR!!

Hi,
I have done the upgrade several times long ago and everything was fine, but now I receive some error!
I followed all the instructions - got the Pug's rom. I receive error 150:
"ROM UPGRADE UTILITY ERROR
"This rom upgrade Utility does not design for your device. Please get prope rom upgrade utility and try again."
What does it mean? What should I do?
Thanks!

Need help with error :"run file FILEOP\windows\menu_FILEOP_Open failed "

I had update my HTC Imagio with a new ROM. The other people update this ROM and their Imagio work fine with this ROM. But after ROM update completed, my device restart and informs: "run FILEOP\windows\menu_FILEOP_Open failed "
any body know what this error is, and how to resolve it
thanks

Error Message
I do not know specifically what the error message indicates, but if it were me, I would re-flash with that or another ROM.

My Imagio still working well with the other ROM, but with the ROM D8C2_U1 from PDAViet, it occurs that error, and i tried re-flash that ROM many times but it doesn't work.

http://forum.xda-developers.com/showthread.php?p=8445233#post8445233
More people are experiencing this...

Touch 2 upgrade error

Hi to all...
My Touch 2 is in bootloader mode(red-green-blue-white) and screen "Upgrade ROM code error", I tryed to update with original ROM , but at 12% it's stopped and give me error.
Can somebody help me?
Thx in advance,
Digitall1

Moved to general as not rom development.
How you can upgrade to your stock rom Is that a carrier upgrade or htc web?. You are running a custom rom, right now?
Have you tried a hard reset?

I received from my customer this TOUCH2 in bootloader mode. I tried a hard reset and then I running original custom ROM (downloaded from S/N),but at 12%(not 1% or 2%) progress bar was stopped and Rom Update Utility give me error 262.
It's possible a hardware problems or my steps was wrong?
I tried to write ROM from card- the same problem !