Database Users

USB desktop connection driver issue [solved]

was struggling yesterday to connect mytouch to the desktop on windows XP. The phone connected to the moment, the drive showed up and when immediately disconnected.
I found this very helpful post on androidforums by pdl1 which I think needs to be posted in FAQ:
To connect an Android phone to a Windows PC, usually there are two steps:
1. Uninstall current Android USB drivers
2. Install new correct Android drivers
You accomplish 1 by downloading USBDeview to your PC here is the URL USBDeview - View all installed/connected USB devices on your system
Then unzip it and run USBDeview. Right click on each Android driver and delete it. Or you can remove traces of previous drives by removing all keys in registry using "Edit->Find and type in “vid_0bb4″ (no quotes)".
You accomplish 2 by going here Android 1.6 SDK, Release 1 | Android Developers
and downloading the whole Android SDK (software development kit) onto your PC. Extract it to a folder so you can look inside and find a sub-folder called usb_driver. Either move it somewhere easy or take careful note of it's exact location.
Now go to your Android phone. Open Settings. Touch Applicatons. Touch Development. Tap USB debugging to enable it. Then back out to the home page.
Connect your phone to the PC via the appropriate USB cord. Windows will open its New Hardware Wizard. Check that you will tell Windows where to find the files, and Browse to the location of the usb-driver folder. OK will ungrey and if you click it, the correct drivers will, at last, be loaded.
Almost finished. Now disconnect the phone, and repeat going to Settings>Applications>Development. Tap the debugger again to disable it. Back out to the Home Screen. Now connect your phone to the PC. It will be recognized, but in order to see and manipulate the SD card files, there's one more step. Pull down the little white bar at the top of the Android Phone screen. You will see a Notification "USB connected". Tap it and you will be given an option to Mount the phone. Touch Mount.
Now the any File Manager (Windows Explorer, etc.) will see your phone SD card as a separate drive. You can copy, move delete, whatever.
Quite a process, but once done, all you will have to do is connect the phone to the PC and pull down and Mount it.
Sorry if it was discussed already - I searched but could not find similar thread here

[Q] baffling mutiple files and internal not showing on pc

Hello all my main laptop went down, i used it to root my a501 it reconized it internal and external drives,and used it to instal v8 bootloader and flexreaper-relix-gt-rev1. ok think it had one hiccup where using multipicture live wallpaper it deleted the pics out of the folders assigned to each home screen,
But tried to tranfer movies to tablet from other laptop and the transfer bar just sits there, i try to go in movie folder on tablet storage and it shows up empty but can see using Es file explorer.
Also when i connect it tries to install device driver with no luck .,,anyone Have any ideas please!!!!
also says mtp failed

acer
in device manager.acer composite interface adb interface shows fine,but under portable devices mtp with the typical yellow explination point

other error code
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)

help plsssssss!!!!!!!!!!!!!!!

bump

Kogan Agora HDMI Smart TV Quad Core - Root Access

Hi,
So I have had a good experience with the Kogan Agora 7" a couple of years ago. I flashed a new ROM and my 6 year old still idolizes it. It's perfect for games and movies while traveling and cost bugger all.
I was considering getting my kids a console unit for games but came across the new Quad core HDMI Dongle. I though to myself there is the ticket, When traveling i could use it as a smart TV (plug and play is King) Or it may be possible to replace or augment my Media-portal HTPC system.
I bought one and on the face of it it appears to do all that I require from an Android device like web surfing, mail checking and video streaming fine, except when it came to installing the Playstation controller.
I needed Root access and it was a bit of a pain to get it done. BUT I found it!
I used RK3188_ROOT for CX-919 FW0715 MOD by Everal. found here.
1. Turn the device on
2. Make sure USB debugging is enabled
3. Connect the device to Win7
4. Start the file "TPSparkyRoot.bat" as admin
Enjoy.
So if anyone decides to purchase one of these to play with, you will be glad to know that it is a Rockchip RK188. Weather you think that hardware is good or not is irrelevant but it is useful to know as I tried many methods to gain root but once I had this bit of info it became easy.
Those infinity Pocket PC's may be the same although I can't be sure.
I managed to pair a sixaxis controller and am working on getting it running in a game. I will post if i have any more issues and or success.

Raskern said:
1. Turn the device on
2. Make sure USB debugging is enabled
3. Connect the device to Win7
4. Start the file "TPSparkyRoot.bat" as admin
Click to expand...
Click to collapse
Thanks for posting this info. However I'm not able to get this to work. My PC doesn't recognise the device when it's in "USB Debugging" mode. In the device manager it just appears in "Other Devices" as "KHSTVQCDONA". I've tried updating the software, selecting the "usb_drivers" folder containing drivers provided in the downloading Zip file, and also tried downloading the "Google USB Drivers" directly from Google, but Windows doesn't find the drivers for this device.
If I disable "USB Debugging" the device does connect successfully under "Portable Devices", but clearly that's not much use.
I can't seem to figure it out.
Below are the steps I took in trying to get it to work. I was going to write it as a guide for dummies, but I never got it working...
Download the software from the link above. On the "Share-Online" page click the small-ish button that says "continue for free", and not the bit "DOWNLOAD FILE (regular download)" button in the banner ad (that I feel very silly for clicking several times).
Once the file "RK3188_ROOT for CX-919 FW0715 MOD by Everal.zip" has finished downloading, extract it to a temp location on your PC.
Make sure the Micro-USB port of the device is connected to a power source (either your PC or the provided AC adapter). The port doesn't seem to transfer data.
On the Agora device, go to "Settings", open the "USB" menu, and enable "Connect to PC". Without this the device wasn't recognised by my PC at all.
In "Settings", click on the "Developer options" menu, and tick "USB debugging".
Connect the provided blue Male-Male USB cable to a full-sized USB port on the device, and to a USB port on your PC. At this stage the device connects but is not recognised.
Open the Windows "Device Manager".
In the "Device Manager", expand "Other Devices", then right-click on "KHSTVQCDONA" and click on "Update Driver Software".
Click "Browse my computer for driver software".
Navigate to the "usb_drivers" folder of the software you extracted earlier, select it, and click "OK".
Click "OK". THIS DIDN'T WORK, stating that "Windows was unable to install your KHSTVQCDONA" and "Windows could not find driver software for your device".
[*] Open "Command Prompt", by right-clicking on it and clicking "Run as Administrator".
[*]C:
[*]cd RK3188_ROOT
[*]TPSparkyRoot.bat
At this point I see the following:
*---* VonDroid.com N101 II Root Tool based on work by sunnydavid *---*
--- Plug in your device, make sure debugging is enabled in Developer Options
--- This script will now copy files over to your N101 II
error: device not found
error: device not found
error: device not found
--- Reboot 1/3 - Press Space Bar once the device has rebooted
Press any key to continue . . .
error: device not found
error: device not found
error: device not found
--- Reboot 2/3 - Press Space Bar once the device has rebooted
Press any key to continue . . .
error: device not found
--- If the ID shows as 0/root then continue, otherwise CTRL+C to cancel and star
t over
Press any key to continue . . .
Click to expand...
Click to collapse
I terminate at this point
I've also done the following
Un-ticked "Verify apps over USB"
In "Security", ticked "Unkown sources", and un-ticked "Verify apps"
At this point I'm totally at a loss.
I had already started using the device initially, so I did a factory reset, but this hasn't helped at all.
Can you see anything I'm missing, or point me in the right direction?
Many thanks in advance! :good:

Ok So I know i messed around with many drivers installing and uninstalling before it worked. I Thought it was the last set that came with the Root method but I may be wrong.
Also I cant remember exactly now but I am pretty sure if you activate the connect to computer you bypass the ROM and connect to the SD card and the U SD. So that would not help when accessing the root files.
Try re-installing the drivers after connecting without the box checked in settings or try the ones from super oneclick 2.3.3 or even the pocket pC ones. you may also need to uninstall the device then reconnect to get a clean run at it. Windows likes hanging onto what it thinks is the best driver even when they don't work or are completely wrong.
Also I ran the batch file form within windows not in console, Just right clock to run as administrator.
I have just used it for a couple of weeks in Japan get let the Kids watch Aview (iView) and it worked a treat. Also the latest sixaxis updates made the controller even better than before. I can probably have a tool around with it later this week but I am busy before then so wont be able to help any. It can be done!
PM me if you cant find the drivers mentioned above I can email them to you.

Thanks for the quick response.
Can you just confirm that you were connecting using the blue Male-Male USB cable, and not a USB-Micro-USB cable?
When I connect to the Micro-USB port it doesn't see a device at all. It just seems to provide power.
When I connect with the blue Male-Male USB cable, unless I have "Connect to PC" ticked, it also doesn't see a device.
I don't have a micro-SD card installed, but that doesn't matter right?
I'll try those drivers you suggest. Thanks.

I am quite keen to figure out what is different but I cant access it for a couple of days sorry.
I definitely used a full sized USB to Connect, I may have used another one, and powered it from the Micro USB direct to power supply. If you are connecting it to the PC for power it may cause problems.
I know that you cannot access the recovery menu unless you are powering through the Micro USB only. Another thing I meant to mention in my original post. I may have posted it elsewhere.

SUCCESS! After I got the SuperOneClick software to forcibly install the drivers the device was then recognised and I could root the device.
Thanks. I'll write up the full instructions.

Excellent!! Thanks for writing up the guide.

OK, here is a full step-by-step guide for getting this to work:
Download "SuperOneClick" from Download.com (CNET). I can't post external links right now because I'm a new user, but it will appear if you do a Google search.
Extract SuperOneClick to a temporary location ("C:\temp" for the purpose of this installation).
Download the software from the link in the first post above. On the "Share-Online" page click the small-ish button that says "continue for free", and not the big "DOWNLOAD FILE (regular download)" button in the banner ad (that I feel very silly for clicking several times).
Once the file "RK3188_ROOT for CX-919 FW0715 MOD by Everal.zip" has finished downloading, extract it to a temp location on your PC (for the purpose of these instructions "C:\temp").
Make sure the Micro-USB port of the device is connected to a power source (ideally the provided AC adapter). The port doesn't seem to transfer data so don't connect it to your PC, unless you are using your PC as the power source. Basically as long as it's turned on, then continue.
On the Agora device, go to "Settings", open the "USB" menu, and enable "Connect to PC". Without this the device wasn't recognised by my PC at all.
In "Settings", click on the "Developer options" menu, and tick "USB debugging".
Connect the provided blue Male-Male USB cable to a full-sized USB port on the device, and to a USB port on your PC. At this stage the device connects but is not recognised.
Open "SuperOneClick"
In SuperOneClick click the "Advanced" tab, then click "Check Drivers".
When prompted to ask if you would like it to forcefully install drivers, click "Yes".
Click the "Install..." option when prompted by "Windows Security".
You should then hear the device connect, and disconnect, and see an message "Driver installed! Please reconnect your device", so click "OK".
Disconnect the blue USB cable from you PC, and then reconnect it. You should hear that the device has connected successfully (and it now appears as "Android Composite ADB Interface" in you "Device Manager" if you care to check.).
Open "Command Prompt", by right-clicking on it and clicking "Run as Administrator". (I found that running the .bat file directly failed because it didn't find the "adb" application)
C:
cd temp\RK3188_ROOT
TPSparkyRoot.bat
Follow the prompts from here. The application should reboot your device several times (if not something is wrong), after which point you press any ket to continue. From here everything was very straight-forward once the .bat file completed the device was then rooted.
Enjoy

I had to do things differently......
Used rocketchip_batch_tool_1.7 for drivers, superoneclick didnt do anything.
I ran the batch from the folder on my desktop.
For EACH device re-boot i had to RE CHECK connect usb on cx919 settings.
I got a few errors about no more storage on my device when it tried to copy some stuff, although i have the super user and i tried sixaxis controller which requires root and it worked. Not sure what the files were.
update:
Hmm and it seems SSL websites dont work now as well as Netflix or the Store.
ill have to try something else!
Update:
did a factory wipe. all seems ok now.
TeqTeq said:
OK, here is a full step-by-step guide for getting this to work:
Download "SuperOneClick" from Download.com (CNET). I can't post external links right now because I'm a new user, but it will appear if you do a Google search.
Extract SuperOneClick to a temporary location ("C:\temp" for the purpose of this installation).
Download the software from the link in the first post above. On the "Share-Online" page click the small-ish button that says "continue for free", and not the big "DOWNLOAD FILE (regular download)" button in the banner ad (that I feel very silly for clicking several times).
Once the file "RK3188_ROOT for CX-919 FW0715 MOD by Everal.zip" has finished downloading, extract it to a temp location on your PC (for the purpose of these instructions "C:\temp").
Make sure the Micro-USB port of the device is connected to a power source (ideally the provided AC adapter). The port doesn't seem to transfer data so don't connect it to your PC, unless you are using your PC as the power source. Basically as long as it's turned on, then continue.
On the Agora device, go to "Settings", open the "USB" menu, and enable "Connect to PC". Without this the device wasn't recognised by my PC at all.
In "Settings", click on the "Developer options" menu, and tick "USB debugging".
Connect the provided blue Male-Male USB cable to a full-sized USB port on the device, and to a USB port on your PC. At this stage the device connects but is not recognised.
Open "SuperOneClick"
In SuperOneClick click the "Advanced" tab, then click "Check Drivers".
When prompted to ask if you would like it to forcefully install drivers, click "Yes".
Click the "Install..." option when prompted by "Windows Security".
You should then hear the device connect, and disconnect, and see an message "Driver installed! Please reconnect your device", so click "OK".
Disconnect the blue USB cable from you PC, and then reconnect it. You should hear that the device has connected successfully (and it now appears as "Android Composite ADB Interface" in you "Device Manager" if you care to check.).
Open "Command Prompt", by right-clicking on it and clicking "Run as Administrator". (I found that running the .bat file directly failed because it didn't find the "adb" application)
C:
cd temp\RK3188_ROOT
TPSparkyRoot.bat
Follow the prompts from here. The application should reboot your device several times (if not something is wrong), after which point you press any ket to continue. From here everything was very straight-forward once the .bat file completed the device was then rooted.
Enjoy
Click to expand...
Click to collapse

Worked fine since then. All a sudden same prob, no Netflix no store. Wtf?

Just wanted to post an updated root method since i got one of these second hand last week
1. get the universal rockchip drivers, or the latest generic google ones. both worked for me on two different PC's. (including windows 8.1 x64)
2. Enable USB Debug mode in developer options. you know the drill.
3. the kogan device has a "USB" menu in settings, that has a 'connect to PC' setting. turn that on or ADB cuts out shortly after the system boots - turn it off after rooting for it to work normally.
4. connect PC to kogan dongle via the USB port next to the power LED. The other one doesnt work.
5. root with whatever method you want - i used kingo root which rooted it flawlessly first time.
6. have fuuuuun!
3 and 4 stumped me for days til i figured out what was going on. not something i'd ever encountered before, and likely unique to this device and why some people cant figure it out.

Nokia 6 USB Driver

Hi. I am a Windows Phone transplant. I got my Nokia 6 from Amazon and I am connecting it up via USB to put my music collection on the SD card. When I connect, it mounts as a CD and there is a setup for what looks to be the drivers there. When I run setup, nothing happens. The computer is Win 10. When I took the phone out of the box (from Amazon US), I noticed that the Amazon preloaded app took me to the Chinese Amazon site. so I think that this version is based heavily on the Chinese ROM. Does anyone have a direct link to the USB drivers for the PC? The ones I have seen on searching all look very dubious.
It was pretty cool turning this phone into an Android powered/Microsoft Services phone.
thanks

The Amazon app is just configured for Chinese. You can select another language, just go to the link next to the flag, drop down box, find the USA flag.
For the USB connection, after you connect the phone to the PC, on the phone, swipe down from the top and you should see a notification "USB *****". The "****" could be PTP, charging, MTP, etc. You want to use MTP to transfer files to the phone.

I am using MTP to connect, but has I mentioned, The phone is opening as a CD-ROM on the computer where there is a setup program with Drivers on it and it is write protected. If I try to run the setup program that it presents, Nothing happens. It starts, and gives me the Admin make changes screen, but after that nothing. This is the drivers that I think need to be on my computer to mount the phone properly to transfer files.

Mine did the same but as the previous poster said change it to mpt on the phone then in file explorer Nokia 6 appeared and when I clicked on it both the internal and sd cards showed up and I copied my music folder directly to sd card
Sent from my SM-T800 using XDA Free mobile app

I have the same issue. I tried choosing the MTP, even PTP as well, from the USB options, but still no luck in seeing the internal storage of my phone. Maybe this is a Windows 10 issue? I tried connecting my phone on my windows 8.1 PC and it worked fine. Anybody has a workaround on this?

my phone always have a pop-up ask me if I want to enable file transfer when I connect to a pc, maybe check if yours have the same pop-up.
Sent from my TA-1003 using XDA Labs

Phone does not show as drive
When I connect my Nokia 6 via USB, I get a popup asking what i want to do (charge, charge and transfer and two I can't remember at the moment). It does not show up as a (USB) drive (i.e. it is not assigned a drive letter), but among the Libraries (like Downloads, Pictures, etc.). I see the CD-ROM drive with the USB driver setup as well, but I guess you only need that when the phone does not show up right away. (Maybe on older versions of Windows?)
I can write to the phone and the SD card. I have a 64 GB Samsung class 10 card, it writes at only 12 MB/s; is that normal?
When I clicked 'Properties' on the SD Card, I saw that it was formatted as FAT32, so that explains why I can't write large (>4 GB) video files to it. Shame. Does anyone have an idea if this is ever gonna change?. I tried formatting the card to ExFat, but then the phone just says 'incompatible file system' or something like that.

Can't get access to my phone data mother internal nor external
I am using MTP to connect, but has I mentioned, The phone is opening as a CD-ROM on the computer where there is a setup program with Drivers on it and it is write protected. If I try to run the setup program that it presents, Nothing happens. It starts, and gives me the Admin make changes screen, but after that nothing happens. Pls help me guy's......

I have the same problem on Windows 8.1 x64

Nevermind, I found the solution for my device, I can't guarantee it's the same for you.
Open your settings on your phone
Go to About Phone
Repeatedly tap on Build number untill a message pops
up saying that you're a developer now.
Go back into settings and open Developer options now
Scroll down and find USB Debugging and turn it on.
That's it, you should be able to manage your files now

Finally Nokia is making Andorid based phones now. Because Android is the kind of OS people need today. With tons of application choice.
You can download the ADB driver for your Nokia in this link:
https://dl-ssl.google.com/android/repository/latest_usb_driver_windows.zip

change your cable. That's what the problem is

File transfer on Linux

I am having trouble with file transfers on Linux (openSUSE 42.3). The phone is the Verizon version of HTC 10.
(To score some sympathy points, I just ordered and received this phone from ebay. It unfortunately was already "upgraded" to version 2.41.605.36, so until someone makes a hack available I am stuck with Verizon software.)
Initially when I connected the phone to the computer, the device notifier came up with "Camera" only. In this mode files cannot be uploaded to the phone.
I then edited the "libmtp.rules" file to include the vendor id and product id of the phone. After doing this the device was recognized as "Android phone". There were two options to open a file explorer---one which opened it again as "Camera" and a second which should be a file explorer in "mtp" mode, however clicking on this icon led to a error message:
HTML:
The file or folder udi=/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/ does not exist
.
I realize this is more of a linux-specific question, and I haven't yet tried posting it on a linux forum, but I thought I would try here first to see if anyone else had this sort of trouble with this phone on this operating system.

evetsnameloc said:
I am having trouble with file transfers on Linux (openSUSE 42.3). The phone is the Verizon version of HTC 10.
(To score some sympathy points, I just ordered and received this phone from ebay. It unfortunately was already "upgraded" to version 2.41.605.36, so until someone makes a hack available I am stuck with Verizon software.)
Initially when I connected the phone to the computer, the device notifier came up with "Camera" only. In this mode files cannot be uploaded to the phone.
I then edited the "libmtp.rules" file to include the vendor id and product id of the phone. After doing this the device was recognized as "Android phone". There were two options to open a file explorer---one which opened it again as "Camera" and a second which should be a file explorer in "mtp" mode, however clicking on this icon led to a error message:
HTML:
The file or folder udi=/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/ does not exist
.
I realize this is more of a linux-specific question, and I haven't yet tried posting it on a linux forum, but I thought I would try here first to see if anyone else had this sort of trouble with this phone on this operating system.
Click to expand...
Click to collapse
Yes!! camera:/USB PTP Class Camera is what you initially see when it is plugged into the USB port. (openSuSE 42.3). You click on that and you get to folders: store_528b0001 and store_00010001 along with two text files: about.txt and summary.txt. The store_528b0001 is the external SD card and store_00010001 is the internal storage.
Now then, I have had trouble finding all my photos EVEN THOUGH they are supposed to be in DCIM/100MEDIA in the internal memory. I can see the pics on the phone but not from my PC when connected. At least not all of them. Just took some 'recent' pics and I can see them from my PC. ??
As for the write... you can not copy a file from the PC to the camera with SuSE Linux -but- you can with Windows. I use VMware and have Windows 10 installed. You can use this Windows to copy a file from the PC to the Android Phone. At least I have.

Chucktr said:
Yes!! camera:/USB PTP Class Camera is what you initially see when it is plugged into the USB port. (openSuSE 42.3). You click on that and you get to folders: store_528b0001 and store_00010001 along with two text files: about.txt and summary.txt. The store_528b0001 is the external SD card and store_00010001 is the internal storage.
Now then, I have had trouble finding all my photos EVEN THOUGH they are supposed to be in DCIM/100MEDIA in the internal memory. I can see the pics on the phone but not from my PC when connected. At least not all of them. Just took some 'recent' pics and I can see them from my PC. ??
As for the write... you can not copy a file from the PC to the camera with SuSE Linux -but- you can with Windows. I use VMware and have Windows 10 installed. You can use this Windows to copy a file from the PC to the Android Phone. At least I have.
Click to expand...
Click to collapse
Sorry to neglect this thread that I started, but actually the problem turned out to be the mtp version that came with Leap 42.3. Updating this (libmtp9) from version 1.1.13 to 1.1.14 fixed the problem. I can now access internal storage as "read/write".