Database Users

[Q] Rooted but adb says I am not?

I searched around several threads and saw a few people with the same issue but no fixes.
I rooted my phone using this and it worked great.
I then installed clockwork manager from here and then installed the clockwork recovery and made my nandroid.
So far so good.
I booted up and then checked the terminal emulator app i had installed and did:
Code:
$su
and got
Code:
#
So, all good.
I then went to remove some of the bloatware by using adb.
When I do adb shell I get the $ prompt.
I type in "su" without quotes and after a few seconds i get "Permission denied".
Seems like i fudged something somewhere but I am not sure what.
Anyone able to offer some constructive help?

Make sure your phone is unlocked when you type su in adb shell, and a superuser permission should pop up.

many thanks for that!
i have been on a rooted G1 with CM for so long that i forgot to even look at my phone when i "adb shell...su" into it =)
did it just now and looked at the phone and the superuser permissions window came up. all set.
thanks again!

[Q] ADB remount issue

First off, I'm fairly new to the Droid X and this is my second android phone(the first was an Eris which should be kinda obvious). I am rooted but, for whatever reason, I cannot run the adb remount command from the prompt. I can run other commands like adb shell bootanimation which runs my boot animation and when i enter in adb shell it returns a $. $ does mean rooted, correct?
Also, when i try to run the sdk manager i get the "java not found in your your path" The weird thing is that it is in the path. So i'm getting frustrated now and I know it is probably something simple that i am overlooking.
If anyone can help out, I would greatly appreciate the help.

DroidEris1981 said:
First off, I'm fairly new to the Droid X and this is my second android phone(the first was an Eris which should be kinda obvious). I am rooted but, for whatever reason, I cannot run the adb remount command from the prompt. I can run other commands like adb shell bootanimation which runs my boot animation and when i enter in adb shell it returns a $. $ does mean rooted, correct?
Also, when i try to run the sdk manager i get the "java not found in your your path" The weird thing is that it is in the path. So i'm getting frustrated now and I know it is probably something simple that i am overlooking.
If anyone can help out, I would greatly appreciate the help.
Click to expand...
Click to collapse
$ does not mean rooted. from that prompt you can enter 'su' and you should get an '#' and then you are using root.
However, by default, the ADB daemon is not running with root privileges. Thus when you try to ADB remount it gets denied.
You need to run a 'Root Elevated' adb daemon. Or you can manually remount the /system partition from adb shell.
Why does the Droid X Recovery Bootstrap start on boot?
As mentioned above, it needs to log that your phone booted successfully and recovery mode is not necessary. It also replaces your "adb daemon" with one that has root permissions, allowing for easier usage of the adb command.
Click to expand...
Click to collapse
I know that if you install/run DroidX Bootstrapper (which installs the ClockworkMod Recovery) it also sets up a root elevated ADB daemon. You will need to reboot after installing before this takes effect.

[Q] Command Prompt Issue When Trying To Exit ADB Shell?

Hi this is my first post on the site and i would appreciate it if anyone could help me with this problem. (I know your probably fed up of hearing about rooting problems but anyway!)
I have succesfully installed ADB and as far as i know it seems to be working properley as i can access the ADB shell on my device.
However when i get to a certain stage of the rooting process it all seems to go wrong.
wiki.cyanogenmod.com/index.php?title=HTC_Tattoo:_Full_Update_Guide
I have been using the above rooting guide (can't hyperlink first post!) and i cannot get past stage 7 of the process because the 'exit' command doesnt seem to work in Command Prompt (Windows 7) and it is stopping me from being able to exit the ADB Shell. I have tried other ways of exiting the shell such as ctrl+C but this kills ADB completely and i think that it is undoing the previous steps of the guide.
I do get the message:
uid=0(root) gid=1000(shell) groups=1003(graphics),1004(input),1007(log),1011(adb),1015(sdcard_rw),3001(net_bt_admin),3002(net_bt),3003(inet)
so i think that i have successfully rooted the device but i cannot proceed to push the 'su' file to the device as i can't exit the adb shell, i just keep getting lists of text saying reboot (-n) (-p) and everytime i use the exit command nothing seems to happen and the flashing # symbol keeps coming back.
Has anybody else had this problem? or have any idea of how to stop the ADB Shell with any other commands other than 'exi't or Ctrl+C?
Cheers.

If device is rooted, by writing in command prompt the command "adb shell", must appear the symbol #, if the symbol $ appears the device isn't rooted.
If you cannot use adb from pc, run on device a terminal emulator(you can find one on market) the above command to see if you're rooted. Then you can give the next commands from terminal emulator(maybe you need to copy the nessecary files on sd card and change the related paths to point to sd card)

I'm having the exact same problem while rooting my HTC Tattoo (on Windows 7).
I have Android 1.6 (Donut), the baseband is 13.29a.55.13H_3.35.07.33, kernel is 2.6.29-gf922713 and build is 1.67.173.37.
Please help and thanks in advance . I really want to install CyanogenMod 7...

more info
When i say i have rooted the device i mean temporarily by pushing and changing the 'm7' file, the problem is pushing the 'su' file to the device to make the root permanent.
I do get the # symbol when in ADB Shell but only after changing m7 on the device. As i cannot complete the whole rooting process the # is not there permanently and it returns to the $ symbol.
Thanks for the reply, i will try and do it using a terminal on the device. Do you not need root access to use a terminal app?

I'm having the same issue. When I input exit it stucks into that loop and then I got to ctrl+c, and of course the root does not stick
From that point forward I can't do anything else...
If someone overcome the problem please post.

I just used this app to root a zte blade with a new greek stock rom:
http://forum.xda-developers.com/showthread.php?t=803682
Seems to work for almost all devices and in first post have some info about root levels and links to a workaround for devices that have some lock which prevents the full rooting.
I didn't tried anythink cause the rooting process was successful, but you can try this app and if still have problems try to follow the instructions given.
Good luck.

If you have your mobile rooted can you just use this commands:
cd /data/local/bin/
chmod 755 flash_image
flash_image recovery /sdcard/recovery-clockwork-x.x.x.x-click.img
to perform a recovery flash? Without using the su command?
I don't remember if I tried it, but, if it works I recommend using Androot for rooting the device, it worked for me(checked by Root Checker ).
I'm mentioning this just because you recommended the SuperOneClick app.

Update:
For all trying to get thing done, follow the instructions on 1Click modified by tenis and flash the latest cyanogenmod.
It worked!!!

I got it to work using androot. Cm7 is awesome
Sent from my HTC click using XDA App

exit command in adb seems to lock up
like omgsufc, I also reach this stage and can see the message:
uid=0(root) gid=1000(shell) groups=1003(graphics),1004(input),1007(log),1011(a db),1015(sdcard_rw),3001(net_bt_admin),3002(net_bt ),3003(inet)
Again, like omgsufc, when I issue the command:
# exit
ADB shell seems to go into some kind of loop. Pressing ctrl-c or ctrl-d also give the same results. I thus can't go to the next stage. Any help or clues would be greatly appreciated.
I'm on Ubuntu 11.04.
TIA for any help.

Finally got it to work
No matter what I did, rooting using m7 just didn't work for me (Ubuntu 11.04). Running 'while ./m7 ; do : ; done' got me temporarily rooted as issuing 'id' shows me at 'uid=0(root)'. However, issuing 'exit' just left me in a long loop in the terminal from which it never recovers, and hence I could not complete the root process this way.
So I tried androot, which appeared to root me right away. Issuing 'su' in Android Terminal worked, and doing the same in ADB Shell also gets me to the # prompt. However, issuing the 'flash_image recovery' failed no matter what I did. I tried ROM Manager after this initial androot root: it gives me a success message after flashing ClockworkMod recovery, but when I reboot into recovery it just fails. Fastboot also failed consistently.
Finally, when I tried Terminal Emulator to get root access by issuing the command 'su', it says permission denied, even though Terminal Emulator gave me root access.
So... I unrooted Androot. Again trying to root using m7 I got the same problems as before.
I didn't bother trying flash_image or fastboot and instead tried rooting with androot. After doing so, this time Terminal Emulator allowed root access, which gave me some hope.
So I pulled out ROM Manager again, and woot! My Tattoo is on CyanogenMod 7 and am I a happy camper! I like what Cyanogen has given us: ADW Launcher is as good for me as Sense ever was... actually it's better. And finally I get to use all the new apps I've been wanting to use but wouldn't run on Android 1.6.
So thank you Cyanogen, thank you xda-developers, particularly KalimochoAz, thank you Koushik Dutta for ROM Manager, and thank you, whorever developed androot!

Issues With Even Running Root? :(

Running with instructions here:
http://wiki.cyanogenmod.org/wiki/HTC_Glacier:_Full_Update_Guide#Rooting_the_HTC_Glacier
but after going into adb shell and running:
adb push busybox /data/local/tmp/
I'm getting a "permission denied" error for any adb for that or any adb command I throw at it.
I do notice that my adb shell starts with $ instead of # but not sure what step I'm missing. Any help would be greatly appreciated. Trying to breath new life in this thing and don't have any account/market setup on it - so if I can do the rooting through this it'll be easier for me otherwise I'll go ahead and setup another G-account to do it that way if I have to :\

Try executing "adb shell mkdir /data/local/tmp" and try again.
If doesn't work - try changing all /data/local/tmp references to /data/local

thanks for the feedback Jack_R1
Unfortunately that's a no go... same error even with that

Then you're doing something wrong. Follow the guides EXACTLY. Don't do stuff that's not written, do the stuff that's written EXACTLY as it's written, verify that you're starting where the guides expect you to and have all the prerequisites, and it'll work. Your phone isn't different from any other phone, and if something that works for million others doesn't work for you - then you're doing something wrong.
For example, nobody asked you to get into ADB shell to run these commands you're running. You can't run "adb" while being inside ADB shell. Read the guide PROPERLY.

Jack_R1 said:
Then you're doing something wrong. Follow the guides EXACTLY. Don't do stuff that's not written, do the stuff that's written EXACTLY as it's written, verify that you're starting where the guides expect you to and have all the prerequisites, and it'll work. Your phone isn't different from any other phone, and if something that works for million others doesn't work for you - then you're doing something wrong.
For example, nobody asked you to get into ADB shell to run these commands you're running. You can't run "adb" while being inside ADB shell. Read the guide PROPERLY.
Click to expand...
Click to collapse
Thanks,
I did try to follow things to the T but diverted away from doing things -exactly- since starting with "adb push busybox /data/local/tmp/" command I keep getting a "cannot stat 'busybox': No such file or directory"
So in reality.. .THAT was my main issue which is leading to me trying other stuff such as the "adb shell" and not getting # (since I'm pushing files to gain root)
Turns out I'm now able to get "adb push" working on my files since.. I hate myself for it being this simple... I just had to "CD" into my /platform-tools folder since command prompt started in my documents folder by default thus it was looking there for my files
Welp, thanks for the help anyway. Seen this question lingering around in Google Search and hope this helps out someone else :good:

ADB Pull Error

I am getting the following error when I try to pull a TWRP backup from my Nexus 4. Can anyone please help?
Code:
remote object '/sdcard/TWRP' does not exist

It doesn't exist there. /sdcard/ is really a symlink. The actual location is /data/media/0/TWRP, but try /storage/emulated/0/TWRP as well.
Next time type "adb shell" to go into the phone, then type:
find / -type d -iname twrp
this will search the entire phone for folders with the name TWRP and list their path.
/ is the root folder of the phone to search in
-type d means search for folders only, leave it out if you want to search for file names
-iname means to search for terms case insensitive
sent from xda premium app

Thanks for the help eksasol. I've tried to pull many different paths and they all return the same remote object does not exist error. I've even tried sudo adb pull, with the same result. I've tried this, find / -type d -iname twrp but, all I get is Permission denied. If anyone else has got some ideas I'd be happy to hear them. Thanks. :good:

If you are using Ubuntu or linux, typing 'find' only search what is in your PC. You get permission denied because you want to search in a root directly that required root permission.
To search for files in your phone, you need to log into your phone by typing "adb shell". TWRP give you root by default, then you can use the find command.
Since you have root by default in TWRP, you don't need to use sudo, also Android do not have "sudo" installed. The correct way to gain root privilege in linux (Android) is by typing: su -
To tell if you have are root, you should see # where your user name is in the command window.
Once you are done finding the path, you need to exit the adb shell in order to make contact with your PC, so just type exit. Only then you can start using "adb pull".
by the way, its "adb pull /data/media/0/TWRP/ \home\username\backup\"
Rememer in linux (Android), it's case sensitive.

OK, I see my mistakes now. I was not exiting adb shell when typing adb pull. Anyway, thanks to your help, everything is working correctly now. Thank you again, I really appreciate it. Now I can flash the 4.4 update safely.

eksasol said:
If you are using Ubuntu or linux, typing 'find' only search what is in your PC. You get permission denied because you want to search in a root directly that required root permission.
...
by the way, its "adb pull /data/media/0/TWRP/ \home\username\backup"
Rememer in linux (Android), it's case sensitive.
Click to expand...
Click to collapse
Thanks for helping me re-learn that linux (Android) is case sensitive