Related
Is it possible to run Android off sdcard just fine and not be able to run it on NAND on certain vogue phones? I have gotten many different Android builds to run off the sdcard but I can't for the life in me to get it to run off NAND. Could there be hardware compatibility issues with some of the vogue phones? This is how far I am able to get when I start installation:
Formatting...
Segmentation fault
Failed
Failed to format
umount: can't umount /system: Invalid argument
umount: can't umount /data: Invalid argument
CyCLoBoT said:
Is it possible to run Android off sdcard just fine and not be able to run it on NAND on certain vogue phones? I have gotten many different Android builds to run off the sdcard but I can't for the life in me to get it to run off NAND. Could there be hardware compatibility issues with some of the vogue phones? This is how far I am able to get when I start installation:
Formatting...
Segmentation fault
Failed
Failed to format
umount: can't umount /system: Invalid argument
umount: can't umount /data: Invalid argument
Click to expand...
Click to collapse
I have the same phone as you (Bell) and am happily using android.
Do you have a HardSPL installed? Did you install the NBH? You can only do a NAND install if you get rid of windows completely.
That's what I am doing. I flashed using the 320 NBH file and I am the Android Installer screen. I selected the default options Sys on NAND and Data on NAND and that's when I'm getting the error I posted in the first post. HardSPL is already installed since I have been running NFSFAN's ROM for a long time now.
CyCLoBoT said:
That's what I am doing. I flashed using the 320 NBH file and I am the Android Installer screen. I selected the default options Sys on NAND and Data on NAND and that's when I'm getting the error I posted in the first post. HardSPL is already installed since I have been running NFSFAN's ROM for a long time now.
Click to expand...
Click to collapse
Did you try using the 2 blank files (systemfstonand and rootfstonand)?
Also, are all of your rootfs.img and system.sqsh files in an android folder on the sdcard?
I never had those files to begin with. I used the latest basefiles and the androidinstall.tar files to boot of sdcard and I am able to run Android just fine. I just can't get it to install on NAND for some reason.
make sure you have an empty data.img
mfpreach said:
make sure you have an empty data.img
Click to expand...
Click to collapse
When I'm flashing the ROM to NAND, do I copy both the system.img and data.img to NAND?
The loader does it for you automatically.
You should try the new method posted by Vilord its even easier.
this is with the new loader...
It is possible there's something specific to your phone, we've run into that before.
I'm working to get more detailed logs out of the installer and will let you know once I've done that.
Unfortunately all updating work (including this and fixing the installcache problem on tattoo) is going to have to wait 'till monday/tuesday timeframe as I'm watching my nephews this weekend.
The thing is, I am able to run all the ROMS just fine from sdcard. I used the new installer method and it worked just fine. As soon as I flash the NBH file (320 and 480), that`s when all these issues come up. I want to get the most out of it running from NAND (speed wise).
CyCLoBoT said:
The thing is, I am able to run all the ROMS just fine from sdcard. I used the new installer method and it worked just fine. As soon as I flash the NBH file (320 and 480), that`s when all these issues come up. I want to get the most out of it running from NAND (speed wise).
Click to expand...
Click to collapse
Have you unlocked your vogue with icoke?
mssmison said:
Have you unlocked your vogue with icoke?
Click to expand...
Click to collapse
Yes it has already been unlocked for over a year now. Right now I am running your ROM through sdcard and its working just fine. But the issue is going to come up when I try to flash it to NAND. I just don't know how to get it to work.
When I'm running installer through using haret, I am selecting ext2 partitions for my system and data files but when the installation is completed, those two files are created in the FAT32 partition instead. What could be causing this?
I'm having the exact same problem. I have 2.31 coke and can flash 6.5 fine.
On my installer option number 1 is fix permissions. With haret its start installation.
I've posted a lot about this issue here, the majority of us are having problems with the Bell branded vogues... I've been able to get as far as having everything written to nand (after hundreds of reboots), and getting the glowing "ANDROID", but it will lock up there.
AFAIK, it seems as though there is an issue with r/w from SD, as I see a lot of timeouts/segfaults/etc. during any SD operations. I haven't bothered going into it any further than that, since I just run it off SD through haret.
Now that I have the ROM running through sdcard, if I flash the NBH file, will it use the same data/system file that's on the two Ext2 partitions?
DO you have the option to start installation? Does anyone know why I don't?? Am I doing something wrong?
Ok I solved my problem... I was trying to do this all on a mac through bootcamp and for some reason it wouldn't work properly. I switch to a pc and it worked fine the first time. Not sure why this is but works great now!
In order to run the Eclaire ROM off NAND, only the system.img file has to be stored on NAND right?
Ok thought might as well start this off myself seen as people keep talking about it, lets have a Q&A thread instead of bashing up the original thread so it can be used just for news and updates.
Does Android work on my HD2?
yes and no, at the moment it boots, no touch-screen driver so that's it so if you try this is what you get
microang has made up some pretty nice versions that dont blue screen check them out here
http://forum.xda-developers.com/showthread.php?p=7032400#post7032400
Can I flash Android?
NO NO NO, it will run from Haret, it will not be a ROM, (yet maybe one day)
Can I boot Ubuntu?
yes you can, but touch-screen issues again,
UPDATE there now is a TS image to use
you would be better off using a mouse and keyboard via a powered usb hub.
Startup txt
Who can I donate to?
Dcordes' PayPal
Cotulla's PayPal
Netripper's PayPal
Links for fatsal-ubuntuX1-20100225 running on you're HD2, there is 3 but i cant find them all post if you have a working link.
http://hotfile.com/dl/51297725/02a8295/fatsal-ubuntuX1-20100225.7z.
thanks to yumm_007 for packaging this up
This Blog site & this Video is as FAKE as it get don't bother with it.
http://alltechdownloads.blogspot.com/
http://www.youtube.com/watch?v=BujRY_q53JI
http://androidforhd2.tk/
This is the IRC channel please dont go and post loads of crap there either
http://webchat.freenode.net/
use channel #htc-linux
Netrippers channel log
http://irclog.netripper.com/?chan=htc-linux&msgonly=0
__________________
Ok I have to go out i will add more and see about a ubuntu Tut to get it running when i get back, please post in here from now so we don't block up the original thread so we can leave that for news and development,
the 2 images are of how i have my folders set up and the other pic of proof it boots
I take no credit for the hard work gone in to this development just tried top clear the thread a bit but that didnt work did it lol, ALL CREDIT GOES TO
Dcordes'
Cotulla's
Netripper's
What I found was that the ubuntu folder must be inside another folder which is on sd root. So tree wise its setup as...
1) SD root
2) Folder (containing the ext2 and the ubuntu folder which contains the haret files)
If you do it like you did, it hangs, I had the same problem. If you do it the way I explained, it gets to the actual linux kernel (tux) but kp's when the modules are to be loaded.
Click to expand...
Click to collapse
Ok, this solves the cpu coherency freeze, what next? what is that we're doing wrong and can't boot the image?
thanks in advance.
artn3r said:
Yes, but i downloaded it over the rapidshare mirror.
what i did:
-copied everything to the sd root
-replaced zimage with the kernel that boots on hd2 (from irc log)
-merged the default.txt and startup.txt of the ubuntu build with the irc-log-build
start haret.exe
Click to expand...
Click to collapse
have you tried this yet???
hi guys,
i currently don`t understand what exactly i have to do to run the HaRET. i`ve downloaded the "fatsal-ubuntuX1-20100225". there are haret and so on and a folder named ubuntu. when i extract it to my sdcard an boot haret i got a stop error "can not access SDroot".
what is wrong? maybe i am stupid?
braumeister said:
hi guys,
i currently don`t understand what exactly i have to do to run the HaRET. i`ve downloaded the "fatsal-ubuntuX1-20100225". there are haret and so on and a folder named ubuntu. when i extract it to my sdcard an boot haret i got a stop error "can not access SDroot".
what is wrong? maybe i am stupid?
Click to expand...
Click to collapse
I got it working on touch diamond start of the year, just downloading for leo now
this was posted
ayilm1 said:
What I found was that the ubuntu folder must be inside another folder which is on sd root. So tree wise its setup as...
1) SD root
2) Folder (containing the ext2 and the ubuntu folder which contains the haret files)
Click to expand...
Click to collapse
Demon_man said:
have you tried this yet???
Click to expand...
Click to collapse
That's the first of it, but go grab artn3r's pre packed ubuntu from the official Android/Linux thread a few posts after the one you quoted I think, and set it up folder wise as...
1) SD root
2) "fatsal-ubuntuX1-20100225" (containing the ext2 and THEN the ubuntu folder which contains the haret files)
That's what I did to make it work but as stated in the official thread, it hangs at the module loader
the name doesn`t matter?
well I'm downloading now, i have to pop out but i will be be back in 45 mins, and ill play try n get it running, if you get it going in the meantime let us no
braumeister said:
the name doesn`t matter?
Click to expand...
Click to collapse
Not sure TBH. Something interesting happens if renamed to something other than the original name though. The coherency test hangs but if reverted, it runs up to the tux.
Just upload ur files if you got it runing
Great idea man!
Demon_man said:
Ok thought might as well start this off myself seen as people keep talking about it, lets have a Q&A thread instead of bashing up the original thread so it can be used just for news and updates.
Click to expand...
Click to collapse
Nice idea man! Glad to see that lot of people is running in the correct way to help this development!
Cheers from Portugal
Ok, SOME progress. Mine HALF succeeded in rebooting after deleting then recopying the files over (making changes of course). It got past the rebooting in 5 seconds hang and now has actually made an attempt to restart. (yay!) But all I got was it declaring it was about to reboot and the Kernel version number. i.e. 2.6.32.9
ayilm1 said:
Not sure TBH. Something interesting happens if renamed to something other than the original name though. The coherency test hangs but if reverted, it runs up to the tux.
Click to expand...
Click to collapse
no it doesn`t matter where the files are or in which folder or how it is called.
tried this:
1) haret, ubuntu folder and co in the root of the sd card
2) new folder called "fatsal-ubuntuX1-20100225" with alle the files and ubuntu folder in there
3) renamed the folder "fatsal-ubuntuX1-20100225" to anything else
does not matter...the result is all the same.
haret booting, init the panel and stops after a line "welcome to kovsky aka xperia - ubuntu" with an error
mount: mounting /dev/block/mmcblk0p1 on /sdcard failed - invalid argument
failed to mount the sd card. cannot continue
/bin/sh: can`t access tty: job control turned off
/ # _ (blinking cursor)
BUT...hardware controls response
braumeister said:
no it doesn`t matter where the files are or in which folder or how it is called.
tried this:
1) haret, ubuntu folder and co in the root of the sd card
2) new folder called "fatsal-ubuntuX1-20100225" with alle the files and ubuntu folder in there
3) renamed the folder "fatsal-ubuntuX1-20100225" to anything else
does not matter...the result is all the same.
haret booting, init the panel and stops after a line "welcome to kovsky aka xperia - ubuntu" with an error
mount: mounting /dev/block/mmcblk0p1 on /sdcard failed - invalid argument
failed to mount the sd card. cannot continue
/bin/sh: can`t access tty: job control turned off
/ # _ (blinking cursor)
BUT...hardware controls response
Click to expand...
Click to collapse
Ok maybe it was just mine acting up then.
have you any partitions on sd card? one or more? if so on which parti do you have the files?
@braumeister
mount: mounting /dev/block/mmcblk0p1 on /sdcard failed - invalid argument
failed to mount the sd card. cannot continue
/bin/sh: can`t access tty: job control turned off
/ # _ (blinking cursor)
Interesting, mine gets none of that. In fact, the loadmodule shell extension is the only think stopping mine from progressing. Oh and umm. It also attempts to switch to rootfs.
braumeister said:
have you any partitions on sd card? one or more? if so on which parti do you have the files?
Click to expand...
Click to collapse
No other partitions, hmmm. But in case this helps, its still got winmo stuff on it, so not formatted to ext2. Doubt that'd make a difference though as the SD's format shouldn't effect the format of the ubuntu image.
transferring files now to my sd card
BOOTED
Hi,
Touchscreen working fine for me.. thanks to cotulla
At bootup it will stuck shortly and show your TS type.. the ones with 2A are the lucky
Image here:
http://cotulla.pp.ru/leo/ImageTS.rar
Do you mind uploading ur setup for unbuntu image?
Thanks you
chris5932 said:
Hi,
Touchscreen working fine for me.. thanks to cotulla
At bootup it will stuck shortly and show your TS type.. the ones with 2A are the lucky
Image here:
http://cotulla.pp.ru/leo/ImageTS.rar
Do you mind uploading ur setup for unbuntu image?
Thanks you
Click to expand...
Click to collapse
do you mean me?? and how you got touchscreen working lol
Can Someone please help me, I know this can't or haven't just been happening to me. Now I downloaded all roms thats suppose to be be able to be used with magldr so I can dual boot with Wp7. I have DL.DesireZ.v2.1.SD and this works when I boot it with magldr also copeNwarren 020211 works and Motoman's Mytouch4g works. Now when I try to boot DL.DesireZ.v3.4.final.SD and MDJ HD 4.6 with magldr it gets past the boot screen but once it starts to load and everything it freezes at the lock screen everytime i boot them and im not understanding why. Espeically when DL.DesireZ.v3.4.final.SD is just an update from DL.DesireZ.v2.1.SD. So can someone tell me why they are freezing before i even get to set them up. Thank You
What directory you are using for Dezire Z? Version 2.1 can use any directory, but 3.4 and higer can work only in Desire_DL directory. Also try to use clean data.img with new version of Desire.Z
If you want boot DesireZ 3.4 from Android directory, put in this directory only 3 files: startup.txt zImage & initrd.gz
In Desire_DL directory you must put conig.txt system.ext2 & data.img
thanks for responding. but im not sure what you mean. I leave the desire_dl 3.4 in the desire_dl folder and just place it on the root of the sd card like it says and then go to magldr and boot it. but it just always freezes before i get to setup it up. It runs when i go to haret from Winmo6.5 but when i run it in magldr it freezes at that lock screen before i get to set it up.
Hi there everyone!
I'm almost a noob in android and am trying to install ClockworkMod Recovery for HD2 - v1.3. I followed the instructions that are in this thread but I can't install because it always gives me this error ...
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: file not exist
Info: .\RSPL\RSPL.cpp (359)
I think it's because I didn't copied the files initrd.gz and zImage to the card, but the zip does not have these files ...I'm trying to install the 150MB partition.
Can someone help me please?
What operating system are you using?
Windows Xp, Vista, or 7?
windows 7.
I've already tried to run de DAF.exe as admin, compatibility mode but no luck...
i don't know if ther is some conection but i'm using MDJ's v2.6 and my radio is 2.15.50.14
I assume these are the steps you did.
How to use;
For MAGLDR NAND Boot;
1. Download recovery with partition size for the type of rom you plan on using, see guide below if unsure.
2. Extract downloaded file and load magldr into USB Flasher mode.
3. Run DAF.exe and follow instructions
4. After completed and phone reboots, hold power key and select AD Recovery from list
5. Recovery will now load
If this does not work. Try to download CWM 1.3 again. Download might of been corrupt.
You do not need the files on the SD card. It should load to nand.
Which mgldr version do you have?
If not 1.3, get 1.3.
i don't know why but today it worked...lol!
Thanks for the help any way!
help
i am having the same problems right now... i tried 3 different links and still no good... if u can help pm me please thanks
I very carefully followed the "newb" thread.
I've installed 2.08 HardSPL, an d MagLDR v113 and my phone has the 12 option menu.
However when I go to click "DAF.exe" (in admin mode, win7 64bit) it just gives me an error.
-----------
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
----------
Now I see the sentence below...in multiple places..like I should know what this is..but I think I'm missing something very important
Run DAF.exe (Right Click and Run As Administrator if you have Vista or Windows 7) in the folder you extracted the image to and follow the intructions on your pc to start flashing
Click to expand...
Click to collapse
What IMAGE is this referring to??
I have a feeling I'm supposed to do something when running DA.exe..it tells me 'readme.txt not found' on the 3rd page so I must be missing this image.
Is this something really stupid I'm missing? This is a new process for me (although I flashed this HD2 a zillion times with Windows ROMs in the past) and clearly I'm supposed to have put MaglDR inside of another folder with something else??
I downloaded the NexusHD2-JellyBean-CM10_V1.3a ROM but there's no image file or anything..help!!
You missed writing a descriptive title
Can I have a look at that "newb" guide of yours?
Also, from there you can just download the "HD2 Toolkit" and install the recovery from there.
thanks! I was using this guide:
http://forum.xda-developers.com/showthread.php?t=893948
I am looking for the toolkit now.
If you're having problems with the toolkit, you can follow this guide starting from step #7. Don't forget to read the important notice at the top should you choose to follow it.
Good luck.
this suddenly got a whole lot more complicated...
i thought once i had HARDSPL 2.08, the 2.15.50.14 radio and MAGLDR v113, I could just double-click a ROM image or something.
nyvram1 said:
this suddenly got a whole lot more complicated...
i thought once i had HARDSPL 2.08, the 2.15.50.14 radio and MAGLDR v113, I could just double-click a ROM image or something.
Click to expand...
Click to collapse
Once you have all of that, you need to flash CWM recovery and then the ROM. It's a lot easier than you would think, provided that you read everything properly. Just follow the guide in my sig (a more updated version of the guide you linked) and you'll be fine.
thanks! i just flashed to the 'stock' LEO ROM..i see..the DAF.exe is generally in the directory w/ the image you download..but I'm guessing that process is old.
I will read your guide and see about getting CWM and a newer ROM now that i know it has a 'base' ROM and is talking to the PC ok.
THank you so much! I just want to put a stable version of JB on here and see if this phone still has some life left..its been in a drawer for months.
THANK YOU!!!! i'm running the NexusHD2 jellybean ROM now as well!! that was easy.
PS i also have a nexus 4 so we have similar phone setups.
the HD2 lasted until i got my nexus back in november.
nyvram1 said:
I very carefully followed the "newb" thread.
I've installed 2.08 HardSPL, an d MagLDR v113 and my phone has the 12 option menu.
However when I go to click "DAF.exe" (in admin mode, win7 64bit) it just gives me an error.
-----------
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
----------
Now I see the sentence below...in multiple places..like I should know what this is..but I think I'm missing something very important
What IMAGE is this referring to??
I have a feeling I'm supposed to do something when running DA.exe..it tells me 'readme.txt not found' on the 3rd page so I must be missing this image.
Is this something really stupid I'm missing? This is a new process for me (although I flashed this HD2 a zillion times with Windows ROMs in the past) and clearly I'm supposed to have put MaglDR inside of another folder with something else??
I downloaded the NexusHD2-JellyBean-CM10_V1.3a ROM but there's no image file or anything..help!!
Click to expand...
Click to collapse
Is there a file called FLASH.CFG in the folder where DAF.EXE is located? You may have to create one - there should be at least a sample file included.
If you need a sample file downloads this one but be sure to modify it to suit the ROM you want to install.
flash.cfg - 134 bytes
---
I used to be indecisive. Now I'm not sure... (via Tapatalk)