Hello. I'm sure that this must have been discussed but I cannot find the answer using search. As is surely normal, I use WiFi within the home and GPRS when there is no WiFi available. If WiFi is connected and I go out for a short while, then when I get back in a WiFi area, the WiFi is still connected. However, if I go away for a long time, and GPRS is used for perhaps a regular weather update, then the WiFi disconnects and has to be manually reconnected upon return to home. This leads to GPRS being used in a WiFi area unnecessarily if you forget to re-connect WiFi. Is there a WiFi connection timeout value or any other setting that can be changed? My old TyTN II did not have this problem. Thanks.
Try this CAB
It disable disconnecting WiFi when phone is in sleep mode and with this phone automaticly connects to WiFi when Leo will be in range.
Thanks Franq_23_pl. I think that the CAB just stops WiFi disconnecting when the device is in sleep mode. That will just drain the battery, surely? My old TyTN used to disable WiFi when in sleep mode, but as soon as you switched it on again, WiFi would be enabled and it would connect if in range. The problem with my HD2/Leo is that if I am away from my WiFi for some considerable time (ie, most of the day), then when I get back home and switch the device on, WiFi is disabled, and I have to manually toggle in on. So my question is..... What are the circumstances that cause WiFi to disable itself, and Is there some way of stopping it happening?
OIC now. I think you having some battery saving app and this app turning off WiFi when iz not used. What apps or registry mods you have installed on Leo?
You have the same behavior after hard reset?
My Leo don't disable WiFi. When i go outside (for ex to work) and back after few hours my Leo connecting to my home wireless network automaticly.
I remember, that i had the same problem like you and it was caused by app, which had duty to save battery.
Related
So I've noticed this over the past few days since I've been flying and in bad service areas. When there is no network access, such as being in Airplane mode, or in a no service area, my Wifi automatically turns on. I have Activesync polling every 15 minutes, so I can only imagine that the phone is trying to access the network, is unable, and starts up Wifi.
Is anyone else having this problem, and does anyone know how to turn it off?
Thanks.
are you using 3rd party software to toggle Wifi? (e.g. Wifitoggle) It seems that only the Comm.Manager can turn on/off Wifi properly.
I've used the HD2 Connectionz shotcuts. Even without using those it was happening, though.
I am having the same issue as well.......anyone fixed this?
me 2.
But I've only noticed this after using a Wifi toggle.
I had it after installing the home tab quicklink toggles, uninstalled it, everything OK again.
Now I've installed the End key with Wifi... and the problem returns...
I'm going to check my dialing rules, maybe that will help.
I have been having this issue too over the last 2 or 3 weeks, i have no wifitoggle or anything like that installed. I turn my GPRS off when i have finished using my phone and if the phone cant get a gprs connection when locked it seems to auto turn the wifi on in the hopes that you are next to one of the few wifi spots you have enabled on the phone!
This needs looking at and fixing cos i find my wifi connection drains the battery big time esp when there is nothing to connect to as i am at work!
guys i m having the same issue ..i think its a bug in hd..2 i just got the phone 2 days..ago any solution
wifi
This issue still hasn't been resolved in the 3.14 rom with 2.14.50.04 radio....
using energy rom september 23/24 21679
I believe it's related to the wi-fi toggle in cht, still testing...
edit: The wifi issue IS solved when using Comm manager to turn wifi off, not using the toggle as stated by ozkaya
have the same problem, did some research on this and for me anyway its is, I have push email set up from google and if i am on a phone call wi-fi turns on to keep the connection alive, also if i have no service then again wi-fi to keep connection active
Anyone found the solution for this issue already? I have got the Raphael, but the issue is the same. Activesync with gmail, it checks for mails every 30 minutes. Whenever there is no network it automatically turns on the WiFi. I replaced Radio on my device and the problems are not too often, but it has only something to do with the strength of signal. For me this happens only when I have ActiveSync synchronization set up. If I use IMAP all is ok.
EDIT: I think the issue is about toggle buttons in CHT. When I got to the connection manager a switch off the WiFi there instead of by the CHT Toggle button, the problem disappeared.
[
EDIT: I think the issue is about toggle buttons in CHT. When I got to the connection manager a switch off the WiFi there instead of by the CHT Toggle button, the problem disappeared.[/QUOTE]
This is definetly the case, the issue only hapoens when switching off wifi using Cht toggle. Use com manager and alk is ok
Hello everyone
I am seeing a strange behaviour of heroine rom, when the screen is turned off the phone loses the wifi connection. I have tried to set it to never switch off wifi but it seems ineffective. I was wondering if I could fiddle some other settings to sort the problem out.
If I reflash with the same rom, will I lose all the installed apps/phone numbers, google apps?
I am currently not in 3G nor gprs coverage so I can only use wifi.
thanks
Configuration
Hi,
I had that rom on my hero and works fine, i remeber that there is a configuration in setting of WIFI when you can change a wifi sleep policy, try it
hello
it is already set to keep wifi always on
I tried to install an app to keep wifi on, called wi-fi keep alive. Unfortunately it does not really work.
The phone disconnects after the screen goes off, in around 2-5 min maximum.
I tried all the workaround, including the ping option, but it is simply ineffective.
any suggestion? idea? config file to edit?
I've had my Nexus for about a week now and noticed two strange issues with the WIFI connection.
1. I can connect to WIFI successfully at home but as soon as I go out and it switches to the 2G network and then later go back inside the WIFI doesn't auto connect it will stay on 2G, I have to disable and enable WIFI to connect to my home WIFI, is there a way round this or is it a bug?
2. Whenever I'm out an about and the phone detects a WIFI network even if its not configured to connect to the WIFI network the phone seems to disable 2G Data connection and continually notifies me of a WIFI network being in range and wanting to configure it, is there anyway of disabling this behavior and allowing the 2G Data connection to be active when no configured WIFI network are in range?
Any help would be much appreciated.
Thanks
Jon
Really can't help you much on the settings as I don't quite have my N4 but you should always turn wifi off when you're not using it. You will get much better battery and you wont have problem with #2. Sorry I couldn't really help much.
Sent from my epic touch, waiting for my Nexus 4
jonchill said:
I've had my Nexus for about a week now and noticed two strange issues with the WIFI connection.
1. I can connect to WIFI successfully at home but as soon as I go out and it switches to the 2G network and then later go back inside the WIFI doesn't auto connect it will stay on 2G, I have to disable and enable WIFI to connect to my home WIFI, is there a way round this or is it a bug?
2. Whenever I'm out an about and the phone detects a WIFI network even if its not configured to connect to the WIFI network the phone seems to disable 2G Data connection and continually notifies me of a WIFI network being in range and wanting to configure it, is there anyway of disabling this behavior and allowing the 2G Data connection to be active when no configured WIFI network are in range?
Any help would be much appreciated.
Thanks
Jon
Click to expand...
Click to collapse
I have the same issue number 1. I find the battery is getting used quickly and the wifi will not connect. if i disable then enable, it quickly connects to the known wifi signal. I can see a different battery decay slope if I let this problem persist for a few hours, it then reverts to its usual slope once wifi is restarted. This problem usually only occurs once a day on average. I hope someone knows how to solve this issue.
cheers
Rich
Hello to all I have the following problem: When the phone goes in standby i noticed that after a few minutes the phone disconnects from the internet then resume immediately as soon as I touch the phone and the screen turn on.
I have this problem with both Wifi and with the data connection.
I tried to solve the problem with the wifi option enabled in (Settings -> WiFi -> Advanced -> Wifi sleep policy) setting it to Never. But I notice that practically when i wake up the phone from standby , he is not using the wifi connection , but the data connection, and after a few second he will re-connect to wifi.when I'm not using more wifi, but the data connection.
From what I understand after X minutes in Stand by Android will disable the wifi and uses the data connection, and when i "wake up" the phone by turning the phone screen after a few seconds reconnects with wifi.
It 'really frustrating to have internet to that goes "on and off" especially when i am at work and the signal for the data connection is not present, in this case i can't even receive email or whatapp message when the phone in in stand by
Is there a way to force the phone to always use wifi even when it is in standby mode without the "support" of the data connection?
Hi!
up please
well actually if wifi policy is set to never, it should NEVER turn wifi off when the phone is in stand-by (at least it doesnt turn off on my phone), thats just how it works.. have u tried turning ur data connection off ? does it still disconnect ?
Poroto said:
well actually if wifi policy is set to never, it should NEVER turn wifi off when the phone is in stand-by (at least it doesnt turn off on my phone), thats just how it works.. have u tried turning ur data connection off ? does it still disconnect ?
Click to expand...
Click to collapse
If i disable the data connection, the wifi connection just turn off after x minutes when the phone is in the stand by (even if i set to "Never" the wifi sleep policy) and will turn on after few second when i turn on the display. So what can be the problem?
N.B. I have DISABLED all "power save" option and there IS NOT such app like "battery safe" etc...,i have also tried to reset my phone. But the problem is always the same.
Hi!
BeastAndHarlot said:
If i disable the data connection, the wifi connection just turn off after x minutes when the phone is in the stand by (even if i set to "Never" the wifi sleep policy) and will turn on after few second when i turn on the display. So what can be the problem?
N.B. I have DISABLED all "power save" option and there IS NOT such app like "battery safe" etc...,i have also tried to reset my phone. But the problem is always the same.
Hi!
Click to expand...
Click to collapse
Well, actualiy, the policy says: "Keep Wi-Fi ON durung sleep", so you should set it to "Always".
So, did you fix the problem?
As the title suggests, my phone will not connect to known WiFi networks if I do not wake the phone myself.
Image being away from home, having both mobile data and WiFi enabled. The screen is off throughout the whole time and when I reach home it is supposed to connect to my WiFi. Instead, it connects to my WiFi only if I wake the phone. If I leave the phone sleeping (standby) it will stay on mobile data, unless I wake the phone myself.
Is this regular behaviour?
PS. The phone has not problem retaining connection to WiFi networks when sleeping. It just won't make a new connection even to know networks.
There is a setting in wifi settings under advanced where you can change how and when the wifi must be on/off.
termdj said:
There is a setting in wifi settings under advanced where you can change how and when the wifi must be on/off.
Click to expand...
Click to collapse
If you mean "Keep WiFi on during sleep", I have it enabled already!
Have you played around with power saving settings?