hi,
i gained root acces to my vodafone magic 32b a few days ago using the goldcard method but have not been able to successfully install any custom roms. i have folowed many how to's off the unlockr and this forum the cyanogen wiki all of it and still have been unable to install a rom. every time i try to install a rom my phone is stuck at the vodafone boot screen and does not come out of it. i installed rom manager in the hopes that will fix my problem but it did not flash the clockwork recovery option sayong it does not have permission....i decided to change from ra recovery top the clockwork recovery manually and bypassing the rom manager requirement to flash it, when i try to install the rom through rom manager it says click okay to reboot into recover mode i click okay and my phone does nothing.... please help for some reason im stuck on android 1.5!!
solved problem
Related
Hi guys, I just got a mytouch 3g for tmobile, its the orginal one and i run a 1.6 OS. Ive been trying to root it using the guide by candymanmike on this forum, when i try to load a ROM it get stuck on a page with an exclamation mark and if i press home and end i get a list, i try to apply sd:update.zip but it gives me the error that theres no such file or directory, so i decided to wipe data/factory reset, what have i done wrong and what should i do from here, or should i restart the process
which recovery did you flash clockwork or amon ra?
i run clockwork, now when i install the rom cyanogen 6.0 (ive also tried 5.0.7 incase 6.0 isnt meant for my phone) it resets my phone and puts me in the recovery screen, from there i try to do apply the sd card but it says it cant find.
when i tried to use clockwork i never even made it to the recovery menu so i used rom manager to flash amon ra and didn't have a problem after that but if you got to the recovery menu using clockwork you have a different problem than i thought you did
You need to make sure the rom you're flashing is on the root of the sd card. Not in any folder, just right there on the sd card.
I'm currently running CM6 with ramon recovery on my 32b magic and each time I flash a new nightly it comes pre-installed with Koush's Rom manager.
Would it be a simple case of installing clockwork recovery through the rom manager as it suggests or do I need to remove Ramon recovery first?
Has anyone had any success with Clockwork recovery on the 32b magic?
There's no reason it shouldn't work without removing recovery. However I've heard lots of people say clockwork didn't install right so they were left without recovery. Before flashing it, make sure you have a fastboot capable SPL (2010/'09/'05/'04) so you can boot in to the SPL and flash the recovery image from there, should the need arise
It is that simple, and I have had great success with Clockwork Recovery and ROM Manager.
I checked through 100s of post tonight and could not find the answer to this and am in need of some help. I attempted to install a Cyanogen Nightly tonight through Rom Manager with no prior knowlege of the issues with CW 2.5 vs. CW 3.0. Stupid I know.
So natuaraly, when the download finished and Rom Manager tried to install, my MT4G just hung at the white boot screen. Through previous posts, the directions were simple to reflash the previous CW Recovery through Fastboot and reflash the Rom.
Well thats where the problem is.... When I attempt to flash ANY Rom earlier than 3.0.0.5, it will say OKAY in CMD, however the phone will never boot into the Recovery. I even tried fastboot erase recovery then reinstalled and still nothing.
So i decided to go a different root and reinstalled 3.0.0.5 to see if there was any work around through there. After i install 3.0 through Fastboot, I am able to go into Recovery, however when I select ANY option no matter what, the hat and the gear icon stay in the background and nothing happens.
I am very confused and lost and am hoping someone here will have had the same issue and can help me get my phone back in order.
Thanks in advance guys!
highrolla1866 said:
I checked through 100s of post tonight and could not find the answer to this and am in need of some help. I attempted to install a Cyanogen Nightly tonight through Rom Manager with no prior knowlege of the issues with CW 2.5 vs. CW 3.0. Stupid I know.
So natuaraly, when the download finished and Rom Manager tried to install, my MT4G just hung at the white boot screen. Through previous posts, the directions were simple to reflash the previous CW Recovery through Fastboot and reflash the Rom.
Well thats where the problem is.... When I attempt to flash ANY Rom earlier than 3.0.0.5, it will say OKAY in CMD, however the phone will never boot into the Recovery. I even tried fastboot erase recovery then reinstalled and still nothing.
So i decided to go a different root and reinstalled 3.0.0.5 to see if there was any work around through there. After i install 3.0 through Fastboot, I am able to go into Recovery, however when I select ANY option no matter what, the hat and the gear icon stay in the background and nothing happens.
I am very confused and lost and am hoping someone here will have had the same issue and can help me get my phone back in order.
Thanks in advance guys!
Click to expand...
Click to collapse
I havent had that issue exactly, but I might be able to help wlk you through getting this fixed. Ive had problems more than once myself on recovery, and helped a couple others solve other issues on here. If you want, add me on google talk (same username as on xda), and Ill walk you through it. Might have to wait till the morning, though, as Im probably gonna head to bed soon.
Fastboot 2.5 recovery and reflash froyo rom. If you decide to install CM7 again - read,search and make sure that you understand what you're doing. It has been stated at least few dozen times that Rom Manager is useless with gingerbread until Koush updates it.
Same Issue??
I believe my issue sounds similar.
I tried to go from Iced Glacier up to CM7. When I did I attempted to use the Clockwork Recovery 2.5 and of course it didn't work. Then I tried to upgrade it to 3.0.0.5. Now when I try to reboot into Clockwork recovery the phone just stays on the MyTouch 4G splash screen. The only way to get around it is use the Power/Volume down button and click on FASTBOOT and then select REBOOT.
The phone then boots in Iced Glacier. I have redownloaded ROM Manager and attempted to FLASH CLOCKWORKMOD RECOVERY. But it still won't load into recovery.
Essentially I need some step by step help to get back to clockworkmod recovery. I'm not too worried if I need to wipe everything. Just looking for the ability to restore again.
Alternatively I'm interested in upgrading to CM7 but not sure how I could do that without recovery working. I would also ask if you can give step by step instructions it would be much appreciated as I'm still pretty new to this.
Thanks!
I also have the similar problem. I have installed the Clockworkmod 3.0.0.5 and have rooted my phone before i was trying to install the gingerbread version. I made a recovery backup. i tried to restore the phone with that backup image but it still hung up with that "t-mobile mytouch " white splash screen.
What should i do now ? i have no idea how to bring my phone back to life :/
fosunite said:
I also have the similar problem. I have installed the Clockworkmod 3.0.0.5 and have rooted my phone before i was trying to install the gingerbread version. I made a recovery backup. i tried to restore the phone with that backup image but it still hung up with that "t-mobile mytouch " white splash screen.
What should i do now ? i have no idea how to bring my phone back to life :/
Click to expand...
Click to collapse
Jmg90300zx said:
I believe my issue sounds similar.
I tried to go from Iced Glacier up to CM7. When I did I attempted to use the Clockwork Recovery 2.5 and of course it didn't work. Then I tried to upgrade it to 3.0.0.5. Now when I try to reboot into Clockwork recovery the phone just stays on the MyTouch 4G splash screen. The only way to get around it is use the Power/Volume down button and click on FASTBOOT and then select REBOOT.
The phone then boots in Iced Glacier. I have redownloaded ROM Manager and attempted to FLASH CLOCKWORKMOD RECOVERY. But it still won't load into recovery.
Essentially I need some step by step help to get back to clockworkmod recovery. I'm not too worried if I need to wipe everything. Just looking for the ability to restore again.
Alternatively I'm interested in upgrading to CM7 but not sure how I could do that without recovery working. I would also ask if you can give step by step instructions it would be much appreciated as I'm still pretty new to this.
Thanks!
Click to expand...
Click to collapse
Sounds like both of you should of never of done this. This has been discussed a few times, and the end result is always the same.....
Download the correct Recovery image (which can be found in the Development section) and install it to your phone by using the ADB commands, in the fastboot mode. you can find a quick and painless way to set those up in my signature. Once you have installed the recovery image you can boot into hBoot and select recovery. from there you can flash CM7 and the gapps. Once you have done all that download the official clockwork ROM manager from the market and flash his current recovery image.
HTC Magic
SAPPHIRE PVT 32B
HBOOT-1-33.006
CPLD-10
RADIO-2.22.19.261
I have problems getting in to the recovery mode (pwr button + home) it just gives me de red vodafone screen and hangs.
I am trying to install a custom rom.
- rooted the device with universal androot. it says my device is rooted succesfully.
- i also installed rom manager and installed the default clockwork recovery.
But i cant reboot into flash recovery.
I also tried another thread with a custem flash recovery recovery-RA-sapphire-v1.7.0G.img. I followed it's instructions.
the instructions tells me on a terminal session or CMD prompt to install this custom ROM.
adb shell
su
(Now look at your device. If the superuser app is asking for permissions, then just push "allow" and make sure that the "remember" option is checked.)
cd /system/bin
ls
But i get no permission. I cant get root user when i type su.
so I must not have a rooted device or my permissions are incorrect on the sd-card.
Does anyone have an idea what i should do?
Did you reboot your phone after running Universal Androot?
Sent from my LG-P500 using Tapatalk
What happens if you switch off the phone and then press and hold home button while pressing the on/of button to switch on the phone.
If you are root and have installed the recovery properly, it should be shown within a few seconds after showing the red vodafon screen. From there you should be able to flash any custom rom. Meanwhile I flashed many recoveries and roms on both my tattoo and my magic 32b. Never had any problem execept those when forgetting to wipe.
And to be honest, I'm far away from beeing an expert!
I installed rom manager first and then universal androot.
also when i use adb from the android sdk i sometimes get the problem that i have no permission.
Could it be that the phone is'nt correctly rooted?
I tried all kinds of tools either on pc or mac. nithing really works
what would be the best way to root the HTC Magic correctly and what recovery image should i use. Also wich order.
I'm quite the noob when it comes to installing custom roms
Try "SuperOneClickv1.6.3-ShortFuse.zip" (available at xda).
This was very easy to use and worked like a charm.
I used it twice on my magic 32b, no problem!
I tried that also.
the rooting works. I tried an app to check if i have root access and it says I have root acces.
but when I use adb commands and su to root it will say no permission.
i think this is why installing the recovery in clockwork fails.
any suggestions?
I'll repeat myself. Have you rebooted the phone after running the root programs? Either one?
yes. I rebooted after each try but still I can't get into recovery mode. it just hangs.
also when i try to install a recovery image file i still get the no permissions errors.
the only recovery mode install that worked was the recovery from clockwork in ROM manager.
If ADB is working, goto shell (adb shell).
What do you see in prompt,
is it '$' or '#'?
If it's '$' try "su".
What is the output of "id"?
If you're root you should see something like "uid=0(root) gid=0(root)"
I See a $ and my id is shell instead of root.
if I type su it will give me a no permission error.
however I did download a terminal tool for android
from there I can su and it will make me root.
is there anyway i can use the terminal to install a recovery image so that if i boot my phone with home+power I will get into the recovery?
Try something like this:
http://forum.xda-developers.com/showpost.php?p=4056530&postcount=6
Replace the recovery image in the post by for example recovery-RA-sapphire-v1.7.0G.img.
I did it almost the same way.
I was also having a recovery problem (Tmobile) after trying to flash_image RA-1.7.0G into recovery in rooted 2.2.1 OTA (obviously not the way to go). I downloaded the Clockwork Rom Manager from the Market and it was able to flash both Clockwork or Amon RA recovery with no problem and then reboot it into recovery.
sickbox said:
I was also having a recovery problem (Tmobile) after trying to flash_image RA-1.7.0G into recovery in rooted 2.2.1 OTA (obviously not the way to go). I downloaded the Clockwork Rom Manager from the Market and it was able to flash both Clockwork or Amon RA recovery with no problem and then reboot it into recovery.
Click to expand...
Click to collapse
When you reboot and go into recovery, does it load amon_RA or clockworkmod?
I had problems with that from the 2.2.1 OTA.
I was rooted for a long time, and then had to try the t-mo 2.2.1 so I unrooted and ran that for a while after their ota update. It was sluggish and I didn't much like it so I thought I would try using z4root and superoneclick to root it and put setcpu and overclock it a bit to see if it improved. Z4root didn 't work and superoneclick appeared to work. If you went into terminal it would give you # and seem to be rooted. I could install and run set cpu and it would work. However no matter what recovery I tried to install, it would disappear and return to stock recovery upon reboot with the 2.2.1 OTA.
You could get rom manager to load, or seemingly so , clockworkmod recovery. You could also have rom manager load into clockworkmod from within rom manager. Buit as soon as you reboot, it goes back to the default stock recovery.
I eventually gave up with that and decided to reroot old school and rooted it manuallyl. I went back to the sappimg.nbh file, installing the old cyanogen 1.4 recovery, the 1.33.2005 SPL. I then put clockwork mod 2.5.0.7 recovery on and then the t-mo 2.22.23.02. I was running cm6.1 for a while and now Yoshi's ginger rom.
And so, after this wandering tale, lol, I am wondering if you had more success that I did with the 2.2.1 and getting a recovery to load.
cyberstoic said:
When you reboot and go into recovery, does it load amon_RA or clockworkmod?
I had problems with that from the 2.2.1 OTA.
I was rooted for a long time, and then had to try the t-mo 2.2.1 so I unrooted and ran that for a while after their ota update. It was sluggish and I didn't much like it so I thought I would try using z4root and superoneclick to root it and put setcpu and overclock it a bit to see if it improved. Z4root didn 't work and superoneclick appeared to work. If you went into terminal it would give you # and seem to be rooted. I could install and run set cpu and it would work. However no matter what recovery I tried to install, it would disappear and return to stock recovery upon reboot with the 2.2.1 OTA.
You could get rom manager to load, or seemingly so , clockworkmod recovery. You could also have rom manager load into clockworkmod from within rom manager. Buit as soon as you reboot, it goes back to the default stock recovery.
I eventually gave up with that and decided to reroot old school and rooted it manuallyl. I went back to the sappimg.nbh file, installing the old cyanogen 1.4 recovery, the 1.33.2005 SPL. I then put clockwork mod 2.5.0.7 recovery on and then the t-mo 2.22.23.02. I was running cm6.1 for a while and now Yoshi's ginger rom.
And so, after this wandering tale, lol, I am wondering if you had more success that I did with the 2.2.1 and getting a recovery to load.
Click to expand...
Click to collapse
You could have just got booted into recovery once, flashed the engineering SPL only (there's a ZIP you can flash from recovery to do this), which would only change the SPL, from recovery, then erase/reflash the recovery from fastboot, and finally change the SPL back.
DonJuan692006 said:
You could have just got booted into recovery once, flashed the engineering SPL only (there's a ZIP you can flash from recovery to do this), which would only change the SPL, from recovery, then erase/reflash the recovery from fastboot, and finally change the SPL back.
Click to expand...
Click to collapse
Thanks; that is very useful , and I didn't even think of that at the time. I think I was so frustrated that the recovery would not stay I just had a "I will make it work moment" and I knew what I was doing would work.
But thanks, I will definitely remember that if I have to do that again
Just here to help ;D
Sent from my LG-P500 using Tapatalk
Apologies, I am sure this has been asked before but I am in such a pickle as I have read all the threads I can find and that's why I am in this state.
I have root access via ODIN So that's a good start.
Tried to install Pacman no joy, tried then with Goo and their custom roms, no joy, installed CWM no joy so I think all the threads have confused me even more.
I cant see the "install from SD card option" when I boot to recoevery.
I have tried the one click rom update but that fails due to failed to verify whole-file signature
So I currently have a working phone with standard rom and SU and Root access but I cant install any ROMs
I am sure I have missed a stage so I wanted to write a new thread to see if we can go back to basics.
Hope you can help
uktotty said:
Apologies, I am sure this has been asked before but I am in such a pickle as I have read all the threads I can find and that's why I am in this state.
I have root access via ODIN So that's a good start.
Tried to install Pacman no joy, tried then with Goo and their custom roms, no joy, installed CWM no joy so I think all the threads have confused me even more.
I cant see the "install from SD card option" when I boot to recoevery.
I have tried the one click rom update but that fails due to failed to verify whole-file signature
So I currently have a working phone with standard rom and SU and Root access but I cant install any ROMs
I am sure I have missed a stage so I wanted to write a new thread to see if we can go back to basics.
Hope you can help
Click to expand...
Click to collapse
Let's see if i follow you here: You have rooted your device and then installed a custom recovery, or is it that the recovery won't install that's the problem? If you have a custom recovery maybe the fault lies with the recovery ittself?
If that is the problem I had that as well, What i did before flashing a new recovery with ODIN was to unable automatic reboot. Then, when the flash was done I took out the battery and made sure the phone was off. After this I booted into recovery and it worked like a charm... My firts tries with TWRP couldn't flash custom roms though, so I had to flash CWM recovery instead, and that worked as a charm.
Soliquidity said:
Let's see if i follow you here: You have rooted your device and then installed a custom recovery, or is it that the recovery won't install that's the problem? If you have a custom recovery maybe the fault lies with the recovery ittself?
If that is the problem I had that as well, What i did before flashing a new recovery with ODIN was to unable automatic reboot. Then, when the flash was done I took out the battery and made sure the phone was off. After this I booted into recovery and it worked like a charm... My firts tries with TWRP couldn't flash custom roms though, so I had to flash CWM recovery instead, and that worked as a charm.
Click to expand...
Click to collapse
Hiya
Ok so not sure about the Custom recovery bit,
I have now done the PhilzTouch thing and installed that via odin also.
What should II be looking for as far as the custom recovery goes?
Hold on a minute!
Looks like PacMan is now loading up, will update in a bit