Related
I have the wifi only model of the Xoom and have noticed that my wifi speeds decrease if the unit is left on for a couple of hours. It will only get back to full speed after rebooting. For instance, after bootup I can get up to 20mbps. After an hour or so, I'll drop to 3-5mpbs max. I tried not running anything after bootup except for the speedtest.net app and get the same behavior. Just wondering if anyone else is having this issue. I am running Honeycomb 3.2. I have searched on this forum but no one is having any similar issues, just wifi dropouts. I don't have that problem. The only services running at the time of bootup are Music, Thumbkeyboard, Minimalistic text, Maps and Google Services.
Your router will affect that. I had that issue until I bought a real high speed router. Also check your router settings for the through put speeds. You can set that to 54mb or higher and change to channel 11. See if that helps.
Sent from my ADR6400L using xda premium
I have the D-link DGL4300 router. That's a high end router. But I'll try setting it to Channel 11 to see if that helps. I have the same issues using the wireless at work as I do at home. Hopefully this change helps.
Changing the channel would only improve speed if the channel you are currently using is crowded. Channel is merely frequency. As for slowing, it is probably your routers qos.
Sent from my Xoom using xda premium
Yeah that doesn't work. How do I change my qos?
Sent from my Xoom using Tapatalk
I highly suggest setting up a static IP address if you know how to do so. A static IP is a more direct connection to the device. In other words: Auto settings will do everything by itself to the best of its ability, meanwhile a static IP says that it will go right here to this specific device right now. Thus, you will have a more solid connection to the device with an internet connection.
Setting up a static IP address is really easy, you just have to know a little bit about your router, and know how to work with setting up custom IP addresses. Once you learn it, you would apply that to all of your internet enabled devices, not just the Xoom.
I have all of my devices set up this way, Xoom included. It runs smooth as butter like always.
Setting a Static IP Address in Windows 7
This website has some basic knowledge, although it is for Windows 7. The same rules apply to any other device as well. You'll have to check your wireless router settings and see what devices are connecting to it, and what their IP addresses are. Once you know that... it should be pretty easy to get things rolling. The other basics like subnet mask, and default router are explained in the website.
diablo2224 said:
I highly suggest setting up a static IP address if you know how to do so. A static IP is a more direct connection to the device. In other words: Auto settings will do everything by itself to the best of its ability, meanwhile a static IP says that it will go right here to this specific device right now. Thus, you will have a more solid connection to the device with an internet connection.
Setting up a static IP address is really easy, you just have to know a little bit about your router, and know how to work with setting up custom IP addresses. Once you learn it, you would apply that to all of your internet enabled devices, not just the Xoom.
I have all of my devices set up this way, Xoom included. It runs smooth as butter like always.
Click to expand...
Click to collapse
This is great advice for when the AP you're connecting to has trouble negotiating DHCP, but it seems to me the OP is talking about link speed.
OP: there's a memory leak in some versions of the wifi driver that can cause the symptoms you're seeing. I've seen it a few times even in 3.2, but toggling wifi usually cures it.
I bought a 300mb netgear and it fixed my issue at home. At work is a diff story. Max speed on those routers is 54mb and it pauses all the time. Seems to me the xoom was designed for speed and the cheaper routers can't keep up with the data.
Sent from my ADR6400L using xda premium
your problem might be cache full as it is ok after reboot. try installing a cache cleaner ng apk from market. it can schedule a auto cache clear daily.
Send from my Xoom MZ601 using XDA app
Ok. I think the problem that was sucking down my wifi speeds was a god damn live wallpaper. I downloaded the one called Shadow Galaxy from the market. After I rebooted yesterday, I had changed the wallpaper to a plain one. It's been about 20 hours so far since my last reboot and I'm still getting 15 to 20mbps! I'll keep you guys posted.
ZanshinG1 said:
This is great advice for when the AP you're connecting to has trouble negotiating DHCP, but it seems to me the OP is talking about link speed.
OP: there's a memory leak in some versions of the wifi driver that can cause the symptoms you're seeing. I've seen it a few times even in 3.2, but toggling wifi usually cures it.
Click to expand...
Click to collapse
I kinda figured as much, but y'all seemed to have this down already. Figured I would offer up some useful info to make a more solid internet connection.
If none of the other options helped, in your routers settings (generally 192.168.0.1), probably advanced then quality of service, you can probably turn on or off the native qos, or make an exception. I'm not sure, Im not familiar with d-link software...
Sent from my Xoom using xda premium
Im having the same problem with my Xoom (3.2), after been conected some time to a wifi speed decreased a lot! What i do is turn off then turn it on again, that fixes it
It there a fit for that?
My live wallpaper was the cause of my issue do you have 1 running
Sent from my Xoom using Tapatalk
CyberChulo said:
My live wallpaper was the cause of my issue do you have 1 running
Sent from my Xoom using Tapatalk
Click to expand...
Click to collapse
wouldnt this only be the cause if the live wallpaper connects to the internet... i have one which just uses photos from my sd card... maybe we could try restricting its access to the internet and maybe that will have an affect? I dont know how to restrict internet access though
Just switch it to a stock wallpaper for now and see if that works.
im not using live wallpaper, just an stock one.
I just did the process to restore full speed again, this is happening in all placess i go, at least once at day, i think is a honeycomb (3.2) problem, not just a live wallpaper :-S
Usa anyone else experiencing wifi collection issues.
Wireless N simply doesn't work. On G and B I get connected but 90% of the time I'm connected with no internet access. I use g band then b band and get no data. Turn off wifi and my 2 bars of 3g works ok. Turn back on wifi it connects and nothing can access data.
Sent from my SPH-D700 using XDA App
I've changed my network name and wpa code several times. I even added a network with wep security and no difference. I tried hidden ssd and no difference.
Used to work fine. I guess logic tells me it must be EH06 modem since this problem started with in the last couple weeks.
Sent from my SPH-D700 using XDA App
I have to use static ip to get on my Netgear N router. Put in all the info including a DNS server.
Sent from my SPH-D700 using XDA App
How many devices connect to your router? By the way, what security do you use on your router? Get rid of your router throwing B signal, its ancient history. I connect to N/G/B no prob.
Edit:
P.S. Does anyone else tinker with your Router besides you? Did you recently turn Mac Filtering on? Do you run software such as Cisco Network Solutions? It could 'block' out 'intruders' from connecting when in reality its just your phone. Lol
I.have a new n router, dual chain or whatever n is in the 500mghtz band. I have seven devices connected. I use wpa security.
Sent from my SPH-D700 using XDA App
I does have a firewall on and off (vizio router). Firewall doesn't seem to make a difference. It can and currently is setup to broadcast three separate networks. 500Mhz for n good for tv's, one I choose for g only (can do auto which is n g and b), one for older devices b band only. Phone has no data with any of the three networks. But connects to to all three.
Sent from my SPH-D700 using XDA App
troyolson92 said:
I.have a new n router, dual chain or whatever n is in the 500mghtz band. I have seven devices connected. I use wpa security.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
AFAIK, our Epics only connect on 2.4Ghz on wireless N. I don't think it is capable of connecting on 5Ghz...but don't quote me on that, I may be wrong.
I've connected to a 5Ghz router before, did have issues keeping a stable connection even though it was set to auto B/G/N
I don't know if you mind, but why not try throwing out 2.4Ghz frequency? Make sure your channel is 1-11. I remember the Epic not being able to connect with Data if the channel was persay, 21.
I'd get rid of the B signal, an old laptop or a PSP are the only two devices that come to mind when I think of a device that only takes B signal.. lmao.
Good point, I think the auto channel thing puts it up past 11...
I will report back. thanks for the help everyone, I do appreciate any feedback.
Sent from my SPH-D700 using XDA App
Ok. Changes channel from auto to 11 and that seemed to do the trick. Now working on G. Tomorrow I'll try N.
Thanks for y'all's help!
Sent from my SPH-D700 using XDA App
My question is why overnight my wifi shuts off sometimes on the Epic, even when I have "never sleep" selected in advanced settings? Running rooted stock Froyo EC05.
DroidApprentice said:
My question is why overnight my wifi shuts off sometimes on the Epic, even when I have "never sleep" selected in advanced settings? Running rooted stock Froyo EC05.
Click to expand...
Click to collapse
Simple my friend, not enough RAM to allow it to stay connected, so by default, the epic's Adminstrative commands terminate it in order to free up resources. Thus trying to save you battery etc. If you free up resources, like clear ram, (level 1&2) you'll notice you can connect right back as soon as you do that. The more you run at once, or even background processes eat up your ram. Some common that come to mind: Google+, Live Wallpaper, weather/clock widgets, to name a few.
Shinydude100 said:
Simple my friend, not enough RAM to allow it to stay connected, so by default, the epic's Adminstrative commands terminate it in order to free up resources. Thus trying to save you battery etc. If you free up resources, like clear ram, (level 1&2) you'll notice you can connect right back as soon as you do that. The more you run at once, or even background processes eat up your ram. Some common that come to mind: Google+, Live Wallpaper, weather/clock widgets, to name a few.
Click to expand...
Click to collapse
Thanks for the explanation...but I find it weird that it's always overnight, and not when I have lots of apps going during normal use. Shouldn't there be much more RAM free when nothing's hapenning in the foreground? It's not every night either, only some.
I live very close to a hotel which has multiple SSID's that keep interfering with my ability to stay connected to my router.
I've tried hard coding a static ip on the phone, adding the mac address to router, even went as far as creating a separate unhidden network just for the phone. So far, nothing has worked.
So i was thinking that maybe there's a way to have the phone ignore certain signals, lock on to a preferred one or use WiFi but turn off the scanning feature. The only problem is that I haven't been able to find any settings or Apps that will allow me to do it.
So, if anyone has any ideas or suggestions as how, or if, I can make this work, I would greatly appreciate it.
I'm using a Droid 2 Rooted with 2.3.3 and have a Netgear N750 router.
BTW - none of the computers in the house are having this issue.
Sent from my DROID2 using XDA App
So, are you saying the phone constantly tries to leave your home wifi in favor of attempting to connect to the hotel's?
Yes, unless I'm within about 5 feet of my router, the hotel's signal makes the phone keep dropping and reconnecting over and over again.
Sent from my DROID2 using XDA App
Are the hotel's hotspots not WEP secured? That is so odd. If they're unsecured hotspots go over to the hotel and tell them to get their sh*t in order. Otherwise I'm out of ideas, sorry.
No, they are secure. WPA2 as is mine. I don't connect to them. My phone just detects them, drops my connection and tries to connect to them. So that leaves me with no connection and having to use 3G.
But there may be an easier solution to this. After spending a few hours on the Netgear site, it turns out that there is a bug in their firmware that causes signal strength fluctuations. They said a new release should be available in a few weeks.
In the meantime I've changed the channel on the router to auto select which seems to be helping.
I do appreciate you taking the time to assist.
Thanks!
Scott
Sent from my DROID2 using XDA App
Glad there's at least some kind of work around, wish I was of more assistance.
Having a similar problem with a samsung galaxy sii - current internet configuration is through AT&T U-Verse with built in Wireless G router in there Gateway. tried adding a Netgear dual band N router to my network and with the netgear's 2 wifi signals on then my phone just constantly goes into scanning mode and keeps trying to connect between the 3 - things work fine with the wifi turned off in the new netgear kind of defeating the purpose of me installing it - was hoping to have the phone use one of the N signals..
Block bt openzone connection pleaseee!
Desperately need an app for this? Is it not going to be possible for a way to block certain wifi signals because I'm actually going to rip next doors BT openzone router out of the wall and get a hammer to it! My HTC desire hd is insistent on connecting to its poor signal over our excellent one and the worst part is that you can't actually access the network unless you pay BT for a user account! Grrrr.... Please help
Try to connect the network you dont want, then go to wifi management in settings. Long press on the network you dont want and hit forget network. Then your phone shouldnt automatically connect to it unless you tell it to.
This is driving me insane!
When I have WiFi enabled at the office, my Samsung Galaxy Note (stock ICS, rooted) constantly receives incoming data and I haven't got a clue which setting, app or service is causing this.
SystemPanel registers a nonstop stream of incoming traffic at 8 to 10 Kbps.
TrafficStats shows an accumulation of Received data under Total WiFi, but can't seem to link it a particular app or service: after resetting the data, no processes appear but the incoming data keeps on growing.
All sync options are off, I've tried to kill every running app or service (one by one, all at once), I've tried to block all traffic using Droidwall. As soon as WiFi is enabled, the incoming stream is unstoppable. When switching to 3G, there's no incoming traffic.
But to make matters even more mysterious, I do not have this problem with my WiFi connection at home.
It only occurs at the office, only on WiFi and (as far as I know) only on my phone.
Any ideas?
This is simply because your wifi antenna still "hears" the data going trough the wireless network on wich you are connecter. Event if your phone doesn't asks for any data at the moment the traffic there is on the network will still be counted by the wifi chip on your phone.
It will be the same on any public network or if you have another phone or a computer connecter on the same wireless router and generating traffic.
Thanks for replying, John!
That sounds very plausible, but then I still have to figure out why only my phone is registering this traffic - maybe it's an ICS thing or brand specific?
And I'll try to 'reproduce' it at home by connecting a laptop at the same time.
I think that the above is correct. That may be default behavior.
Sent from my XT862 using xda app-developers app
Well, I've tried to connect several devices at once on my home WiFi network, but it did not reproduce the incoming traffic problem I experience at work.
There were a few incoming bytes registered, not nearly as much as the constant stream of 10 Kbps at the office network...
Your works wifi may be set up like that. Who Knows?
Sent from my XT862 using xda app-developers app
MrObvious said:
Your works wifi may be set up like that. Who Knows?
Click to expand...
Click to collapse
Well, our it-department certainly does not.
You're probably right that this is normal behavior. I'll just have to figure out which drains less battery under these circumstances, WiFi or 3G. Thanks anyway for replying.
I'm on the mobile app, but if you have GSM then just switch to 2g until you use it.
Sent from my xt862 using xda app-developers app
Djezpur said:
Well, I've tried to connect several devices at once on my home WiFi network, but it did not reproduce the incoming traffic problem I experience at work.
There were a few incoming bytes registered, not nearly as much as the constant stream of 10 Kbps at the office network...
Click to expand...
Click to collapse
About this, it is simply that at your office there is traffic on the network (download/upload) while at home simply having devices connected doesn't generate traffic or almost none. Start several dl on several devices (phone laptop) (guess 2-3 is enough, maybe even one but not sure, not en expert after all ) then you should notice signifficant traffic on your phone, I guess!
So interesting I find this thread because I have the exact same problem!!!!
How I noticed it...when I am at home I drop 1% battery on Wifi per hour. 10hours = 10% (sometimes less).
I go to work on the Wifi, I DONT USE ANYTHING ON THE PHONE and the battery is DRAINING LIKE CRAZY!!! 5%/h or more!!!
( I am in airplane mode in both place)
So I was thinking, WTF with this work wifi, i am not doing anything at all on it. Then I look at my wifi icon I have a constant RECEIVE icon. And I bet my phone does not go to sleep or something.
So why in the world my work wifi is draining my battery and the one at home is not. I will check tonight but I dont think I have traffic like this. I am registering 5-6kbytes/s for nothing. The explanation given above is hands-waving. I do not agree with it fully. YEs sure there are several pings and beacon emitted back and forth but i do not think it is enough to cause 5-6kbytes/sec . The wifi is not in Monitor mode and it only receives the packets destined to my phone.
This is madness!!!! BTW When I had a different kernel on back on ICS this behavior stopped. I will try to monitor again.
kalinusa said:
So interesting I find this thread because I have the exact same problem!!!!
(...)
This is madness!!!! BTW When I had a different kernel on back on ICS this behavior stopped. I will try to monitor again.
Click to expand...
Click to collapse
Hey kalinusa, did you find a solution to this problem?
I'm currently on the SpeedMod kernel, but that does not seem to make a difference to the 'office WiFi behavior' (so I keep my phone on mobile data).
I don't want to speak out of my ass, because I haven't a clue how the app works.
As far as I can guess SSH tunnel may help you. I would hope someone else could tell me I'm right, but I'm probably wrong.
I have had this same problem with two of my devices. The first is a Samsung Captivate with the last AOKP ICS build. The second is a Google Nexus 7 with AOKP's first Jelly Bean build (it happened when I had stock as well).
This only happens when I'm connected to WiFi at my university. The down arrow on the WiFi icon is ALWAYS on and it drains the battery. At home, I don't have these problems.
I emailed my university's IT department but I'm not sure if there's anything they can do. Anyone have any suggestions? Thanks.
I have exactly the same problem, but I think I found the reason which is causing it. I think that some of the routers are capable of the multicast over the wifi and then we can get a constant wifi traffic. I tested it at home, where I have enabled multicast over wifi and my phone wifi receiving the data all the time, even if it is in sleep. Now I'm in the office where we do not have such capable router with multicast over wifi and my phone wifi behavior is as expected. When I will be at home I will test it again with my router and with disabled multicast over wifi and hopefully it will solve this issue.
danielo said:
I have exactly the same problem, but I think I found the reason which is causing it. I think that some of the routers are capable of the multicast over the wifi and then we can get a constant wifi traffic. I tested it at home, where I have enabled multicast over wifi and my phone wifi receiving the data all the time, even if it is in sleep. Now I'm in the office where we do not have such capable router with multicast over wifi and my phone wifi behavior is as expected. When I will be at home I will test it again with my router and with disabled multicast over wifi and hopefully it will solve this issue.
Click to expand...
Click to collapse
More than multicasts it could be broadcasts, what are you reaceiving. For example if you don't use WINS server in Windows domain, all computers use broadcast to get IP address for a computer name (if you dont use DNS name, but that's another story). At home, where aren't many computers, there are very few broadcasts. But somewhere, where a large amount of computers is on the same network (not splitted to broadcast domais), number of broadcasts would dramatically increase
btw. if you connect a PC to the same network as your phone and stop ALL running applications (mainly instant messangers, web browsers, e-mail clients) you should see the same network bandwidth in use as on your cell phone.
More than multicasts it could be broadcasts, what are you reaceiving. For example if you don't use WINS server in Windows domain, all computers use broadcast to get IP address for a computer name (if you dont use DNS name, but that's another story). At home, where aren't many computers, there are very few broadcasts. But somewhere, where a large amount of computers is on the same network (not splitted to broadcast domais), number of broadcasts would dramatically increase
Click to expand...
Click to collapse
Interesting. Roughly how many devices would need to be on the same network, to see that kind of traffic load?
-- Sent from my TouchPad using Communities
post-mortem said:
Interesting. Roughly how many devices would need to be on the same network, to see that kind of traffic load?
-- Sent from my TouchPad using Communities
Click to expand...
Click to collapse
It depends on what you consier as network load. If you start a network monitor like Wireshark or MS Network monitor and even if there is one computer on the network, you wil see "some" traffic (from time to time a few network packets). To generate constant network load, you'll need a few dozens of computers. And it always depends on how the network is designed and what applications the computers run. If all computers connect to a server, the network load will be a lot lower than if the computers share resources among them.
Or you can design your network in such way, that you divide computers into segments, where computers can communicate only with computers in its segment (or with some distant servers). This way the network load will dramatically decrease, as computers from different segments would not interfere.
I currently only have one computer connected to my home network atm via wifi, and it keeps a constant broadcast going to my phone for some unknown reason. I thought it was my dlna server, so I shut that off, and it is still broadcasting _something_... Its causing quite a battery drain, and unfortunately I cant seem to find the root of the issue. I've trolled through my router settings -- multicasting isnt on -- so Im at a loss. =\
Spz0 said:
I currently only have one computer connected to my home network atm via wifi, and it keeps a constant broadcast going to my phone for some unknown reason. I thought it was my dlna server, so I shut that off, and it is still broadcasting _something_... Its causing quite a battery drain, and unfortunately I cant seem to find the root of the issue. I've trolled through my router settings -- multicasting isnt on -- so Im at a loss. =\
Click to expand...
Click to collapse
It can be caused also with the Media servers which runs on PC, also DHCP etc. It is not easy to eliminate all broadcast traffic and sadly our phones react at all that multicast packets.
Hey guys,
My nexus 10 had a gray Wi-Fi bar and is failing to connect any of the Google services such as play store, search app, or gmail. Basically GAPPS. I cannot find a solution to this besides factory resetting, can someone help? My tablet is on stock rooted.
Thanks!
add12364
My N10 either has a grey WiFi bar or it disconnects completely. This happens very often and occurs no matter what rom I have, even stock. I've always felt that the WiFi has always had issues but never got resolved. I've looked around for solutions but not found any. Much appreciated if someone explained or had a solution.
Sent from my Nexus 10 using Tapatalk HD
I completely cannot use Google play, someone please help.
Toggle the Wifi off and then back on a few seconds later.
If this doesnt fix anything then you need to modify your router settings to be compatible.
Don't use 5g on router.
Sent from my Nexus 10
5GHz networks work fine on this tablet.
trickster2369 said:
Don't use 5g on router.
Sent from my Nexus 10
Click to expand...
Click to collapse
No offense meant, but that's a pretty silly claim. The transmission technology involved (2.4GHz/5GHz) or protocol (802.11a/b/g/n/ac) has no bearing on the color of the Wi-Fi indicator, which indicates just one thing: does a request to Google's secure servers work, or not? It's virtually always a problem with the network setup, be it with the ISP or the router blocking a port. OP should try using a public access point (coffee shop or something) or mobile hotspot to see if they're able to connect that way.
EniGmA1987 said:
5GHz networks work fine on this tablet.
Click to expand...
Click to collapse
My apologies. There was a lot of discussion concerning the use of 5ghz when the tablet was released. My comment was more of a suggestion than an absolute, and probably wasn't written the best.
Rirere said:
No offense meant, but that's a pretty silly claim. The transmission technology involved (2.4GHz/5GHz) or protocol (802.11a/b/g/n/ac) has no bearing on the color of the Wi-Fi indicator, which indicates just one thing: does a request to Google's secure servers work, or not? It's virtually always a problem with the network setup, be it with the ISP or the router blocking a port. OP should try using a public access point (coffee shop or something) or mobile hotspot to see if they're able to connect that way.
Click to expand...
Click to collapse
None taken. I was under the impression that grey/no bars, meant that there was no signal or there was a connection issue. I had no idea that the wifi state on the tablet had anything to do with Googles secure servers. I would like to learn more about that, if you would be so kind.
trickster2369 said:
None taken. I was under the impression that gray/no bars, meant that there was no signal or there was a connection issue. I had no idea that the wifi state on the tablet had anything to do with Googles secure servers. I would like to learn more about that, if you would be so kind.
Click to expand...
Click to collapse
The Wi-Fi state doesn't depend on the connection to Google's servers-- that's why it's quite possible to get full graybars. You'll also notice that if your Wi-Fi goes to sleep, when you wake up a (stock) Android device, you should basically always see it gray first, then turn blue after a second or so (speed depends on how good your connection is).
It's also not as simple as just going to google.com, because you can (usually) do that regardless of the status reported. That's because going to google.com only relies on basic HTTP/HTTPS web traffic through ports 80 and 443, which on most functioning networks are never going to be blocked (mostly because it would make even basic web browsing more or less impossible without workarounds). All of your "real" transactions with Google (Gmail sync, location reporting, etc.) happen through secured connections that run on different ports.
Some networks will block those ports for security reasons (the more ports you have open, the greater the network's functionality-- and its vulnerability to outside attack). In those situations, you'll see a gray bar indicating that while you've got connectivity, you won't be able to establish the connection to Google needed for some services to run (most importantly, any GCM/C2DM-based push notifications).
And no problem. Unfortunately, many OEMs muck around with the iconography, making this distinction meaningless on a pretty wide range of devices. It's annoying because this is one of the more common reasons that Google services don't work.
Rirere said:
The Wi-Fi state doesn't depend on the connection to Google's servers-- that's why it's quite possible to get full graybars. You'll also notice that if your Wi-Fi goes to sleep, when you wake up a (stock) Android device, you should basically always see it gray first, then turn blue after a second or so (speed depends on how good your connection is).
It's also not as simple as just going to google.com, because you can (usually) do that regardless of the status reported. That's because going to google.com only relies on basic HTTP/HTTPS web traffic through ports 80 and 443, which on most functioning networks are never going to be blocked (mostly because it would make even basic web browsing more or less impossible without workarounds). All of your "real" transactions with Google (Gmail sync, location reporting, etc.) happen through secured connections that run on different ports.
Some networks will block those ports for security reasons (the more ports you have open, the greater the network's functionality-- and its vulnerability to outside attack). In those situations, you'll see a gray bar indicating that while you've got connectivity, you won't be able to establish the connection to Google needed for some services to run (most importantly, any GCM/C2DM-based push notifications).
And no problem. Unfortunately, many OEMs muck around with the iconography, making this distinction meaningless on a pretty wide range of devices. It's annoying because this is one of the more common reasons that Google services don't work.
Click to expand...
Click to collapse
Would you happen to know if roms can affect wifi reception?
ikenvape said:
Would you happen to know if roms can affect wifi reception?
Click to expand...
Click to collapse
ROMs and kernels shouldn't affect reception in a technical sense (unless the kernel developer really messes up or something), but they will affect what your device can do with the signal it has. There are also various modes your device can follow that offer compromises (i.e. for CDMA devices, EVRC-B vs. EVRC-C -- one is better for normal usage, the other holds clearer calls with low signal).
Rirere said:
ROMs and kernels shouldn't affect reception in a technical sense (unless the kernel developer really messes up or something), but they will affect what your device can do with the signal it has. There are also various modes your device can follow that offer compromises (i.e. for CDMA devices, EVRC-B vs. EVRC-C -- one is better for normal usage, the other holds clearer calls with low signal).
Click to expand...
Click to collapse
Really appreciate the reply Rirere
I tried several lately. Since day one I have been receiving such poor reception. We have heavy wireless users here ranging from multiple game stations,phones tablets ,PC's etc. All have been receiving full strength except for the N10. From what your saying it seems like I have adjust the router for this one.
ikenvape said:
Really appreciate the reply Rirere
I tried several lately. Since day one I have been receiving such poor reception. We have heavy wireless users here ranging from multiple game stations,phones tablets ,PC's etc. All have been receiving full strength except for the N10. From what your saying it seems like I have adjust the router for this one.
Click to expand...
Click to collapse
Could you be a little more specific? Android has some nasty Wi-Fi issues (never have as many on my iOS devices), but the situation you describe doesn't sound like it helps. I'm the student manager at a college helpdesk, so we sometimes have this kind of problem in the dorms. If you give some more info about your setup, I might be able to at least point you in the right direction.
Things like what's the make and model of the router, where it's located, how close are neighbors, and so on. You can also use this app (https://play.google.com/store/apps/...SwxLDEsImNvbS5mYXJwcm9jLndpZmkuYW5hbHl6ZXIiXQ) to see if there's channel interference. If your router is new enough, you could also potentially kick it up to use 5GHz only (although that causes lower speeds the further you get much faster than auto 2.4GHz/5GHz).
Rirere said:
Could you be a little more specific? Android has some nasty Wi-Fi issues (never have as many on my iOS devices), but the situation you describe doesn't sound like it helps. I'm the student manager at a college helpdesk, so we sometimes have this kind of problem in the dorms. If you give some more info about your setup, I might be able to at least point you in the right direction.
Things like what's the make and model of the router, where it's located, how close are neighbors, and so on. You can also use this app (https://play.google.com/store/apps/...SwxLDEsImNvbS5mYXJwcm9jLndpZmkuYW5hbHl6ZXIiXQ) to see if there's channel interference. If your router is new enough, you could also potentially kick it up to use 5GHz only (although that causes lower speeds the further you get much faster than auto 2.4GHz/5GHz).
Click to expand...
Click to collapse
Your too kind Reiere Thank you,
I'm using a Media Link MWN-WAPR150N. I see, it doesn't support 5ghz which seems to be a total bummer. I could have sworn that I purchased a dual band model. It's a wonderful device as I'm not having to constantly power cycle it like in the past. We do catch a neighboring facility's wifi here on our devices so I believe this can be causing interference and it would be best to switch up to a 5ghz router? Definitely will check out the app. Thanks allot. I apologize for the ignorance in this area.
ikenvape said:
Your too kind Reiere Thank you,
I'm using a Media Link MWN-WAPR150N. I see, it doesn't support 5ghz which seems to be a total bummer. I could have sworn that I purchased a dual band model. It's a wonderful device as I'm not having to constantly power cycle it like in the past. We do catch a neighboring facility's wifi here on our devices so I believe this can be causing interference and it would be best to switch up to a 5ghz router? Definitely will check out the app. Thanks allot. I apologize for the ignorance in this area.
Click to expand...
Click to collapse
You're almost always going to get some degree of interference from other devices. How bad it is depends on the power of your neighbors' rig and its proximity. Other items, such as microwaves can cause temporary disruptions in wireless power, but it's much more unusual these days than it was in the past.
Given the way other devices in your network seem to be functioning alright, it might be a device-side issue. However, before that I would look into a Wi-Fi analyzing app like I posted earlier and try setting your network to a particular channel. If you pick one clear of your neighbors' wireless network, then if it's set to auto (which it probably is), it should adjust around yours and grant you a clear channel. (two networks on auto can occasionally snarl with one another, and the one with more power is going to win. Since yours is a single-band N home router, there's a good chance you'd lose with the routers out these days).