Database Users

K-JAM - Messaging disappeared from Today screen

OK, so the "Messaging" line has disappeared from my Today screen on my 3-day-old K-JAM. I'm unhappy, I like that little line there.
It isn't listed in Settings | Today | Items.
MemMaid shows it, however; I suspect that's because the registry entry is still present. Here's mine:
HKLM\Software\Microsoft\Today\Items\"Messaging"
DLL : SZ = "" (blank)
Enabled : DWORD = 1
Flags : DWORD = 0
Options : DWORD = 0
Order : DWORD = 2
Selectability : DWORD = 2
Type : DWORD = 4
Is there something wrong here? Can someone compare theirs to mine to see if there's a difference? Is there something else that has to be configured to get it to show up on Today?
(If it matters, this happened after installed Agile Messenger. I downloaded it from PocketGear, installed it, set up an account, and got a notice that an upgrade was available, do I want to install it? Sure! It downloads, then tries to install, but of course it can't because it's already running, I presume. Do I want to terminate the currently running program? Sure! Then the installer bombs, too. Turns out I didn't like Agile Messenger, but uninstalling it was a pain. It didn't show up in Remove Programs nor Running Programs, so I had to soft-reset to kill the task, then use MemMaid to clear it all out.)

Howto create shortcuts pointing to the applications located in settings?

Hi,
I was just wondering if it's possible to create shortcuts to the different applications/services located in the settings section of the Tytn?? I'm trying to add some shortcuts to cLauncher, but the only applications I'm able to locate are those residing in the program section of the phone. Am I doing something wrong, or does this have be done programtically?
Thanks in advance!!
Mogg

You must connect your PDA to the PC with Activesync and then:
- in the desktop of the PC open a New Text Object
- write in the document one of the following string
- save the file as shortcut.lnk (where shortcut is the nome you want give to shortcut)
- copy the file on your PDA (for example in windows\start menu)
and you have the shortcut.
This are the strings (they are for wm2003 but many works also in wm2005)
Settings>Personal>Password>Password = 20#ctlpnl cplmain.cpl,1
Settings>Personal>Password>Hint = 22#ctlpnl cplmain.cpl,1,1
Settings>Personal>Owner Information>Identification = 20#ctlpnl cplmain.cpl,2
Settings>Personal>Owner Information>Notes = 22#ctlpnl cplmain.cpl,2,1
Settings>Personal>Owner Information>Options = 22#ctlpnl cplmain.cpl,2,2
Settings>System>Power>Main = 20#ctlpnl cplmain.cpl,3
Settings>System>Memory>Main = 20#ctlpnl cplmain.cpl,4
Settings>System>Memory>Storage Card = 22#ctlpnl cplmain.cpl,4,1
Settings>System>Memory>Running Programs = 22#ctlpnl cplmain.cpl,4,2 (usato come esempio più sopra)
Settings>System>About>Version = 20#ctlpnl cplmain.cpl,5
Settings>System>About>Device ID = 22#ctlpnl cplmain.cpl,5,1
Settings>System>About>Copyrights = 22#ctlpnl cplmain.cpl,5,2
Settings>System>Screen>General = 20#ctlpnl cplmain.cpl,7
Settings>System>Screen>Clear Type = 22#ctlpnl cplmain.cpl,7,1
Settings>System>Screen>Text Size = 22#ctlpnl cplmain.cpl,7,2
Settings>Personal>Input>Input Method = 20#ctlpnl cplmain.cpl,8
Settings>Personal>Input>Word Completion = 22#ctlpnl cplmain.cpl,8,1
Settings>Personal>Input>Options = 22#ctlpnl cplmain.cpl,8,2
Settings>Personal>Sounds & Notifications>Sounds = 20#ctlpnl cplmain.cpl,9
Settings>Personal>Sounds & Notifications>Notifications = 22#ctlpnl cplmain.cpl,9,1
Settings>System>Remove Programs = 21#ctlpnl cplmain.cpl,10
Settings>Personal>Menus>Start Menu = 21#ctlpnl cplmain.cpl,11
Settings>Personal>Menus>New Menu = 23#ctlpnl cplmain.cpl,11,1
Settings>Personal>Buttons>Program Buttons = 21#ctlpnl cplmain.cpl,12
Settings>Personal>Buttons>Up/Down Controls = 23#ctlpnl cplmain.cpl,12,1
Settings>Personal>Today>Appearance = 21#ctlpnl cplmain.cpl,13
Settings>Personal>Today>Items = 23#ctlpnl cplmain.cpl,13,1
Settings>Connections>Beam = 21#ctlpnl cplmain.cpl,15
Settings>System>Clock & Alarms>Time = 21#ctlpnl cplmain.cpl,16
Settings>System>Clock & Alarms>Alarms = 23#ctlpnl cplmain.cpl,16,2
Settings>Connections>Network Cards = 21#ctlpnl cplmain.cpl,17
Settings>System>Regional Settings>Region = 21#ctlpnl cplmain.cpl,18
Settings>System>Regional Settings>Number = 23#ctlpnl cplmain.cpl,18,1
Settings>System>Regional Settings>Currency = 23#ctlpnl cplmain.cpl,18,2
Settings>System>Regional Settings>Time = 23#ctlpnl cplmain.cpl,18,3
Settings>System>Regional Settings>Date = 23#ctlpnl cplmain.cpl,18,4
Settings>Connections>Connections>Task = 21#ctlpnl cplmain.cpl,19
Settings>Connections>Connection>Advanced = 23#ctlpnl cplmain.cpl,19,1
Settings>Personal>Phone>Phone = 21#ctlpnl cplmain.cpl,20
Settings>Personal>Phone>Services = 23#ctlpnl cplmain.cpl,20,1
Settings>Personal>Phone>Network = 23#ctlpnl cplmain.cpl,20,2
Settings>Personal>Phone>More = 23#ctlpnl cplmain.cpl,20,3
Settings>System>Certificates>Personal = 21#ctlpnl cplmain.cpl,22
Settings>System>Certificates>Root = 23#ctlpnl cplmain.cpl,22,1
Settings>Connections>Bluetooth>Mode = 21#ctlpnl cplmain.cpl,23
Settings>Connections>Bluetooth>Devices = 23#ctlpnl cplmain.cpl,23,1

If you have Total Commander in your PPC.
Duplicate any LNK file (eg copy 1 from folder A to folder B). Rename the extension from LNK to TXT. Open it (the Word software should open it) edit is as massi959 mentioned in the post before. Save. Rename it back to LNK. Done.

Thanks guys the *.lnk files did the trick
Mogg

Hi again,
I have a follow up question:
How can I extract the icons for the control panel applets? Now all my links are working fine in cLaunch, but I'm not able to locate the icons (default icons for the settings I've created shortcuts for)?
Thanks!
Mogg

If you want also to associate an icon to the created connection must download a set of icone, like this
http://www.gpcarreon.com/?p=14
Download the file, unzip and copy it into a folder named "icons" (for example) and then copy the folder in \Memory card\My documents (so you will have \Memory card\My Ducoments\icons)
Now you must add at the created command as mentioned above the following string "?\Memory Card\My Ducuments\icons\gpc.icons.exe,-9" (where -9 is the number of the icon you have chosen).
For example, a complete command will be therefore
22#ctlpnl cplmain.cpl,4,2?\Memory Card\My Documents\icons\gpc.icons.exe,-9

massi959 said:
If you want also to associate an icon to the created connection must download a set of icone, like this
http://www.gpcarreon.com/?p=14
Download the file, unzip and copy it into a folder named "icons" (for example) and then copy the folder in \Memory card\My documents (so you will have \Memory card\My Ducoments\icons)
Now you must add at the created command as mentioned above the following string "?\Memory Card\My Ducuments\icons\gpc.icons.exe,-9" (where -9 is the number of the icon you have chosen).
For example, a complete command will be therefore
22#ctlpnl cplmain.cpl,4,2?\Memory Card\My Documents\icons\gpc.icons.exe,-9
Click to expand...
Click to collapse
Thanks for this information!!! But what I really wanted to know is if it's possible to use the information (resources/icons) which I guess is already in the cplmain.cpl file, is this possible, or is my only option to use a set of icons which isn't already located on the device? (or just use the icons I can see while browsing the files on the device?)
Thanks agian
Mogg

massi959 said:
If you want also to associate an icon to the created connection must download a set of icone, like this
http://www.gpcarreon.com/?p=14
Download the file, unzip and copy it into a folder named "icons" (for example) and then copy the folder in \Memory card\My documents (so you will have \Memory card\My Ducoments\icons)
Now you must add at the created command as mentioned above the following string "?\Memory Card\My Ducuments\icons\gpc.icons.exe,-9" (where -9 is the number of the icon you have chosen).
For example, a complete command will be therefore
22#ctlpnl cplmain.cpl,4,2?\Memory Card\My Documents\icons\gpc.icons.exe,-9
Click to expand...
Click to collapse
Finally, Thanks!

mogg said:
Thanks for this information!!! But what I really wanted to know is if it's possible to use the information (resources/icons) which I guess is already in the cplmain.cpl file, is this possible, or is my only option to use a set of icons which isn't already located on the device? (or just use the icons I can see while browsing the files on the device?)
Thanks agian
Mogg
Click to expand...
Click to collapse
I know only these pointers for the icons in .cpl, but they do not work on TyTN (I suppose they are for wm2003 and wm2005 are different).
?\Windows\cplmain.cpl,-5001 (Warning)
?\Windows\cplmain.cpl,-5012 (HPC to desktop serial)
?\Windows\cplmain.cpl,-5013 (PPC to phone)
?\Windows\cplmain.cpl,-5014 (PPC to desktop)
?\Windows\cplmain.cpl,-5015 (PPC to cloud)
?\Windows\cplmain.cpl,-5020 Clock
?\Windows\cplmain.cpl,-5040 Owner Information
?\Windows\cplmain.cpl,-5050 Power
?\Windows\cplmain.cpl,-5060 (Windows logo over PPC)
?\Windows\cplmain.cpl,-5065 About
?\Windows\cplmain.cpl,-5067 Memory
?\Windows\cplmain.cpl,-5068 Regional Settings
?\Windows\cplmain.cpl,-5070 Backlight
?\Windows\cplmain.cpl,-5075 Contrast
?\Windows\cplmain.cpl,-5080 Screen
?\Windows\cplmain.cpl,-5095 Beam
?\Windows\cplmain.cpl,-5110 Sounds & Notifications
?\Windows\cplmain.cpl,-5131 (Generic Application window)
?\Windows\cplmain.cpl,-5132 (Blank)
?\Windows\cplmain.cpl,-5140 Input
?\Windows\cplmain.cpl,-5150 Menus
?\Windows\cplmain.cpl,-6000 Password
?\Windows\cplmain.cpl,-6100 Remove Programs
?\Windows\cplmain.cpl,-6200 Buttons
?\Windows\cplmain.cpl,-6300 Today
?\Windows\cplmain.cpl,-6400 (Phone handset)
?\Windows\cplmain.cpl,-6500 (Password again)
?\Windows\cplmain.cpl,-7024 (PPC to phone again)
?\Windows\cplmain.cpl,-7025 (PPC to cloud again)
?\Windows\cplmain.cpl,-7026 (PPC disconnected from cloud, with red zig-zag)
?\Windows\cplmain.cpl,-7030 (PPC connected to sqaure suzzle piece)
?\Windows\cplmain.cpl,-7071 (PPC connected to world)
?\Windows\cplmain.cpl,-7140 Connections

Hi,
These are great shortcuts. Is is possible to write a command line string that will link to the main control panel 'personal' tab? I don't want to open a specific applet, but just want to browse the control panel.
Thanks
Jake

Shortcut for password function
Hi massi959,
Is there a way to make a shortcut for the password function (as opposed to password settings)? I just want the password screen to come up when I tap on the link. Using the password settings link does lock the screen on demand but it also brings up the settings window each time the screen is unlocked (some people may actually find this functionality useful). I just want to activate the password lock on demand.
Thanks!

Hey anybody know how i can create shortcut to open start menu.

can somebody tell how to make a shortcut in system tray?

massi959 said:
Settings>Personal>Sounds & Notifications>Notifications = 22#ctlpnl cplmain.cpl,9,1
Click to expand...
Click to collapse
How can I achieve that AND also focus on a specific notification, like "New IM" or "Phone ring" or whatever?

anyone know how to create internet connection shortcut?

Hello
anyone know how to turn on bluetooth stereo shortcut?
thankx

Thanks a lot, very helpful posting!
So long, -ULISSES-

I Phone Theme for Windows mobile 5
I have followed the steps given in pdf document http://www.mediafire.com/?etah1xinxpy
but i am not getting ook and feel of I phd i mean i am not getting the interface what is shown please help
Rayan

Call for improved performance tweaks

Hello guys!
I have taken a look at wiki to find a tweaks that would improve performance/responsiveness of our devices (no matter what hardware or OS you are using) - whether via registry or via settings. I found several such a tweaks (by Cyphol) in Hermes forum:
Performance tweaks that will improve responsiveness of your ROM no matter which you choose (Only tested on WM6 but should work on WM5 too):
1. Improve performance/response time:
- Start > Settings > Phone => Keypad = Off
- Start > Settings > Sounds & Notifications; Under Sound Tab => Disable/Untick Events (warings, system events) - this tweak will BRUTALLY increase the responsiveness of Start menu and Quick Menu 2.7 (because system will no more have to search for sound files in the ROM everytime you tap the screen)
2. Your Windows Mobile device is just like your Windows PC. So, soft reset it before going to sleep (or whenever appropriate) once a day to make it runs good at all time (because of the memory leak when you close the program not all the memory is restored - sof reset restores RAM lost due to Memory leak).
3. Make sure you install the today plugin apps such as Resco Today Plugin etc. on the internal/device memory. Some today plugin can be installed on the storage card but it'll slow down your system performance a bit.
4. Do not install too many apps on the internal/device memory. Leave as much free space as you can on it. Check whether it can be install on the storage card or not. Normally, don't let it become as low as 8MB free but 10MB is enough already.
5. Know what you're doing such as tampering your system registry. Make sure it can be done and you're doing it the right way. If not, then leave it as is.
6. Never let your device go to sleep by itself. Do it manually by pressing the power button everytime when you've finished using your device.
7. Make sure you shutdown the 'Activesync' completely after activesyncing your device with your PC. You can use task manager (X-Button), Magic Button etc or you can use memory applet in setting > System > memory; Running Programs
More tweaks/hints form Nothin:
hint for cookers:
- removing unused keyboards, and today plugins(registry cuts) may have influence too.
- reediting system gfx resources(like gfxes in dialpads etc) may make device faster
- /windows/startup and hklm/init removals may have influence to overall performance and memory usage.
- wise welcomehead, default "windows default" theme, and generally optimised TSK's may have influenece too( good tsk needs stwater and tdywater ONLY(for portrait/landscape,only 2 images, not 4!), i can recommend themegenCE for making good, fast themes. also - themes without start image(today background only) may be good thing.
- stop using x-button! use alternatives - pbar, quickmenu...
- preconfigs are useful - every program may be optimised by its settings - include preconfigs in oempacks(rgu),
- big pagepool is usually..useless, keep it as small, as possible(min. 4 mb, some says, that 4.5 mb is optimal for normal usage)...
i recommend to use sktools to optimise registry - 24% smaller registry.
Aim of this thread: I will collect your hints/tweaks and put them in the first post, then I will update the wiki.
Please post what works for you and is not mentioned on this list!

Registry Tweaks (kudos Nothin):
Never hide the WirelessManager Tray Icon at the bottom.
Don't believe me?
Try it and feel the difference.
This is the key:
[HKEY_LOCAL_MACHINE\Services\WirelessMgr]
"Keep"=dword:00000000 ;<--- (dword:00000000 to hide and dword:00000001 to show)
first thing:glyphcache.
known thing, BUT, not obvious:
my setting:
[HKEY_LOCAL_MACHINE\System\GDI\GLYPHCACHE]
"limit"=dword:00020000
it is 131072 dec.
internet says 32768 value as highest.
nope.
every program, that is using fonts will have faster response with very high values(ie,pdf readers, ebook readers..)
next one:
error reporting:
[HKEY_LOCAL_MACHINE\System\ErrorReporting\UploadSet tings]
"DontUpload"=dword:00000001
controversial one:
[HKEY_LOCAL_MACHINE\System\StorageManager\FATFS]
"EnableCache"=dword:00000001
"CacheSize"=dword:80
and
[HKEY_LOCAL_MACHINE\System\StorageManager\Filters\f sreplxfilt]
"ReplStoreCacheSize"=dword:00000080
small cache is freeing program memory - i CANNOT see almost any merits with bigger cache. both values should be equal.
next one, cache for system sounds:
[HKEY_LOCAL_MACHINE\Snd\Event]
"EventCache"=dword:100
small cache is working ok(default is 1536 kb!)
cache for extrom(useless mem eater,imo,as i do not use extrom,it is clean in my roms, completely empty).
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\ TRUEFFS_DOC1\FATFS]
"DataCacheSize"=dword:00000010
another ones are windows animations, turn it off, always.
qtek9100/wizard specific(may be useful for other devices too..) battery performance tweaks:
[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Cl ass\SDMemory_Class]
"DisablePowerManagement"=dword:00000000
[HKEY_LOCAL_MACHINE\Comm\AsyncMac1]
"Group"="NDIS"
"DisplayName"="AsyncMac NDISWAN Miniport"
[HKEY_LOCAL_MACHINE\Comm\AsyncMac1\Parms]
"DisablePowerManagement"=dword:00000000
"BusType"=dword:00000000
"BusNumber"=dword:00000000
"RebindOnResume"=dword:00000000
[HKEY_LOCAL_MACHINE\Comm\Irsir1\Parms]
"DisablePowerManagement"=dword:00000000
"TransceiverType"=dword:00000000
"IntIR"=dword:00000001
"Port"=dword:00000004
"CheckForHangTimeInSeconds"=dword:00000e10
"BusType"=dword:00000000
"BusNumber"=dword:00000000
[HKEY_LOCAL_MACHINE\Comm\L2TP1]
"Group"="NDIS"
"DisplayName"="L2TP NDISWAN Miniport"
[HKEY_LOCAL_MACHINE\Comm\L2TP1\Parms]
"DisablePowerManagement"=dword:00000000
"BusType"=dword:00000000
"BusNumber"=dword:00000000
[HKEY_LOCAL_MACHINE\Comm\PPTP1]
"Group"="NDIS"
"DisplayName"="PPTP NDISWAN Miniport"
[HKEY_LOCAL_MACHINE\Comm\PPTP1\Parms]
"DisablePowerManagement"=dword:00000000
"BusType"=dword:00000000
"BusNumber"=dword:00000000
Found these in Wiki (WM5 Peformance tweaks):
Disable menu animations
To disable menu animations (sliding in/out) and speed up performance of the UI a bit:
HKLM\SYSTEM\GWE\Menu\AniType = 0 (DWORD decimal)
To change it back to the default:
HKLM\SYSTEM\GWE\Menu\AniType = 6 (DWORD decimal)
Disable window animations
To disable window animations (minimizing/maximizing) and speed up performance of the UI a bit:
HKLM\SYSTEM\GWE\Animate = 0 (DWORD decimal)
And to switch them back on:
HKLM\SYSTEM\GWE\Animate = 1 (DWORD decimal)
Increase font cache
To increase the font cache, speeding up font rendering at the cost of a bit of memory:
HKLM\SYSTEM\GDI\GLYPHCACHE\limit = 16384 (DWORD decimal)
To change it back to the default:
HKLM\SYSTEM\GDI\GLYPHCACHE\limit = 8192 (DWORD decimal)
You can set the value to pretty much anything you like, but suggested values are 4096, 8192, 16384 & 32768.
Enable FileSystem cache
To enable the FileSystem cache, speeding up overall performance at the risk of the cache not being written on a sudden reset:
HKLM\System\StorageManager\FATFS\EnableCache = 1 (DWORD decimal)
To disable again:
HKLM\System\StorageManager\FATFS\EnableCache = 0 (DWORD decimal)
Note that by default, the cache size is zero, and you will see no effect. See "Increase FileSystem cache" below to increase the cache size.
Increase FileSystem cache
To increase the file system cache:
HKLM\System\StorageManager\FATFS\CacheSize = 4096 (DWORD decimal)
To return the file system cache to zero:
HKLM\System\StorageManager\FATFS\CacheSize = 0 (DWORD decimal)
You can set the value to pretty much anything you like.
Increase FileSystem filter cache
To enable the file system filter cache, speeding up overall performance with file mangement:
HKLM\System\StorageManager\Filters\fsreplxfilt\ReplStoreCacheSize = 4096 (DWORD decimal)
To return the file system filter cache to zero:
HKLM\System\StorageManager\Filters\fsreplxfilt\ReplStoreCacheSize = 0 (DWORD decimal)
You can set the value to pretty much anything you like.
Most of these WM5 reg tweaks work on WM6 too. They are included in tweaking programs like Schap's Advanced Config, HTweakC, or HTCustom 1.8.
+WILL CLEAN UP DUPLICIT ENTRIES LATER+

nice tips....thanks

SIP
The SIP menu trick for Voice Command is worth mentioning here. Credit to whoever found it. It involved exporting the CLSID from the registry, deleting it and then re-importing it again. Speeds up opening the menu dramatically.

littld said:
The SIP menu trick for Voice Command is worth mentioning here. Credit to whoever found it. It involved exporting the CLSID from the registry, deleting it and then re-importing it again. Speeds up opening the menu dramatically.
Click to expand...
Click to collapse
Thanks - any clues in which forum to look for it?

wizard user point of view, remember..(omap etc..;/).
event sounds off thing is a must,imo.
------------------
here was bunch of entries, that are typed earlier now.
------------------
hint for cookers:
- removing unused keyboards, and today plugins(registry cuts) may have influence too.
- reediting system gfx resources(like gfxes in dialpads etc) may make device faster
- /windows/startup and hklm/init removals may have influence to overall performance and memory usage.
- wise welcomehead, default "windows default" theme, and generally optimised TSK's may have influenece too( good tsk needs stwater and tdywater ONLY(for portrait/landscape,only 2 images, not 4!), i can recommend themegenCE for making good, fast themes. also - themes without start image(today background only) may be good thing.
- stop using x-button! use alternatives - pbar, quickmenu...
- preconfigs are useful - every program may be optimised by its settings - include preconfigs in oempacks(rgu),
- big pagepool is usually..useless, keep it as small, as possible(min. 4 mb, some says, that 4.5 mb is optimal for normal usage)...
i recommend to use sktools to optimise registry - 24% smaller registry.
more later.. need to get rid of hangover...now.
---------------
sorry for poor english...

Apologies to nothin. Really great tips. Thank you for your input.

Active Sync issues
"8. Make sure you shutdown the 'Activesync' completely after activesyncing your device with your PC. You can use task manager (X-Button), Magic Button etc or you can use memory applet in setting > System > memory; Running Programs"
I'm having some issues with this...every few minutes, ActiveSyc is present in my running programs. I thought this is perhaps due to direct push of emails.
I have disabled directpush so that I only receive email when I manually select send/receive and have only selected a 30 min window (8am-8:30am) for it to automatically check.
Can anyone provide some feedback so that ActiveSync doesn't automatically turn on?
Thanks!

Wow thanks for the tip about the system sounds. Disabled Event Sounds > At least 50% faster response time for my QuickMenu. Sweet.

KarhU said:
Thanks - any clues in which forum to look for it?
Click to expand...
Click to collapse
It is listed here:
http://forum.xda-developers.com/showthread.php?p=1654136#post1654136
Used to take several seconds to open the sip menu and now it's instant. Something to do with the system looking for CLSIDs that are set as input methods which is really slow.

littld said:
It is listed here:
http://forum.xda-developers.com/showthread.php?p=1654136#post1654136
Used to take several seconds to open the sip menu and now it's instant. Something to do with the system looking for CLSIDs that are set as input methods which is really slow.
Click to expand...
Click to collapse
Thanks a bunch, will try myself and frontpage it. Once again thanks for the tip.

Furthermore, i would like to know how to change the location of receiving file through bluetooth. The default is /My Document. I wanna change it to /Storage Card/My Documents. Pls advise.

Added some more Tweaks from the Wiki. Next update will be - links to freeware tweaking apps and formating/cleanup of existing entries.

Hell dude, I've been hacking these for ages and I have to say that your first point on the sounds is something I had no idea about - and it makes a great difference. Thanks a stack!

cool
i followed some of your advise and its really faster compared before
thanks man

bumping it up, how does one remove keyboards?
Thanks

ludester said:
bumping it up, how does one remove keyboards?
Thanks
Click to expand...
Click to collapse
To add/remove items from the SIP list
If you have a few items in your SIP list which you don't use, they can be removed from the list by setting the IsSIPInputMethod for each item you want removed. To remove the SIP from the list, replace the $SIP_CLSID$ in the example below with a CLSID from the Set default SIP tweak.:
HKEY_CLASSES_ROOT\CLSID\$SIP_CLSID$\IsSIPInputMethod\(Default) = 0 (DWORD decimal)
To add it back to the list:
HKEY_CLASSES_ROOT\CLSID\$SIP_CLSID$\IsSIPInputMethod\(Default) = 1 (DWORD decimal)
The following are some of the ClassIDs:
Typical pre-installed:
{42429667-ae04-11d0-a4f8-00aa00a749b9} = Keyboard
{51A2CB38-154E-4C92-A625-A83871C99EC2} = Phone Pad
{42429690-ae04-11d0-a4f8-00aa00a749b9} = Letter Recognizer
{42429691-ae04-11d0-a4f8-00aa00a749b9} = Block Recognizer
{F0034DD0-2AD4-11d1-9CB0-E84BE8000000} = Transcriber
Third Party:
{991A1001-9DCB-11d3-B3C2-000000000000} = AccessPanel
{1E03E205-12D7-4d82-963E-C01889F2EC10} = Claviature
{500AEF94-EBB8-11d4-B1F8-00304F06E973} = Decuma Alphabetic (UNCONFIRMED!)
{95BDB641-772F-11d2-AC6B-204C4F4F5020} = Fitaly
{52429695-AE04-11D0-A4F8-00AA00A749B9} = FleXslide
{4EAD10BD-83AC-44b9-99AE-71958C1B0F0E} = InPad
{C099F78A-924E-4814-A8CF-54E7BD8C2124} = JetKeys
{4128DEE4-EE84-4338-A261-CC704CB32C19} = NanoPad
{42429695-AE04-11D0-A4F8-00AA00A749B9} = NullKB
{025ECAC2-075B-4b82-A972-05E4C17719EA} = PDAMedia Excel
{FA957346-A925-4b68-B9E1-D3D0310F4433} = PDAMEdia KBD
{DE6510EF-6691-401D-B1D3-B9074BFD1555} = PHM Character Map
{81FC2CAD-AD71-4793-9464-36D27630E584} = PHM Clipboard Pane
{9DD23292-0AB3-48F2-A245-0713652A8CEE} = PHM Ext. Keyboard
{FFFD6819-FF21-4e93-B844-A1BBF986B55C} = QuikWriting
{991A1000-9DCB-11d3-B3C2-000000000000} = RapidCalc
{A070BE16-AD56-11d3-BC77-00C06C512035} = Resco Keyboard Pro
{7F0854D9-9ADA-45A9-A3A2-189D9BE8A653} = Smilies Input Panel
{26F56EF0-2CE8-4C46-ADC8-FE0A7DF12DD1} = SPB Fullscreen Keyboard
{5efab5bd-0af5-48f8-abec-6f36e3a0b5af} = TenGo
{8A7968F3-677B-4F64-859C-8A49FCCCB9BF} = TextPlus
{A5304BFA-CC1D-493f-87D3-D9C17147FA32} = TopKey
{4345EA53-B8A5-4E24-A14A-F7C34DD78077} = WordLogic

KarhU said:
To add/remove items from the SIP list
If you have a few items in your SIP list which you don't use, they can be removed from the list by setting the IsSIPInputMethod for each item you want removed. To remove the SIP from the list, replace the $SIP_CLSID$ in the example below with a CLSID from the Set default SIP tweak.:
HKEY_CLASSES_ROOT\CLSID\$SIP_CLSID$\IsSIPInputMethod\(Default) = 0 (DWORD decimal)
To add it back to the list:
HKEY_CLASSES_ROOT\CLSID\$SIP_CLSID$\IsSIPInputMethod\(Default) = 1 (DWORD decimal)
The following are some of the ClassIDs:
Typical pre-installed:
{42429667-ae04-11d0-a4f8-00aa00a749b9} = Keyboard
{51A2CB38-154E-4C92-A625-A83871C99EC2} = Phone Pad
{42429690-ae04-11d0-a4f8-00aa00a749b9} = Letter Recognizer
{42429691-ae04-11d0-a4f8-00aa00a749b9} = Block Recognizer
{F0034DD0-2AD4-11d1-9CB0-E84BE8000000} = Transcriber
Third Party:
{991A1001-9DCB-11d3-B3C2-000000000000} = AccessPanel
{1E03E205-12D7-4d82-963E-C01889F2EC10} = Claviature
{500AEF94-EBB8-11d4-B1F8-00304F06E973} = Decuma Alphabetic (UNCONFIRMED!)
{95BDB641-772F-11d2-AC6B-204C4F4F5020} = Fitaly
{52429695-AE04-11D0-A4F8-00AA00A749B9} = FleXslide
{4EAD10BD-83AC-44b9-99AE-71958C1B0F0E} = InPad
{C099F78A-924E-4814-A8CF-54E7BD8C2124} = JetKeys
{4128DEE4-EE84-4338-A261-CC704CB32C19} = NanoPad
{42429695-AE04-11D0-A4F8-00AA00A749B9} = NullKB
{025ECAC2-075B-4b82-A972-05E4C17719EA} = PDAMedia Excel
{FA957346-A925-4b68-B9E1-D3D0310F4433} = PDAMEdia KBD
{DE6510EF-6691-401D-B1D3-B9074BFD1555} = PHM Character Map
{81FC2CAD-AD71-4793-9464-36D27630E584} = PHM Clipboard Pane
{9DD23292-0AB3-48F2-A245-0713652A8CEE} = PHM Ext. Keyboard
{FFFD6819-FF21-4e93-B844-A1BBF986B55C} = QuikWriting
{991A1000-9DCB-11d3-B3C2-000000000000} = RapidCalc
{A070BE16-AD56-11d3-BC77-00C06C512035} = Resco Keyboard Pro
{7F0854D9-9ADA-45A9-A3A2-189D9BE8A653} = Smilies Input Panel
{26F56EF0-2CE8-4C46-ADC8-FE0A7DF12DD1} = SPB Fullscreen Keyboard
{5efab5bd-0af5-48f8-abec-6f36e3a0b5af} = TenGo
{8A7968F3-677B-4F64-859C-8A49FCCCB9BF} = TextPlus
{A5304BFA-CC1D-493f-87D3-D9C17147FA32} = TopKey
{4345EA53-B8A5-4E24-A14A-F7C34DD78077} = WordLogic
Click to expand...
Click to collapse
Thank You very much. I am a tweaking enthusiast much like you and my HTC touch is working very well.
Another tweak I found was similar to this one
[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Cl ass\SDMemory_Class]
"DisablePowerManagement"=dword:00000000
Instead of SDMEMORY_Class there was MMC_Class there too and it also had the disablepowermanagement option.
I've disabled that option so it does go into power management mode.

for Troditional Chinese Readers:
Native Imputs:
{E18BFD41-BEB8-11D1-8F9F-00AA00B58D45}="注音"
{E18BFD44-DF36-11D1-90DD-0000F81E0CE9}="倉頡"
{124D7CDC-CF2D-418F-8BB4-4395AD048B79}="手寫板"
{5AAFAF99-8D99-4466-A66D-95C44B608A84}="全螢幕手寫"
China FEP_No5en: (simplified Chinese included)
{3671431C-F947-4197-95BB-23723DC47D6E}="Ping Ying"
{15F1353C-E409-4dd4-B3D1-6B58F43792AE}="Chinese Serch"
{9668E639-80A6-4899-B03A-B7151C870657}="Chinese Writing"

littld said:
It is listed here:
http://forum.xda-developers.com/showthread.php?p=1654136#post1654136
Used to take several seconds to open the sip menu and now it's instant. Something to do with the system looking for CLSIDs that are set as input methods which is really slow.
Click to expand...
Click to collapse
Hi, i do not understand? If i remove "HKCR\CLSID" and then add it again it's the same **** like before. Why should there be an increase in speed?

HTC - 6 Tab Home PlugIn & Customization

Again the idea was to have all the registry setting ready after a Hard-Reset or a ROM-Flash. The last two months I have made my Cruise a ROM lab testing every ROM I found to this FANTASTIC Forum.
And I'm very happy that I have a PDA that can be customizable.
So here is the cab ...
http://www.turboupload.com/download/00pEcIE03vrj/HTC_6TabHomePlugIn.cab
It contains:
- HTC Home PlugIn Setting/Customization (Start / Settings / Today / HTC Home)
- HTC 6 Tab Home PlugIn
HKLM\Software\HTC\HTCHome
New string "Tabsetting = 1,2,3,4,5,6"
1 = Clock tab
2 = Favorite People tab
3 = Weather tab
4 = Launcher tab
5 = Music tab
6 = Profiles tab
Removed "HKLM\Software\OEM\MASD\Quickdial"
- dd/MM/yy Format
HKLM\nls\overrides\SSDte = "dd/MM/yy"
- HH:mm:ss Format
HKLM\nls\overrides\STFmt = "HH:mm:ss"
- Speedup Touchflo By increasing Frames Per Second
HKLM\Software\HTC\Biotouch\Biotouch\DownFPS = "30"
HKLM\Software\HTC\Biotouch\Biotouch\LightFPS = "30"
HKLM\Software\HTC\Biotouch\Biotouch\UpFPS = "30"
- Activate GPS Photo in Camera
HKLM\SOFTWARE\HTC\Camera\P9\Enable = "1"
- No ActiveSync if Phone is Disconnected
HKLM\Software\Microsoft\Windows CE Services\AllowLSP = "0"
Again the THANKS and the Gredits goes to people who discovered these.

"Play All Songs" in WMP ?

Hi,
I'm making a script to launch WMP when my A2DP headphones are connecting to my phone, but I'd like to play all my songs too. In Titanium, there's the Music panel with the "Play all songs" button, and I'd like to know if it is possible to create a shortcut making the same thing.
Thanks

u could maybe make a playlist (.asx) with Mortscript and launch it...

nop, it's not what I'd like, and this for a good reason : launching WMP with a huge playlist (more than 500 songs) and you'll have to kill it... But launch WMP with the "Play All songs" button, and it works fine everytime
That's why I insist on the "play all songs" thing

ah.
well u could use mortscript to detect that the player is idle and then queue up the next track...

howdykeith said:
ah.
well u could use mortscript to detect that the player is idle and then queue up the next track...
Click to expand...
Click to collapse
Well, yeah... But it is just 1000x longer than just finding the good parameter for WMP or the right way to launch it playing all the songs ^^
But if I don't find a thing, maybe I'll make this like you said

Code:
#If Nitrogen running
If ( ProcExists( "Nitrogen.exe" ) )
#WHAT's PlayStatus??
#Paused
If ( PlayStatus <2 )
TickerDatum = "Nitrogen is Paused"
Else
#Playing song
SongTitle = RegRead( HKLM,"\System\State\Nitrogen\","SongTitle" )
SongArtist = RegRead( HKLM,"\System\State\Nitrogen\","SongArtist" )
TickerDatum = ( SongTitle eq "(none)") ? "Nitrogen is Playing" : SongTitle & " by " & SongArtist
#vol
EndIf
SongVol = RegRead( HKLM,"\System\State\Nitrogen\WM_NTG_GETVOLUME","WM_USER+3005" )
TickerDatum = (SongVol) ? "Nitrogen is Mute" : " Nitrogen Volume is at " & SongVol & "%"
#TimeElapsed - secs
#TimeTotal - secs
SongElaS = RegRead( HKLM,"\System\State\Nitrogen\","TimeElapsed" )
SongTotS = RegRead( HKLM,"\System\State\Nitrogen\","TimeTotal" )
TickerDatum = "At: " & (SongElaS / SongTotS) & "% of the Track... " & SongElaS & " Seconds" & " of " & SongTotS & " Seconds"
Call("PostStatus", TickerDatum, Delay, Icon)
Else
#wmp
If (RegKeyExists( HKCU,"System\State\MediaPlayer" ))
Icon = "CD1"
SongTitle = RegRead( HKCU,"System\State\MediaPlayer\","Title" )
SongArtist = RegRead( HKCU,"System\State\MediaPlayer\","WM/OriginalArtist" )
SongTrack = RegRead( HKCU,"System\State\MediaPlayer\","WM/TrackNumber" )
SongElapsed = "T" & RegRead( HKCU,"System\State\MediaPlayer\","Elapsed" )
sleep(Tick)
If (not SongElapsed eq ("T" & RegRead( HKCU,"System\State\MediaPlayer\","Elapsed")) )
TickerDatum = SongTitle & " by " & SongArtist
EndIf
EndIf
EndIf
Here is some code that doesn't look like i ever tested (PlayStatus?)...

Back to my script project, and can't find the simple code to just launch WMP and play all the files in the library...