Since now i was surfing the Net using wi-fi via my modem at home or at work.
Since last Sunday though, i get wi-fi connection to both my modems, but for some reason i cant get an internet connection. For sure the problem is not on my wi-fi modem cause i can get internet connection when using my laptop. Any ideas would be appreciated.
SOLVED ....
how did you solve your problem ... i have the same... thank's
Accidentally both of my wi-fi modems at home and at work were problematic
Related
Hello,
Im having major issues getting my O2 Xda Minis working on wifi.. Anyone got it working on this.. im havin awful problems configuring it to browse via wifi.. When i go to the comms manager it picks my netgear up but refuses to connect to it.. ive tried with WEP and WPA-PSK encryption but its just not having it.. any ideas?? does it even work with the netgear DG834!!
cheers
faddy
I have mine working with a Netgear 624. The problem may be that you need to upgrade your wireless router ROM for support. EDGE is good enough for me, so I dont use the WiFi too much. it is nice to have. Also if your wireless is a G make sure you have the registry hack for it.
shouldn't have to do anything at all. I turned my mini s on and it immediately picked up my wireless netgear modem router DG834G and I was surfing straight away. Don't advise you to upgrade rom thats a load of crap! sure to end in disaster imo just take a look at the number of probs people have on here when they do that.
Have you set it up for LAN connection?
You should have a shortcut to your conections manager on the bottom taskbar. Check you have the wireless connection activated
select Start, settings, connection, Lan and tell us what your settings are ?
Mine has
SSID netgear
Mode Infrastructure
BSSD 00-09-5b-CE-35-**
TX Rate auto
channel 11
signal good
Hi I have similar issues with WIFI and my netgear.
All is as above but on CH 6 and different BSSID
It seems to connect OK then with strong signal etc but then i try and go to a web page and its slow or doesn't find it.
Then another time its as fast as hell with no problems.
Checked all settings on Netgear and on MDA Vario and all seem to be ok.
Any ideas please
At the moment just connected. surfing via WIFI very fast for 7 pages now come to a dead stop but still have strong connection.
:x
I meant to upgrade the ROM on the Netgear router, not the MDA. At least check your router help section for possible conflicts and issues.
hi all...
i just purchased a mda vario 2 and i seem to be having problems connecting to internet explorer and msn messenger via wifi. i have set up the wifi connection and it all shows that i am connected. but it just doesnt find any pages or connects to my messenger. any ideas guys? i know most of the topics on here are to do with some form of connection problem or what not.... so i will appreciate any advice.
settings->connections->Connections->advanced->sellect network
odd ms havent addres'd this a long time agoe judging for how many people who ask this question
but then guess it's the same thing for pc users who wanna change between their internet access between wifi, nic and modem
I don't think that this is the issue because my wm5 os seamlessly switched from wifi to gprs.. I see the same issue where I can access the new through the gprs setting but not through the wifi when connected to an access point. I know that the wifi accesspoint works cause I can access it on my laptop. I think it has to do with a registry setting..
I have had intermittant problems with tethering my laptop via an 8525 since the release of the att2.15 rom. sometimes it would work correctly, sometimes intermittantly, sometimes not at all. After trying numerous combinations of proxies on and off, and various connection settings, I have finaly isolated what i believe to be the problem. When my wifi adaptor is turned on, IE on the laptop appears to prefer to connect to the internet via wifi instead of the usb connection to my hermes device. I do not have an internet connection on the wifi router/hub at my home. Is there a simple explanation for this that one of you network gurus could educate me with? Does anyone else experience this?
There is no broadband access at my residence (rural area) other than satellite or cellular. The wireless router is functioning only as a network for several computers and printers at my home. It is a hassle to lose my tethering connection every time i need to access wifi to print, or get data from another machine.
Any info would be appreciated.
I attached poll because i wondered how often people are using this functionality.
mthomas,
I just flashed up to the 2.15 ROM last night. Internet Sharing would never stay running on my laptop. I had my wireless card active on the laptop as well. It worked fine before I updated the ROM.
Edit:
I turned off my wifi card and still have the problem. After a few minutes of internet sharing, my laptop cannot recognize the the phone.
I have a D-Link G604T wifi modem. it was fine for my G1 connect to its wifi and connnect to the internet. But then I moved out. That modem can't be used with the new network provider so I had to use the normal modem which the telco gave me.
I wanna have wifi so I connect that normal modem to my D-Link one and use my D-Link to brocast wifi. The the problem happened. 2 of my laptops and a netbook are all able to connect to the wifi and the internet but my G1 and my Touch Pro can connect to the wifi but not the internet. The wifi signal is full.
Any ideas?
Thanks heaps...
khoaitaychienvn said:
I have a D-Link G604T wifi modem. it was fine for my G1 connect to its wifi and connnect to the internet. But then I moved out. That modem can't be used with the new network provider so I had to use the normal modem which the telco gave me.
I wanna have wifi so I connect that normal modem to my D-Link one and use my D-Link to brocast wifi. The the problem happened. 2 of my laptops and a netbook are all able to connect to the wifi but my G1 can't as well as my Touch Pro.
Any ideas?
Thanks heaps...
Click to expand...
Click to collapse
What is the security of the AP? WPA2/1 Enterprise? Because that would be your problem...
Sorry, I edit a bit.
2 of my laptops and a netbook are all able to connect to the wifi and the internet but my G1 and my Touch Pro can connect to the wifi but not the internet. The wifi signal is full.
I used WEP for the sercurity. I tried without sercurity and it still doesnt work.
khoaitaychienvn said:
Sorry, I edit a bit.
2 of my laptops and a netbook are all able to connect to the wifi and the internet but my G1 and my Touch Pro can connect to the wifi but not the internet. The wifi signal is full.
I used WEP for the sercurity. I tried without sercurity and it still doesnt work.
Click to expand...
Click to collapse
Huh.
What IP address is your G1 resolving and does it correlate to your routers settings?
Can you try to reset your router to factory default settings?
GenericNode said:
What IP address is your G1 resolving and does it correlate to your routers settings?
Click to expand...
Click to collapse
How to check what IP my G1 is resolving?
And I did do a factory reset to my modem but it didnt help
Perhaps, you should "forget" the connection, then establish a new connection.
oh, that was the first thing I did. Thanks anyway!
hello, any other ideas? I called for help... help... help
You might want to look in the modem's wifi settings for a "Short/Long Preamble" setting and set it to "Long" if it isn't already.
I had the same problem with d-link DI-714P+.Changing transmission rate to 1-2-5.5-11(Mbps) helped me.
Im facing a very stange problem with my phone.
I have wifi at home that i can connect and surf the net with my laptop at any time with no probs.
With my HTC i do get connected but i cannot surf the internet, unless i do a reset of my wifi modem. Now when i do reset and start surfing the net, and disconnect, in a few hours if i do try to get connected, i do get the same problem.
The thing is, i can get connected and do a wb surf at any other wifi spot secured or not, with no problems at other places...
My modem was checked and it was found to be in perfect operating condition.
Any help or suggestions would be appreciated.
security settings i had the same problem