Replacement Friendstream from Froyo - Desire Themes and Apps

Im running Modaco 3.1 and im very happy with it. i do however have one small issue
Im running danish version and i cannot for the life of me get the line that says when it's last updated to show 24h format
I have tested Jons Foryo 2.2 rom and the friendstream widget in that is so much better, but how do i remove the old one from modaco rom and install the new one ?
Preferably without having to recook the entire rom
an adb shell and use the command rm *FriendStream* gives the error 'Directory not empty' and then fails the removal
Any bright ideas ?
/Smirge
p.s. i do not know how to cook and resign a rom - yet, but i suppose it can be learned if i have to.

Well - past hour or 2 i have learned how to sign the zip file - easy piece of cake
But if i take the friendstram widgets from the froyo rom i had and replace those in the 2.1 Modaco rom, i don't get a widget, and if i run the FriendStream app i get a force close....so i guess it's not compatible
dang - really had hopes for this....
But on the positive side - i learned stuff from this
/Smirge

Related

Most suitable ROM for Magic

So I've caved in to temptation and rooted my Magic. Now I'm looking for a suitable ROM - I've been into the Sapphire wiki and looked at the ones listed in there but they don't really explain what is on the ROMs.
What I am looking for is a ROM that contains Exchange sync, multitouch and browser with Flash, and most importantly - stability!
Also a few more questions - can I use the Android market if I have a custom ROM? I ask because in the ROM discussions I've noticed a lot talking about adding and removing software using the adb tool. Are there any other pitfalls I should be aware of, seeing as this my first time applying a new ROM.
TIA
Firstly what version of the magic do you have, 32A or 32B.
It's best to check out the rom development section and read what each rom is about there.
And yes you can still use the android market, the icon is still in all the custom roms.
Mine is the 32B - UK Vodefone.
The problem is the threads for those ROMs are sometimes more than 100 pages long with little or no descriptions about what is contained on them ... unless I am missing something
Well the ROMs will always be updated on the very first page, there's usually some kind of description as well of what is and whats not included.
As with all these things it's best to try each one out for yourself and see what you do and don't like.
As long as you use nandroid to backup your phone then you can always go back to the rom you were using before you falashed a new one.
I've tried installing Fatal1ty's 32B ROM from this thread:
http://forum.xda-developers.com/showthread.php?t=531617
(Fatal1ty-Hero-Full-v1-4-zip)
Rename it in update.zip
copy to sd
reboot (pressing home+power)
wipe
apply update
Click to expand...
Click to collapse
It said the update.zip was bad ...? Thank god for the nandroid backup (cheers for the advice on that one), I was restored and working again straight away on my old config ... but what went wrong? From doing a bit more reading, is it because the ROM isn't signed? Or should I just download the file again and try again - perhaps it corrupted somewhere along the way?
Can you provide the exact error you got?
st0kes said:
I've tried installing Fatal1ty's 32B ROM from this thread:
http://forum.xda-developers.com/showthread.php?t=531617
(Fatal1ty-Hero-Full-v1-4-zip)
It said the update.zip was bad ...? Thank god for the nandroid backup (cheers for the advice on that one), I was restored and working again straight away on my old config ... but what went wrong? From doing a bit more reading, is it because the ROM isn't signed? Or should I just download the file again and try again - perhaps it corrupted somewhere along the way?
Click to expand...
Click to collapse
I've been caught out with something like this before - make sure the zip you are downloading is the actuall update zip! Open it and check it only has the 3 folders and boot.img in it.
The update.zip maybe in the zip you have downloaded
But on a side note - the Hero Roms aren't suitable (yet) for the 32B's as the RAM is too small - wait until they cut it down a bit.
I would recommened either Nk2 or CyanogenMod [v3.6.8] && Palm Pre theme [1.5] ported
The second being the fastest i've used (rapid infact)
Cheers - I tried downloading the rom again and this time used adb push to copy and rename it to the sd card, tried again and it worked.
I agree with what you're saying about the hero rom needing some work though. I can't use touchflo or the weather app as they are too slow. Browser is also quite a lot slower than on the stock Voda UK firmware.
I really like HTC Peep and the facebook integration into my contacts, and the HTC keyboard is a lot better.
On your advice I'll give the CyanogenMod rom a try. I would like to find one good one and stick to it rather than become addicted to flashing the latest roms every week!

Is it possible to run Cyanogen 4.2.6 on the SDK Emulator?

Is there a good way to get the current version of Cyanogen up and running on the SDK emulator? I have several people that complain about my application widget closing when they open or close the keyboard. The logs show nothing pertaining to my application and the only thing they all have in common is a stock G1 with Cyanogen 4.2.6 and no home screen manager. Many others with non-modded G1's do not have this problem.
I'd like to test it out in the emulator since I now only have a Droid
I found some instructions with an image file to use for this, but it was for a very old version of Cyanogen.
do a nandroid backup and then copy the files from it in to the directory of a virtual device you have already created
then all shall be good
Is there a good source to snag a existing nandroid backup of 4.2.6? I don't have a G1 or any other device to run a nandroid backup on. Too bad too cause I just shipped out my old HTC Magic a few days ago. Now all I have is my Droid.
I'll search around for one and report back if I locate one.
just did a dump for you
http://code.google.com/p/cyanogen-updater/downloads/list
itl be up in a few minutes
You just need to make a yaffs2 image of the /system folder from cyan's update.zip. The boot.img is already in the zip.
Search for mkfs.yaffs2.
That nandroid backup works perfectly in my AVD 1.6 emulator. Thanks so much for building that for me. I can test all my apps against Cyan now
Thanks goldenarmz too, I'll save this away for future versions. Does this work with Hero roms as well?
pcm2a said:
Thanks goldenarmz too, I'll save this away for future versions. Does this work with Hero roms as well?
Click to expand...
Click to collapse
Yes, you can run anything on the emulator like that
I also found out that trick a few days ago. The only problem I have is that I do not get an Internet connection.
Does the SDK simulate wifi, 3G or is there just another fictive network device? I've got DroidWall and Y5 installed. Furthermore I've got sometimes problems to start my wifi after rebooting (problem by manual copied wpa_...cfg, I guess).
I am not really sure where to search. I will investigate the stuff in the paragraph above but perhaps you've got another few hints for me?
btw: I've got 4.2.13, but that shouldnt make a big difference, should it?
Anybody has found a fix for internet Issue for Cyanogen system.img file and Android SDK emulator?
Regards,
Oscar.

how do I push the car dock from one ROM to another?

I want to take the cardock.apk from one ROM and use it on another. Both are 2.1 flavors, so I thought it would be as easy as taking the apk from one and pushing it to another. It worked for a little while but then it stopped working. I got an error about permissions. When I ran fix_permissions, it disapeared.
lil help?
rudeguy said:
I want to take the cardock.apk from one ROM and use it on another. Both are 2.1 flavors, so I thought it would be as easy as taking the apk from one and pushing it to another. It worked for a little while but then it stopped working. I got an error about permissions. When I ran fix_permissions, it disapeared.
lil help?
Click to expand...
Click to collapse
I would suggest taking the rom with the cardock.apk and running it in android rom kitchen . You can find a video at TheUnlockr showing you how to set it up and create your own rom. What you'll want to do in essence is un-compiled that rom and remove the apk and drop it into the rom you want (which will also be un-compiled ) once thats done just recompile the new rom with your apk in it and sign it, and flash it too your phone. Of course make sure you Nand backup first just incase something doesnt go right.

[Q] Help!!!!!

Okay I have a really dumb question probably but I have a completely "stock" HTC Tilt 2 for AT&T. I have only downloaded the .NET 3.5, SciLor's GrooveMobile, and nothing else but a couple of themes from this website. I have heard about ROM flashing. I am a 16 year old kid who needed a new phone and wanted to be different from everyone and got the Tilt 2. I hate the freezing of my phone after Opera Internet usage. I hate the stupid touchflo 3D. Great idea and all but just annoying. I want a new layout overall though. I looked at the Leo ROM and I like that one. I just need an experts advice. I want to do this and be able to download most of the apps from my phone. I have internet access but it is limited due to the family. I like the Standard Reference Leo ROM interface. I want to know if I should do it......I mean will it screw me over huge or will it be a huge advantage? If someone could answer this cry for help ASAP it would be awesome!
thanks
Ok overall I just want to know if flashing the ROM of my Tilt 2 to a Leo ROM, is a good idea. Just that nothing else unless you can give me some instruction. That would be awesome but just a reply to the main question would be fine. Thank you.
Link the ROM you are talking about.
The stock Tilt2 ROM sucks big time. Almost any ROM on here will be faster, more stable, and more functional. If you don't like TouchFlo3D, just turn it off.
forum.xda-developers.com/showthread.php?t=591784
You have to add the http. Thats the link. You might have to copy and paste because I cannot due to the restriction by the site. I guess I have not been verified?
That ROM is for a different phone, the HTC HD2. You need to flash a ROM for the Rhodium/Touch Pro 2/Tilt2, or it won't work right (or might even brick your phone).
The ROMs you want are here:
http://forum.xda-developers.com/forumdisplay.php?f=490
And the Energy ROM (similar to the one you linked, but for the right phone) is here:
http://forum.xda-developers.com/showthread.php?t=562773
Okay thanks. Yeah I was on my phone and was reading this guideline that instructed how to flash the tilt 2 into the "cadillac of tilts" I dont know if this guy is legit... But if its not a big deal, what do you think I should do? And can I still change the themes or wallpapers or will I have to reflash again? Also do you know how long it takes to flash a phone?
tscyadi4 said:
Okay thanks. Yeah I was on my phone and was reading this guideline that instructed how to flash the tilt 2 into the "cadillac of tilts" I dont know if this guy is legit... But if its not a big deal, what do you think I should do? And can I still change the themes or wallpapers or will I have to reflash again? Also do you know how long it takes to flash a phone?
Click to expand...
Click to collapse
Not sure what a "cadilac of tilts" is tbh but follow this guide and you will be fine.
HOW TO FLASH A GSM ROM
Im not sure either his link is
tilt2.blownfuze.org
Energy ROM is what I use. Its faster, smoother, more stable than the (terrible) stock ATT ROM. Its not as lightweight (heavier on program memory usage) than some others. But I personally like the aesthetics and functionality.
I'm not sure if the reference version is right for you, if you don't like TouchFLO3D. The Energy reference version includes Sense 2.5, which is the updated version fo the TF3D interface. Although, everything runs faster and smoother on the Energy ROM versus stock, so you might find Sense more enjoyable without all the lag of the ATT ROM.
You might check out the Titanium version if you don't want TF3D/Sense.
Flashing a custom ROM is relatively easy. But be sure to read as much as you can before you start. These are a must read:
http://forum.xda-developers.com/showthread.php?t=550131
http://forum.xda-developers.com/showthread.php?t=550540
And Task29 is optional, but highly recommended:
http://forum.xda-developers.com/showthread.php?t=649191
If you do the reading, and follow the instructions carefully, you will be fine. HardSPL only takes a couple minutes, and flashing the ROM itself takes a few minutes. It takes some time (few minutes) for your phone to reboot after you flash. Add in time to get the phone configured the way you like, reload the apps, etc., then the entire process may take you an hour or so. Maybe a bit more the first time, since you want to make sure you're doing it all correctly.
But trust me, its worth the time and effort.
tscyadi4 said:
And can I still change the themes or wallpapers or will I have to reflash again?
Click to expand...
Click to collapse
You can change the wallpaper all you want. In fact its easier on the Energy ROM than stock (and more options). The ROM also comes with a variety of themes to choose from. Or you can change the theme with some of the cabs available on this website.
Keep in mind that flashing a custom ROM will delete all your data. So you will need to synch, backup your contacts, etc. (several different options for this). You are basically starting from scratch, except better.
One thing I have notice, the latest version of the Energy ROM (Sept. 29) seems to have more bugs than usual, due to his updating Cookies Home Tab from 1.5 to the 2.0 beta. Nothing that seems like a real dealbreaker, but some annoying things (like the album art on the music player showing the previous - not currrent - song played).
You may/may not want to hold off a bit to see if these kinks get worked out. NRG updates often (usually every 5-7 days). So some of these things might be fixed soon. In fact, it looks like new ROMs will be uploaded soon, maybe today. Read the last few pages of the Energy ROM thread for more details.
That said, even with a few bugs, the Energy ROM would still be a big improvement over the stock ROM. It fixes so many things, so much faster, and more functinal, that its still a net improvement by a long shot.
Yeah well thats alot of the information I was looking for so thank you! My next question is do I need to remove the memory card and sim card when I do this? also is this safe for my computer?
As you'll see in the n00b instructions, its advised to remove both the SIM and the SD card to avoid them from becoming formatted or otherwise damaged during the process.
And yes, its completely safe for your desktop computer.
ok so i did the hard spl and it worked i think it was just like a hard reset without deleting apps and messages but when i went to download the new rom to my computer hotfile was annoying and it came up as an unknown file type and i couldnt find it after i downloaded it could someone walk me through or help me! plllllleeeeeeeeeeeez
No, HardSPL is nothing like a hard reset. SPL only allows "official" ROMs released by your cell carrier to be flashed. HardSPL unlocks the SPL so you can flash any ROM.
What browser are you using to download the files? Depending on your browser, and how its defaulted, the files should be at My Documents\Downloads, or can be somewhere else altogether.
The files are zipped using a compression called 7zip, so you need to unpack them using the 7zip program. For some reason, the latest Energy files seem to only be unpackable with the latest 7zip version (I think the 9.17 beta, see link below), which has not been the case in the past. I've been able to unpack lots of previous builds using more common unzip programs like Winzip or WinRAR (which may or may not already be on your computer). I haven't personally downloaded or flashed the latest Energy ROM, but if you search the Energy ROM, there is a good amount of discussion on this issue.
http://www.7-zip.org/
ok so what your saying is i judt have to download the 7 zipbfolder and then it will work?
Yes, download the 7zip application (get the 9.17 beta .exe) and install it. Then it should unpack the archive automatically when you click on the .7z file.
Ok I downloaded the 7zip and tried to download the standard reference rom and it still said it was unknown. I installed 7zip. Do I need to save the rom to a certain folder or what?
Were you sure to get the latest 7zip version, the 9.17 beta?
Is the 7zip program giving you the error message, or Windows? If its just Windows telling you the file type is unknown, then right mouse click on the ROM file, and select "Open With", scroll down to "Choose Program" (if 7zip is not already given as an option) and choose 7zip.
You can also right click on the file, choose "Properties", under where it says "Opens with", click the "Change" button, and choose 7zip from there.

HTC Hero GSM - Cyanogen 7.2

Cyanogen has released the 7.2 version OS for HTC Hero GSM. I've seen a lot of people talk over the CDMA version, but none on the GSM one. Has anyone tried it out? I wanna hear the bad and good remarks that you have to say about it , by "you" I mean those who have tried it.
To be sure, this is the tipe of HTC Hero I'm referring to: spinei.hotnews.ro/wp-uploads/2009/10/htc_hero.jpg
I runned it for a week or two. As for stability it's the same as CM7, CM7.2 just has some ICS backports, nothing bad
What do you mean by ruining it?
People who own the CDMA version claim that on their phone it's a performance improvement from 7.0 to 7.2.
I have 2.1 official version on it. It's stable and somewhat ok in terms of flow in the menus. Will 7.2 be an improvement over the the official 2.1 version on my phone?
P.S. I didn't test any other version of Android, it never used anything except the stock version.
cata3092 said:
What do you mean by ruining it?
People who own the CDMA version claim that on their phone it's a performance improvement from 7.0 to 7.2.
I have 2.1 official version on it. It's stable and somewhat ok in terms of flow in the menus. Will 7.2 be an improvement over the the official 2.1 version on my phone?
P.S. I didn't test any other version of Android, it never used anything except the stock version.
Click to expand...
Click to collapse
It;'s not ruined, I had it on my device for a week or two. I thing it will beat your 2.1 official. It will not have HTC Sense. You get 2.3 version of android some ICS goodies. I didnt run official 2.1 on hero so i dont know how it is
What does HTC Sense has and cyanogen 7.2 doesn't have as equivallent?
From what I saw in youtube videos, cyanogen pretty much has something almost equal to HTC Sense as GUI. Are you referring to the HTC specific apps and widgets?
P.S. I misread "runned" for "ruined" )
Yup that fancy weather widget and all that stuff, but you wont miss it trust me, that raw android look is way better
One more question.
How functional are these:
- WIFI
- Bluetooth
- Camera
- basic phone functions(calling, messages)
- sound
? Did you have any problems with these in terms of errors or functionality(loss or low of signal, automuted, etc.)? And did you had any random restarts issues?
Nope they all work awsome, it's a stable release, those releases dont have problems with that. And you shouldnt be too scared to flash your device. So far I had 4-5 android devices that are rooted and flashed a million times without any losses, you may encounter a soft brick sometimes but you can fix that easily. You cant know how good is a ROM until you test it. So stop being a girl and flash it . No offence If you dont like it, there is a lot more ROM's on this forum, you dont have to choose CM7.2....
First time to install Cyanogenmod was not entirely easy
Hey all,
I just created an account to be able to post my experience with CGM 7.2 on the HTC Hero GSM. Everything I checked so far works fine, however there's a slight jaggedness in scrolling.
For me as a complete newbie it took about 6 hours to get it to run, mainly because I had to get straight what I actually have to do. There is no paucity of TO-DOs, just no individual one worked for me - I got it sorted out only by combining all kinds of posts from everywhere. That's why I want to share my viewpoint on this - without all kinds of different people airing their piece of the puzzle I would surely have given up!
The specs were as follows; starting with the "fastboot-info":
HERO CVT SHIP S-ON
HBOOT-1.76.0007 (HERO10000)
MICROP-010f
TOUCH PANEL-SYN0104
RADIO-6.35.15.11
Aug 4 2009,19:43:30
And software-information:
Firmware-Version 2.1-update1
Baseband-Version 63.18.55.06PU_6.35.15.11
Kernel-Version 2.6.29-7527f009 [email protected] #1
Build-Nummer 3.36.405.1 CL199109 release-keys
Software-Nummer 3.36.405.1
Browser-Version WebKit 3.1
So here's what I did:
0) I wrongly assumed that I need to unlock my bootloader directly, i.e. using the software from HTCDev. As I am using Ubuntu Linux, this meant quite a hassle in itself, and I did not manage it after all. The reason was due to an error when trying to get the Identifier Token needed by HTC to send you some clearance-file to unlock the bootloader:
Code:
fastboot oem get_identifier_token
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.007s]
finished. total time: 0.007s
I found no solution to this problem, but tried to up- or downgrade my HBOOT-version. Luckily that wasn't necessary after all. A side-effect of it was that I installed adb and fastboot, which I happened to use later on (but are not necessary either).
Let me assure you: Unlocking the bootloader directly (in the HTC-way) is NOT necessary!
1) Getting root access:
I used UniversalAndroot-1.6.2-beta5.apk to do that, and conveniently installed it using
Code:
adb push, adb install
though if you don't want to install this nice utility, you can just install a File Browser and then install the package.
Now here's a quirk that cost me about an hour: Using the default settings, UniversalAndroot only claimed to successfully get root-access, but left everything unchanged! Only after finding a comment on some website did I try to check both check-boxes (log and temporary install) - this time it worked (it installs yet another app called SuperUser)! (I then ran it again without the temporary setting enabled, which at least did not revoke the SuperUser-Account). Anyways, adb is handy in this case again because you can just log in with
Code:
adb shell
and check if
Code:
su
gives you root access or says "Permission denied".
2) Deleting /system/etc/install-recovery.sh I got that idea from androidforums.com, and will probably never know whether it was really necessary. That just shows how desperate I became after 3 hours of poking around in the dark.
3) Installing ROM Manager from Google Market There's probably a quicker way to install recovery images, which does not involve a damn Google account! Or maybe it is not even neccesary.
4) Downloading and installing ClockWorkMod Recovery I did this using the ROM Manager. Again, there might be a more direct way. In any case, I was paranoid enough to install it twice, as it was recommended that way somewhere.
5) Downloading cm-7.2.0-hero.zip and putting it on /sdcard/ Again, I just used
Code:
adb push cm-7.2.0-hero.zip /sdcard/
to accomplish this, but my guess is you can just as well do it via USB.
6) Format cache, /data/factory, /boot and /system By that, I mean do this in ClockWorkMod (you get there by booting up with HOME+POWER). The last two locations to reformat are "hidden" in the menu partitions. This step is very important because without it, Cyanogenmod did only loop infinitely (for more than 10min) in its loading screen! I got this idea from the more detailed description at droidforums.
7) Install Cyanogenmod using ClockWorkMod That's straight forward; just select the image from sdcard and you're done!
Hope I didn't forget a vital step, and maybe it is helpful to somebody; at the very least my future ME will maybe find it useful again .

Categories

Resources