Hey guys I've done a lot of searching and have come up with nothing.
I have successfully rooted my girlfriends Magic 32A and it is now running
Radio: 6.35.10.18
SPL: 1.76.2007
I would like to flash Cyanogen RC2 to the phone but when I try it has an error saying (Type 7) or something at the bottom and just before that it says stuff about H-Boot 1.36 or something similar which I realise is a different version to what I am currently running.
Does Cyanogen not work with the specifications I have? and if not then what can I do to get it on my girlfriends Magic?
It's currently running FroyoRiders rom which installed fine but I want her to have a working camera.
Any help would be great, thanks!
*Edit* I have also tried like 5 different recoveries so I'm pretty sure it is not that!
I recently had similar issues on my Rogers Magic with flashing roms, no matter what rom I tried, nothing seemed to want to flash properly until I reverted back to the old radio/spl combo. Once I did that, I've been able to flash whatever rom I want, of course needing a kernel port for some roms to work on the 32a, but it is a whole lot further than no roms at all
The old SPL was perfected and wouldn't allow me to flash roms... Can someone suggest a SPL and Radio combo that work with Cyanogen 32A and perhaps a way to get that SPL/Radio combo?
No, I'm talking older than that. I'm using the old radio with the spl 1.33.2009, I believe that's the one anyway... give me about an hour and I'll point you to the tool I used
Sent from my HTC Magic using XDA App
Okay thanks, I've got a feeling that you need SPL 1.33.x or something for Cyanogen Rom to install as I have 1.76.x .. However I can't find anything confirming this anywhere. It is safe to downgrade to a 1.33 SPL on a 32A with 6.35.10.18 radio?
Well, for one thing reading the forums would have brought you to the conclusion that new radio and old spl don't play well together. You can only use spl 1.33 with radio 3.22 and spl 1.76 with radio 6.35.
In the sapphire dev forum you'll find a tool to switch radio and spl quickly and safely. Use it to move to the old radio/spl and install whatever rom you want from recovery.
keinengel said:
Well, for one thing reading the forums would have brought you to the conclusion that new radio and old spl don't play well together. You can only use spl 1.33 with radio 3.22 and spl 1.76 with radio 6.35.
In the sapphire dev forum you'll find a tool to switch radio and spl quickly and safely. Use it to move to the old radio/spl and install whatever rom you want from recovery.
Click to expand...
Click to collapse
Okay yeah I pretty much gathered that from reading around... What I'm wondering is does Cyanogen actually require the 1.33 spl to install?
Not if you don't need a working camera/camcorder
keinengel said:
Not if you don't need a working camera/camcorder
Click to expand...
Click to collapse
Ah okay so the other radio is required for the camera drivers. Which would explain why it doesn't work on this FroyoRider rom then I take it?
Thanks for your help. I'll try use this Radio Switcher to go to the other version then flash Cyanogen RC2
*Edit* Just to make sure, does using the "Flash Default SPL, Radio, Recovery" on Radio Switcher get me to the right 1.33 version? Or do I need to find the custom files somewhere?
Open the latest version of the tool (3.5 I think) and click flash old with your phone in fastboot and connected to your pc. All the files you need are included in the archive.
I also had this issue trying to flash RC2 on my Rogers Magic.
Please be aware that if we flash the old radio Rogers will block data.
Is there any way to keep the new radio and get around this flashing issue? I'd love to try CM6 but not without data!
I'm happy to provide any logs or whatever.
Related
Short question:
Do I need to update my SPL and the Radio? SPL and the Radio versions mentioned on haykuro's google code website seem to be different than what I have on my phone. Here's the fastboot mode information from my phone (with three skateboarding Androids at the bottom)
DREA100 PVT 32B
HSPL10.95.3000
CPLD-4
RADIO-1.22.14.11
Oct 20, 2008
Serial0
Longer Description:
I had the stock G1, followed this awesome tutorial http://forum.xda-developers.com/showthread.php?t=442480 to root my phone and installed JF1.42 on my phone. Last night, I decided to try haykuro's 5.0.1Gr2 and ended up with "Build Number: unknown" in the About Phone section and unable to download any apps from the android market (I guess due to the missing keys and proper identification).
And I found that haykuro had a newer version of radio listed on his website and also his own SPL. So, I am wondering... should I upgrade to haykuro's versions? TIA
xdamaddy said:
Short question:
Do I need to update my SPL and the Radio? SPL and the Radio versions mentioned on haykuro's google code website seem to be different than what I have on my phone. Here's the fastboot mode information from my phone (with three skateboarding Androids at the bottom)
DREA100 PVT 32B
HSPL10.95.3000
CPLD-4
RADIO-1.22.14.11
Oct 20, 2008
Serial0
Longer Description:
I had the stock G1, followed this awesome tutorial http://forum.xda-developers.com/showthread.php?t=442480 to root my phone and installed JF1.42 on my phone. Last night, I decided to try haykuro's 5.0.1Gr2 and ended up with "Build Number: unknown" in the About Phone section and unable to download any apps from the android market (I guess due to the missing keys and proper identification).
And I found that haykuro had a newer version of radio listed on his website and also his own SPL. So, I am wondering... should I upgrade to haykuro's versions? TIA
Click to expand...
Click to collapse
Here's a good reference for everything related to the haykuro builds:
http://wiki.xda-developers.com/index.php?pagename=HTC_Dream__haykuro_Cupcake
Here's the short version, though:
I haven't really looked at the new haykuro SPL, but from the version info you posted, you currently have HardSPL. This is fine - the new SPL isn't required.
As for the radio - it's recommended that you use the radio image meant specifically for the build you are using, in general.
Also, it looks like you've got the RC33 version of the radio, and I personally had no problems using the RC33 radio with the haykuro 5.0.2H build, but others have experienced weird signal problems, so if you start having signal issues, I'd update, otherwise it's just up to you.
Hello,
I am running 5.0.1G (not R2) and only updated the radio from his site.
Mine was running fine on the RC33/RC9 radio, but heard battery life was better with thenewer radio....which it is!
I have not changed the SPL, still running the original Hard SPL and it works fine.
Thanks for the quick responses guys. I will update the Radio then and leave the SPL alone, for now .
I have a question about SPL, maybe a noob's one, so please forgive me.
According to what I have read so far, u must have the latest Radio in order to avoid bricking your phone when updating to the Haykuro's SPL. My baseband version is 62.50S.20.17U_2.22.19.26I, not exactly the same as the one posted on Haykuro's page, which is 62.50S.20.17H_2.22.19.26I. Is that a big deal ? I really want to move to Haykuro's SPL or at least another one beside stock's SPL.
Thanks in advance
The haykuro spl or more commonly known around here as the danger spl is only needed if you plan on using or trying a hero rom, for any other rom like jf or cyanogen you can use your stock spl or hard spl. If you do plan on using a hero rom just go to android devolpment section, click on a hero rom and it will have a link to the lastest radio and spl that is needed. Just make sure that you flash the radio first before the spl or u will have a brick
This might be a dumb question and these might be the cause of all my FC's and lag. But when I see "require updated spl" does that mean update my HBOOT?
My current HBOOT is " HBOOT-1.33.0006" Am i out of date?
My stats are below.................
kuntri said:
This might be a dumb question and these might be the cause of all my FC's and lag. But when I see "require updated spl" does that mean update my HBOOT?
My current HBOOT is " HBOOT-1.33.0006" Am i out of date?
My stats are below.................
Click to expand...
Click to collapse
Yes especialy when you go for a 2.1 version.
You need:
- 1.76.xxxx Engineering spl (ie: 1.76.2007)
- 6.35.10.xxx Radio (ie: 6.35.10.18)
Check the upgrade method at http://forum.xda-developers.com/showthread.php?t=605239
silvertag said:
Yes especialy when you go for a 2.1 version.
You need:
- 1.76.xxxx Engineering spl (ie: 1.76.2007)
- 6.35.10.xxx Radio (ie: 6.35.10.18)
Check the upgrade method at http://forum.xda-developers.com/showthread.php?t=605239
Click to expand...
Click to collapse
NOOOOOO! He's on a 32B board, you're on a 32A board. You just instructed him to flash an SPL and radio for a 32A. IGNORE THIS! You DO NOT need a new SPL, stay with what you have! You have more than enough internal ROM to flash just about any custom rom to your phone. Unless specifically instructed to flash a specific SPL for a specific ROM for the MT3G, then don't flash a new SPL. Most roms based off of 1.6 will only require that you do a full wipe in recovery and flash the custom rom. However, the majority of eclair roms will require you to partition your SD card. But you DO NOT...I repeat...DO NOT need a new SPL.
Oopsy lol my bad... totatly missed the 32B.
thanks for catching it.
but what if the rom requires you to have flash a new spl?? like I see alot of roms require the danger spl... and if i flash a radio and then the danger spl can i keep the danger spl and upgrade to 2.22.23.02 or do i have to keep the same radio??
@mizzel16
Check out the thread I started... I haven't done any of the other roms yet that say they need the Danger SPL... but from the answers I got, it looks like Magic phones don't need it.
I did the radio a few weeks ago tho, and that went smoothly without a hitch.
hi dudes
i flashed 6.35 Radio and 1.76.2007 SPL for some sense mod
but now im bored by it and wanted to return to CM
now nomatter how i try i just cant get it to work, after installing the rom it would get stuck at the opening scene
is it that magic with 6.35 Radio and 1.76.2007 SPL just cant use CM?
thanks
KonW said:
hi dudes
i flashed 6.35 Radio and 1.76.2007 SPL for some sense mod
but now im bored by it and wanted to return to CM
now nomatter how i try i just cant get it to work, after installing the rom it would get stuck at the opening scene
is it that magic with 6.35 Radio and 1.76.2007 SPL just cant use CM?
thanks
Click to expand...
Click to collapse
It's the Radio that's giving you grief. Cyanogen will not run on 6.35.x radio. I've been down that road already.
What I ended up doing was reapplying the Rogers RUU from last July and then rooting from there. I'm now running CM 5.0.7 Test 3 and I'm using the radio that was installed on the Dream with the mandatory E911 update. So far it's been 7 hours and my data hasn't been cut yet. Fingers crossed.
If you want to keep that SPL and Radio combo, I've seen mentions of cursordroid as a Rom that will run on it. I'm using SPL 1.33.2005 with Radio 3.22.26.17
I did this on an HTC Magic from Rogers that uses an EBI1 radio, if your phone uses the EBI0 radio don't try to use the radio that I did. I did also see somewhere on the forum here that one of the members has a batch file for performing the changes between the SPL/Radio combos. You'll have to look around.
thanks man,
Downgraded back to 3.22 Radio and SPL
flashed cm
worked like charm
Confused about flashing SPLs. Never flashed one before. The radio I have installed is the myTouch-radio-2_22_23_02 and I want to flash the Danger SPL but are they compatible. Moreover, I've see and heard different tutorials about the subject. Some say when flashing a new spl wipe/flash radio first, then wipe/flash radio, then partition sd card, finally flash rom. Some say just wipe/flash the new spl w/out then rom. Which one is it? I already have the radio installed that I want to use, so do I have to flash it again to flash a new spl?
Phone: MT3G (32B)
Radio: 2_22_23_02
SPL: 1.33.0006
ROM: Gingerfly 1.7 D/S ADS
Android: 2.2.1
The new/old radio and SPL talk is for the 32A - the Magic sold in Canada, Brazil and some parts of Europe. You shouldn't worry about that.
You can flash the SPL and you're done.
Thanks I'll give it a shot
Sent from my HTC Magic using XDA App
Well, I managed to do something which I regret profusely now.
When I heard that the HTC Magic was getting an official update I thought that it would have been a fast, optimised Froyo experience. Boy was I wrong.
Now I'm stuck with a phone that can't open the messaging application without closing the homescreen process and the old methods to root my phone no longer work.
And to top it off, I wanted to use CyanogenMod 4 since 1.6 runs the best on my phone, yet I don't know if I can do that anymore since the update also changed the radio and I think the SPL.
So, long story short, how can I get a 1.6 ROM on this phone now?
Also an unimportant question, would Replicant still work on this phone if it has the new radio?
Is there no one who can help with this?
I was just wondering what ROMs are compatible with the new radio and SPL.
They're 2.22.28.25 and 1.33.0013 respectively, I'm pretty sure they are anyway.
vote_gough said:
I was just wondering what ROMs are compatible with the new radio and SPL.
They're 2.22.28.25 and 1.33.0013 respectively, I'm pretty sure they are anyway.
Click to expand...
Click to collapse
Friend, there are too many ROMs...
Look here:
http://forum.xda-developers.com/forumdisplay.php?f=448
http://forum.xda-developers.com/forumdisplay.php?f=493
Example:
http://forum.xda-developers.com/showthread.php?t=1185027
Read description:
SUPPORTED SPL'S: 1.33.0013|1.33.2013|1.33.3013|1.33.0013d
This rom is compatible...
http://forum.xda-developers.com/showthread.php?t=932118
for 32b you need SPL 1.33.0013d and RADIO 2.22.28.25 or 27.08 just flash normal ginger yoshi
Another compatible rom
All you need is get root and flash custom recovery, then rom through recovery...