My head will explode. USB ERROR 107 - Click General

Ok I flashed my device with custom rom after doing the whole root gold card etc etc..
Did modacos custom ROM. But to unlock it using a unlock code I need to put on oranges latest firmware..
Problem is everytime I run it it says ERROR 107. Was working fine before the rom update. Also I have checked all drivers etc etc...Someone please help me get this damm orange firmware onto there. I take it I cant just copt it to SD like with .ZIP files and do it that way?

download the latest orange rom:
http://shipped-roms.com/shipped/Click/
and follow this:
http://forum.xda-developers.com/showthread.php?t=603286
(from the point 17)

im such a thick **** lol sorry from over the dell streak side just doing this with someone so not used to it at all

wait still not working lol

Had to change drivers to My htc instead of ABD and whatever the other one was..hmm odd

Related

image errors when loading new rom please help

downloaded someones rom and it is stuck in start up mode. it stays in boot mode bc some didnt cook there rom right. it just keeps reseting the phone. it will not boot up just the start up screen. i can get it to go to the tir color scream thats it will you help me. tryed to change to a different rom maybe your and it says error 270 the image file is corrupted. i tryed to change it to any rom and it wont. finaly got the phone to load up. the rom wont load up at first with the micro sd card in the phone. try changin it out now that the phone loaded up with out the sd card in. i got it dont know how cook that one up would want anyone else to go through what i just did took all day. ivan has the best and know how to cook. got one of his roms back on my phone. i know his roms dont freeze up the phone on start up screan
First step. Finding what phone type you have, i.e. Herald, Wing, Dopod..etc.
Second step. Find the Original ROM that came with your phone. Do this by going to your manufacturer's site and downloading it with your IMEI number.
Third step is to Flash the Original ROM to device.
Fourth step. Download the HardSPL folder and run the three cab files in that folder and then run the romupdateutility.
Fifth Step. To flash a custom ROM replace the canonyang.nbh image file with the custom .nbh ROM image.
Sixth Step. Run the ROMUpdateUtility again with the new .nbh file.
One other thing.. Don't blame cooks for your inability to flash ROM's..
looked at the tmobile website and the htc website for the orginal rom (for the hearld/wing) that came with my phone which is the wing couldnt find it at eather sites. i know how to flash rom i am not retarted. i am taking a guess that it is better to go back to the orginal rom b4 flashing to another rom.
Yes, you are correct.
I've downloaded the tmobile ROM image for you:
http://www.mediafire.com/?yj1oz2m3mzm
Post back if you need more assistance.
thats right ..cooks are doing a vrey good job over here.. shouldn't blame them ..i too had a similar issue where it would just reboot and go no further ..i used a card reader to put trib's ROM inside and flashed it through SD..everythn's working great ..
annie.bassist said:
thats right ..cooks are doing a vrey good job over here.. shouldn't blame them ..i too had a similar issue where it would just reboot and go no further ..i used a card reader to put trib's ROM inside and flashed it through SD..everythn's working great ..
Click to expand...
Click to collapse
Thank you for your validation and support ^>^
thanks buddy i really couldnt find it any where. works great for a min. it will not load up with out my sd card out after loadin and going through the boot up process i put my sd card back in and after a hour or so it will start doing the same thing reboot. i am just going to stay with the orginal rom then i know that my phone will work everytime and not reboot. unless u got a rom that is better then super kitchen version 4.1.13.61 because that rom must not like my phone. i really like the super kitchen rom cant find andthing like it. just need something with some ram and speed
Try using any of my ROMs, but before you do make sure you HardSPL.
I'm going to move this to General since it has nothing to do with the development of roms.

[SOLVED] 2.1 Rooting issue & GSM Hero (White screen, green htc logo, stuck)

[Solved]
Hi there.
I got hold of this second hand phone.
I dont think its been modified in any way yet.
Last night the phone asked me about doing a update. So i did.
After the green progress bar completed i got to a white screen containing a green htc logo. And its stuck there in a loop.
So... I cant turn my device on... whyyyy? :'(
All i can do is to get into the standard htc recovery.
And into the hboot. Some place there it says:
HERO CVT SHIP S-ON
HBOOT-1.76.0007 (HERO10000)
MICROP-010f
TOUCH PANEL-SYN0104
RADIO-6.35.15.11
Aug 4 2009,19:43:30
I have done a wipe and a hard reset. Still it get this white screen on death. (WSOD) Im sodding of to bed...
You now know that it doesnt have a nandroid backup, and that I cant connect the phone via a usb connection to pc. And I dont have any custom recovery installed.
Ive tried to recover from a offical rom with a update.zip copied with a card reader onto the sd. Ive tried a few. The recovery see's the file. But when i try to install it it says "Verification failed Installation aborted"
Ive tried the recovery-RA-hero-v1.7.0.1.img, but without a usb I cant figure out how. Is there a way around for installing RA with just a sd card?
Please, does anyone have a good solution here.
Or some helpfull info to point me in the right way.
Sincererly,
Thor
See these threads similar,... Should be easy to sort.
http://forum.xda-developers.com/showthread.php?t=786938
and http://forum.xda-developers.com/showthread.php?t=787483
Good morning
Thanks, ive been looking at that.
My Win7 pc wouldnt show the ADB Interface in manage devices.
Only thing that pops up is a disk drive called HTC Android Phone USB Device, USB Mass Storage Device and a USB Composite Device.
Im gonna try this on my windows xp machine later today.
Hope it finds my phone, if not... what can i do?
So you need to update drivers as per the link in those threads,... Have you done that already pal?
Sent from my HTC Hero using XDA App
Hi again
Yes, I followed every step on that RUU driver guide on my win 7. But the drivers doesnt pop up as they should.
So I cant install the correct drivers since it doesnt show.
Halfway solution!
I got a breakthrough.
1. Remove the battery and replace it.
2. Hold volume down/up and tap power button. (htc enters hboot)
3. Taps back (enters fastboot)
4. Connects USB Cable (fastboot changes to fastboot usb)
5. Computer finds device My HTC.
Then i run this:
_HTC Hero_RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver.exe
I got this from the htc pages. The software says i have ROM version 3.32.405.1
So i have a newer one installed then the one they have on web!?
I choose update on the software, now it tries to install 2.73.405.5
I got a half working usb connection now.
Fastboot restarted and changed to RUU USB.
Then i get a Error: 140 / 131 Bootloader version fail.
Can it be that the hard reset ive done messed up the bootloader version.
For me it looks like the phone is still in a new version ROM.
Anyone vise got anything to say about this?
Kind regards,
Thor
Aha,.... Ok, thats probs because the RUU you're using is older than the ROM already installed.
Try this one... RUU_Hero_HTC_WWE_3.32.405.1_R_Radio_63.18.55.06P_6 .35.15.11_release_signed.exe
That is the unbranded ROM,...
Wow
Suddenly everything klicked back into place!
Im past the white screen of death!
That RUU link was flawless for my device.
And the fastboot RUU USB installed everything.
Im back in business.
Much appericated m8
No problem. Now do us a favour and put [SOLVED] into your thread title. Thanks.
So...
Any suggestions on what i should do with it now?
Gotta root it i guess.
Then install recovery RA.
Any suggestions for a good rom to try?
Thanks again,
Thor
theres loads, but my suggestion would be villainrom 12 for a 2.1 sense rom, or froydvillain for a 2.2 rom
Ok
How do i know if i have a 2.1 sense rom or a 2.2 rom?
Or was that a dumb question from me, since you meant to install those?
Im kind of new, just left ye olde nokia behind
lol... Ok,... So you used the 3.32 RUU yeah? That is stock 2.1. If you used the other one, that is 1.5. Use BTDAGs guide in my sig to find out how to flash custom ROMs.
I also recommend Villain 12 for 2.1,... Or Froyd for 2.2. Depends if you like the SenseUI or not. Take a look at both in the Dev section.
Ok
Yes, I definitly want to have the Sense UI.
So then i wanna try out installing a villainrom 12 on a 2.1 sense rom.
Settings - Software Information now says:
Firmware version: 2.1-update1
Baseband version: 63.18.55.06PU_6.35.15.11
Kernel version: 2.6.29-063c4d24 [email protected] #1
Build number: 3.32.405.1 CL191507 release-keys
Software number: 3.32.405.1
This is what i have on it now.
I tried doing the phone software update again, when it asked me again.
Got the same error. So I did the usb install over again. All ok again.
Note: The update it tries out is 3.32.405.2 (5.87MB)
So... can i follow BTDAG's guide from here?
Or do i have to downgrade or update something first?
Guess i have to choose Superuser for Android 2.0~2.2 when i do the rooting with androot.
I got a problem in that guide when typing su in the terminal window.
I didnt get the "Super User Request Prompt" as it told about.
Ive now tried terminal from both usb and the terminal emulator.
WHen i try to do the SU or the flash_image recovery command i get permission denied!?
Without su rights i can do the flash_image recovery /sdcard/recovery.img command, since i need the su permissions.
Thanks again,
Thor
Hi again
I cant seem to get the SU rights i need.
Ive used universal nandroid for the rooting! (it tells its now ok)
But i cant flash in the custom recovery image.
Ive now tried a different approach:
1. Installing the ROM Manager and trying out ClockworkMod recovery(its installs ok)
2. Then I boot into recovery by holding the home(house) and power on, I get the white screen of htc death again and it goes into a black screen with a red triangle and a ! on it.
3. Then I release home and power on.
4. Presses down volume up and taps power on.
5. The hero boots into the standard recovery!?
(I think the way im starting up, are reflashing the recovery. am i right?)
Clockwork also have a "flash RA 1.7 recovery" option, ive tried that one too.
But with the same result...
Any one know about this?
Best regards,
Thor Elvin
Solution for life!
After a lot of surfing i found it!
This great tut worked for my device:
http://www.villainrom.co.uk/forum/s...o-Root-The-2.1-RUU-or-OTA-Update-For-The-Hero
I got a blue carebear in the background, and im making a big grin!
Now im rooted and backed up.
Great thanks to Pulser for a great tut.
Edit: VillainROM12 installed 1
PEACE Y'ALL!!!
QUOTE=thorelvin;8284640]After a lot of surfing i found it!
This great tut worked for my device:
Pulser did...
I got a blue carebear in the background, and im making a big grin!
Now im rooted and backed up.
Edit: VillainROM12 installed 1
PEACE Y'ALL!!![/QUOTE]
Dude, nice that you got sorted. I have kids so Carebears are good to have around. Respect to Carebears, and at the same time it would be cool and revisit the forum and thank Pulser, else thank him here as Pulser_g2 (i think). He sort of wrote, reworked the tut originally from the cdma version here. Sorted me too going 2.1 to 2.2. I had shedloads of fun with roms in between but its only thanks to him.
I guess this could be classed as one of those "Circle of life" philosophy budhist type **** things cuz the answer was really where you started, but for me... its all about takin care of the Carebears....
For the record his contract ends around May so get your Hero fix requests in early...!
Soz Pulser... And massive thanks for the opening to a new dimension for my hero...

[GUIDE] Installing RUU's

mod: If this should be in DHD General, please move it
At the moment, sometimes current RUUs (ROM Update Utility) do not flash from the latest RUU exe - many times it will not recognise the Desire HD.
If you are having this problem, this is how to flash the latest stock RUU.
The latest RUU at the time of writing is 1.32.405.6.
You can download the RUUs from xmoo's thread or from mousey_'s site.
note: This is mainly for stock phones, for vendor-derived ones (e.g Vodafone DHDs in Australia) you will also need a goldcard.
Common Steps
Download the latest RUU (1.32.405.6).
Run it as administrator.
Tick the 'I understand the caution indicated above...' box, and click next.
At this point do not go any further.
Navigate to C:\Users\Ivo\AppData\Local\Temp (Replace my username with yours; AppData is a hidden folder)
You should see one or two folders like this:
{719CE201-7B12-4A13-9AF6-8F359FE69C7B}
Go into the one with dotnetinstaller.exe in it.
Open up the next folder.
Copy rom.zip into another folder (outside of temp).
At this point just Cancel and quit out of the ROM Update Utility.
A) Install through PC
Download and install HTC Sync 3.0 and restart.
Download the 1.15.405.1 Test RUU. It is the only one currently known to find the Android DHD.
Start it the same way as before, get to the
1. Connect the Smartphone to the USB Cable.
step. (but no further)
Again, go to the AppData local temp directory (same as above), and find the folder with dotnetinstaller.exe and inside that, rom.zip
You want to delete the rom.zip (which is the 1.15 version) and replace it with (copy back) the 1.32 rom.zip you copied out earler.
DO NOT UPDATE WITH 1.15 ROM, IT IS NOT DESIGNED FOR RETAIL DHDs.
Now click through the next buttons.
The 1.15 Utility should now be set to update with the 1.32 rom. You will see the version number of the rom at the final step.
Click update and watch the magic happen
B) or Install through Phone
With the rom.zip you copied out earlier, rename it PD98IMG.zip
Copy this onto the root of your microSD card through some means (disk drive, ftp, wireless).
Restart your phone and boot into the bootloader by holding power and volume down at the same time as it restarts.
It should go into the bootloader, take a fair while to check the zip on the sd card, and then ask you if you want to flash it.
Say yes!
Hope this can help some people for whom the 1.32 RUUs aren't working for them
Thanks for putting up this post! I was about to request one last night.
Now if only there could be a similar guide to flashing custom ROMs
To force unroot, I could reinstall RUU 1.32.405.6 from Win7 without problems, a bit longer than updating/reinstalling a WinMo 6.5.x rom (my former HD2), but it went through...
Thanks Ivolol this worked a treat
Appreciate your guide and efforts.
I am running Win 7 64. folowed 1.15 method now running latest 1.32.405.6
Howling Wolf said:
To force unroot, I could reinstall RUU 1.32.405.6 from Win7 without problems, a bit longer than updating/reinstalling a WinMo 6.5.x rom (my former HD2), but it went through...
Click to expand...
Click to collapse
Weird; I tested a couple of RUUs (not as many as xmoo did) and all of them couldn't connect to my phone (whereas 1.15 could).
It'd be interesting to find out what the factors are that cause this. ATM the guide above is what to do if someone finds themselves in the same situation (the current ROMs won't find the phone).
Howling Wolf said:
To force unroot, I could reinstall RUU 1.32.405.6 from Win7 without problems.
Click to expand...
Click to collapse
+1 here, went through the normal RUU process fine just for ****s and giggles. I've extracted the ROM.zip though in case it's needed for future use.
sorry for the noob question..just had my DHD for the last 5 days. I come from galaxy S, and in there whenever we flash a rom all the data gets wiped out.
is it true also when we flash a RUU??
also if I do that...would i still be able to get OTA updates??
nandihno said:
sorry for the noob question..just had my DHD for the last 5 days. I come from galaxy S, and in there whenever we flash a rom all the data gets wiped out.
is it true also when we flash a RUU??
also if I do that...would i still be able to get OTA updates??
Click to expand...
Click to collapse
I haven't got complete knowledge of the entire subject yet, but:
a RUU will completely wipe all user settings / apps. Won't do anything to the sd card though.
An update.zip is akin to an OTA update, it does not wipe user settings.
Flashing with a stock RUU will mean that you can still get OTA updates.
I've tried using the phone method and unable to flash successful. I believe you need a valid GoldCard to use this method.
Can you confirm if the GoldCard is required for doing it with the phone method?
In addition, once the unit (especially our Voda branded one) is flashed with the latest ROM, OTA may not run properly which will result in disabled functionality (as recorded in this thread: forums.whirlpool.net.au/forum-replies.cfm?t=1575514, wifi stopped working). Theory said you'll need a GoldCard to get OTA to work properly (from another thread in XDA).
Thanks.
Great Guide thank you very much. Now i know to flash back to stock now if something gose wrong as iam a noob to android it took some time to work it out even tho it is a simple guide now i wanna know after getting perm root how do i flash a custom rom ? do i need clockwork mod?
tleehm said:
I've tried using the phone method and unable to flash successful. I believe you need a valid GoldCard to use this method.
Can you confirm if the GoldCard is required for doing it with the phone method?
In addition, once the unit (especially our Voda branded one) is flashed with the latest ROM, OTA may not run properly which will result in disabled functionality (as recorded in this thread: forums.whirlpool.net.au/forum-replies.cfm?t=1575514, wifi stopped working). Theory said you'll need a GoldCard to get OTA to work properly (from another thread in XDA).
Thanks.
Click to expand...
Click to collapse
There is a big reason I decided to buy my DHD outright and not through Vodafone
I'm pretty sure that Vodafone's OTAs will be different from HTC's. In order to get OTAs from Vodafone you will need their image on it.
Also with vodafone's ROM installed, I wouldn't think it would accept HTC's vanilla ROM/RUU without going through the entire root process (it would only accept Vodafone signed ROMs). So in order to get onto HTC's ROMs I would think you need to follow http://forum.xda-developers.com/showthread.php?t=841076 before the phone will let you run a HTC RUU on it.
I haven't explored goldcards as I personally have no use for one, but you might also need one by the sounds of it for the Vodafone ROM to let you replace it. (edit: yes it looks like you need one to officially flash from a Vendor ROM to a generic one.)
So this guide is mainly for people with vanilla HTC phones. Although someone has posted a stock rooted Vodafone ROM on the phones so you might be able to use the same techniques outlined here with that.
ssimmmo said:
Great Guide thank you very much. Now i know to flash back to stock now if something gose wrong as iam a noob to android it took some time to work it out even tho it is a simple guide now i wanna know after getting perm root how do i flash a custom rom ? do i need clockwork mod?
Click to expand...
Click to collapse
clockwork mod is useful but not entirely necessary. You might be able to use this guide's method to flash a custom ROM onto it (haven't tried yet), but otherwise I think what you need is a recovery img that will let you upload custom/unsigned ROMs onto it. And also S-OFF I imagine.
ok so i have S-OFF and clockwork mod recovery...
if i have the rom.zip and rename it to PD98IMG.zip and run bootloader.
i shouldnt have any problems flashing this rom??
BTW am using Aus branded Vodafone HDH.
also..IF i flash this rom..would i loose S-Off and clockwork recovery mod??
would flashing this allow me to gain OTA???
nandihno said:
ok so i have S-OFF and clockwork mod recovery...
if i have the rom.zip and rename it to PD98IMG.zip and run bootloader.
i shouldnt have any problems flashing this rom??
BTW am using Aus branded Vodafone HDH.
also..IF i flash this rom..would i loose S-Off and clockwork recovery mod??
would flashing this allow me to gain OTA???
Click to expand...
Click to collapse
If you flash a stock RUU rom.zip then you will loose all custom apps, data, s-off, recovery, etc. It puts it to factory settings. If you are in the business of flashing ROMs then I wouldn't worry about OTA because the developers here will integrate HTC updates as they come out, if they come out
However yes I think if you flashed a stock RUU then you will be able to get OTA. You might still need a goldcard, I'm not exactly sure.
ivolol said:
mod: If this should be in DHD General, please move it
At the moment, sometimes current RUUs (ROM Update Utility) do not flash from the latest RUU exe - many times it will not recognise the Desire HD.
If you are having this problem, this is how to flash the latest stock RUU.
The latest RUU at the time of writing is 1.32.405.6.
You can download the RUUs from xmoo's thread or from mousey_'s site.
note: This is mainly for stock phones, for vendor-derived ones (e.g Vodafone DHDs in Australia) you will also need a goldcard.
Common Steps
Download the latest RUU (1.32.405.6).
Run it as administrator.
Tick the 'I understand the caution indicated above...' box, and click next.
At this point do not go any further.
Navigate to C:\Users\Ivo\AppData\Local\Temp (Replace my username with yours; AppData is a hidden folder)
You should see one or two folders like this:
{719CE201-7B12-4A13-9AF6-8F359FE69C7B}
Go into the one with dotnetinstaller.exe in it.
Open up the next folder.
Copy rom.zip into another folder (outside of temp).
At this point just Cancel and quit out of the ROM Update Utility.
A) Install through PC
Download and install HTC Sync 3.0 and restart.
Download the 1.15.405.1 Test RUU. It is the only one currently known to find the Android DHD.
Start it the same way as before, get to the
1. Connect the Smartphone to the USB Cable.
step. (but no further)
Again, go to the AppData local temp directory (same as above), and find the folder with dotnetinstaller.exe and inside that, rom.zip
You want to delete the rom.zip (which is the 1.15 version) and replace it with (copy back) the 1.32 rom.zip you copied out earler.
DO NOT UPDATE WITH 1.15 ROM, IT IS NOT DESIGNED FOR RETAIL DHDs.
Now click through the next buttons.
The 1.15 Utility should now be set to update with the 1.32 rom. You will see the version number of the rom at the final step.
Click update and watch the magic happen
B) or Install through Phone
With the rom.zip you copied out earlier, rename it PD98IMG.zip
Copy this onto the root of your microSD card through some means (disk drive, ftp, wireless).
Restart your phone and boot into the bootloader by holding power and volume down at the same time as it restarts.
It should go into the bootloader, take a fair while to check the zip on the sd card, and then ask you if you want to flash it.
Say yes!
Hope this can help some people for whom the 1.32 RUUs aren't working for them
Click to expand...
Click to collapse
As I am Newbie of Android and I have noob quesitons. Could you please explain what is RUU and use this for what purpose?
Yeah. I got a goldcard inside of my phone but the bootloader doesn't recognize the P98IMG on my sdcard even though its there for sure. No idea how to fix this
Dr. lele said:
Yeah. I got a goldcard inside of my phone but the bootloader doesn't recognize the P98IMG on my sdcard even though its there for sure. No idea how to fix this
Click to expand...
Click to collapse
How big is ur sd-card, and also what brand. Sometimes this is also a issue....
It's a kingston 8 gb class 4, but thanks for the tipp, I'll try another.
Yep, it was the sdcard xD. It's updating as I type
Carnt I just use the updater on the pc with the Rom? I have tried the method and I don't see a Rom file just a data1 file which is a ear file. I really would like stock ROM on my device
edit: i just used the exe and it installed perfect, so now it should be stock with no root,and sn
cxeka7 said:
As I am Newbie of Android and I have noob quesitons. Could you please explain what is RUU and use this for what purpose?
Click to expand...
Click to collapse
An RUU is an exe which contains the stock 'firmware' from HTC to flash to your device. Basically it will do a full factory reset of your device. It won't wipe your sdcard but it will overwrite everything else.
it didnt asked me for anything on option B) or Install through Phone. i didnt get the option to flash it.

Is my Hero bricked? What should I do?

Hello everyone!
First off I'd like to start by telling you I'm new here and I don't know much about rooting so I'm reffering to you for help... Here is what happened... I have a G2 Hero, running android 2.1. So one day I decided to root it and install a custom rom. I downloaded Universal Androot-1.6.2-beta5 and ran it on my mobile.
Afterwards I formatted my sd card then restarted the device and downloaded rom manager from the market and flashed Clockwork. After this I put CyanogenMod-6.1.0-RC1 in the root dir of my sd card, tried to install it from [HOME] + [PWR] buttons menu and an error saying [status 7] showed up... Now im stuck in an endless bootloop... I cannot sync the device with my computer, cannot hard reset.. I can access Hboot menu but there isnt anything I can do...
What should I do to restore it to stock and then try the whole thing again but with a new rom? Thanks in advance!
Anyone?
Have you tried running an official HTC RUU? They can be found in a thread on the development page
Sent from my HTC Hero using XDA App
you have to search for "RUU for htc hero gsm". There's an official website for that. Download RUU (about 80-90mbytes as i remember) and start it. As i remember you should power your phone in HBOOT mode (VOL DOWN + POWER), connct to PC and run RUU and follow the wizard.
It will flash stock 1.5 android.
After reeboot it should inform you that there's an update, but if you want to flash different recovery, you shouldn't update your phone.
Then you should follow "How To - Root Your HTC Hero in One Click" (can't post links yet).
Ok first of all thank you guys for the help! So I downloaded RUU_Hero_HTC_WWE_2.73.405.66_WWE_test_signed_NoDri ver.exe from the main thread. At first I had some connection problems but then I switched the front panel USB to one of the rear which are 2.0 and continued. Now I'm stuck at a later step. Tried to update it but an error message saying "ERROR[131]: CUSTOMER ID ERROR Please get the correct ROM UPDATE UTILITY and try again" displays. Which RUU would you recommend?
I used official RUU from htc.com site. It just worked for me.
This one is in Polish, but i believe, you will find one in your language or in English
http://www.htc.com/pl/supportdownload.aspx?p_id=283&cat=2&dl_id=671
//edit
You must provide a valid serial number from sticker behind the battery and select a corresponding file. It will be only one i think
//edit2
There's something more about this error 131:
http://androidforums.com/707610-post16.html
Apparently you just used wrong RUU... Try one from prev link.
Ok, soI downloaded RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver from the official HTC website and go past last error but afterwards I encounter another one. This time it is "ERROR[140] BOOTLOADER VERSION ERROR, Please get the correct ROM Update Utility and try again"
Any suggestions this time?
hskiller said:
Ok, soI downloaded RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver from the official HTC website and go past last error but afterwards I encounter another one. This time it is "ERROR[140] BOOTLOADER VERSION ERROR, Please get the correct ROM Update Utility and try again"
Any suggestions this time?
Click to expand...
Click to collapse
You could try the carrier one if you got it from Orange flash the ruu which is for Orange uk
Nope, my phone is from Europe but I dont think I got my cd... I'll sure search for it. Any other suggestions?
Maybe you can find a workaround there:
http://forum.xda-developers.com/showthread.php?t=684504
I am currently trying with this one:RUU_Hero_HTC_WWE_2.73.405.38_WWE_release_signed_NoDriver. But it seems to be stuck on "Sending.....Updating the ROM image on your Android phone" The progress bar on the phone's display is almost complete but wont move anymore. I have waited for 20 minutes now...
EDIT: I finally fixed it! I didn't realise I had to have the same RUU version like my software version. Thought I had to downgrade. Nevermind it's all OK now and it's time to try the whole rooting and custom ROM process again
I want to thank all of you guys that helped me!
Good for you man
Just out of pure couriosity, what rom will U use afrer your phone get rooted?
You have to use your carrier related stock rom/exe. What is your carrier?
Perdita2000
Sent from my Hero using XDA App
I havent decided yet. It will definitely be some Android 2.2 ROM Maybe Elelinux Speedmachine.

[Q] HTC WildFire A3335 Qustion

I have a basic question,
I'm only asking because there's far too much
information available,
on here
and its not easy to find what best fits my
needs.
I have an unlocked A3335 wildfire ( Telstra NextG network 3g version), I'm using it on optus,
my boyfriend was useing it he dowloaded a
font change app for the phone,
but when he did it my phone went in to
bootloop mode.and keep't bootlooping again
and again
all i get is the start up screen,
with yes you guessed it
(Telstra NextG network 3g crap)
All I want to do is try and get my phone from
this bootloop mode and try and recover...
my phone back to how it was.
Its hard to explain,
ok when i go in to the boot screen
i have this on my phone
BUZZ PVT SHIP S- Off
HBOOT-1.01.0002
MICROP-0622
TOUCH PANEL-ATMEL224_16ab
RADIO-3.35.20.10
DEC 27 2010,
17:49:10
and it reads the sd card,
it said the Boot Image. is missing
dont know why a app would take this out
but this is what happen
So Now when i did the fastboot on my phone
it done nothing,
then did the clear storge.
then i did the recovery
it rebooted to a black screen with A
triangle shape with one of these things
! in the middle of it,
but still stuck
I can follow the regular guides for rooting,
can any one help me to get my phone back to
how it was please
And I really don't care about this part much,
but would be nice to have it off the phone
and remove all the telstra junk and restore
the phone back to how HTC would ship it,
(all the junk apps they include could easily be optionally installed from marketplace if you want their crap...)
(obviously I'm in Australia also)
There are so many ROMS and options available,
including the ones from shipped roms
(it wont let me post the link because I'm new).
I just want my phone back to how i got it,
can any one help me please....
please send me a private messages,
with a step by step guide to do so thanks..
Since you are s-off u can use fastboot flash from windows to flash a clockwork mod recovery. After you do that, every thing will be simple. Just download a rom in zip format,put it to sd go to recovery( just do what you have done to see the triangle in blackscreen. Note that if u flash cwm you will no longer see that triangle). Then use your volume down button to reach install zip from SD card. Hit it with joystick press. Choose zip. Install it. Just do a data- factory resetting before you install zip.
I prefer cyanogen mod 7. U may use latest stable or nightly build. Feel free to post any doubt you have. We are happy to help you.
Regards shah.
Sent from my HTC Wildfire using XDA App
thank you so much your a life saver it work't have my phone back now yay
K. Be in touch with xda. Find out more. Make your wildfire yours and not htc's.
Thank u
Sent from my HTC Wildfire using XDA App
well i got some bad news its gone back to how it was,
trying to do the same thing,
could you please give me a step by step guide thanks,
do i need to turn my sd card in to a gold card ?
its formatted to a FAT32
If you have any ideas where to go and get this would be a great help
aussiegirl said:
well i got some bad news its gone back to how it was,
trying to do the same thing,
could you please give me a step by step guide thanks,
do i need to turn my sd card in to a gold card ?
its formatted to a FAT32
If you have any ideas where to go and get this would be a great help
Click to expand...
Click to collapse
nope that gold card image will send to ur email..and u need to copy that gold card image to ur sd card...
Well if the hboot is 1.01.0002 with S-OFF then it must be done using xtc clip. So fastboot flashing shouldn't be working. And u don't need a gold card for S-OFF wildfire .
I would just suggest to flash a stock froyo WWE RUU which also removes the carrier bloatware. If ruu proccess gives errors u can copy the romzip from that ruu and use it with pc49img process from hboot menu. And ofcourse fat32 memory card is must for pc49img process
Sent from my Blade using XDA App
Hey can you explain what happened now? You said that yours is working now before 2 days. ( in second last post). So what happened now? What have you tried with your phone?
And...
So the gold card question, let me explain.
Gold card is just a patch tool, with the help of which you can unlock HTC boot loader , or in detail, you can unlock HTC 's boot loader protection(that's what we call as s-off) , which is commenly locked( that's we call as s-on) , for a user mode phone( a phone that is for sale to normal user), and it is done so because a normal user never need a root permission, over clocking etc. Also user defined kernal,rom,radio updates unless HTC provide them with updates.( and of cource to protect their device and its custom os made by HTC.
So being an s-off device, we can say in simple, unleash the potential of android.( that's what i said, make the device yours and not HTC 's).
And s-off. In can be done using many ways, find them in topic " complete wildfire index " , one of which is using goldcard method. It is also explained in topic/ stickies " downgrade hboot to xxxx". You can download an attached file called buzz downgrade from that topic, and its what you all need.
And about ruu flashing, i think its not a safe one for you, Coz your phone is a3335? Right? If so, original ruu flashing may cause problems with network( called as radio problems), so you can use custom/ safe ruu, instead. Which contains no radio image, check " complete wildfire index" else go for custom os like cm7.
But before all you should mention what you need.
1) r u trying to put custom os, or do you need original os?
2) do you want your phone to be a true android gadget, or just normal phone which is provided by HTC?
3) what kind of user r u? Normal user or a tech junky?
4) r u satisfied with android 2.2 or need 2.3?
Get us the answers, along with your current boot menu( where you find recovery option) details. So that we can help you properly.
That's all dude. Its 2.30 am here in India, so i should wish myself a good night, swtdrmz. Cu ltr.
Sent from my HTC Wildfire using XDA App
showlyshah said:
And about ruu flashing, i think its not a safe one for you, Coz your phone is a3335? Right? If so, original ruu flashing may cause problems with network( called as radio problems)
Click to expand...
Click to collapse
Oops. Completely missed that point, sorry.
But since the phone is S-OFF one can just flash the system.img and boot.img alone from wwe ruu to remove the carrier bloat and to continue on the HTC stock rom (only if u wish to). Same pc49img process here but with only system.img and boot.img along with android-info.txt .
Sent from my Blade using XDA App
bharatgaddameedi said:
Oops. Completely missed that point, sorry.
But since the phone is S-OFF one can just flash the system.img and boot.img alone from wwe ruu to remove the carrier bloat and to continue on the HTC stock rom (only if u wish to). Same pc49img process here but with only system.img and boot.img along with android-info.txt .
Sent from my Blade using XDA App
Click to expand...
Click to collapse
now im lost where do i fine the right one to use do you know how many there are out there this phone is doing my head in i try to flash the system.img and the boot.img and a stock rom and still nothing im ready to give up to be honest
Have you installed clockwork mod recovery? If not do it first. Use fastboot flash from windows or linux, then download latest cyanogen mod nightly and put it in your sd. Then use install zip option from cwm recovery to install cm7. Done. Its what you want. No radio harm will be done unless you flash a radio using any methods.
All info will be available on thread" complete wild fire index" in this forum. Tools, recovery, how to, rom, and every thing else are available in that thread.
Sent from my HTC Wildfire using XDA App
i have all of these things you said here what i dont understand i have tryed this so many times and still dosent work and its abit hard with work as i dont get much time to fix this phone for the past week has given me nothing but a pain in the rear end and its doing my head in...
ok let me show you and try to explain this ok i rooted my phone before so you know its s-off what im trying to do is to get it from the boot looping as its stuck until i put it in to HBoot and did a recovery it stop boot lopping then i did a search and come across this site read and read countless info trying a number of things first so then i did the clear storage then rebooted phone then i got the home screen with yes the Telstra NextG network then i took out the battery then put it back in did the same thing as before got in to HBoot then i read on here to turn the sd card to a fat32 which i did so i read more and more did that they said to do and so on now when i did that i got the home screen with Telstra NextG network then it changed to a black screen with a yes triangle shape with one of these things ! in the middle of it, so then i come here post this on here looking for help then i did what you said to do it work for 2 days then went straight back to how it was then i read the reply's to this done the same thing'y over and over still im with out my damn HTC hunk of junk to be honest this phone has become a big pain in the rear end and has done my head in for over a week i rooted a LG p350 and that hasn't been unlocked until i did it i have never in my life had so much drama with a HTC WILDFIRE A3335 until now i did all my mates smart-phones with no hic up now trying to do my own its like im at the end of my wits i have photos with this so you can see what i get when doing what you said ok the gold card thing'y already did it still phone will not read it as you will see first hand
aussiegirl said:
ok let me show you and try to explain this ok i rooted my phone before so you know its s-off what im trying to do is to get it from the boot looping as its stuck until i put it in to HBoot and did a recovery it stop boot lopping then i did a search and come across this site read and read countless info trying a number of things first so then i did the clear storage then rebooted phone then i got the home screen with yes the Telstra NextG network then i took out the battery then put it back in did the same thing as before got in to HBoot then i read on here to turn the sd card to a fat32 which i did so i read more and more did that they said to do and so on now when i did that i got the home screen with Telstra NextG network then it changed to a black screen with a yes triangle shape with one of these things ! in the middle of it, so then i come here post this on here looking for help then i did what you said to do it work for 2 days then went straight back to how it was then i read the reply's to this done the same thing'y over and over still im with out my damn HTC hunk of junk to be honest this phone has become a big pain in the rear end and has done my head in for over a week i rooted a LG p350 and that hasn't been unlocked until i did it i have never in my life had so much drama with a HTC WILDFIRE A3335 until now i did all my mates smart-phones with no hic up now trying to do my own its like im at the end of my wits i have photos with this so you can see what i get when doing what you said ok the gold card thing'y already did it still phone will not read it as you will see first hand
Click to expand...
Click to collapse
No expert but looks like you have an empty sdcard and system.I think you need to get a rom onto your sdcard (cm7 good choice) and then through recovery apply the rom. Zip and reboot after. DONT DO A WIPE.the telestra screen is just a splash screen which will always load before the system searches for data to load,next would be boot loading screen but yours by the looks and sounds of things does not achieve!! Probably cos its not present due to not having a rom installed.hope I helped if not best of luck. Members are very helpful here and cos you can access hboot I am 99% sure this will be fixed for you. Regards Slymobi.
Sent from my HTC Wildfire using XDA App
i have a rom on my sd card but the thing keeps saying FAILED? NO SUCH FILE FOUND ?
Download this: http://shipped-roms.com/download.ph...5.55.24H_3.35.20.10_release_160191_signed.exe
Enter HBOOT.
Wait until it finishes trying to load a zip file.
Choose FASTBOOT to enter FASTBOOT USB mode.
Run the downloaded file.
It should then install the original HTC rom.
Or maybe try PC49IMG method if you haven't already?
On your PC click start and type in the search box %temp%,
Keep your eye on this folder and doubleclick your ruu, a new folder should appear in temp folder,
Open it and search for rom.zip,
Copy it to your desktop and rename it to PC49IMG.zip then copy to your SD card and boot into hboot, it should find the zip and install.
Sent from my HTC Wildfire using xda premium
@scratches post. I couldn't remember the method but that's exactly how I got my ruu to install so I could revolutionize.
Sent from my HTC Wildfire using XDA App
i have done that already still no go

Categories

Resources