Database Users

Perfect WM and Android Combination. NO ECHO OR SOD! Updated: 8/7/10

First i want to say thanks to all the developers that got involved to make this possible. Their hard work and sleepless nights are greatly appreciated.
I tried so many combinations of ROM's and Radio's that i gave up and nearly lost hope until a friend of mine at work found the perfect combination of Windows Mobile and Android to load on the US Tmobile HD2. Maybe i should buy him lunch tomorrow .
I think many are experiencing the issues i had, soooo.... I wanted to share this information and show you all little lost sheep out there how to get to the light at the end of the tunnel.
If you want to start from scratch, meaning from the factory ROM on the phone, then do what i did and follow the instructions below in the same order i performed them. If you are savvy enough to follow along without starting from a stock ROM, then more power to you. These steps are for the dummies like me who are out there and cant follow instructions.
Again this is for the US-TMobile HD2's. I dont know that this will work for the EU HD2's. Try at your own risk.
Step 1
Install the TMO Stock ROM. Click Here
Step 2
Root your TMO Stock ROM by installing 2.08.HardSPL. Click Here
Step 3
Install Energy's "Stardard-Energy" ROM located on the US TMO forum but for your convenience.... Click Here
Step 4
Install Radio version 2.12.50.02.2. Click Here
Step 5
Copy shubCRAFT's "Android" folder to the root of your SD Card. Click Here
- (I edited the startup file to prevent the "cant access tty; job control turned off " error message, therefore this install should be plug and play.
- When the copy is complete, place the SD CARD back in your phone if not already, and run clrcad & haret from the Storage card.
- You can also use the auto boot loader .cab file on your WM rom to autoload Android. Click Here
Updated: 8/7/10
For those of you who are having issues and don't know how to modify the startup.txt file. Here is a copy of the startup.txt file without the "loop_partition=mmcblk0" command line. Click Here
Just copy the file to the Android folder and overwrite the existing one and you should be all set.
Step 6
Here is a new 1GB userdata.img download link. Click Here
The old one was giving issues with texting. If you guys want a bigger userdata file let me know. This will also fix any download issues from the Market and prevent low disk space errors when attempting to install an application from the SD card.
Update: 8/7/10
Here is a 4GB userdata.img for the ones that wanted a bigger file. Click Here

I'll have to try this. Keep having the static/echo problem no matter what radio I use. Currently I'm running ChuckyROMS and dan1j3l's Froyo build. Got one more radio to try and if that doesn't work, oh well, I'll try this combo.

As far as I remember I am using ChuckyDroid and Radio 12_50.2 and matt latest version and no echo/sod since yesterday and got about 20 hours out of battery life. Must mention I use the phone "alot" so my battery drains accordingly

sudeep62589 said:
As far as I remember I am using ChuckyDroid and Radio 12_50.2 and matt latest version and no echo/sod since yesterday and got about 20 hours out of battery life. Must mention I use the phone "alot" so my battery drains accordingly
Click to expand...
Click to collapse
Wow are you serious 20 hours ????

I'm using:
LEO_Cloudy_1.6 and Radio 2.12.50.02_2
mattc Leo + Froyo w/Sense RC1.4
together with Cloudy AndroidLoader too
Working perfectly, no robotic voice

the new zimage is what kills the echo, nothing magical about it.

Frustrating!
Even with the new zimage, clean SD, I still get robo-voice. I refuse to clean out my stock TMOUS ROM / radio though...there has to be a fix that doesn't require me to do HSPL....(i own a mac...is there an easy way to do HSPL on a mac?)

hobonic said:
Even with the new zimage, clean SD, I still get robo-voice. I refuse to clean out my stock TMOUS ROM / radio though...there has to be a fix that doesn't require me to do HSPL....(i own a mac...is there an easy way to do HSPL on a mac?)
Click to expand...
Click to collapse
U don'nt have to HSPL again to install the Radio, and neither will u lose any data, so just go ahead if an new radio will help resolving the robo-voise

Does flashing the stock tmo rom first really make a difference? I've flashed like crazy to get the best combo but haven't had the stock rom since I first flashed.
No matter what I do I'm still getting massive background noise (mic gain?) downloading energy + shubcraft now, let's see if this does it!

I can't say its perfect... it seems clear... just very low volume.. I do love how well this is all coming along!! what 2 weeks and it almost totally usable ?!?!
us tmo hd2
Radio version 2.12.50.02.2
Energy's "Stardard-Energy" ROM
shubCRAFT's Android build

Cobra2 said:
U don'nt have to HSPL again to install the Radio, and neither will u lose any data, so just go ahead if an new radio will help resolving the robo-voise
Click to expand...
Click to collapse
the robot will keep talkin to u until u dont chage ur tomous HD2 Stock (****) ROM ... just kiddin man .. the robocop depends upon ROM only not radio... before i also tried different radios with STOCK tmobile rom but robotic voice came with all.. but NOW changing to miri later to chuky both rom shown np problem at all except for echo which is not a problem to me as it a problem of the opposite site and somtimes i use the stock headset which get the echo out also... by da way android got far greater audio quality when playin music dont know why... but during calls vice versa

nawcho said:
the new zimage is what kills the echo, nothing magical about it.
Click to expand...
Click to collapse
The man speaks the truth. Try 3rd August version guys.
Sent from my HTC HD2 using XDA App.

tgtoys said:
Does flashing the stock tmo rom first really make a difference? I've flashed like crazy to get the best combo but haven't had the stock rom since I first flashed.
No matter what I do I'm still getting massive background noise (mic gain?) downloading energy + shubcraft now, let's see if this does it!
Click to expand...
Click to collapse
Its not the rom but the audio driver that the rom uses. Look for robotic sound problem thread in this section for the files.
Sent from my HTC HD2 using XDA App.

You know guys, I really gotta say this. I think its really mestup that when you try to download the "Standard-Energy Rom" they give you the option to either pay them for a fast download or suffer through their agravating super slow download that they intentionally made that way for who ever doesnt wanna pay up.
I noticed the "Affiliate Program" they have which for those of you who dont know, it just means that every time someone goes and pays for the "super fast download", there is someone behind the scene getting paid for making you pay. That someone is usually the one who provides the link to that website.
Why am I exposing this? because who ever is doing this should at least have the curtesy to let us know it is NOT free to download and HE will make money when you choose to pay, not just thinking he's fooling people to a comission- which he is.
The last time I tried downloading for free, it took 2 1/2 hours and at the end I got a little "Error" message saying there was a problem downloading and the download could not be completed. - .. as expected for not paying up right?
How do I know this, because I AM an "Affiliate Marketer". I know how this stuff works, but I dont work this way.

has anyone realized this is a emulator .....lmao

JesHD2 said:
You know guys, I really gotta say this. I think its really mestup that when you try to download the "Standard-Energy Rom" they give you the option to either pay them for a fast download or suffer through their agravating super slow download that they intentionally made that way for who ever doesnt wanna pay up.
I noticed the "Affiliate Program" they have which for those of you who dont know, it just means that every time someone goes and pays for the "super fast download", there is someone behind the scene getting paid for making you pay. That someone is usually the one who provides the link to that website.
Why am I exposing this? because who ever is doing this should at least have the curtesy to let us know it is NOT free to download and HE will make money when you choose to pay, not just thinking he's fooling people to a comission- which he is.
The last time I tried downloading for free, it took 2 1/2 hours and at the end I got a little "Error" message saying there was a problem downloading and the download could not be completed. - .. as expected for not paying up right?
How do I know this, because I AM an "Affiliate Marketer". I know how this stuff works, but I dont work this way.
Click to expand...
Click to collapse
so who is going to pay for the hosting that has nothing to do with the developer its the hosting site ur getting there work for free start download and go get some coffee your first post could of been more useful

Jackuuuuu said:
The man speaks the truth. Try 3rd August version guys.
Sent from my HTC HD2 using XDA App.
Click to expand...
Click to collapse
Yeah you got it, thats the only "magical" thing. With the last Radio all Echos are gone and the Bad Backround noises too.
No one must try diff ROM and Radios anymore.
I use the Original 1.66 Stock ROM and Darkstones Desire v5 (my absolute favorit) and with the latest zimage the last Soundproblems are solved.
I only wait for GPS works in the v5, coz than it is the perfect build.

Thank you for this post! Very helpful

hobonic said:
Even with the new zimage, clean SD, I still get robo-voice. I refuse to clean out my stock TMOUS ROM / radio though...there has to be a fix that doesn't require me to do HSPL....(i own a mac...is there an easy way to do HSPL on a mac?)
Click to expand...
Click to collapse
did u check out http://forum.xda-developers.com/showthread.php?t=737936
applies to stock roms also, flash a 2.10 rom

ROMeOS has been updated to v4.17 expressly for Android Compatibility

[Q] Still confused about Android, really don't know what to do?!?!

I'm still really confused. People are telling me to flash a different radio for android... then install Linux drivers or whatever, do I really have to install all this?!!? I thought it was just running Haret.exe and it works...
If anyone has individual guides for these would be great.... I'm really beyond confusion with this.
I basically just wanna dual boot the 2.1 Sense ROM (The best one, with good battery life etc.) and have everything working. If there is a particular guide, or several guides for this and someone could them to me in order I would be so greatful... because I really have no idea what I'm doing.
Also on a T-Mobile UK HD2, if that changes anything.

Just put a build on your SD card download an Android boot loader then run it simple as no need to change radio or anything else
Sent from my HTC Desire using XDA App

If your really having trouble with it, then usually all I'd say is READ all of the stickies, all the info you could ever want on the subject and brings you to being in the exellent position of knowing almost everything. If not, take this link and call me in the morning
http://forum.xda-developers.com/showthread.php?t=732380
I do wish i could leave it there, but the OP of that thread has disappeared and isn't supporting the latest developments, but that tells you to download an Android build a ROM and a radio (oh, and a dual boot program). Those are the core components, If you wanna switch builds, you just change your SDcard whenever you do so desire. But you don't get much information on jacking round with the Kernel, this can provide quick upgrades to hardware (such as.... getting the lightsensor working in the future) without changing builds.
http://forum.xda-developers.com/showthread.php?t=719646
that should give you base knowledge of all things XDAndroid (a few posts down on the second link mind you). Hope this helps

JccageX2 said:
I'm still really confused. People are telling me to flash a different radio for android... then install Linux drivers or whatever, do I really have to install all this?!!? I thought it was just running Haret.exe and it works...
If anyone has individual guides for these would be great.... I'm really beyond confusion with this.
I basically just wanna dual boot the 2.1 Sense ROM (The best one, with good battery life etc.) and have everything working. If there is a particular guide, or several guides for this and someone could them to me in order I would be so greatful... because I really have no idea what I'm doing.
Also on a T-Mobile UK HD2, if that changes anything.
Click to expand...
Click to collapse
Here is the crash course for you...
* It is the best to learn how to get Android on your phone and test different builds yourself for your taste - so, what makes you happy keep that build I guess.
I have T-Mobile USA HD2 am using FroyoStone Series V1 build and everything works just fine. Auto Killer App puts battery in comparable position with my WinMo and therefore I am using now Android full-time for the past week or so - not a single SOD, freeze, etc. - it simply works just fine.
How to get Android on your HD2? Find compatible build for your UK HD2 version by reading stickies and doing a little bit of homework researching xda forum.
Then once you find the build:
1. Download it... it will be packed into archive most likely (rar, zip, 7z, etc)
2. Froyo builds go usually into one folder "Android" - as packed just copy folder Android into the root of your SD card on your phone.
3. Open it up through File Explorer, start/click CLRCAD.exe - you will see no action and that's fine - this makes sure your sound works fine... then, start/click haret.exe...
4. Leave it to boot - first boot is bit longer but it should boot in less than couple of minutes or something like that (depends on the build).
5. DO WATCH what the lines state - if there is anything like "failed to mount, blah blah" or any other possible failure to load something - come back and start searching for solution on these forums... You should be fine (however, I do not offer any guarantee as any of the build makers).
The rest is pretty easy - run Android, play with it and see if you like it...
Note: To change builds, it is very simple... Just delete Android Folder from SD Card root and you are ready to download and install (copy over) another "Android folder" into the root of the build you have downloaded.
Cheers mate!

Okay, so there isn't need for flashing Radio's etc. then? Literally just running the files?
I can't even download the ROM's, not downloading I'll try again later though.

Most of the rom builders recommend upgrading to the most recent radio. There seem to be fewer issues with SOD, robo voice, etc vs older radios. That said, YMMV so try it out with what you have now. If you have problems try to out newer radios or WinMO roms built to run android. Good luck.
Sent from my HTC HD2 using XDA App

There is a "defenite guide to android" on the forum. I was just like you but followed those steps exactly and now.I'm running android no problem. Just make sure you read up on everything. Its not gonna be as simple as dragging and dropping but it isn't extremely hard.
Sent from my Nexus One HD2 using XDA App

im just confused on android . what is the best one to get ?. im running energy dinik rom .
and im just not that sure about it yet . dont want to bugger my phone up tryin a android.

.BetaBoy said:
There is a "defenite guide to android" on the forum. I was just like you but followed those steps exactly and now.I'm running android no problem. Just make sure you read up on everything. Its not gonna be as simple as dragging and dropping but it isn't extremely hard.
Sent from my Nexus One HD2 using XDA App
Click to expand...
Click to collapse
Okay, has anyone got a link to this guide?
Also, how do I change my Radio, and can it harm my device if I do?

the definitive guide to android is here the radio thread here...this helps as well...

JccageX2 said:
I'm still really confused. People are telling me to flash a different radio for android... then install Linux drivers or whatever, do I really have to install all this?!!? I thought it was just running Haret.exe and it works...
If anyone has individual guides for these would be great.... I'm really beyond confusion with this.
I basically just wanna dual boot the 2.1 Sense ROM (The best one, with good battery life etc.) and have everything working. If there is a particular guide, or several guides for this and someone could them to me in order I would be so greatful... because I really have no idea what I'm doing.
Also on a T-Mobile UK HD2, if that changes anything.
Click to expand...
Click to collapse
SIMPLIFIED GUIDE

Need some help with an Andoird build for my dad.

Hi
First off all I want to say: I can probably find everything here in the forum but I'll spend hours and hours reading and most off the time I'll read useless info that I don't need so if you have the knowledge and it just takes 5 minutes to share it please help me out I'll be thankful.
I myself have a HTC legend and have read LOTS off posts before finally rooting and flashing custom roms. Now my dad has asked me if I could help him to get android on his HD2.
He needs to be able to sync his agenda with outlook (for work (Calendar and contacts) I read something about HTC sync should be working on newer kernels is it included in some builds then?), and have a stable build (its not a ROM if I'm correct?) one that he could use for daily use. Don't need anything too special (not even root but its not a problem if it does have root access)
So I've started reading around in the development section and from what I read I don't need to root or flash anything, just extract a zip to the SD and name it Android. Is that correct? (then why do you have special android roms?)
So is there someone who can link me to a good stable (no OC kernels and stuff please) Android Build and tell me if there are known bugs with HD2 builds that don't get mentioned in those threats because they are known as general knowledge.
Thanks in advance
If I could ever help you back with HTC legend problem or something I'll gladly do it for you.
grts
Jonas (sorry for the pour English it's not my main language)
I'm reading topics and If I find answers I'll update this but please if you have the knowledge to help me in a few minutes PLEASE do so.

Never mind found this post: http://forum.xda-developers.com/showthread.php?t=782930
and solved most of my questions looks like its not as fully operating as I thought :s.
So It's not just as easy as unzipping and renaming that would have been too easy.

It isn't very complicated to run android on the HD2. I don't know what feature you suspect isn't working that scared you from attempting. Every feature I could want is working. You also don't need to sacrifice windows mobile if you try android. Give it a shot and post again if you have trouble.

Problem is that I need to root and flash other wm Rom if I want everything to work as it should. Or isn't that really necessary? I'll just try a build and see what it does. Thx for th reply
Sent from my Legend using XDA App

JonasDroid said:
Problem is that I need to root and flash other wm Rom if I want everything to work as it should. Or isn't that really necessary? I'll just try a build and see what it does. Thx for th reply
Sent from my Legend using XDA App
Click to expand...
Click to collapse
if you have to hspl your hd2 depends on your stock radio rom version. it should be a newer one like 2.10 or 2.12 to avoid most issues with android. flashing another winmo rom is only necessary if you have robot voice and/or faster playback of music (just to mention 2 problems)... you don't have anything to loose if you try android from stock hd2. if it's not working fine, you may think of flashing a new radio and/or rom!

So if I unzip the file I can dowload here put it into android folder in the root of my SD, I'm good to go? What about that kernel do I need to flash it??

if he uses it for work then i'd suggest laying off android for now

he could still use the WM? It's just like a program no? So by just removing the folder it would be back to normal?

JonasDroid said:
he could still use the WM? It's just like a program no? So by just removing the folder it would be back to normal?
Click to expand...
Click to collapse
You basically reboot the phone and it goes back to wmo. Its almost like running a live linux cd...

When you run HaRet Android takes over the phone. When you reboot it will come back to WinMo. Then you run HaRet again and you back in Android. And so on. WinMo 'lives' on the phone, Android on sd.

So the kernel they are talking about is a fake kernel? (not flashed to the actual ROM)
So if anything goes wrong at first boot with the android I can just pull out the battery without bricking the phone?

JonasDroid said:
So the kernel they are talking about is a fake kernel? (not flashed to the actual ROM)
So if anything goes wrong at first boot with the android I can just pull out the battery without bricking the phone?
Click to expand...
Click to collapse
Its not a fake kernel...it is real but it resides on the sd card so your original wmo stuff will still be there in case you ever need to use wmo again.

new to xda and looking for the build for my hd2
Hello I am new to xda and i have a hd2 it is new and have had it about 5 wks am looking for a way to unlock it and also to put the android os on it. I had a friend of mine try this past wknd to do it and it kept flashing a error code and wouldn't allow us to proceed. Can someone please help direct me in the right direction much appreciated.

pierreg34 said:
Hello I am new to xda and i have a hd2 it is new and have had it about 5 wks am looking for a way to unlock it and also to put the android os on it. I had a friend of mine try this past wknd to do it and it kept flashing a error code and wouldn't allow us to proceed. Can someone please help direct me in the right direction much appreciated.
Click to expand...
Click to collapse
You s should start your own thread. There are many different unlock so specify which one you're after, sim unlock? This section is only for android so if you need help on something else, post it in the hd2 general section, not here. Unless it is android related, you won't find help here.

Ok so if I install this:
http://forum.xda-developers.com/showthread.php?t=773790
I can just remove the file on the SD when it doesn't work like we want it too and everything will be back to normal right?

You are correct.
If it doesnt work for you just erase the android folder. I would recommend flashing hard spl, and changing your radio to 2.12.50.02_2. Then load the hyperdroid 1.6 rom. You will have the best luck with that probably without having to change anything in winmo.

JonasDroid said:
Ok so if I install this:
http://forum.xda-developers.com/showthread.php?t=773790
I can just remove the file on the SD when it doesn't work like we want it too and everything will be back to normal right?
Click to expand...
Click to collapse
I'd recommend using a spare SD card. When you run Android it creates a ton of folders on it, so it's easier to have a dedicated one than to try and delete everything later (if he decides not to stick with Android).
Also, I read through the thread and couldn't see anywhere... did you tell us what radio is on the HD2? It needs to be (I believe) 2.08 or higher, and it's VERY recommended to have a 2.x.50 and not a 2.x.51 radio.

If you flash a 2.x.51 radio on a t-mobile US HD2 you will brick it. Try flashing radio 2.12.50.02_2

johncmolyneux said:
I'd recommend using a spare SD card. When you run Android it creates a ton of folders on it, so it's easier to have a dedicated one than to try and delete everything later (if he decides not to stick with Android).
Also, I read through the thread and couldn't see anywhere... did you tell us what radio is on the HD2? It needs to be (I believe) 2.08 or higher, and it's VERY recommended to have a 2.x.50 and not a 2.x.51 radio.
Click to expand...
Click to collapse
Yeah dno the radio version or the bootloader version.
Do i need root to see that?? Is it just booting while pressing volume down to get the bootloader and the info I need?
Also I read that the HyperDroidV1.6 is overclocked and undervolted and I drather not do that. Just want it as stable as can be. (I know my overclocked legend is stable but if he has a really crappy processor,..)
BTW: I know what overclocking does but what's good about undervolting?? better batterylife?
I think I'll just give this a try this weekend (when my dad (and his phone xD)are home)

JonasDroid said:
Yeah dno the radio version or the bootloader version.
Do i need root to see that?? Is it just booting while pressing volume down to get the bootloader and the info I need?
Click to expand...
Click to collapse
Just reboot the phone. The radio version is shown at the bottom left of the first white HTC screen (R,G,D - R is the radio version).
JonasDroid said:
Also I read that the HyperDroidV1.6 is overclocked and undervolted and I drather not do that. Just want it as stable as can be. (I know my overclocked legend is stable but if he has a really crappy processor,..)
BTW: I know what overclocking does but what's good about undervolting?? better batterylife?
Click to expand...
Click to collapse
I'm assuming undervolting is for better battery life, but have never bothered with it myself. Just have a read of the most popular Android builds to see which you think will work for you. I can recommend FroyoStone Sense v3.1, but I would because that's what I use!
It's so easy to try the different builds that it's no big deal if you play with one and don't like it, so don't be shy - give em all a go if that's what it takes!
Edit: Just noticed your edit from when I was posting. lol

froyo x red not working

downloaded this android http://www.multiupload.com/KOY1IS2G8L
when i run haret i get these error messages
line 8: Expected <varname>
unknown keyword: 'INITRD_OFFSET'
unknown keyword: 'rel_path'
unknown keyword: 'INITRD_OFFSET'
but then android starts up normally?!
i get the sprint and 4g animations
then its asks me to launch using either launcher which or zeam, i used both and they both are different in layout, i normally use launcher,
and my WIFI DOESNT WORK, i go to settings turn wifi on but it just says ERROR.
My MAIN PROBLEM IS WIFI SOlVED
Main problem now is that android keeps freeezing, carry on reading this thread

Okay I've edited it, try it now! Should work!

nasko_spasko said:
Try with another haret. Post or attach your startup.txt. ops sorry i didn'saw your startup
Click to expand...
Click to collapse
another haret? do u mean different android version, because if so i dont want 2.1 or 2.2 ive tried them and their not great, want to use froyo red

mickeystar said:
another haret? do u mean different android version, because if so i dont want 2.1 or 2.2 ive tried them and their not great, want to use froyo red
Click to expand...
Click to collapse
NONO forget it
just look the post above^^^^^^
I've attached the startup.txt and put the androit files to the root of sd, not to andboot

nasko_spasko said:
NONO forget it
just look the post above^^^^^^
I've attached the startup.txt and put the androit files to the root of sd, not to andboot
Click to expand...
Click to collapse
but my android still works i want wifi to work

Why are you using FROYO X RED 2011.02.06,
there is a newer release: FROYO X RED CAMERA 2011.02.24 FOR BLACKSTONE

mickeystar said:
but my android still works i want wifi to work
Click to expand...
Click to collapse
The startup, you have posted is very complicated and wrong! Try with that I've posted and download the latest kernel and modules from here

nasko_spasko said:
The startup, you have posted is very complicated and wrong! Try with that I've posted and download the latest kernel and modules from here
Click to expand...
Click to collapse
kk, im busy at the moment check this thread in like a few days times
what kernels do i use the link u posted has loads?

mickeystar said:
what kernels do i use?
Click to expand...
Click to collapse
Well, use the latest(first in list) htc-msm-linux. After the download completes, copy and rename zImage**** to zImage(replace the old zImage) the modules don't need rename, just delete the old modules. I've already posted that in the gingerbread thread, you can read it, take a look at the video, you will like it, I like it
more than FROYO X (I'm talking about the Gingerbread)

nasko_spasko said:
Well, use the latest(first in list) htc-msm-linux. After the download completes, copy and rename zImage**** to zImage(replace the old zImage) the modules don't need rename, just delete the old modules. I've already posted that in the gingerbread thread, you can read it, take a look at the video, you will like it, I like it
more than FROYO X (I'm talking about the Gingerbread)
Click to expand...
Click to collapse
are u telling me to use gingerbread instead of froyo x?
also do i launch using zeam or lanucher. ive been using launcher but my android keeps freezing so that nothing works and i have to restart my phone, ive using the latest modules and zimage but my phone still froze. ive not been able to use my android for more than 10 mins without it freezing

mickeystar said:
are u telling me to use gingerbread instead of froyo x?
also do i launch using zeam or lanucher. ive been using launcher but my android keeps freezing so that nothing works and i have to restart my phone, ive using the latest modules and zimage but my phone still froze. ive not been able to use my android for more than 10 mins without it freezing
Click to expand...
Click to collapse
There is something you mess up! Mine runs with Launcher Pro
Gingerbread is much better than froyo in general, but as I say there is a lot of work to do (the developers)!

i installed froyo red x camera but i don have txt input, i keep getting acore has stopped unexpectedly.....cant therefore sync contacts, sms or make calls as error keeps poppin up

nasko_spasko said:
There is something you mess up! Mine runs with Launcher Pro
Gingerbread is much better than froyo in general, but as I say there is a lot of work to do (the developers)!
Click to expand...
Click to collapse
So how do I stop android from freezing?

mickeystar said:
So how do I stop android from freezing?
Click to expand...
Click to collapse
I'll tell you how I'm doing it. I've just downloaded the gingerbread image, I used to boot it
with the pack(haret+startup) of froyo x, and I've updated the kernel, and modules ofcourse, and rootfs optionally! And it works for me.
BTW, try to put the device into 'Airplane Mode' and tell us if it freezes.
I'm really tired now, I'm coming back from work, so bye!

This should be kept inside the Froyo X Red Camera test thread
This should be kept inside the Froyo X Red Camera test thread
Read that thread and follow the instructions there.
If you cant solve it with those instructions your are much more likely to get an answer from someone with experience with the build or even the creator of the build. Any complaint of a crash or nonstart should come hand in hand with a log.
Search.
Read.
Write.(If this related to an existing thread then ask there)

magfal said:
This should be kept inside the Froyo X Red Camera test thread
Read that thread and follow the instructions there.
If you cant solve it with those instructions your are much more likely to get an answer from someone with experience with the build or even the creator of the build. Any complaint of a crash or nonstart should come hand in hand with a log.
Search.
Read.
Write.(If this related to an existing thread then ask there)
Click to expand...
Click to collapse
u have 9 posts dont tell me what to do. lol
well seriously thanks for the advice

Follow this guide to the letter
http://forum.xda-developers.com/showthread.php?t=959831
I have run x red setup exactly as this thread said and have had no problems whatsoever for the last few days.
I would also suggest flashing one of the newer roms like this one.
http://forum.xda-developers.com/showthread.php?t=616294
Try running this combo for at least an hour before trying to add new apps so we can exclude as many possible sources of failiure

hey there
followed the instructions... managed to run haret on my blackstone however it just can reboot to the froyo... changed the startup.tx file but to no avail.. any help?

Wait a bit will upload the files i am using
Did you unpack all the files at the root of your memorycard (not in a folder)?
If so i will upload an allready set up dump of my system that you can try.

magfal said:
Did you unpack all the files at the root of your memorycard (not in a folder)?
If so i will upload an allready set up dump of my system that you can try.
Click to expand...
Click to collapse
problem solved i replaced my froyo user config with the gingerbread.userconfig
also in airplane mode

[Q]Noob needs help choosing

Hi guys,
I know I'm being lazy and people like me are annoying
I saw the development section and its crazy :O
Anyways I'm active on the galaxy S forums and know my way around flashing that phone but now my friend want me to put Android on his HD2.
Its still on Windows mobile, nothing modified. European/Dutch version.
So many roms here, maybe someone can give a tip.
-Easy to flash from windows mobile (im a galaxy s flasher)
-Most stable Gingerbread build, doesnt have to be the latest version
-Everything working, fast and no bugs. (dont want him to come back complaining)
-No cyanogenmod
-No preinstalled apps etc. Basic apps are fine but not stuff like Titaniumbackup etc
No need for extra stuff like huge amount of customization stuff or oc etc, its not my own phone and the guy just wants to use it for apps an normal browsing
Basically a clean stock install, maybe a little skin or launcher. Touchwiz launcher is great maybe something like that or maybe Sense, but most important its clean and simple.
Which rom is recommended?

Valinorian said:
Hi guys,
I know I'm being lazy and people like me are annoying
I saw the development section and its crazy :O
Anyways I'm active on the galaxy S forums and know my way around flashing that phone but now my friend want me to put Android on his HD2.
Its still on Windows mobile, nothing modified. European/Dutch version.
So many roms here, maybe someone can give a tip.
-Easy to flash from windows mobile (im a galaxy s flasher)
-Most stable Gingerbread build, doesnt have to be the latest version
-Everything working, fast and no bugs. (dont want him to come back complaining)
-No cyanogenmod
-No preinstalled apps etc. Basic apps are fine but not stuff like Titaniumbackup etc
No need for extra stuff like huge amount of customization stuff or oc etc, its not my own phone and the guy just wants to use it for apps an normal browsing
Basically a clean stock install, maybe a little skin or launcher. Touchwiz launcher is great maybe something like that or maybe Sense, but most important its clean and simple.
Which rom is recommended?
Click to expand...
Click to collapse
this rom is easy simple fast and visually stunning, newest android
http://forum.xda-developers.com/showthread.php?t=1247295
very easy to flash just do a search on youtube : Flashing nand android on hd2 you'll find plenty of tutorials there
make sure you do task 29 and newest radio 2.15 *just add 1 w) ww.4shared.com/file/rVNaZcTK/Task_29_with_Radio_2155014.html
flash magldr 1.13 and use the flasher option in magldr
Flash 150MB Clockwork partition
from there install the rom from the sd card thru clockwork
shouldnt take more than 20 mins

mr.maxout said:
this rom is easy simple fast and visually stunning, newest android
http://forum.xda-developers.com/showthread.php?t=1247295
very easy to flash just do a search on youtube : Flashing nand android on hd2 you'll find plenty of tutorials there
make sure you do task 29 and newest radio 2.15 *just add 1 w) ww.4shared.com/file/rVNaZcTK/Task_29_with_Radio_2155014.html
flash magldr 1.13 and use the flasher option in magldr
Flash 150MB Clockwork partition
from there install the rom from the sd card thru clockwork
shouldnt take more than 20 mins
Click to expand...
Click to collapse
Thanks Gonna try this then. Seeing as 2.0 version is around the corner and maybe it will bring clk so I'll wait for that

I flashed my HD2's with MIUI ROMs, one with iOS second with Honey......
Love both of them, everything works. And funny thing, iOS looks just like Iphone!!!
Kudos to the dev!!
Really easy to flash, I used Magldr and just followed instruction of the OP.
Do not forget to D/L HD2 toolkit, run Task29, install Magldr. Then you can go 2 ways. Either CWM.... that worked for me loading iOS or Magldr.
Here is the link: http://forum.xda-developers.com/showthread.php?t=1010498
Sorry... for some reason cannot find the link to HD2 Toolkit. Maybe someone can post the link for you????
Good luck.
Tester.

Tester30 said:
I flashed my HD2's with MIUI ROMs, one with iOS second with Honey......
Love both of them, everything works. And funny thing, iOS looks just like Iphone!!!
Kudos to the dev!!
Really easy to flash, I used Magldr and just followed instruction of the OP.
Do not forget to D/L HD2 toolkit, run Task29, install Magldr. Then you can go 2 ways. Either CWM.... that worked for me loading iOS or Magldr.
Here is the link: http://forum.xda-developers.com/showthread.php?t=1010498
Sorry... for some reason cannot find the link to HD2 Toolkit. Maybe someone can post the link for you????
Good luck.
Tester.
Click to expand...
Click to collapse
here it is :
http://forum.xda-developers.com/showthread.php?t=1090783

Just found it!!! Thanks anyway!!
http://forum.xda-developers.com/showthread.php?t=1090783&highlight=hd2+toolkit

Thanks But I'm not really a fan of the whole Miui theme Dont like the settings menu etc.
And thanks for the HD2 toolkit Hadnt found that, seems really handy Thanks

Man......
Browse any post with the pix attached. Find what yer looking for....Read small print Known as bugs.... Chose what suits your needs and install it!!! That's easy!!! Anyhow... If it doesn't work for you, change IT!!!
That's gonna be more practice for you!! LOL
Have a good testing!!!
Tester

Tester30 said:
Man......
Browse any post with the pix attached. Find what yer looking for....Read small print Known as bugs.... Chose what suits your needs and install it!!! That's easy!!! Anyhow... If it doesn't work for you, change IT!!!
That's gonna be more practice for you!! LOL
Have a good testing!!!
Tester
Click to expand...
Click to collapse
Its not my own phone...... wanna do it right in 1 shot. And have you seen the development section? Too many.
Anyways I found what i was looking for.