Database Users

disco custom kernel [v.b01]

After some days of testing the new kernel I decided to share it with everyone,
Now just to make things clear, the disclaimer:
Use it at your own risk, If you are unsure of what you are doing please do not flash this kernel.
As a rule of thumb ALWAYS do a nandroid backup first. I will not be responsible for any damage you may get and
I'm almost sure that flashing this boot image will void your warranty, but if you are reading this forum certainly you already did it.
Click to expand...
Click to collapse
ATTENTION:
If you flash 1GHz and have issues please use 768MHz instead.. It seems that not all liquids are stable at 1Ghz.
Click to expand...
Click to collapse
It's available in two versions for the ROM 2.000.16, 1GHz and 765Mhz.
Search the files in here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
Code:
1Ghz
Multitouch (many thanks to Luke Hutchison for all his work and help) [for now, only with Dolphin Browser]
Works very well with clean ROM 2.000.16, installed with acer tool.
Bootloader info is:
Code:
USB FastBoot: V1.00.03
HW version: v0.4
AMSS version: A1-02.01.03
Build Date: Jan 26 2010, 14:29:43
Instructions:
1. Read the disclaimer.
2. Do a nandroid backup.
3. Download and unpack the zip file.
4. Enter bootloader.
5. Do in console/cmd:
Code:
fastboot -i 0x0502 flash boot <boot image name>
fastboot -i 0x0502 reboot
6. Have fun
I didn't posted the unrooted version because when you flash this kernel you will be voiding your warranty (if you already didn't), so doesn't make sense to keep your phone unrooted, unless you really want it.. If thats the case, contact me..
As you may know, this was build from a kernel source that has some bugs on it, so, you may experience some erros.. Didn't found any, but if you find please report..
Dmesg will output some errors, but for now they are armless..

GREAT WORK!
Havn't tested it out yet, gonna do it after tomorrow since I need my phone at work tomorrow.
Is there a noticeable speed-difference when using the 1ghz-version?

Nice work mate!
I'm using the 765Mhz version without any problem. Can anyone tell if the 1GHz causes the phone to overheat?

brumbrum said:
GREAT WORK!
Havn't tested it out yet, gonna do it after tomorrow since I need my phone at work tomorrow.
Is there a noticeable speed-difference when using the 1ghz-version?
Click to expand...
Click to collapse
nferro said:
Nice work mate!
I'm using the 765Mhz version without any problem. Can anyone tell if the 1GHz causes the phone to overheat?
Click to expand...
Click to collapse
There is no overheat on the phone but didn't gave it intensive use yet..
On benchmarks it has significant improvement, but the phone normally has no lag, so, there is almost nothing to be noted ..

finally... in front of a computer... gonna try now!!! u da man disc0!
EDIT: everything working great so far loving the multitouch in dolphin!
testing 1ghz settings

It would be really great if we could have SetCPU working with 1ghz enabled to preserve battery life.
EDIT : I've emailed SETCPU's developer to ask him to set something like he did for the Droid (some kind of autodetection).

ahsid said:
It would be really great if we could have SetCPU working with 1ghz enabled to preserve battery life.
EDIT : I've emailed SETCPU's developer to ask him to set something like he did for the Droid (some kind of autodetection).
Click to expand...
Click to collapse
You can add the information to setcpu.txt with the cpu speeds in the sdcard , but would be great to have support directly from the menu ..

@disco hit me u on gtalk "[email protected]"

What about the battery ?
Does this hack drains it more or not ?

nferro said:
Nice work mate!
I'm using the 765Mhz version without any problem. Can anyone tell if the 1GHz causes the phone to overheat?
Click to expand...
Click to collapse
It wont overheat the qsd8X50 was meant to run at 1ghz.

i'm running it at 1ghz no overheating problems at all for now neighter does the battery run out of juice faster, incredibly the opposite is the case it seems to last a bit longer, maybe cause of the optimized kernel

disc0 said:
You can add the information to setcpu.txt with the cpu speeds in the sdcard , but would be great to have support directly from the menu ..
Click to expand...
Click to collapse
Would you please tell me the numbers of the setcpu.txt?

I had no luck, after flashing 1Ghz no boot avbl, just blank screen. flashed back 765Mhz didn't help. Had to commence back from scratch with A1tools and a .bin

boglll said:
I had no luck, after flashing 1Ghz no boot avbl, just blank screen. flashed back 765Mhz didn't help. Had to commence back from scratch with A1tools and a .bin
Click to expand...
Click to collapse
if u're using eclair it wont work.. this kernel is for donut only

well, now I know...

The 765 MHz version works great with my liquid - but i got bootloops with 1 GHz version, what could i do?

eX1337 said:
The 765 MHz version works great with my liquid - but i got bootloops with 1 GHz version, what could i do?
Click to expand...
Click to collapse
there's a 920 Mhz variant somewhere in modaco, 1ghz works on some (random) liquids only, mine works

[[ Cold ]] said:
there's a 920 Mhz variant somewhere in modaco, 1ghz works on some (random) liquids only, mine works
Click to expand...
Click to collapse
With 920 MHz it boots into Android - but it reboots directly.
Am i so unlocky?
- need some 850 MHz Kernel to try

eX1337 said:
With 920 MHz it boots into Android - but it reboots directly.
Am i so unlocky?
- need some 850 MHz Kernel to try
Click to expand...
Click to collapse
Don't worry! You are not alone

Ultimate FROYO, with all my apps and ADW launcher

1) Installed CM 5.071 and downloaded all my apps.
2) Re-installed Mybackup pro, answered yes to all the root questions.
3) Backed up all my apps
4) Followed the how to install froyo over CM
http://forum.xda-developers.com/showthread.php?t=686631&page=62
5) Once froyo was installed I downloaded astrofile from market.
6) Used it to open reware folder on the SD card, then opened the backups zip file, Then used it to install all my 2.1 apps. Back breaker works all my poarbit games. You have to play raging thunder on froyo.
7)Use your favorite overclocker
8) Down loaded quadrant from market and benchamrked 1359 (TOP OF THE CHART!!)
9) down loaded ADW launcher and defaulted as my launcher.
Sickining fast !!

terminatorxman said:
1) Installed CM 5.071 and downloaded all my apps.
2) Re-installed Mybackup pro, answered yes to all the root questions.
3) Backed up all my apps
4) Followed the how to install froyo over CM
http://forum.xda-developers.com/showthread.php?t=686631&page=62
5) Once froyo was installed I downloaded astrofile from market.
6) Used it to open reware folder on the SD card, then opened the backups zip file, Then used it to install all my 2.1 apps. Back breaker works all my poarbit games. You have to play raging thunder on froyo.
7)Use your favorite overclocker
8) Down loaded quadrant from market and benchamrked 1359 (TOP OF THE CHART!!)
9) down loaded ADW launcher and defaulted as my launcher.
Sickining fast !!
Click to expand...
Click to collapse
I got 1450 on Froyo running at 998 running intersect 925 BFS kernel

1454 overclocked though

1715 with just ravens kernel. No oc.

britoso said:
1715 with just ravens kernel. No oc.
Click to expand...
Click to collapse
I got 1457 with Raven's kernel no OC obviously. Are you using BFS or CFS?
I am using CFS.
Edit: Just ran it again, got a 1606 only thing I did was switch from AD Launcher to Launcher pro. But I only ran each once.

I got 1457 with Raven's 34 kernel 925 BFS

800 bfs 5/27
Important: set Setcpu at 998/998
1715 with just ravens kernel. No oc.
Click to expand...
Click to collapse
I got 1457 with Raven's kernel no OC obviously. Are you using BFS or CFS?
I am using CFS.
Edit: Just ran it again, got a 1606 only thing I did was switch from AD Launcher to Launcher pro. But I only ran each once.
Click to expand...
Click to collapse

terminatorxman said:
1) Installed CM 5.071 and downloaded all my apps.
2) Re-installed Mybackup pro, answered yes to all the root questions.
3) Backed up all my apps
4) Followed the how to install froyo over CM
http://forum.xda-developers.com/showthread.php?t=686631&page=62
5) Once froyo was installed I downloaded astrofile from market.
6) Used it to open reware folder on the SD card, then opened the backups zip file, Then used it to install all my 2.1 apps. Back breaker works all my poarbit games. You have to play raging thunder on froyo.
7)Use your favorite overclocker
8) Down loaded quadrant from market and benchamrked 1359 (TOP OF THE CHART!!)
9) down loaded ADW launcher and defaulted as my launcher.
Sickining fast !!
Click to expand...
Click to collapse
Not to take away from the benchmark comparing that this thread turned into. But you do know that froyo auto installs all of your apps when your sync the first time right? Flash -> wait about 15 mins (depending on # of apps you had installed before) -> open drawer -> tada!

The app restore I knew about, but missing all the good apps
Also,
How do you flash a new kernal or where are these kernals, that will work with froyo??

I benched at 1456
First try.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
terminatorxman said:
Also,
How do you flash a new kernal or where are these kernals, that will work with froyo??
Click to expand...
Click to collapse
At this thread: [.33.5 & .34]intersectRaven's Kernel (Hybrid AVS *Stable*)
Scroll down till you see the mediafire links.
only tested on paulobrien's FRF50 (Froyo) pre-rooted update zip
I'm currently using the CFS 925mV.

Got it! now at 1432
Installed CFS 900mv newest as of today.
Went from 1356 to 1432
Thanks
Any drawbacks of this kernal?? Like liftime?

What benchmark program is that?
I benched at 1456
First try.
Also,
How do you flash a new kernal or where are these kernals, that will work with froyo??
Click to expand...
Click to collapse
At this thread: [.33.5 & .34]intersectRaven's Kernel (Hybrid AVS *Stable*)
Scroll down till you see the mediafire links.
only tested on paulobrien's FRF50 (Froyo) pre-rooted update zip
I'm currently using the CFS 925mV.
Click to expand...
Click to collapse
-------------------------------------
Sent via the XDA Tapatalk App

Daswolven said:
What benchmark program is that?
Click to expand...
Click to collapse
quadrant from market
Click to expand...
Click to collapse
+10.000000

Nailed a 1566 on froyo on the Desire
Also scored a 46.6 Linpack,
OC'ed to 1.267mhz
JD

Daswolven said:
What benchmark program is that?
Click to expand...
Click to collapse
The benchmark app is called Quadrant Standard Edition

1530 BABY YEAH
RUNNING STOCK KERNEL FROM MODACOS KITCHEN ROM!

Thank`s britoso.
Read your post, installed raven`s kernel, 800 BFS. Setcpu performance 998/998.
Got 1684.
didn`t need OC.

terminatorxman said:
9) downloaded ADW launcher and defaulted as my launcher.
Sickining fast !!
Click to expand...
Click to collapse
Hi i have a simple question. How can i install as default the ADW Launcher? Android should open a windows where choose the default Launcher. Just to try i selected the standard Launcher, and now i can't set ADW as default. I can't roll back to the window with the two launcher. May you help me?

Ataru6 said:
Hi i have a simple question. How can i install as default the ADW Launcher? Android should open a windows where choose the default Launcher. Just to try i selected the standard Launcher, and now i can't set ADW as default. I can't roll back to the window with the two launcher. May you help me?
Click to expand...
Click to collapse
Either install home switcher (free in market) or go into settings/applications/running/launcher and clear defaults.

Thank you so much! Solved!
Another question. Using Quadrant i reach different results switching off 3g-2g and killing ,a second before the test, all the app. Is the same to you?

[APP] CPUStats - simple cpu statistics (updated 06.03.2011)

This is simple app that I created to show some info about CPU frequencies and governor.
It's still in development state, but it has what I need to show how CPU governor is doing it's work! It refreshes every 2 seconds.
I tested it on CM 6.1, but it should work on others.
You need to have cpufreq_stats module loaded to get some statistics, and it needs root permission.
Also please note, that cpufreq_stats should be loaded after defining frequencies and setting active governor, otherwise it may collect not so correct data!!
In 0.1 version I added cpufreq_stats.ko binary, so if your ROM doesn't have it, you can TRY to install it. But before you try it, NANDROID YOUR SYSTEM! This modifies 10overclock file, and if something goes wrong, you may end up in boot loop!!!!
If something is missing, or FC, please post output of this commands:
Code:
# find /sys/devices/system/cpu/
# lsmod
and what ROM/device are you using.
Any comments and suggestions are welcome!!
I hope you'll find it usefull!
Compatibility list:
- CyanogenMod 6.1
- MIUI 12-17
- HO!NO!
- Cronos 1.7
- TheFroyoMOD 2.1.2
Module tested on:
- CyanogenMOD 7 RC0
- The FroyoMOD 2.5
- Leaked APAC rom
This should work on any rooted rom and any device; please report back your findings, with exact version or rom and device. If you have any other device with rooted ROM, try it if you like it and report back your findings...
Change log:
06.03.2011, 13:25, v0.1
- Changed startup screen, and now you can even disable it!!
- Changed logic that interacts with system, so it should have faster startup and less CPU usage. Because of this, it will ask root permission again!
- Included cpufreq_stats.ko module, for witch I hope is generic, and it should work on any 2.2 and newer rom. I didn't tested it on 2.1!!!!!
02.01.2011, 09:13, v0.05
- changed reading logic, too small change for new version. If previous 0.05 is working for you, you don't need to redownload!
01.01.2011, 17:15, v0.05
- Additional error checking, hopefully all FC's are prevented
- If module cpufreq_stats is not loaded, it will display warning but it will continue to work. So if you have custom build kernel with compiled in cpufreq_stats, it should work!
- Added welcome dialog
- Added system report generator. This will collect data about your phone that I think is needed to detect where the problem is, or to support new devices. This file will be saved to "/sdcard/CPUStats_sysprofile.txt". Please check file content and if you don't like some data inside remove it, and please report what have you removed. And if you agree, send me that file in PM or attach to this thread (I would prefer PM!).
- If some data cannot be read, it will display values -1 or 0. Usually that means that you don't have cpufreq_stats module, or you are running other device than Motorola Milestone!.
- Happy New year!!!!
22.12.2010, 19:40, v0.04
- OK, thanks to great hint from coolbho3000, finally current frequency works as it should!!! and app starts much faster!
- Refresh time reduced to 1 sec!
- On startup, app will change permission of files that needs to be read to "read to all" (a+r). I don't see that as security issue (in fact only one file doesn't have right permissions, but i decided to check all files), but if you do this that this is security issue, then DON'T INSTALL OR RUN 0.04 version!!!!!
- These files are checked and their permissions are modified as needed:
Code:
/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq
/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq
/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
/sys/devices/system/cpu/cpu0/cpufreq/stats/total_trans
/sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state
/proc/overclock/mpu_opps
19.12.2010, 15:00, v0.03
- All frequencies are listed, no matter did they been used or not.
- Checks is cpufreq_stats module is loaded, and exists app if not
- removed few loops from code, only one left, lower CPU usage , and possibly prevented some of FC if files are missing...
18.12.2010, 17:30, v0.02
- Added percentages to display
- Calculating deepsleep time
- NEEDS ROOT, because only root can get current cpu frequency, it will ask you 2 or 3 times, and you will probably want to check remember because of loop...
(although it doesn't work too effectively, so you will probably get max speed)
17.12.2010, 20:35, ver 0.01
- Added vsel values to display
- Small adjustments to UI
- Added version
- Not working: current cpu freq!? (if someone is willing to help PM me)
- Changed refresh rate to 2 sec
TODO:
- check are required modules loaded
- ability to change refresh rate (not needed??)
- better use of superuser (anyone willing to help??!) (maybe done...)
Screenshot:
v0.03 & v0.04
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
v0.02:
v0.01:
P.S.: file without version name is old one, 0.01!!

Nice! Will try it out.

this is such a nice and simple app. i love it! thank you amossam!

amossam said:
This is simple app that I created to show some info about CPU frequencies and governor.
It's still in very early state, but it has what I need to monitor CPU governor! It refreshes every 1 second.
I tested it on CM 6.1, but it should work on others. You need to have cpufreq_stats module loaded to get some statistics, and it doesn't need root permission!
(...)
Any comments and suggestions are welcome!!
I hope you'll find it usefull!
Screenshot:
View attachment 466611
P.S. Mods; if I posted this in wrong section, please move it to the right one! Thx!
Click to expand...
Click to collapse
Hi Amossam again
And once again: it's great app! Congrats!
One more sugestion: please add the version numbering (or date of app update) as I know you are working on some changes and will be nice to know am I using the current one ;-)
Hope you are working to add vsel setting to stats.
Regards and thanks again!

It isnt working with the Smartass governor on Cronos 1.7.0

bloodhawk said:
It isnt working with the Smartass governor on Cronos 1.7.0
Click to expand...
Click to collapse
it doesn't matter what governor is active, just checked!
can you post result of shell commands in OP ?
thx

@amossam:
Would it be possible for you to show the percentage of time in state?
Like:
1000Mhz 20%
500Mhz 20%
250Mhz 60%
Then there are just to things left I miss A shortcut to the app which shows you the time in sleepmode (don't know its name) and a shortcut to battery-consumption overview
Thx in advance

Skkip said:
@amossam:
Would it be possible for you to show the percentage of time in state?
Like:
1000Mhz 20%
500Mhz 20%
250Mhz 60%
Then there are just to things left I miss A shortcut to the app which shows you the time in sleepmode (don't know its name) and a shortcut to battery-consumption overview
Thx in advance
Click to expand...
Click to collapse
Hey! thx for suggestions...
Time in sleep mode? That is diference between "Total system uptime" and "Uptime". If that, I can add it to display. Or do you mean on SpareParts?
And battery-consumption overview from SpareParts? Well, i can only do shortcut to SpareParts because it has only MainActivity exposed...
Will do, probably this afternoon...

amossam said:
it doesn't matter what governor is active, just checked!
can you post result of shell commands in OP ?
thx
Click to expand...
Click to collapse
My bad. something was wrong with my ROM.
Now it is working. After i installed the latest version of MIUI

bloodhawk said:
My bad. something was wrong with my ROM.
Now it is working. After i installed the latest version of MIUI
Click to expand...
Click to collapse
Great!
can you please tell what version od MIUI you have, so I can put it in OP?
thx

OK ...im on the 12-17 build.
Also the app is FC'ing when using the Smartass governor. For other governors it is working just fine.
Shell output :
tiwlan_drv 859446 0 - Live 0xbf04f000
cpufreq_conservative 4635 0 - Live 0xbf048000
cpufreq_smartass 5055 0 - Live 0xbf041000
cpufreq_interactive 2081 1 - Live 0xbf03b000
cpufreq_stats 1945 0 - Live 0xbf035000
overclock 3819 0 - Live 0xbf02f000
symsearch 673 3 cpufreq_smartass,cpufreq_interactive,overclock,[permanent], Live 0xbf029000
sec 3712 0 - Live 0xbf023000
modem_pm_driver 1764 2 - Live 0xbf01d000
netmux_linkdriver 8302 0 [permanent], Live 0xbf015000
netmux 52159 19 netmux_linkdriver, Live 0xbf000000
Click to expand...
Click to collapse

bloodhawk said:
OK ...im on the 12-17 build.
Also the app is FC'ing when using the Smartass governor. For other governors it is working just fine.
Click to expand...
Click to collapse
hmm, strange. did u installed v0.02?
i just uploaded it and changed few things related to data fetch.
on my cm i changed to smartass, rebooted and it's working without problem...
Sent from my Milestone

It actually starts to force close after after the reboot.
Let me install the latest one. Ill get back in a while.

i just tried the latest version and it force closes after asking for super user perm. i tried 3 times and it FC'd each time. im running cronos 1.6.1 on a milestone.

milestonedude2 said:
i just tried the latest version and it force closes after asking for super user perm. i tried 3 times and it FC'd each time. im running cronos 1.6.1 on a milestone.
Click to expand...
Click to collapse
can you please send logcat and output of two command from OP?
thx
Sent from my Milestone

OK i just observed this...
If i open SetCPU once. The App doesn't have any sort of issues with any governor.

bloodhawk said:
OK i just observed this...
If i open SetCPU once. The App doesn't have any sort of issues with any governor.
Click to expand...
Click to collapse
i don't understand. does it woks or only for first run??
Sent from my Milestone

Running CM6.1 12.12.10 Motorola Milestone.
Overclocked @ 1000MHz, 56Vsel with consercative governor.
Getting FC after starting the app, tried 3 times, same result.

S7oneCu77er said:
Running CM6.1 12.12.10 Motorola Milestone.
Overclocked @ 1000MHz, 56Vsel with consercative governor.
Getting FC after starting the app, tried 3 times, same result.
Click to expand...
Click to collapse
can you please send me relevant part of logcat?!??
thx
Sent from my Milestone

amossam said:
can you please send me relevant part of logcat?!??
thx
Sent from my Milestone
Click to expand...
Click to collapse
there ya go:
Code:
cpufreq_interactive 2081 0 - Live 0xbf038000
cpufreq_conservative 4635 1 - Live 0xbf031000
overclock 3819 0 - Live 0xbf02b000
symsearch 673 2 cpufreq_interactive,overclock,[permanent], Live 0xbf025000
sec 3169 0 - Live 0xbf01f000
modem_pm_driver 1524 2 - Live 0xbf019000
netmux_linkdriver 7724 0 [permanent], Live 0xbf025000
netmux 48208 19 netmux_linkdriver, Live 0xbf000000

[SETCPU] Post your setcpu profiles here!

This is for those who are using overclocked kernels..Thanx to fugumod and other kernels that we can now overclock our G3 !
Please share the "setcpu profiles" you are using and the "BATTERY EXPERIENCE" with them..
This will help other users to get the most out of their phones

These are my profiles...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

to bad nobody else added some profiles here i was searching for more information about this topic ..

here is mine

vikraam said:
here is mine
Click to expand...
Click to collapse
I suppose its Fugumod right?? 2.4 800 MHz edition?? How much battery bakup do you get with these profiles with normal usage??

vikraam said:
here is mine
Click to expand...
Click to collapse
dhirend_6d said:
I suppose its Fugumod right?? 2.4 800 MHz edition?? How much battery bakup do you get with these profiles with normal usage??
Click to expand...
Click to collapse
Sorry, didn t see your signature at first. You have ultra edition. How much battery backup do you get with normal usage??

dhirend_6d said:
I suppose its Fugumod right?? 2.4 800 MHz edition?? How much battery bakup do you get with these profiles with normal usage??
Click to expand...
Click to collapse
Its fugumod ultra pre release which was posted by pwng3
with normal usage i get one and half day

My profiles:
Battery: I got 2 full days with those profiles with normal usage.

Can I use setcpu on my rooted apollo, or do I need to have a special kernel?

SparkyRih said:
Can I use setcpu on my rooted apollo, or do I need to have a special kernel?
Click to expand...
Click to collapse
You can install but you can t use it for anything. . You need to flash an OC kernel in order to OC.

Just changed the values in SetCPU. I will post soon how the battery life is.

dhirend_6d said:
You can install what you can t use it for anything. . You need to flash an OC kernel in order to OC.
Click to expand...
Click to collapse
Yeah, I was scared that would be the case
Thank you for your answer

Need Help
Hey Guys,
I am new to the Forum, I Have flashed with Indroid 4.3 Darkfroyo(Hyper Mix). Now I need to flash my Kernel with Fugumod Ultra. Can someone tell me how to flash the Fugumod ultra O.C edition to my galaxy 3 apollo. Please help me .

anukuttan said:
Hey Guys,
I am new to the Forum, I Have flashed with Indroid 4.3 Darkfroyo(Hyper Mix). Now I need to flash my Kernel with Fugumod Ultra. Can someone tell me how to flash the Fugumod ultra O.C edition to my galaxy 3 apollo. Please help me .
Click to expand...
Click to collapse
There is an update.zip for it in the fourth page of that thread http://forum.xda-developers.com/showthread.php?t=1134369&page=4

Thanks to this post my phones battery is going to last a lot longer May i ask, how do you take a screenshot on your phone?

I use G3Mod Ultimate 1.3.4 200-1200 Mhz and I keep it simple
I have just one option enabled in profile, which is if temp > 40 clock 200-400 conservative
Rest I have kept it at 200-800 Mhz On Demand at all times.
When I play Games I set it to 600-1200 On Demand.
I have been using it since 1.3.4 G3Mod Ultimate was released, and have not faced any Overheating, Lags, freezes what so ever. It does last around 1.5 to 2 days.
My quadrant score (ofcourse other tweaks as mentioned in my signature also applies)
at 600-800 on demand is around 590
at 600-1200 on demand is around 710

Smonic said:
Thanks to this post my phones battery is going to last a lot longer May i ask, how do you take a screenshot on your phone?
Click to expand...
Click to collapse
You can search Market for apk named Screenshot IT

Or you can just hold down the back button and press the home key for a screen shot
Sent from my GT-I5800 using Tapatalk

Best way of taking screenshot is through Qtadb
It can take screenshots in any apps
back key+home doesnt work in some apps

[KERNEL] G3MOD Kernel Feedback

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
G3MOD TEAM
Founder
dharamg3
Kernel Developers
hillbeast , moikop , cool.darshak
Application Developers
dympy , andreapier
ROM/Theme Developers
Stylooo , RafayelG , aarrun​
This is the Official thread for g3mod kernel feedback.

Reserved for FAQ's

Reserved for FAQ's

Reserved for FAQ's

Reserved for FAQ's

Last Post for FAQ's

@Everyone: Use this thread from now on

I have 1.8 performance kernel. How do i flash 1.9 with cwm? i won't lose any data right?
Does my battery need to be 100% to do that? Thanks for all the great work and support
EDIT: The "g3mod_froyo_v1.9_performance.zip " is for cwm?
And the "g3mod_froyo_v1.9_performance.tar " is for odin?
Maybe you should have put cwm or odin in the names, like in the last version

I really need help with my g3 i had g3 mod 1.6 ultimate but phone freezes too much like 5 times in 30 min if i use it if i don't use it for about 2h it freezes and then i tryed 1.5 ultimate because someone told me that is more stable the same thing happens when i play games my cpu is max 1000 min 600 and it just freezes so is there anyway to have 1000-1200 MHZ without that much freezes i now use fugumod but it is only 800 MHZ all games LAG

It's unstable
g3mod kernel (froyo) v. 1.9 extreme is unstable. I belive it has some issues with overclocking (or cpu speeds in general).
The phone freezes or screen simply crashes (goes black although backlight remains on).
It happens almost exclusively when manipulating main profile cpu speeds (because SetCPU says that it runs on 800MHz when it should be 1400MHz so I try to "help" him - and then it crashes/freezes).
Now, I assume you're going to tell me to try lower freq. kernel like performance or such but I do wan't to. g3mod 1.8 extreme did not have such issues.
ROM is currently Kyrillos 7.1, flashed by ODIN, not cwm or multiboot, cache, dalvik and data wiped. Have flashed it recently so there is a possibility that it might be rom issue although i've been running kyrillos 7.1 on g3 1.8 kernel for about a day and it wasn't crashing (not once). v. 1.9 crashed one way or another ~6 times in the last 2 hours.
Will flash back g3 1.8 (extreme, of course) and test it thoroughly to see whether it will crash so I'll report you with info if you're interested.

mrvek said:
g3mod kernel (froyo) v. 1.9 extreme is unstable. I belive it has some issues with overclocking (or cpu speeds in general).
The phone freezes or screen simply crashes (goes black although backlight remains on).
It happens almost exclusively when manipulating main profile cpu speeds (because SetCPU says that it runs on 800MHz when it should be 1400MHz so I try to "help" him - and then it crashes/freezes).
Now, I assume you're going to tell me to try lower freq. kernel like performance or such but I do wan't to. g3mod 1.8 extreme did not have such issues.
ROM is currently Kyrillos 7.1, flashed by ODIN, not cwm or multiboot, cache, dalvik and data wiped. Have flashed it recently so there is a possibility that it might be rom issue although i've been running kyrillos 7.1 on g3 1.8 kernel for about a day and it wasn't crashing (not once). v. 1.9 crashed one way or another ~6 times in the last 2 hours.
Will flash back g3 1.8 (extreme, of course) and test it thoroughly to see whether it will crash so I'll report you with info if you're interested.
Click to expand...
Click to collapse
Same here. FuguMod Ultra is more stable and have better performance.

me too.... Fugu Mod ultra is stable and faster and better performance... Why cant someone use FuguMod kernal with CWM recovery.......

FeedBack
Flashed yesterday v1.9 of g3mod. Working fine with min freq as 100 and max as 1000 and odemand scaling. Pretty stable. Enjoyed using it. Hope that you continue to bring new feautures in g3mod kernel. Loved it. hats off to the team.
Best part of 1.9 - 100mhz steppings.
EDIT: YEpp there are some crashes. It happens that when the Screen is switched off in sleep mode it crashes and then when I press power or home button nothing happens

I agree that fugu ultra is quite good, has been stable for me at 1.3 ghz and perfomance is very good. But i still somehow prefer g3mod. It is very good, excelent performance... I sincerely hope that the team will make it stable in future versions as well. Speaking of which...
Have flashed g3mod kernel 1.8 this morning and have had no crashes nor freezes. Rom is still kyrillos 7.1. It's been aprox. 4 hrs now and all is well, unlike 1.9 which crashed almost immediately. I've been manipulating each and every aspect of setcpu and had no problems. For this reason i belive that the previously stated problem is caused primarily by g3mod kernel in it's version 1.9 :-(
Makes me sad, i like g3mod, specially it's cwm, multiboot and oc capabilities.

V1.9 has some problems related to Multiboot
I cannot switch kernel from it :/

BatteryCalibration app by marosige version 1.2 does NOT work, always
Hello.
Thanks for this wonderfull piece of software.
After upgrading from 1.8 performance to 1.9 performance, the BatteryCalibration app by marosige version 1.2 does NOT work anymore on the first times I tried to calibrate: it showed an "unsupported" message. Now it is working again, I think...no messages of errors... will try a few more times and report.
Thanks.

santhosh5639 said:
me too.... Fugu Mod ultra is stable and faster and better performance... Why cant someone use FuguMod kernal with CWM recovery.......
Click to expand...
Click to collapse
I have a fugumod version with intergrated CWM But i dont remember if it has bugs. Anyway, Dharam have done awesome work with g3mod. I prefer g3mod over fugumod

kyrillos13 said:
I have a fugumod version with intergrated CWM But i dont remember if it has bugs. Anyway, Dharam have done awesome work with g3mod. I prefer g3mod over fugumod
Click to expand...
Click to collapse
Me to. Fugumod is very good. Only, I got used to g3mod. But it keeps crashing.
What rom are you using? (I have to ask )
Is it kyrillos? Do you use g3mod kernel 1.9? What edition? Did it crash/freeze? Did it work? How did you make it work?

v1.9 with DXJPC
Using g3mod_cm6.2_v1.9 with DXJPC but the wifi showing error ? Any idea ?

sreerajpsin said:
Using g3mod_cm6.2_v1.9 with DXJPC but the wifi showing error ? Any idea ?
Click to expand...
Click to collapse
you need the froyo kernel...