Related
When I turn it on in the morning it goes into recovery mode I then select the reboot and it boots up and I'm good. I turn it off at night and charge it then when I turn it on again its in recovery mode. I was rooted and had bootstrapper but I do not have bootstrapper any more but still rooted. I deleted every file and everything that was related with bootstrapper. Please help me and I'm a noob at some of this stuff.
Sent from my DROIDX using XDA App
Most will tell u this is a blessing z better to always boot into recovery than to ppotentially not boot at all one day. If you TRULY want to remove bootstrap completely, google "completely remove droid X bootstrap"
The process involves renaming a logwrapper file that bootstrap had renamed, and deleting the one created by bootstrap
Sent from my DROIDX using XDA App
I agree that its not a problem but still don't want it. Can you please tell me how to do what you said. I have no clue in how to do that. As simlp as possible please and thank you
Sent from my DROIDX using XDA App
Ok... Here goes:
1) connect your phone to ur pc in charge only mode. Makr sure it is recognized by adb
A) open command prompt and type "adb devices" (hit enter, your phone should show up)
2) in the command prompt, type "adb shell" (press enter)
3) type "su" (press enter)
4) type "mount -o rw, remount /dev/block/mtdblock4 /system" (press enter)
5) type "cp /system/bin/logwrapper.bin /system/bin/logwrapper"(press enter)
6) type "adb reboot" (press enter)
Bootstrap should now be completely removed.
Note: all text in quotes is just what you should type...do not include the quotation marks when entering commands.
Disclaimer: I take no reaponsibility if you mess up your phone. Typing these commands incorrectly CAN mess up your phone. By following thesr directions, you do so at your own risk.
Sent from my DROIDX using XDA App
One question about adb you said it will recognize it. Is it on my phone or is it something that I need to installed. That's the only thing I'm a little confused on everything else I'm good on.
Sent from my DROIDX using XDA App
Adb is the driver interface between your computer and your phone. You will need the latest motorola drivers installed on ur computer. Adb is on your computer
Sent from my DROIDX using XDA App
Sorry for the stupid questions but is adb going to pop up on my computer when I plug my phone in or is it something im going to need to find. Again thank you.
Sent from my DROIDX using XDA App
spacecasespiff said:
Sorry for the stupid questions but is adb going to pop up on my computer when I plug my phone in or is it something im going to need to find. Again thank you.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Here is a way to tell if you have adb drivers installed.
1) plug in your phone via usb to your computer.
2) open a command prompt. Type "adb devices" and press enter. (you don't need the quotes)
If it returns text that looks like " device 05842688788" adb is working correctly. The random numbers will be unique to your phone.
Sent from my DROIDX using XDA App
actually if this continues and you have koush's droid x bootstrapper open it and click the first option and give it superuser permission and it should stop
ok i pluged in my phone and put it on charge mode now I clicked on the start botton on my computer brought up the search bar and typed in command prompt. Is that correct. I then entered adb devices and i said it was not reconized as and external device. now im not sure if that is what i was sopposed to do. I think i was expecting something to just pop up. This is the only thing that i dont know how to find. You say its on my computer but where do i find it.
some people who dont know what theyre doing in the first place shouldn't start....smh just saying
Funnyface19 said:
some people who dont know what theyre doing in the first place shouldn't start....smh just saying
Click to expand...
Click to collapse
Eh... Yes and no. he wants to learb, and we all had to start somewhere.
Spacecase:
You need to download and install the android sdk. Google this and post back when you have it installed =)
Sent from my DROIDX using XDA App
So how am I going to learn how to do something if I don't start some where I just don't wake up and go " I know how to do it" no one told me about the sdk and now I know thank you. It will be tomorrow before I do any more.
Sent from my DROIDX using XDA App
I downloaded the ask and have no clue inn how to use it. I click on the ask within the file it then brings up a black menu then wants me to download all sorts of stuff. The black box is where I type in the stuff but it wont let me type anything. Is this the only way to fix my problem
Sent from my DROIDX using XDA App
spacecasespiff said:
I downloaded the ask and have no clue inn how to use it. I click on the ask within the file it then brings up a black menu then wants me to download all sorts of stuff. The black box is where I type in the stuff but it wont let me type anything. Is this the only way to fix my problem
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Space,
I will need some time to try and put together some steps for you.
My suggestion would be to be careful with modding your phone. I feel like you may be in a little over your head. I do not say this to belittle you, but merely out of concern. I don't want to see ur phone break on you, and you not have the means to fix it yourself, that is all.
I am glad you have a desire to learn what you want to, but be careful, as these tools can also cause more harm than good. I will try and get you some info to set you straight!
Sent from my DROIDX using XDA App
Can't you just use root explorer to delete the hijack file and modified logwrapper, then rename logwrapper.bin to logwrapper? Instead of using all the sdk stuff?
Sent from my DROID2 using XDA App
spaceman4 said:
Can't you just use root explorer to delete the hijack file and modified logwrapper, then rename logwrapper.bin to logwrapper? Instead of using all the sdk stuff?
Sent from my DROID2 using XDA App
Click to expand...
Click to collapse
Yes! If you've purchased root explorer.... So kinda has a caveat there! But definitely a recommended program if you know what you are doing with root privileges...
Just posting a few files for a tutorial I am typing up to come later...
GUIDE PART I:
Ok, here are the steps for setting up the sdk, getting rooted, and all that good stuff... have a feeling I will be making this into a new thread...perhaps....
SDK:
First off... you will want to go to the following site to download the sdk:
http://developer.android.com/sdk/index.html
Grab the following download: android-sdk_r08-windows.zip
I saved it to C:\sdk (i created a folder called SDK right at the root of C: drive). When it finishes, unzip this using 7zip (or any other unzip program you like) to the sdk folder. When it is finished unzipping, you should have a folder called "android-sdk_r08-windows". If you open up that folder, you will find a folder called "android-sdk-windows". Open this folder up and double click on the "SDK Manager.exe". This will open up a window, and bring up additional windows, one of which will ask you to "choose packages to install". You can download any or all of them. I recommend downloading the following:
• Android SDK Platform-tools, revision 1 (the top-most download)
• SDK Platform Android 2.3, API 9, revision 1
• SDK Platform Android 2.2, API 8, revision 2
• USB drivers (I don't think this shows up in the latest version of the sdk's first download window. I believe it is found if you go to the available packages section the "Android SDK and AVD Manager and expand the 3rd party section....but if you happen to see it in there...grab it)
This should be sufficient for now. All packages are accepted by default. If you do not wish to download all of them, simply highlight each one (one at a time) and then click the reject button towards the bottom middle of the window. When you have selected the packages you wish to download, click the install button.
After this has installed, you now have the Android SDK installed on your machine. You can close all windows related to the SDK, as we don't actually need to do anything with it, it simply has tools within it that we will need later. (This is where the adb command originates from. There is an adb.exe tool in the "tools" folder of the sdk install, but we will get to this later).
Now you will want to go to your desktop (or anywhere you have a shortcut or icon for My Computer), right click on My Computer, and select properties. Under the "advanced" tab of the window that opens, you should see a button at the bottom that says "environment variables". Click on this, and then find the "Path" variable under System Variables NOT user variables. Click Edit and go to the end of the "Variable Value" field. You will want to make sure there is a semicolon ; at the end of this before typing any additional info. You will want to add the full path of your android SDK install. For example, if you followed my example for download/saving/extracting/installing above, you would type the following information into the end of the "Variable Value" section:
C:\sdk\android-sdk_r08-windows\android-sdk-windows\tools
If you installed to another location, be sure to type the correct path to the "tools" folder within your installation of the Android SDK. Then click the OK button, and close any windows that were opened from adding to the "path variable".
Droid X Drivers
This section is a little more difficult to explain, as there are so many variables depending on what operating system you are running (windows XP, Windows Vista, Windows 7, etc). and whether or not you are running a 32-bit or 64-bit instance of your chosen Operating system.
Here is one link for Droid X drivers:
http://www.verizon-phones.org/verizon-motorola-droid-x-usb-drivers-pc-charging-drivers-download.html
I simply googled Droid X drivers, I'm sure this isn't the best link, but just for example I'm throwing it out there. If you google Droid X USB drivers <your operating system> you should be able to find the drivers you need, as well as help and instructions on how to get everything working.
Once you get the usb drivers installed, you will want to connect your Droid X to your computer. If it is recognized, you will get a notification in your drop down bar on your phone. On your phone, press on the USB connection in the drop down menu, and select "charge only". Next, open up a command prompt on your computer. Type the following in and hit enter:
adb devices
You should see something simiilar to the following come up if everything is configured correctly:
C:\>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
015A882315005010 device
If you see something similar to what I have above... then ADB is working correctly, and we can continue! Now we will move on to getting your device rooted! You will want to grab the z4root.apk that I have attached earlier in this thread and download it onto your computer. We will now test out if adb is indeed working! Save the z4root.1.3.0.apk and put it in the "tools" folder of the sdk we downloaded earlier. Now open up a new command prompt (or use the one we opened earlier if you haven't already closed it!) Change directories to the "tools" folder of the sdk:
If you installed the SDK where I used in my example.... type the following:
cd C:\sdk\android-sdk_r08-windows\android-sdk-windows\tools (press enter)
type the following: adb install z4root.1.3.0.apk (press enter)
You should now see the following:
C:\android-sdk-windows\tools>adb install z4root.1.3.0.apk
1833 KB/s (978414 bytes in 0.521s)
pkg: /data/local/tmp/z4root.1.3.0.apk
Success
z4root and ROOTING
If you get all of this, you have now installed a package using adb and we know the interface works. If you don't want to have to mess with this method of installing, you could also download "Astro File Manager" from the android market. You would then need to save z4root.apk to your sdcard of your Droid X. Then open the Astro program and browse to your SDcard and file the z4root.1.3.0.apk. Press on the .apk file and it should come up with a box that says something similar to "open with app installer" or "app manager"... don't recall exactly what it says, but should be something similar to package management or install of some sort. After pressing on that, you should see an install button. Press on that to install z4root.
Now that z4root is installed, you will want to go to your application list on your phone and press on the z4root to open the application. Press on the permanent root button and wait! This process may take a while, and your phone will reboot, but when it does, you are now rooted.
Removing BOOTSTRAP COMPLETELY
If you would like to completely remove Droid X bootstrap from your phone, here is what you need to do:
1) connect your phone to ur pc in charge only mode. Make sure it is recognized by adb
A) open command prompt and type "adb devices" (hit enter, your phone should show up)
2) in the command prompt, type "adb shell" (press enter)
3) type "su" (press enter)
4) type "mount -o rw, remount /dev/block/mtdblock4 /system" (press enter)
5) type "cp /system/bin/logwrapper.bin /system/bin/logwrapper"(press enter)
6) type "adb reboot" (press enter)
Your phone will reboot after typing adb reboot, and may take a little bit longer to boot the first time after bootstrap is removed (it may not, I just haven't gone through this process in a while).
Bootstrap should now be completely removed.
Note: all text in quotes is just what you should type...do not include the quotation marks when entering commands.
Disclaimer: I take no responsibility if you mess up your phone. Typing these commands incorrectly CAN mess up your phone. By following these directions, you do so at your own risk.
Installing Droid X Bootstrap
You can grab this .apk file from this thread as well, as I have it posted in one of my previous posts. You will then install this .apk file the same way that you installed z4root. Obviously if you are using the adb command prompt method, you will want to replace z4root.apk with the full name of the droid X bootstrap apk; if you are using a file manager or installer, just follow the same instructions as before as well.
With the bootstrap installed, you are now able to take backups and restore them as well in the event your phone has problems.
There will be more to come...but it's late, and I have already type 4 pages worth of text into Word already... Add 8 hours of server management to this... equals one fried brain...gonna get some sleep.
I know I was over my head a little and did my home work about how to fix any problems that I may encountered but didn't think that I would need to use adb. I know how far I can go and be ok now. I greatly appreciate what you are doing for me. I will get back on my computer when im done at work. I seem to have the right file downloaded so im good there. I will let you know how it goes. Again thank you. Im done messing with my phone and I find out that it runs great and is quick even with no roms or tweeks. Best phone I've owned.
Sent from my DROIDX using XDA App
I ordered my DX earlier today and should have it tomorrow afternoon. (yay!)
I'm coming from the LG Ally, which I played around with quite a bit as far as root/roms go. I ended up bricking it when the Froyo update came out trying to get from 2.1 to one of the new 2.2.1 roms.
I've seen a lot of stuff about the DX and it looks like a lot of progress has been made (yay, again!). I love the look of Gingerbread, so I'd probably look into flashing one of the roms that supports a GB theme (Liberty looks cool!), but I don't want to run into trouble when the official GB release comes out.
So, how hard is this on the DX? What are the general steps? What in the world is a SBF?
Any sort of basic noob-friendly introduction would be greatly appreciated!
Thanks!
Here is a bunch of stuff I have put together for various people that should get you started:
Ok, here are the steps for setting up the sdk, getting rooted, and all that good stuff... have a feeling I will be making this into a new thread...perhaps....
SDK:
First off... you will want to go to the following site to download the sdk:
http://developer.android.com/sdk/index.html
Grab the following download: android-sdk_r08-windows.zip
I saved it to C:\sdk (i created a folder called SDK right at the root of C: drive). When it finishes, unzip this using 7zip (or any other unzip program you like) to the sdk folder. When it is finished unzipping, you should have a folder called "android-sdk_r08-windows". If you open up that folder, you will find a folder called "android-sdk-windows". Open this folder up and double click on the "SDK Manager.exe". This will open up a window, and bring up additional windows, one of which will ask you to "choose packages to install". You can download any or all of them. I recommend downloading the following:
• Android SDK Platform-tools, revision 1 (the top-most download)
• SDK Platform Android 2.3, API 9, revision 1
• SDK Platform Android 2.2, API 8, revision 2
• USB drivers (I don't think this shows up in the latest version of the sdk's first download window. I believe it is found if you go to the available packages section the "Android SDK and AVD Manager and expand the 3rd party section....but if you happen to see it in there...grab it)
This should be sufficient for now. All packages are accepted by default. If you do not wish to download all of them, simply highlight each one (one at a time) and then click the reject button towards the bottom middle of the window. When you have selected the packages you wish to download, click the install button.
After this has installed, you now have the Android SDK installed on your machine. You can close all windows related to the SDK, as we don't actually need to do anything with it, it simply has tools within it that we will need later. (This is where the adb command originates from. There is an adb.exe tool in the "tools" folder of the sdk install, but we will get to this later).
Now you will want to go to your desktop (or anywhere you have a shortcut or icon for My Computer), right click on My Computer, and select properties. Under the "advanced" tab of the window that opens, you should see a button at the bottom that says "environment variables". Click on this, and then find the "Path" variable under System Variables NOT user variables. Click Edit and go to the end of the "Variable Value" field. You will want to make sure there is a semicolon ( at the end of this before typing any additional info. You will want to add the full path of your android SDK install. For example, if you followed my example for download/saving/extracting/installing above, you would type the following information into the end of the "Variable Value" section:
C:\sdk\android-sdk_r08-windows\android-sdk-windows\tools
If you installed to another location, be sure to type the correct path to the "tools" folder within your installation of the Android SDK. Then click the OK button, and close any windows that were opened from adding to the "path variable".
Droid X Drivers
This section is a little more difficult to explain, as there are so many variables depending on what operating system you are running (windows XP, Windows Vista, Windows 7, etc). and whether or not you are running a 32-bit or 64-bit instance of your chosen Operating system.
Here is one link for Droid X drivers:
http://www.verizon-phones.org/verizon-motorola-droid-x-usb-drivers-pc-charging-drivers-download.html
I simply googled Droid X drivers, I'm sure this isn't the best link, but just for example I'm throwing it out there. If you google Droid X USB drivers <your operating system> you should be able to find the drivers you need, as well as help and instructions on how to get everything working.
Once you get the usb drivers installed, you will want to connect your Droid X to your computer. If it is recognized, you will get a notification in your drop down bar on your phone. On your phone, press on the USB connection in the drop down menu, and select "charge only". Next, open up a command prompt on your computer. Type the following in and hit enter:
adb devices
You should see something simiilar to the following come up if everything is configured correctly:
C:\>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
015A882315005010 device
If you see something similar to what I have above... then ADB is working correctly, and we can continue! Now we will move on to getting your device rooted! You will want to grab the z4root.apk that I have attached earlier in this thread and download it onto your computer. We will now test out if adb is indeed working! Save the z4root.1.3.0.apk and put it in the "tools" folder of the sdk we downloaded earlier. Now open up a new command prompt (or use the one we opened earlier if you haven't already closed it!) Change directories to the "tools" folder of the sdk:
If you installed the SDK where I used in my example.... type the following:
cd C:\sdk\android-sdk_r08-windows\android-sdk-windows\tools (press enter)
type the following: adb install z4root.1.3.0.apk (press enter)
You should now see the following:
C:\android-sdk-windows\tools>adb install z4root.1.3.0.apk
1833 KB/s (978414 bytes in 0.521s)
pkg: /data/local/tmp/z4root.1.3.0.apk
Success
z4root and ROOTING
If you get all of this, you have now installed a package using adb and we know the interface works. If you don't want to have to mess with this method of installing, you could also download "Astro File Manager" from the android market. You would then need to save z4root.apk to your sdcard of your Droid X. Then open the Astro program and browse to your SDcard and file the z4root.1.3.0.apk. Press on the .apk file and it should come up with a box that says something similar to "open with app installer" or "app manager"... don't recall exactly what it says, but should be something similar to package management or install of some sort. After pressing on that, you should see an install button. Press on that to install z4root.
Now that z4root is installed, you will want to go to your application list on your phone and press on the z4root to open the application. Press on the permanent root button and wait! This process may take a while, and your phone will reboot, but when it does, you are now rooted.
Removing BOOTSTRAP COMPLETELY
If you would like to completely remove Droid X bootstrap from your phone, here is what you need to do:
1) connect your phone to ur pc in charge only mode. Make sure it is recognized by adb
A) open command prompt and type "adb devices" (hit enter, your phone should show up)
2) in the command prompt, type "adb shell" (press enter)
3) type "su" (press enter)
4) type "mount -o rw, remount /dev/block/mtdblock4 /system" (press enter)
5) type "cp /system/bin/logwrapper.bin /system/bin/logwrapper"(press enter)
6) type "adb reboot" (press enter)
Your phone will reboot after typing adb reboot, and may take a little bit longer to boot the first time after bootstrap is removed (it may not, I just haven't gone through this process in a while).
Bootstrap should now be completely removed.
Note: all text in quotes is just what you should type...do not include the quotation marks when entering commands.
Disclaimer: I take no responsibility if you mess up your phone. Typing these commands incorrectly CAN mess up your phone. By following these directions, you do so at your own risk.
Installing Droid X Bootstrap
You can grab this .apk file from this thread as well, as I have it posted in one of my previous posts. You will then install this .apk file the same way that you installed z4root. Obviously if you are using the adb command prompt method, you will want to replace z4root.apk with the full name of the droid X bootstrap apk; if you are using a file manager or installer, just follow the same instructions as before as well.
With the bootstrap installed, you are now able to take backups and restore them as well in the event your phone has problems.
Thanks for the reply, but it's actually pretty confusing...
To install z4root, do I NEED to do any of those adb steps or can I just sideload it? I'm not sure if you're telling me to do both of those steps or just either/or. Sideloading is much easier, if it's an option.
And as far as the bootstrap goes - am I removing the original bootstrap and then installing the apk you attached to replace it with a custom bootstrap? Is this different than a custom recovery?
Also, what are SBFs and how do they fit into all of this?
Thanks!
lextex said:
Thanks for the reply, but it's actually pretty confusing...
To install z4root, do I NEED to do any of those adb steps or can I just sideload it? I'm not sure if you're telling me to do both of those steps or just either/or. Sideloading is much easier, if it's an option.
And as far as the bootstrap goes - am I removing the original bootstrap and then installing the apk you attached to replace it with a custom bootstrap? Is this different than a custom recovery?
Also, what are SBFs and how do they fit into all of this?
Thanks!
Click to expand...
Click to collapse
No, you do not have to do it this way. I just used this as an example for something I was doing for someone else, especially since they needed the sdk anyways... Just was practice.
(PS, not sure what you mean by sideloading... sorry just not familiar with the term...) Nonetheless...
You can just download the file, and then use file manager to install the file or any app installer you may normally use. Just make sure that under Settings-->Applications-->Unknown sources, that the check box is marked. Then you should be good to go.
As for bootstrap... You are basically replacing a logwrapper file that tells the phone to boot to Motorola's built in recovery. Koush's bootstrap hijacks this and writes its own logwrapper and allows for the recovery process to be interrupted so backing up/restorying, etc. You can load that apk the same way you do Z4root.
As for SBF files, I'm can't recall what it actually stands for, but it is basically a file from Motorola that allowed their employees to flash a phone back to "out of the box" state in the event that a customer ruined their phone or had issues with it... this goes way back to even the Motorola Razor days I believe... In any event, it is used alongside a program called RSDlite. This program allows you to connect your phone to your computer and flash the sbf files that have been released, and as a result allows you to restore your phone back to a "clean" state in the event that you mess up the /system partition and for other uses as well.
I will be adding more to a basic guide for all things Droid X later this weekend. If you have more questions, feel free to post back. And check out my other post here:
http://forum.xda-developers.com/showthread.php?t=940986
This includes the same info as I posted here already, but should have some more updates this weekend.
Good luck!
new here also.
i thought droid x could not be rooted.
i bought mine in october 2010; it's running 2.2.1
thanks in advance
I am having a bit of difficulty rooting my g2. I am not sure if its related to my os or not but i can not get it to work.
I have followed this and tried it all kinds of different ways.
addictivetips.com/mobile/what-is-adb-and-how-to-install-it-android/[/url]
I can get to my run command after doing all of that and it shows my serial number after typing adb devices but after that i can't enter any info in the sdk run command promt.
I have not been able to gain temp root yet because it won't let me enter the commands. I went to try to re-install java/sdk manager yet again and now it says java is not in the right path.
Any help?
If you're having troubles with ADB, why use it? You don't need ADB anymore to root the G2. It can all be done by placing the files on the SD card and running Terminal Emulator on the phone. You can run any of the prompts from ADB in the phone instead. I rooted my first G2 this way. It took some getting used to coming from a phone with a 1-click root, but it wasn't hard.
Check the Wiki, pretty sure it outlines this method as well.
martonikaj said:
If you're having troubles with ADB, why use it? You don't need ADB anymore to root the G2. It can all be done by placing the files on the SD card and running Terminal Emulator on the phone. You can run any of the prompts from ADB in the phone instead. I rooted my first G2 this way. It took some getting used to coming from a phone with a 1-click root, but it wasn't hard.
Check the Wiki, pretty sure it outlines this method as well.
Click to expand...
Click to collapse
Do you have a link for that method i would be glad to try it but i am not sure what to search for, cant find it under rooting g2 with sd card
Also i am trying to gain permanent root if possible
901-Memphis said:
Do you have a link for that method i would be glad to try it but i am not sure what to search for, cant find it under rooting g2 with sd card
Also i am trying to gain permanent root if possible
Click to expand...
Click to collapse
Yep let me grab a link for you (theres actually a video tutorial I wanna try and find). But basically instead of using ADB to push the files to the correct location, you just have to manually put the files in the right locations on the SDcard, which is where ADB pushes them anyways.
K so I followed this method: http://www.youtube.com/watch?v=tU9zn_BEth4
The files he refers to are in this thread: http://forum.xda-developers.com/showthread.php?t=833965
Now different people have had different issues with this. I personally had some issues where it tells you to run #sync, because my perm root wouldn't stick properly after reboot. If this doesn't work properly, I'm sure someone can help you with your drivers to get ADB working.
I should also say that you don't necessarily have to do this method with the initial temp root via visionary, you can simply do the one outlined in the Wiki for rooting (aka http://forum.xda-developers.com/showthread.php?t=834228 ), but just place the files manually and run the commands in terminal emulator.
If you got the adb devices command to work you are actually in good shape. You are supposed to enter all of the commands from what you are calling the "run command" prompt anyway (the one you used for adb devices).
martonikaj said:
I should also say that you don't necessarily have to do this method with the initial temp root via visionary, you can simply do the one outlined in the Wiki for rooting (aka http://forum.xda-developers.com/showthread.php?t=834228 ), but just place the files manually and run the commands in terminal emulator.
Click to expand...
Click to collapse
Unfortunately this won't work (if you don't want to use ADB, Visionary must be used to get temp root). ADB is needed in order to push the files directly to the phone. If you try copying the files to the SD card first, you won't have the correct permissions to copy the files to the phone in Terminal. You are also not allowed to execute programs directly from the SD card (mounted as noexec), so you can't try to obtain temp root from there. If you want to use the gfree method of rooting without using ADB, I made a guide using Visionary for the temp root here: http://forum.xda-developers.com/showthread.php?t=928160.
But the OP actually has ADB working, so he should be able to use any of the guides.
This is the error i get now if i try to enter anything in the sdk manager run prompt box. Is there some place else i should be entering the commands?
Uploaded with ImageShack.us
901-Memphis said:
This is the error i get now if i try to enter anything in the sdk manager run prompt box. Is there some place else i should be entering the commands?
Click to expand...
Click to collapse
You are supposed to be using the regular command prompt (I think you referred to it as the "run command prompt" earlier). It is the prompt in which you successfully ran the "adb devices" command. That is the only prompt you need to use.
Do i enter commands 1 at a time or all at once?
901-Memphis said:
Do i enter commands 1 at a time or all at once?
Click to expand...
Click to collapse
First off, Yes you enter each line as you see it.
Second just to make sure you are in the right area to enter these commands, to get to command prompt you can either search for it from the start menu or hold the "windows button + R".
That opens your run command from there type in "cmd" and that opens command prompt.
Next make sure your current directory is the one you installed adb into. To get to that you can type "cd C:/...... whatever folder you installed it to."
To make sure my adb is working I usually type "adb devices" and see if my phone shows up.
Good luck
Glad to see someone else from the good ole 901 around here =)
Sent from my HTC Vision using XDA App
Okay does anyone have a better guide to rooting?
I got all the way to pushing all the files on the sd card and running the terminal emulator where it shows forked children, reboots the terminal emulator and then i can not enter /data/local/gfree -f
sync
It wont find that file
901-Memphis said:
Okay does anyone have a better guide to rooting?
I got all the way to pushing all the files on the sd card and running the terminal emulator where it shows forked children, reboots the terminal emulator and then i can not enter /data/local/gfree -f
sync
It wont find that file
Click to expand...
Click to collapse
try pushing the file to that folder again
Re-Tried everything at least 3 times, including pushing the files that didn't go.
I give up Ive spent so much time on this only to have it fail at the most unlikely times.
Will wait for another method to root come available
You could try downloading and installing Droid Explorer. It installs adb and fastboot files in its install folder.
Are you sure you actually pushed all of the needed files to your phone correctly (i.e., no errors appeared when doing so)? Which guide are you following and what were the specific errors you are getting? Once you have temp root, running gfree and obtaining permanent root only takes a few more minutes...
Also, did you try any other guides (like the one I linked to earlier)? If you are waiting for a new method of rooting, you might be waiting for a while (since the existing methods work, I don't know how actively people are working on new methods).
ianmcquinn said:
Are you sure you actually pushed all of the needed files to your phone correctly (i.e., no errors appeared when doing so)? Which guide are you following and what were the specific errors you are getting? Once you have temp root, running gfree and obtaining permanent root only takes a few more minutes...
Also, did you try any other guides (like the one I linked to earlier)? If you are waiting for a new method of rooting, you might be waiting for a while (since the existing methods work, I don't know how actively people are working on new methods).
Click to expand...
Click to collapse
Using this guide
http://wiki.cyanogenmod.com/index.php?title=TMobile_G2:_Rooting
I get an error when i attempt to enter this into the emulator on my phone
adb shell chmod 777 /data/local/gfree
and it doesn't do anything
901-Memphis said:
Using this guide
http://wiki.cyanogenmod.com/index.php?title=TMobile_G2:_Rooting
I get an error when i attempt to enter this into the emulator on my phone
adb shell chmod 777 /data/local/gfree
and it doesn't do anything
Click to expand...
Click to collapse
You are supposed to do that command from your computer. (The instructions state "On the computer, open terminal and type the following commands".) Here, terminal means the command prompt that you've been running all of you other ADB commands from.
If you wanted to run the command from terminal on your phone, you would just type "chmod 777 /data/local/gfree".
You don't need ADB for G2s.
trance2315 said:
You don't need ADB for G2s.
Click to expand...
Click to collapse
Can someone link me a better guide for my G2 so that i can try this 1 more time ?
Maybe a link to the top choices for versions of android to run once i get it rooted?
I've finally decided to try to root my G2 but can't get past the ADB setup. I downloaded the SDK, but when I open the manager and try to install platform tools it goes through the motions and then tells me nothing was installed. When I open a command prompt and type "ADB devices" it doesn't recognize anything. What am I doing wrong??
EDIT: specifically, when I try to install platform-tools it tells me it couldn't create a directory and nothing was installed.
66 people have read this and nobody has any suggestions to help?
i think you miss the 1st procedure....
you must have the unknown resources and the usb debbuging enabled.....
then you can proceed to your super one click rooting.....
I have a problem after rebooting my PC: <Java not found...> Reinstalling doesn't help, adding environment variables too. Any idea?
Just root using the rage/visionary method. No adb needed and very easy to do. Here is the linkhttp://forum.xda-developers.com/showthread.php?t=834228
Sent from my SilverBullet 'HTCDesireZ running CM7'
juvanni said:
i think you miss the 1st procedure....
you must have the unknown resources and the usb debbuging enabled.....
then you can proceed to your super one click rooting.....
Click to expand...
Click to collapse
I don't understand? I'm trying to root following the recommended wiki instructions, and I haven't been able to get adb to work so I haven't gotten past that step.
Are you running windows x64? Cause the android installer has issues detecting java on x64 systems.
When it says 'Can't find java' or whatever the error is, click back, then next again, it should find it the second time around. Well thats what happened for me anyway.
-Nipqer
If you're on froyo just use the app z4 root or universal androot
You can also use superoneclick root 2.11
Its very easy and it only take about 3 minutes
Stewie just said that!
I appreciate the help so far, but my problem is I have gingerbread and everything I've read requires froyo for root, and the only way I've read to downgrade uses ADB, so any non-ADB rooting method still won't work for me. I've followed the "ADB for dummies" thread and the other instruction thread and everything seems fine, but when I type in the first command for the downgrading it says adb isn't a recognized command. Am I in the wrong command prompt? I feel like its probably something really dumb I'm doing or not doing but for the life of me I can't figure it out.
Navigate to the folder adb is in.
Hold shift, right click in the folder (make sure nothing is selected)
select 'Open command window here' (or something along those lines)
Adb should work.
-Nipqer
OK, so I'm definitely in the right folder, I read and followed ADB for Dummies thread. Trying to follow this direction:
"Run the following command to verify the exploit has access to what it needs. (Only the first line is the command. The second line should be the result returned if all goes well.)
Code:
$ adb shell cat /dev/msm_rotator
/dev/msm_rotator: invalid length"
When I type that in, should there be spaces between the "adb" and "shell"? Should there be a space after the command prompt and before "adb"? I've tried several variations of it and it keeps telling me "adb is not recognized as an internal or external operable program or batch file."
ok you need to run the command from the folder with adb.exe in it, type it as adb<space>shell<space>cat<space>/dev/msm_rotator
If you are getting an error search for adb.exe and once found try the command again from this folder,if as you say you are in the right folder then I think you will have to reinstall adb as I just ran the command in the form above and it works so if you still get an error then something has gone wrong with the install
P.S Another way to make sure that adb is working and recognises your phone is to type adb devices, if your phone is attached and recognised then it will return a number
Thank you! I had to uninstall and reinstall the package, I don't know what was wrong but it seems to be working now. Also, I knew I was probably doing something stupid, and I was. I wasn't in the platform-tools directory for my command prompt, I was in the TOOLs directory. Just so I'm clear, every command I type into the terminal should be in the Platform-tools directory, correct?
Now, assuming I can follow all the other directions with no problems, once I get to the downgrade pushing steps, I will lose all my current settings, right? It will be a fresh froyo 2.2 like it came to me originally? Other than using Appbrain to back up my current apps, how else should I make a backup?
Final question, do I need to follow the temp root directions and push the downgrade all at one time? Or can I do the temp root and come back at a later time to push the downgrade?
First problem solved then!
Yes but follow this Step 4
Now we need to update your Path variable. This lets you run adb on your PC from a command window no matter which directory you are in (which makes things a lot easier). If you don't setup your Path, then every time you want to run adb, you will either have to type the whole long pathname where you put adb, or cd to where you've put adb and run it from there (which could be inconvenient if you are transferring files to/from your phone).
On your PC, right-click on "My Computer" and select "Properties". (on Vista, click on "Change Settings"). Go to the "Advanced" tab, then select "Environment Variables". Find the "Path" variable in the list of variables that it shows (you might need to scroll), and then double-click on that entry to edit it. Add the full path of the "tools" and "platform-tools" folders of the SDK to your path. e.g. if the SDK has been installed in "c:\Program Files\android-sdk-windows", then add to your Path "c:\Program Files\android-sdk-windows\tools;c:\Program Files\android-sdk-windows\platform-tools" (Please Note - don't put any spaces between the semi-colon and pathname, otherwise it won't work !)if you want to.
Once done you can use ADB from the command prompt in ANY folder,very handy IMO.
If I was you I would set aside enough time and see it through,no point to temp rooting alone.
Get Titanium backup from the market an absolute essential app with this you can backup,upload to dropbox(Another essential app) uninstall apps and a host of other useful tools.
Read the guide first as well,good luck.
Before we start this you will need a few files, you need jcases pie root, the android sdk and the drivers installed for your device.
I've included his package from his thread.
Now I installed SuperSU first before even starting the root process because root isn't needed to just instal the app itself, it will just close once it's open.
Make sure you enable USB debugging and unknown sources before continuing. Extract the two files pie.jar and root.sh to the folder "platform-tools"
This folder should be on your desktop, at least thats where I put adt-bundle folder at. Once placed in to the folder hold shift and right and select "open command window here" and your command prompt should pop up. Connect your device and make sure you're powered on. Type "adb devices" and you should get an access message on your phone just give your phone the authorization. Type "adb devices" once more to make sure your device is listed.
Now to Semi-root the phone
These are to be entered one by one, just copy and paste them one by one.
adb push pie.jar /data/local/atvc
adb push root.sh /data/local/atvc
adb shell chmod 755 /data/local/atvc/root.sh
adb shell /data/local/atvc/root.sh
Your phone itself should disconnect from your computer (at least thats what mine did) and reconnect.
So far I haven't figured out how to work exposed but busy box and adblock plus and other simple root apps work just fine.
Remember this is a tethered root so if you shut off your phone you will have to redo the process every single time you do a hard reboot. Soft reboots work without problems, so unless your battery dies you really have no reason to restart your phone.
I believe @jcase is the developer of the root method and he has instructions for his method on his thread. You are stealing and violating XDA policies! Please report to any mod
MOTO X
I imagine he thought he was being helpful...but yeah, OP should take the link down, and instead, post a link to @jcase 's thread....unless he has given you explicit permission to re-post his file.
As far as using Xposed, OP, you need to download the latest framework from here.
Next, open the app and select Framework. To install, click the very first option which is "Install/Update". (NOTE: Classical installation mode will not work with this type of root!)
After installing the framework it will prompt you for a reboot. Select cancel and then on the same screen as the Install/Update button select the second to last option labeled "Soft Reboot". This is the only kind of reboot you can do to preserve root!
Please delete my binaries, as i update them from time to time, and the ones here would not be updated.
http://forum.xda-developers.com/moto-x/orig-development/root-4-4-x-pie-motorola-devices-t2771623 is the supported guide, with up to date binaries
super65man said:
Before we start this you will need a few files, you need jcases pie root, the android sdk and the drivers installed for your device.
I've included his package from his thread.
Now I installed SuperSU first before even starting the root process because root isn't needed to just instal the app itself, it will just close once it's open.
Make sure you enable USB debugging and unknown sources before continuing. Extract the two files pie.jar and root.sh to the folder "platform-tools"
This folder should be on your desktop, at least thats where I put adt-bundle folder at. Once placed in to the folder hold shift and right and select "open command window here" and your command prompt should pop up. Connect your device and make sure you're powered on. Type "adb devices" and you should get an access message on your phone just give your phone the authorization. Type "adb devices" once more to make sure your device is listed.
Now to Semi-root the phone
These are to be entered one by one, just copy and paste them one by one.
adb push pie.jar /data/local/atvc
adb push root.sh /data/local/atvc
adb shell chmod 755 /data/local/atvc/root.sh
adb shell /data/local/atvc/root.sh
Your phone itself should disconnect from your computer (at least thats what mine did) and reconnect.
So far I haven't figured out how to work exposed but busy box and adblock plus and other simple root apps work just fine.
Remember this is a tethered root so if you shut off your phone you will have to redo the process every single time you do a hard reboot. Soft reboots work without problems, so unless your battery dies you really have no reason to restart your phone.
Click to expand...
Click to collapse
jcase said:
Please delete my binaries, as i update them from time to time, and the ones here would not be updated.
http://forum.xda-developers.com/moto-x/orig-development/root-4-4-x-pie-motorola-devices-t2771623 is the supported guide, with up to date binaries
Click to expand...
Click to collapse
I try to make a simple guide for people who don't want to dig and they get mad..... If I wanted to take the fame of you would I even have credited you at all? lol Man I had to go to a complete different site in order to learn because I was to lazy to dig through yours. My bad if it upset you man, as for everyone else I could care less, you can't please everyone.
super65man said:
I try to make a simple guide for people who don't want to dig and they get mad..... If I wanted to take the fame of you would I even have credited you at all? lol Man I had to go to a complete different site in order to learn because I was to lazy to dig through yours. My bad if it upset you man, as for everyone else I could care less, you can't please everyone.
Click to expand...
Click to collapse
I did not accuse you of anything, I simply asked that you remove the binary so that I could have a centralized point of distribution, to help prevent distribution of older binaries.
IE if you had took the first release, everyone who used your guide would be back here complaining, and blaming me since I can't update this guide.
Thread closed.
Please use the developer supported thread below.
jcase said:
Please delete my binaries, as i update them from time to time, and the ones here would not be updated.
http://forum.xda-developers.com/moto-x/orig-development/root-4-4-x-pie-motorola-devices-t2771623 is the supported guide, with up to date binaries
Click to expand...
Click to collapse