Related
Hi,
a few weeks ago I bought the SE Xperia Play and so far I love it. But I know there is more going on in the Android world. So I browsed through the Xperia Play sections and read trough a couple of threads to get answers to most of my questions I had.
But there are still a few remaining, which are:
1) Is there a way to backup the WHOLE phone ? By "whole phone" I mean TA/GDFS areas as well. My current phone is still in it's stock form, here are a few infos:
Modelnumber: R800i
Android version: 2.3.2
Baseband version: ....-1290_14-10
Kernel: 2.6.32.9-perf
Build: 3.0.A.2.181
It's SIM Free with bootloader still in it's locked state. Is there anything special about my phone that devs might want? Just ask and I'll try to provide.
Or is there a reason not to unlock / update / root for me because of low versions that might come in handy in the future for me?
2) Is there a recovery image in development which works on the Xperia Play ? I couldn't find one, but afaik "xRecovery" seems to be the recovery image for Sony Ericsson devices. Or am I mistaken here?
3) By unlocking the bootloader, the Xperia Play loses it's DRM certificates, which makes a couple of apps useless, like Track ID. What other apps won't work anymore after unlocking ? And are there ways to reconstruct / recreate these cerificates and carry them over to custom ROMs which may appear in the future ?
4) MoDaCo released a custom kernel which enables su shell and adb remount. But he managed it w/o unlocked bootloader. How's that possible? Does it only take place in RAM ? Or did he managed to install it in flash ?
5) In a today's thread about the rooted 2.3.3 image I saw that the provided image is an UK image. Is it ok to install such image on a german device ? Or shouldn't I care about the region the FW comes from ? Could I install a US image ? Or are UK images for all european devices?
6) In case I brick my device for some reason while updating it to 2.3.3. Could I recover it by using the UK generic .184 FTF image? Or do I always have to use the latest FW I tried to install on the device?
7) Last but not least. I flashed my buddys HTC Legend with CM7 and I love this ROM. I saw that Blagus is working on a CM7 port for the Xperia Arc. The Arc and the Play seem to be identical HW / SW-wise, does it mean that his port (in case the finishes it) will run on the Play as well (given with a few code changes of course) ?.
Sweet lord, turned out to be more questions then I planned But I guess it's good to have a FAQ kinda place where noobs like me can directly go to and get most important questions answered at once rather then spread all over the place
A big thanks to all in advance and keep up the work here !
Regards,
iCEQB
I am noob just like you and I managed to root my play in like 10 minutes after reading some threads here. Try to find some topics like rooting for beginners and another one which says the options that you have after rooting. I used gingerbreak and managed to get root access in about 5 minutes. As for the bootloader unlock I wouldn't recommend on doing that as there are no custom roms to flash our phones yet and personally I am very hapy with the original rom. The key is to root it with gingerbreak and get rid of all the useless apps that Sony has put in your phone and by doing this you get better battery life, better response and more free space. The apps that I use after rooting are busybox, titanium backup pro(to be able to freeze some apps and not delete them as I didn't know what they were doing) , adfree to get rid of the adds and many others. As for the other questions that you have, a more experienced android user should answer you. I didn't update to 2.3.3 as I will lose the rooting option which is necessary for me right now.
My questions are not about "how to root" as you can clearly see. They are rather about making 100% sure, not losing anything that might be valuable I maybe never get back, which could come in handy, like low system versions, a way to relock the bl with a TA backup, or DRM certificates.
I know how to root my phone and I know about the available options, but as I said, these questions are not about how to pull it of
Thanks anyway,
iCEQB
Sorry for the misunderstanding, I would also like to know these things and thats the reason why I used gingerbreak cause you have the option to unroot and you dont touch anything else. I also agree that we need an all-around FAQ topic which will include your questions.
Also n00b but will try... here goes lol
1. I dont think there is anyway to back up the whole phone. Best you can hope for is backing up settings when rooted. No need to hold off updating. But if you go to 2.3.3 rooting is not possible unless the bootloader is unlocked and you flash the rooted img (problem is if you leave the bootloader locked and update with SEUS it will install 2.3.3 so you will be unable to attain root, for now). No custom roms so i wouldnt unlock just yet (can unlock at anytime just will wipe your phone)
2. dont know
3. dont know (since mine is still locked)
4. dont know lol
5. If your xplay is the r800i. Cannot really see any problems . People who have confirmed the rooted img works are from around the world (uk, Hong Kong, Netherlands)
6. Again people who have used the UK generic .184 FTF image are from around the world. If the device is not sim locked (such as yours i dont think it matters )
7. I think it will, the software is basically the same so as you said a few tweaks and it should work. I think he started on the arc since the fourms are alot more active. Will possibly be unlocking the bootloader myself when some roms appear.
My bad if i interpreted your questions wrong as stated im a newb trying to learn fast lol
p.s you could pm the people who made the ftf files and then make a version of your own? if you want the low system version and as far as ive read its not possible to relock the bl once unlocked, yet? If you deffo know youre going to install custom roms wouldn't it be better to unlock the bootloader sooner rather than later since it wipes the phone?
Thanks for your answers so far !
Your answer for the 5th question bothers me though. What different models are there ? I know of R800i and R800a and I thought the letter behind the number is just some carrier marker or something like that or are there any other differences ?
Are there more modelnumbers existing ?
Thanks,
iCEQB
I hope this helps:
1) Is there a way to backup the WHOLE phone ? By "whole phone" I mean TA/GDFS areas as well. My current phone is still in it's stock form, here are a few infos:
Blagus is working on that, to no avail as of today. Maybe you'll want to contact him as he was looking for people with no SIM-lock, but locked bootloaders.
2) Is there a recovery image in development which works on the Xperia Play ? I couldn't find one, but afaik "xRecovery" seems to be the recovery image for Sony Ericsson devices. Or am I mistaken here?
If you mean Recovery such as CWM, no there's not. I'm not aware of xRecovery...
3) By unlocking the bootloader, the Xperia Play loses it's DRM certificates, which makes a couple of apps useless, like Track ID. What other apps won't work anymore after unlocking ? And are there ways to reconstruct / recreate these cerificates and carry them over to custom ROMs which may appear in the future ?
AFAIK, the other big loss is that you can't update through SEUS and you're forced to use Flashtool.
4) MoDaCo released a custom kernel which enables su shell and adb remount. But he managed it w/o unlocked bootloader. How's that possible? Does it only take place in RAM ? Or did he managed to install it in flash ?
He didn't release a kernel, he released an apk. Plus, the Xperia Play forum in MoDaCo has been empty for a whole week. I guess he's dropped it.
5) In a today's thread about the rooted 2.3.3 image I saw that the provided image is an UK image. Is it ok to install such image on a german device ? Or shouldn't I care about the region the FW comes from ? Could I install a US image ? Or are UK images for all european devices?
I bought my phone from Germany as well, and I've flashed the 2.3.3 updates (both the .FTF and the fastboot .img) without any issues.
6) In case I brick my device for some reason while updating it to 2.3.3. Could I recover it by using the UK generic .184 FTF image? Or do I always have to use the latest FW I tried to install on the device?
I guess you can always revert to the .184 one.
7) Last but not least. I flashed my buddys HTC Legend with CM7 and I love this ROM. I saw that Blagus is working on a CM7 port for the Xperia Arc. The Arc and the Play seem to be identical HW / SW-wise, does it mean that his port (in case the finishes it) will run on the Play as well (given with a few code changes of course) ?.
I guess only Blagus is fit to answer that, but if they're so similar, it should be an easy fit.
Click to expand...
Click to collapse
Thank you very much for your answers !
The loss of using SEUS shouldn't be a problem in any way since FlashTool does the same job, if not better
I'll contact Blagus and see if he needs something from me to get his work done.
Thanks again,
iCEQB
SE_iCEQB said:
Thanks for your answers so far !
Your answer for the 5th question bothers me though. What different models are there ? I know of R800i and R800a and I thought the letter behind the number is just some carrier marker or something like that or are there any other differences ?
Are there more modelnumbers existing ?
Thanks,
iCEQB
Click to expand...
Click to collapse
Models so far?;
r800i (uk, europe, asia?)
r800a (canada, rogers?)
r800at (usa?, at&t?)
r800x (usa? verizon?)
Z1i (china?)
I think other than r800i, others are mostly locked to phone providers? (unless bought sim free in their native country not sure tbh even the r800i is locked to some carriers i think?) I think r800x & maybe r800a are unable to unlock bootladers dues to restrictions from their carriers? Not sure tbh. I think all people in europe got the r800i? Dont know about differences since i got the r800i only
Thank you for answer and the nice list of modelnumbers. Yeah the problem with the few models which bootloaders can't be unlocked seems to be due to their SIM lock (at least it's the only I can find in the bootloader unlock thread ).
Regards,
iCEQB
Fantastic thread! As a new Xperia Play owner coming form a Droid 1, I'm very interested in the mod scene as it pertains to this phone. Great questions, OP!
Great thread lets keep it growing!
Sorry to hijack your thread. N00B here, so apologies in advance. I have read many of the threads on here since getting my xperia play and have joined just to ask a few questions if I may.
I want to root my phone to remove bloatware and more importantly remap the circle button for playing emus.
Q1. How do I know if my phone is bootlocked?
Q2. Is it as easy as run gingerbreak, delete bloatware, install apk, remap button?
Q3. Do i need to be running a certain FW, ie: can only be rooted on old FW.
Just so you can all understand, I know a grand total of sweet F-A about phones and rooting etc. Half of the abbreviations used, I've had to google to find out what they mean lol. As a 33 year old man, I'ts a strange feeling to be in my situation, its like being back at school and sitting my 1st algebra lesson!! Its all Greek and Double Dutch to me!
As in the OP, I also have a sim free phone running;
Model: R800i
Vers. 2.3.2
Base: -1290_14-14
Kernal: 2.6.32.9-perf
Build: 3.0.A.2.184
will this be a problem/is this helpful to a Dev?
Basically Im after a bit of reassurance/guidence as I really dont want to make my phone an expensive paper weight lol.
Thankyou all in advance, and agin sorry to OP for the Hi jack, but was going to post a thread with same name
Oh 1 last thing, if anyone lives in the South London area who knows what they are doing and fancies sorting my phone out for me, gets some drink tokens from me and a big thank you
Martin
Flipfoot said:
Sorry to hijack your thread. N00B here, so apologies in advance. I have read many of the threads on here since getting my xperia play and have joined just to ask a few questions if I may.
I want to root my phone to remove bloatware and more importantly remap the circle button for playing emus.
Q1. How do I know if my phone is bootlocked?
Q2. Is it as easy as run gingerbreak, delete bloatware, install apk, remap button?
Q3. Do i need to be running a certain FW, ie: can only be rooted on old FW.
Just so you can all understand, I know a grand total of sweet F-A about phones and rooting etc. Half of the abbreviations used, I've had to google to find out what they mean lol. As a 33 year old man, I'ts a strange feeling to be in my situation, its like being back at school and sitting my 1st algebra lesson!! Its all Greek and Double Dutch to me!
As in the OP, I also have a sim free phone running;
Model: R800i
Vers. 2.3.2
Base: -1290_14-14
Kernal: 2.6.32.9-perf
Build: 3.0.A.2.184
will this be a problem/is this helpful to a Dev?
Basically Im after a bit of reassurance/guidence as I really dont want to make my phone an expensive paper weight lol.
Thankyou all in advance, and agin sorry to OP for the Hi jack, but was going to post a thread with same name
Oh 1 last thing, if anyone lives in the South London area who knows what they are doing and fancies sorting my phone out for me, gets some drink tokens from me and a big thank you
Martin
Click to expand...
Click to collapse
1. If you havent unlocked the bootloader yourself it will be still be locked. No need to unlock the bootloader to root. Unlocking is only needed if you want to install custom roms.
2. Since you are still running 2.3.2 Build 3.0.A.2.184 gingerbreak will still be able to root your phone. If you update though to 2.3.3, gingerbreak will be unable to root your phone since the exploit gingerbreak uses has been patched.
If you stay on 2.3.2 all you have to do is run gingerbreak http://forum.xda-developers.com/showthread.php?t=1044765 follow the instruction in the thread then you can uninstall any of the apps (bloat) on this thread http://forum.xda-developers.com/showthread.php?t=1046699 using titainium backup free.
No need to root to remap the O button in emulators. In most the keypad mapping sets O to exit, all you have to do is set exit to another key then O to the key you want.
3. See 2.
May I ask why you want to re-map Circle? I had the hardest time mapping the Cross button because it's like a default Enter button. Finally, I read that if you simply use the touch screen to select the command you want to map, it will let you press the Cross button and map it.
Sorry if I'm off the mark here. That was just a big revelation when I learned that.
Mozza2k11 said:
Models so far?;
r800i (uk, europe, asia?)
r800a (usa, rogers?)
r800at (usa?, at&t?)
r800x (usa? verizon?)
Z1i (china?)
I think other than r800i, others are mostly locked to phone providers? (unless bought sim free in their native country not sure tbh even the r800i is locked to some carriers i think?) I think r800x & maybe r800a are unable to unlock bootladers dues to restrictions from their carriers? Not sure tbh. I think all people in europe got the r800i? Dont know about differences since i got the r800i only
Click to expand...
Click to collapse
hey hey hey hey hey!
r800a = CANADA rogers.
thanks.
AriStar said:
hey hey hey hey hey!
r800a = CANADA rogers.
thanks.
Click to expand...
Click to collapse
Lol my bad , il change it
Mozza2k11 said:
1. If you havent unlocked the bootloader yourself it will be still be locked. No need to unlock the bootloader to root. Unlocking is only needed if you want to install custom roms.
2. Since you are still running 2.3.2 Build 3.0.A.2.184 gingerbreak will still be able to root your phone. If you update though to 2.3.3, gingerbreak will be unable to root your phone since the exploit gingerbreak uses has been patched.
If you stay on 2.3.2 all you have to do is run gingerbreak http://forum.xda-developers.com/showthread.php?t=1044765 follow the instruction in the thread then you can uninstall any of the apps (bloat) on this thread http://forum.xda-developers.com/showthread.php?t=1046699 using titainium backup free.
No need to root to remap the O button in emulators. In most the keypad mapping sets O to exit, all you have to do is set exit to another key then O to the key you want.
3. See 2.
Click to expand...
Click to collapse
Many thanks! I now have a rooted Play, bloatware gone, big smile on my face!!!!
I am trying to unlock my x10a locked to ATT, I purchased the unlocking code but it seems that mi unlocking code cannot be found on the unlocking server.
They offered me the unlocking software which requires to be running android 2.1.
So the deal is that I don’t know what is the version that the cel is running, I will think is not 2.1, but I don’t know how to tell, so how can I update the cel to android 2.1 on a locked phone.
BTW I don’t have any ATT sim
PLS help!!!
flashtool will probably still work!
urenajoseluis said:
I am trying to unlock my x10a locked to ATT, I purchased the unlocking code but it seems that mi unlocking code cannot be found on the unlocking server.
They offered me the unlocking software which requires to be running android 2.1.
So the deal is that I don’t know what is the version that the cel is running, I will think is not 2.1, but I don’t know how to tell, so how can I update the cel to android 2.1 on a locked phone.
BTW I don’t have any ATT sim
PLS help!!!
Click to expand...
Click to collapse
Does your lockscreen have and arc you have to swipe or a straight line at the bottom to unlock (like iPhone)?
If you have the arc swipe to leave lockscreen then you're on 1.6.
If you got the straight swipe line, then your on 2.1.
You can check your Android version by going to:
Settings>About Phone
And check what it says in the Firmware version field.
Yes I have the Arc so I'm on 1.6
I can't go to setting I can only do an emergency call.
urenajoseluis said:
Yes I have the Arc so I'm on 1.6
I can't go to setting I can only do an emergency call.
Click to expand...
Click to collapse
Ahh yea the AT&T restrictions. Forgot about those, on generic firmwares you can boot up without a SIM in the phone.
Well you just have to flash a generic X10a firmware with FlashTool then.
To be safe get the X10a (2.0.A.0.504) firmware.
Not confirmed this myself, but I think going from 1.6 to 2.1 requires you initially flash 2.0.A.0.504 before any other 2.1 firmware (But I'm really not certain about this, so this is just a safety precaution on my part).
This can all be found in the FlashTool thread here:
http://forum.xda-developers.com/showthread.php?t=920746
Then just flash that and then you'll be ready for your cable unlock.
Is there a matrix of FW releases??
urenajoseluis said:
Is there a matrix of FW releases??
Click to expand...
Click to collapse
Yea there is a lot, but if you checked my link you would see there is only 3 generic firmwares for each device (X10i & X10a) in the link.
ok arkedk thanks for the help, will download that and check if it helps.
Why flash old 2.0.A.0.504 firmware without dualtouch?
Here's a step by step guide for AT&T X10a users to update to the most recent global generic 2.1.A.0.435 firmware, which has dualtouch and will be certain to get the official 2.3.3 Gingerbread update directly from SE when available.
http://forum.xda-developers.com/showthread.php?t=1012380
agentJBM said:
Why flash old 2.0.A.0.504 firmware without dualtouch?
Here's a step by step guide for AT&T X10a users to update to the most recent global generic 2.1.A.0.435 firmware, which has dualtouch and will be certain to get the official 2.3.3 Gingerbread update directly from SE when available.
http://forum.xda-developers.com/showthread.php?t=1012380
Click to expand...
Click to collapse
Told him to flash that because I remember someone long ago said that going from 1.6 to the latest 2.1 could cause problems. But was not certain on that so better safe than sorry. And either way he will be able to get 2.3 on 2.0.A.0.504 just aswell as on 2.1.A.0.435. This was just so he could get the device unlocked in the safest possible way I could recommend. He can always just connect the X10 to SEUS after he has unlocked, and then it will update him to the latest 2.1.A.0.435
Sent from my X10i using Tapatalk
On x10unlocked.com it says that I shouldn't have a custom firmware installed.
That's the software the company provided me with.
Please advice
Am i missing something here, but wont pc companion or seus put everyone on the latest official 2.1 version from se with no problems
Then he can unlock easy with flashtool.
Edit
So, download seus or pc companion from se website, instal and follow the instructions. You don't even have to be able to turn the phone on for it to work
Sent from my X10i using XDA App
gregbradley said:
Am i missing something here, but wont pc companion or seus put everyone on the latest official 2.1 version from se with no problems
Then he can unlock easy with flashtool.
Edit
So, download seus or pc companion from se website, instal and follow the instructions. You don't even have to be able to turn the phone on for it to work
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Not any kit. If you want the bloatware branded ATT 2.1 firmware that limits data speeds and blocks apps from unknown sources. Also, most branded kits will not be getting the Gingerbread update.
What i seem to think his problem is is that he cant unlock on SETool because he is on 1.6 and that only works with stock 2.1
So he needs 2.1 on his phone which he is struggling with.
So, use official means to upgrade to the official 2.1, unlock using SETool, then use flashtool to root, install recovery and flash any firmware or custom rom he wants.
Why the worry about dual touch drivers etc etc.....once its rooted you can get rid of bloatware, easily flash generic firmware and receive 2.3 update....
I am confused as to why this poses a problem.
agentJBM said:
Not any kit. If you want the bloatware branded ATT 2.1 firmware that limits data speeds and blocks apps from unknown sources. Also, most branded kits will not be getting the Gingerbread update.
Click to expand...
Click to collapse
gregbradley said:
What i seem to think his problem is is that he cant unlock on SETool because he is on 1.6 and that only works with stock 2.1
So he needs 2.1 on his phone which he is struggling with.
So, use official means to upgrade to the official 2.1, unlock using SETool, then use flashtool to root, install recovery and flash any firmware or custom rom he wants.
Why the worry about dual touch drivers etc etc.....once its rooted you can get rid of bloatware, easily flash generic firmware and receive 2.3 update....
I am confused as to why this poses a problem.
Click to expand...
Click to collapse
Enabling apps from unknown sources isn't as easy as rooting with ATT. Also, data is throttled down to 3G.
You even suggest flashing generic after updating via SEUS or PCC. Why add all these extra steps? This is xda. You can accomplish everything with global generic 2.1.A.0.435 firmware in about 5 minutes with the flash tool.
Well What I did was use Sony Ericsson Update Service, when I connected the phone it told me that there is a newer version so it updated it to firmware version 2.1-update1. So I was able to unlock the phone using multi unlock. Now to get the latest firmware which I understood it is 2.1.A.0.435 with Flash Tool.
Can I go straight from 2.1-update1 to 2.1.A.0.435?
And a last question a generic firmware means that I won’t have all those useless ATT apps on my phone?
Thanks for the help
urenajoseluis said:
Well What I did was use Sony Ericsson Update Service, when I connected the phone it told me that there is a newer version so it updated it to firmware version 2.1-update1. So I was able to unlock the phone using multi unlock. Now to get the latest firmware which I understood it is 2.1.A.0.435 with Flash Tool.
Can I go straight from 2.1-update1 to 2.1.A.0.435?
And a last question a generic firmware means that I won’t have all those useless ATT apps on my phone?
Thanks for the help
Click to expand...
Click to collapse
Yea a generic firmware is one without any branded apps, special setup or limited features.
The latest generic was released for the German generic kits an has build version 2.1.B.0.1. You can find it in my signature.
What do you mean by German generic kits?
I apologize to be a pain but I just getting in the android world.
urenajoseluis said:
What do you mean by German generic kits?
I apologize to be a pain but I just getting in the android world.
Click to expand...
Click to collapse
All Sony Ericsson devices is sold in different regions and has a region specific code. That code determines if your region is eligible for an update (Sony Ericsson rolls out their updates in regions).
Some regions gets updates that others don't get, that's the case with the 2.1.B.0.1, this firmware was only released to the German "kits".
Not a pain at all, we all have to start somewhere
Ok then I will go to 2.1.B.0.1, hopefully I won’t screw up my phone since this is the first time doing this
Please Provide us the Rooted
LT15i_4.0.A.2.368_Generic Global.ftf
for those who have a branded Arc and can not unlock bootloader for root it
and there is no OTA update available for this new update version
Please please give us Rooted 4.0.A.2.368_Generic Global.ftf
Or
there is any other way to root it after update for locked bootloaders
zohaib0001 said:
Please Provide us the Rooted
LT15i_4.0.A.2.368_Generic Global.ftf
for those who have a branded Arc and can not unlock bootloader for root it
and there is no OTA update available for this new update version
Please please give us Rooted 4.0.A.2.368_Generic Global.ftf
Or
there is any other way to root it after update for locked bootloaders
Click to expand...
Click to collapse
If you have spend some time in searching the forum, you would have had the answers faster than posting here and waiting for someone to reply.
There is no current direct method root available if you are running Android v2.3.3 and anything beyond .145 firmware.
If you need to flash a rooted firmware, you need to unlock the bootloader. Otherwise you will not be able to flash it. If you still need a rooted firmware, please search the firmware, there are few of them available i guess.
Hope this helps.
And when asked so nicely, i am sure people are rushing to fix it......
I really hope SE would just go that one step further and would just give us a pre-rooted bloatless global .ftf, even if it's unsupported. It'd be nice for us and would increase their reputation on XDA tenfold
I think your chances of winning the lottery are higher than the chances of them releasing a pre-rooted version
DemonicHawk said:
I think your chances of winning the lottery are higher than the chances of them releasing a pre-rooted version
Click to expand...
Click to collapse
I'm not sure, SE is acting pretty awesomely lately, and I even think they might bring is the next Nexus.
If SE makes their Kernel insecure that's good enough
here ya go: http://forum.xda-developers.com/showthread.php?t=1203729
thread starter said to:
1. flash a non-rooted 4.0.A.2.368 rom first (which you can find here: http://forum.xda-developers.com/showthread.php?t=1204302)
2. and then flash the img file he provided.
one thing that the thread starter left vague was proper instructions for the not so techy users so...
that being said, I am therefore unsure if you can flash the img file with a locked bootloader so get someone else to confirm that for everybody
IMG flash only on those phone which have unlock bootloader
but a branded or sim lock phone have locked bootloader and there is no way to unlock them
SE not open it for sim locked phone
thats why i am asking rooted 4.0.A.2.368 global in FTF format
Howdy everyone,
So I didn't want to post here and spam the forum, but I really need the help of our community....
My phone is from Italy, Wind provider. But now I am in Egypt and they don't seem to push any updates, plus I'm rooted and unlocked, so...
Currently on EMUI 4.1.1 / 6.0 / VNS-L31C113B150
I want to upgrade to Nougat, but there seems so many builds here and upgrade should be in a specific order, which I can't seem to figure out
Doesn't matter if I upgrade to non carrier specific... the only important thing is to be on latest Nougat build, unlocked and rooted
I'm sure many others will benefit from this as well
Appreciate your help
Debrand your phone flashing this update: https://goo.gl/CvuiIb, it's C432B160
Then follow this tutorial: https://goo.gl/pQ9WAw, I advise you the HiCare method if it's possible
first of all, wrong thread, as you probably know, second: there's enough guides explaining how to install nougat/unbrand your phone. also, the nougat ota is available to most, don't know about your provider
Hi everybody,
I'm new here, I have bought my first sony (used) but I notice that the LTE signal is so poor specially indoor. The seller hasn't saw me that the firmware is an UK fw also I live in italy, infact, after a little research, I noticed that there is a carrier's app called EE and the fw version installed is of EE carrier's. The phone is sim unlock. There isn't root and I haven't unlook the bootloader.
My questions are:
- Can I change the stock uk firmware putting in an Italian stock firmware?
- Can I change it without root and without unlook the bootloader?
- How?
- Is there a guide that I can follow?
- Can I change the CSC for preserve the ota upgrade? How? I'd like to change fw preserving OTA update.
I don't wanna unlock the bootloader and root the phone cause I don't want lose the DRM licenses (widevine specially). I'm not interested to rooting or make any modding.
I'd like to put a stock room without bloat apps and with a strong lte signal.
Here the Info about the phone:
F8331
Android 8.0
Phone Software Version: 1302-9157_41.3.A.2.171
Global-LTE3A
Generic-41.3.a.2.171
S1 Boot version: 1299-4832 S1_BOOT_MSM8996_LA2.0_O_204
BASEBAND: 8996-8996.gwn.prodQ-00070-40
Customization version: 1305-7307R8E
Codes phone for CSC doesn't work.
Thanks y for the support
P.s.
Here a link to some pics about the phone:
4shared.com/s/dipBSZcFc
I think it should be possible to just Flash another Regions Firmware via Androxydes Flashtool.
No need for unlock as long as u have any offical fw (XperiFirm comes with Flashtool and downloads offical files)
But I may be wrong tho, this just came to my mind in the first moment
LoaderFabi said:
I think it should be possible to just Flash another Regions Firmware via Androxydes Flashtool.
No need for unlock as long as u have any offical fw (XperiFirm comes with Flashtool and downloads offical files)
But I may be wrong tho, this just came to my mind in the first moment
Click to expand...
Click to collapse
Thanks you LoaderFabi for the suggest, so I will waiting for a confirmation about that.
Meanwhile can y tell me a link to a guide and download the tool?
Anyway, thanks again ?
You can flash any region's firmware without unlocking the bootloader. You need Xperifirm to download the firmware, and Flashtool to flash it.
Kuarinfou said:
You can flash any region's firmware without unlocking the bootloader. You need Xperifirm to download the firmware, and Flashtool to flash it.
Click to expand...
Click to collapse
Ok, and about the OTA's update? Will it be automatically? Or do I have something about? And how?
Can you link me a guide to flash the fw and, eventually, to do something about OTA's update?
Thanks
Sean_Droid said:
Ok, and about the OTA's update? Will it be automatically? Or do I have something about? And how?
Can you link me a guide to flash the fw and, eventually, to do something about OTA's update?
Thanks
Click to expand...
Click to collapse
Since it's an official firmware, you always get updates OTA (i think XZ will no longer get updates but no need to worry). I didn't see any guide to flash, i'll probably today write a guide to flash firmwares.
Kuarinfou said:
Since it's an official firmware, you always get updates OTA (i think XZ will no longer get updates but no need to worry). I didn't see any guide to flash, i'll probably today write a guide to flash firmwares.
Click to expand...
Click to collapse
Thanks y so much Kuarinfou, I will waiting for your guide. I don't remember where I red in this forum about the CSC and that it could not change also flashing a stock fw bringing the OTA's issue... Probably I remember wrong ?
Anyway, Quote me when you will do it.
Sean_Droid said:
Thanks y so much Kuarinfou, I will waiting for your guide. I don't remember where I red in this forum about the CSC and that it could not change also flashing a stock fw bringing the OTA's issue... Probably I remember wrong
Anyway, Quote me when you will do it.
Click to expand...
Click to collapse
https://forum.xda-developers.com/xperia-xz/how-to/guide-flashing-firmware-xperia-phones-t3860048
Kuarinfou said:
https://forum.xda-developers.com/xperia-xz/how-to/guide-flashing-firmware-xperia-phones-t3860048
Click to expand...
Click to collapse
Thanks you so much ?