Database Users

iGO 8 Power Management -> Keyboard aa bug

I got keyboard aa bug on iGO 8.3.4 when change the power management setting to always on or smart. Cannot type anything on the keyboard. Anyone has idea to solve the problem?

read from some other forum and it seems to be the issue with shipped rom. Some one has the same problem on blackstone and solved by install cooked ROM.

You can change back to default skin, close iGO8, delete the SAVE folder (after backing it up if you have things you want to keep), and relaunch iGO8 for a temporary solution.
I solved mine by adding the following to sys.txt:
Code:
[device]
type="ALIAS_TOUCH HD"
sdcard_dsk_num=7
Well, at least for now. Hasn't seen it popping up since.
Here my full sys.txt (Landscape, full screen), just in case.
Code:
[device]
type="ALIAS_TOUCH HD"
sdcard_dsk_num=7
[folders]
app="%SDCARD%/iGO8"
[interface]
maxzoom2d=6000000
show_exit=1
skin="ui_igo8"
vga=1
mapfontscale=100
width=800
height=480
resolution_dir="800_480"
[debug]
skip_eula=1
[rawdisplay]
class="landscape"
highres=0
screen_x=800
screen_y=480
driver=GDI
(Note: you need a data.zip that has the ui_igo8/800_480 and ui_igo8/480_800 folders, otherwise it will fail to boot; check your version)

Hi people, try this:
in data.zip / config / keybind.txt / [default]
add :
x87="NOP"
xE5="NOP"
it works with R3 version
All the best

stdk said:
Hi people, try this:
in data.zip / config / keybind.txt / [default]
add :
x87="NOP"
xE5="NOP"
it works with R3 version
All the best
Click to expand...
Click to collapse
You are star mate! It was well with customised skins.
Should be stick on the forum for iGO8.

stdk said:
Hi people, try this:
in data.zip / config / keybind.txt / [default]
add :
x87="NOP"
xE5="NOP"
it works with R3 version
All the best
Click to expand...
Click to collapse
I love you!!!
You solved my problem!

stdk said:
Hi people, try this:
in data.zip / config / keybind.txt / [default]
add :
x87="NOP"
xE5="NOP"
it works with R3 version
All the best
Click to expand...
Click to collapse
Genius... Sheer genius!
Thank you, that solved it!

Same, same, but different
I have the same issue only the caracters are the swedish åå
Any idea on how to fix this?

In the same way!

ghale said:
In the same way!
Click to expand...
Click to collapse
It now works!

stdk said:
Hi people, try this:
in data.zip / config / keybind.txt / [default]
add :
x87="NOP"
xE5="NOP"
it works with R3 version
All the best
Click to expand...
Click to collapse
Excellent!! Now works flawlessly!

Power save
Is there a way to make power management run properly, caus' when the screen turn off, GPS doesn't load anything... and when i turn back the light on, iGO research my new position...

stdk said:
Hi people, try this:
in data.zip / config / keybind.txt / [default]
add :
x87="NOP"
xE5="NOP"
it works with R3 version
All the best
Click to expand...
Click to collapse
you r a genius!!!!! Thanx

thanks, works a dream

Try to keep the existing "SAVE" folder and go to the backlight configuration. Here put "Device configuration", or something similar. In mine worked perfectly.

stdk said:
Hi people, try this:
in data.zip / config / keybind.txt / [default]
add :
x87="NOP"
xE5="NOP"
it works with R3 version
All the best
Click to expand...
Click to collapse
fixed the stuck åå problem on HD2 iGO8 perfectly.
Thanks a mil!

stuck åå problem on HD2 iGO8 perfectly
Yes.. took the words out of my mouth... friggin awsome dude..
fixed the stuck åå problem on HD2 iGO8 perfectly
Click to expand...
Click to collapse

I have done Yunabeco's method and works for me...
havent tried stdk's method but it looks more clever as it probably disables that font, that has these weird characters or something, from loading
i might do this next time..

Works 100%
Perfect
Think-you
Kindly yours

stdk Thank you.
I think you deserve a medal!!!!!
I can't quite believe I don't have to muck around with the power settings anymore. I feel like my HD2 is a new, better machine!

[SOLVED] EzInput - removing arrows

Hi,
I was searching on the forum for a description how to remove arrows from ExInput keyboard, but I can't find. I know there is some way to that
Thanks in advance!

+1 for this.

Edit all *.xml in IME_EzInput package (for exp: 0A09.xml) and replace h="329" to h="269".
Code:
<?xml version="1.0"?>
<Layout id="0A09" icon="P12.bmp" img="P12_Bg.png" inv_img="P12_Bg_Inv.png" w="480" [COLOR="Red"]h="329"[/COLOR] font_ht="32" font_wt="900" ...
...

Cloudyfa said:
Edit all *.xml in IME_EzInput package (for exp: 0A09.xml) and replace h="329" to h="269".
Code:
<?xml version="1.0"?>
<Layout id="0A09" icon="P12.bmp" img="P12_Bg.png" inv_img="P12_Bg_Inv.png" w="480" [COLOR="Red"]h="329"[/COLOR] font_ht="32" font_wt="900" ...
...
Click to expand...
Click to collapse
Thanks mate, that solved my issue
Although for others: I had 347 at first so to make 60 difference I changed to 287
Cheers.

Another SOLVED case, thanks to Cloudyfa.
Lechux said:
Thanks mate, that solved my issue
Although for others: I had 347 at first so to make 60 difference I changed to 287
Cheers.
Click to expand...
Click to collapse

Cloudyfa said:
Edit all *.xml in IME_EzInput package (for exp: 0A09.xml) and replace h="329" to h="269".
Code:
<?xml version="1.0"?>
<Layout id="0A09" icon="P12.bmp" img="P12_Bg.png" inv_img="P12_Bg_Inv.png" w="480" [COLOR="Red"]h="329"[/COLOR] font_ht="32" font_wt="900" ...
...
Click to expand...
Click to collapse
Hmmmm looks like you got answers for everything! lol

So, maybe I should how to make a rom that RAM usage is at 10% level and 500Mhz processor run like 1Ghz

Hmm, I tried this, copied the files into the windows folder and it didn't work... Does it have to be cooked in?

yeah im having the same problem...cooked only?

[Problem]CHT Editor 1.8 give error with configuration personnel

Hello to all
when i cook cht hometab and cht editor as a external packages with the original settings its works but when we add our configuration personnel(by export regedit) in app.reg after coking cht editor gives a error like "A unexpected error has occurred"...i did the samething with 1.7.1 it worked well but 1.8.0 not work....Are i miss some default reg entries un 1.8.0...
is there Any solution....

shafizal said:
Hello to all
when i cook cht hometab and cht editor as a external packages with the original settings its works but when we add our configuration personnel(by export regedit) in app.reg after coking cht editor gives a error like "A unexpected error has occurred"...i did the samething with 1.7.1 it worked well but 1.8.0 not work....Are i miss some default reg entries un 1.8.0...
is there Any solution....
Click to expand...
Click to collapse
Shafizal,
Look @
[HKEY_LOCAL_MACHINE\Software\HTC\Manila\Co0kie\HomeLevel0]
"zLayout.NotFirstRun"=dword:00000001
An this for all levels (0, 1, 2 and 3)

Steve0007 said:
Shafizal,
Look @
[HKEY_LOCAL_MACHINE\Software\HTC\Manila\Co0kie\HomeLevel0]
"zLayout.NotFirstRun"=dword:00000001
An this for all levels (0, 1, 2 and 3)
Click to expand...
Click to collapse
thanks steve but still same problem

IDK if you already found the answer to this but someone else already talked about this, and also provide the EXT files and shows what to change on the Ervius Kitchen, Ill provide the link as soon as I find it

In case you havent found the answer look at this post#2 & 3
http://forum.xda-developers.com/showthread.php?t=697324

[PRoblem] Cooked ROM always launch with titanium after flash

Hello to all
i havé cooked a ROM with rhodium s2 as base but after flash m'y ROM always starts with titanium and i want to m'y ROM starts with touchflo
i havé checked m'y reg Chome =enabled to 0 but after flash always it starts with titanium
is there any solution for thé ROM launch with touchflo not with titanium
thanks to all

this depends on order of your registry files.
for example - in TouchFlo package you disabled Titanium,
but in CHome_Lang_0409 29d83cd1-abf5-4903-8b3d-47ea40bc5688.rgu it's enabled.
if CHome_Lang_0409 will be processed after TouchFlo in your kitchen - Titanium will be enabled.
I use OsBuilder kitchen and to fix this I edited packages.cif and packages.sof - my original ROM was WM6.1 and there was no CHome packages in these files.
Hope, this will helpful for you =)

Create a zzzz_personal EXT (or whichever runs last in your kitchen) which should run last based on the zzzzz_ and enable touchflo and disable Titanium there.
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Today\Items\"Windows Default"]
"Enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\Microsoft\Today\Items\TouchFLO]
"Enabled"=dword:00000001

Thanks for ur reply's Will try this.....

NilsP said:
Create a zzzz_personal EXT (or whichever runs last in your kitchen) which should run last based on the zzzzz_ and enable touchflo and disable Titanium there.
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Today\Items\"Windows Default"]
"Enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\Microsoft\Today\Items\TouchFLO]
"Enabled"=dword:00000001
Click to expand...
Click to collapse
Tried this by making mxip_zzzztweaks.provxml but not working....

shafizal said:
Tried this by making mxip_zzzztweaks.provxml but not working....
Click to expand...
Click to collapse
@shafizal
I assume you are cooking with Sense 2016 from LEO S 3.04 TW?
Check manila core package app.reg (both in package root and Lang_ID folder). If there are any characters other than the language you want, just replace that app.reg from LEO S 3.02 (assuming you are cooking WWE).
I had the same prob and that solved mine. Hope it works for you too!

tidus18 said:
@shafizal
I assume you are cooking with Sense 2016 from LEO S 3.04 TW?
Check manila core package app.reg (both in package root and Lang_ID folder). If there are any characters other than the language you want, just replace that app.reg from LEO S 3.02 (assuming you are cooking WWE).
I had the same prob and that solved mine. Hope it works for you too!
Click to expand...
Click to collapse
thanks yes it is in other language i have changed to like this but still have problem
[HKEY_LOCAL_MACHINE\Software\Microsoft\CHome]
"Enabled"=dword:0
[HKEY_LOCAL_MACHINE\Software\Microsoft\Today\Items\"Windows Default"]
"Enabled"=dword:0

shafizal said:
thanks yes it is in other language i have changed to like this but still have problem
Click to expand...
Click to collapse
shafizal,
See the code below. Anyway, I've attached my app.reg from manila core (Manila Core v2.5.20161332.0) package (WWE) for your use. Good luck!
Code:
REGEDIT4
[HKEY_CURRENT_USER\Software\HTC\Manila]
"DisplayNameInTodaySetting"="HTC Sense"
"DisableLockRegNotify"=dword:1
"DisableEndKeyFilter"=dword:1
"ListViewHeight72"=dword:1
"EnableHomeKeyFilter"=dword:1
"Skip1stBooting"=dword:0
"DevResolution"="WVGA"
"ProjectCode"="LEO"
[HKEY_LOCAL_MACHINE\Software\Microsoft\Today\Items\HTC Sense]
"DLL"="ManilaToday.dll"
"Order"=dword:0
"Selectability"=dword:2
"Type"=dword:4
"Enabled"=dword:1
[HKEY_LOCAL_MACHINE\Software\HTC\Manila]
"BinaryM9"=dword:1
"TextureCompress"=dword:1
"HashPaths"=dword:1
"Version"="2.5.20161332.0"
"Style"="White"
"HTCScroll.Enable"=dword:1
[HKEY_LOCAL_MACHINE\Software\HTC\Manila\Update]
"RomID"="1000"
[HKEY_LOCAL_MACHINE\Software\HTC\VolumeOverlay\InhouseAPClass\Manila]
"ClassName"="Manila"
[HKEY_LOCAL_MACHINE\Software\HTC\VolumeOverlay\InhouseEnable2ndUI\Manila]
"Enable2ndOverlay"=dword:0
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\MASD]
"Manila_Core"="2_5_20161332_0"
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PKG]
"shadow"="1"

shafizal said:
Tried this by making mxip_zzzztweaks.provxml but not working....
Click to expand...
Click to collapse
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Today\Items\"Windows Default"]
"Enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\Microsoft\Today\Items\TouchFLO]
"Enabled"=dword:00000001
Anyway, i hope you didnt do the mistake of directly copying the reg entries above and naming the file as mxip_zzzztweaks.provxml.
before cooking your own provxmls, always try loading it into internet explorer or XML Notepad 2007 (my favorite and its free!)

tidus18 said:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Today\Items\"Windows Default"]
"Enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\Microsoft\Today\Items\TouchFLO]
"Enabled"=dword:00000001
Anyway, i hope you didnt do the mistake of directly copying the reg entries above and naming the file as mxip_zzzztweaks.provxml.
before cooking your own provxmls, always try loading it into internet explorer or XML Notepad 2007 (my favorite and its free!)
Click to expand...
Click to collapse
no i have created with reg to xml tool....i dont know if its launched i have put my provxml in my operator packages...

tidus18 said:
shafizal,
See the code below. Anyway, I've attached my app.reg from manila core (Manila Core v2.5.20161332.0) package (WWE) for your use. Good luck!
Code:
REGEDIT4
[HKEY_CURRENT_USER\Software\HTC\Manila]
"DisplayNameInTodaySetting"="HTC Sense"
"DisableLockRegNotify"=dword:1
"DisableEndKeyFilter"=dword:1
"ListViewHeight72"=dword:1
"EnableHomeKeyFilter"=dword:1
"Skip1stBooting"=dword:0
"DevResolution"="WVGA"
"ProjectCode"="LEO"
[HKEY_LOCAL_MACHINE\Software\Microsoft\Today\Items\HTC Sense]
"DLL"="ManilaToday.dll"
"Order"=dword:0
"Selectability"=dword:2
"Type"=dword:4
"Enabled"=dword:1
[HKEY_LOCAL_MACHINE\Software\HTC\Manila]
"BinaryM9"=dword:1
"TextureCompress"=dword:1
"HashPaths"=dword:1
"Version"="2.5.20161332.0"
"Style"="White"
"HTCScroll.Enable"=dword:1
[HKEY_LOCAL_MACHINE\Software\HTC\Manila\Update]
"RomID"="1000"
[HKEY_LOCAL_MACHINE\Software\HTC\VolumeOverlay\InhouseAPClass\Manila]
"ClassName"="Manila"
[HKEY_LOCAL_MACHINE\Software\HTC\VolumeOverlay\InhouseEnable2ndUI\Manila]
"Enable2ndOverlay"=dword:0
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\MASD]
"Manila_Core"="2_5_20161332_0"
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PKG]
"shadow"="1"
Click to expand...
Click to collapse
i have the same reg entries....thanks for the app.reg

Obviously you have another rgu, app.reg or provxml overwriting the one you changed.

may be i have to create my provxml like this no????
mxipupdate.zzztweaks.provxml
before i have created like this mxip.zzztweaks.provxml

shafizal said:
may be i have to create my provxml like this no????
mxipupdate.zzztweaks.provxml
before i have created like this mxip.zzztweaks.provxml
Click to expand...
Click to collapse
i think maybe you might need the first underscore mxip_*.provxml. Im not so sure, but i always follow the recommendation for my custom tweaks here:
http://msdn.microsoft.com/en-us/library/ms889522.aspx

[SOLVED] Patching device date and time

Hi friends,
I have another weird problem and I wonder if anyone has experience with this.
On my hd2 to enable the extra mem everybody knows you need to take a nk.exe from t-mous rom.
What I've also been reading is if you like to patch date and time on the device (the date and time you set during first device setup) you need to patch s000 in nk.exe.
I've been digging with a hex editor in s000 (up and down ) but the date that popsup on the device isn't the date that I find in s000.
I've also looked in nk.exe (a dump I have on the side) that original comes with the oemdrivers and there I did find the correct date (the date that pospup on the device).
So I think that means the patch for date and time isn't in s000 of nk.exe but must be in oemdrivers or maybe in another part of XIP?
It's also not in os.nb as that has the same date as s000, so I wonder where I could look else?
Anyone has an idea or can give me a suggestion?
Grtz,
Laurentius26

I also would like to know this Thanks!

Just use the new Ervius Kitchen (supports the new NK from 3.14 ROMs) to change the date of ur ROM, i.e patch it!
Too much HEX editing is not good ;-)
WBR
Siemens Lover

Believe me I've tried, and it didn't work.
The date I'm searching for is not present in NK.EXE s000
I've changed all 2010 values with 2011 in s000 (digging up and down), and still the device bootsup with 2010.
SiemensLover said:
Just use the new Ervius Kitchen (supports the new NK from 3.14 ROMs) to change the date of ur ROM, i.e patch it!
Too much HEX editing is not good ;-)
WBR
Siemens Lover
Click to expand...
Click to collapse

I don't know how it's with HD2, but on most devices date is stored like this:
HEX code:
Code:
DB07 0300 0400 0300 0C00
DB07 - 2011 (year) - 2010 (DA07)
0300 - March (month)
0400 - Thursday (day of the week)
0300 - 3rd (day)
0C00 - 12 PM (time)
So on device with this example you will see 3rd March 2011 - 12 PM

Here's my NK.EXE.
Maybe somebody likes to look at it?
I'm searching for the date 20 october 2010 in it, as that's what it shows if my device boots.
It's not present or I am terrible mistaking.
Thank you.

@Spiaatie,
Thanks for the tip my friend but I think I need to patch date somewhere else as nk.exe.

I was able to patch nk.exe with ervius kitchen xipporterex.
but the date still didn't change after I cooked the rom with the patched nk.exe.
So it's deffinitly somewhere else.

Are you trying to change the date in device info-->software info?

If wanting to add date to ROM, unsure of time...but date can be set in OEMVersion RGU by adding to yours like this....Not sure if this helps....
REGEDIT4
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM]
"ROMVersion"="2.10.502.4 (93577)"
"ROMDate"="02/09/11"
WC

Hi mate,
That's not what I'm trying.
I'm trying to change the date that popsup during device setup.
ai6908 said:
Are you trying to change the date in device info-->software info?
Click to expand...
Click to collapse
Thank you WC, yes I know about that but that's not what I'm looking for.
Wild Child said:
If wanting to add date to ROM, unsure of time...but date can be set in OEMVersion RGU by adding to yours like this....Not sure if this helps....
REGEDIT4
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM]
"ROMVersion"="2.10.502.4 (93577)"
"ROMDate"="02/09/11"
WC
Click to expand...
Click to collapse

If we modify the nk.exe with xipportex it only changes the value in Device Info -> Software -> ROM date. But we want to change the default time what is on the first start (welcome screens). I havent found any solution yet
EDIT:
Ok I've found the solution: we have to hex edit the date in msm_time.dll's S000 file in XIP (it looks like this: Aug 29 2010) . Default date on welcome screen is succesfully changed

Shady313 said:
If we modify the nk.exe with xipportex it only changes the value in Device Info -> Software -> ROM date. But we want to change the default time what is on the first start (welcome screens). I havent found any solution yet
EDIT:
Ok I've found the solution: we have to hex edit the date in msm_time.dll's S000 file in XIP (it looks like this: Aug 29 2010) . Default date on welcome screen is succesfully changed
Click to expand...
Click to collapse
I'm in the same boat now and thanks for the solution. Its exactly correct.
I though, the ROM date is present in nk.exe but it isn't. Its in msm_time.dll, atleast in HD2's
Thanks again...
Best Regards

That's a great find mate, thank you very much.
Shady313 said:
If we modify the nk.exe with xipportex it only changes the value in Device Info -> Software -> ROM date. But we want to change the default time what is on the first start (welcome screens). I havent found any solution yet
EDIT:
Ok I've found the solution: we have to hex edit the date in msm_time.dll's S000 file in XIP (it looks like this: Aug 29 2010) . Default date on welcome screen is succesfully changed
Click to expand...
Click to collapse